Version 7.0.0.59 without Intellisync

I just upgraged from version 6.0.0.30 to version 7.0.0.59. The new version has replaced Intellisync with some new synchronization software.
Is anyone else finding that this new version is incredibly s l o o o o o o w compared to the prior version and that the conflict resolution step in version 6 was far easier to use than in version 7???

Hello,
As you continue to read other threads, I believe you will discover plenty of support to your experience...as well as methods to fall back to the prior versions of the Desktop Software, if that is desired.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Have been running version 4 for a week without problems. Today, downloaded MS live security update, and have had problems since. when I click on a favorite site, it takes 20 to 40 seconds before the page load's and the same if I click a link on the page.

    been running version 4 for a week without problems. Today, downloaded MS live security update, and have had problems since. when I click on a favorite site, it takes 20 to 40 seconds before the page load's.'''bold text'''

    http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

  • If i have purchased garageband for Ipad... can i download the IOS version on my iphone 4 without paying again?

    If i have purchased garageband for Ipad... can i download the IOS version on my iphone 4 without paying again?
    Or do i have to pay again?
    thanks,

    If you've previously paid for the iOS version, you can. If you've previously paid for the Mac version but not the iOS version, you can't.
    (64100)

  • Warning-version 01 was created 20091016 without an EC

    hi
    when i run the validation report for a material there appears a warning saying "version 01 was created 20091016 without an EC".what does a version exactly mean here.how to rectify this.
    Regards
    Punam

    Which T.code are u using for this validation?
    provide the Message number also is this a warnng or error message?
    revision levels: in case if you make any changes in the material we can have a revision level in the mateirl master, this will be used inthe engineering industries specially .
    reg
    ds

  • I already updated! The version iOS 6.0.1 without include me the McTube or MxTube. The McTube free I was using, capacity for 10 videos download only. I need McTube Pro free! What's your Idea?

    I already updated! The version iOS 6.0.1 without include me the McTube or MxTube. The McTube free I was using, capacity for 10 videos download only. I need McTube Pro free! What's your Idea?

    I already updated! The version iOS 6.0.1 without include me the McTube or MxTube. The McTube free I was using, capacity for 10 videos download only. I need McTube Pro free! What's your Idea?

  • HT4623 I've tried to update the latest version however I've been without a phone for a day as it seems to be stuck on an iTunes logo. I've tried updating via iTunes inc updating latest version but my phone still won't reset. Any ideas? Please help

    I've tried to update the latest version however I've been without a phone for a day as it seems to be stuck on an iTunes logo. I've tried updating via iTunes inc updating latest version but my phone still won't reset. Any ideas? Please help

    See Here  >  http://support.apple.com/kb/HT1808
    If using Windows...
    Temporarily disable your firewall and antivirus software and try again...
    http://support.apple.com/kb/TS1379
    See iTunes Connection Issues here...
    iTunes for Windows: Troubleshooting security software issues
    EMPJ wrote:
    Spends 3 hours downloading latest software then says unable to restore
    If the issue persists, take the Device to any Apple Store for evaluation. Be sure to make an appointment first.

  • How to make previous version documents(CS1 and CS3) without extension  readable in InDesign CS5

    I have some previous version documents of CS1 and CS3  on Mac  which have been saved without any extension e.g 300, CS3doc etc.
    When I open such documents in InDesign CS5 they appear to be unreadable .  Only on  selecting 'All documents' filter  I am able to open those documents.
    I want to make all such documents (which are without extension) readable with 'All Readable Documents ' also .
    How I can do that, please  help me !!!!!

    The first thing I'd do is make sure the issue is really what I suspect it is - i.e. I suspect your extension-less documents don't have the proper type and creator.
    If you fire up a Terminal window, you should be able to use the GetFileInfo command to check one of the files:
    Assume 'sampleFile' is sitting on your desktop, you'd do
    GetFileInfo ~/Desktop/sampleFile
    (not sure when/whether GetFileInfo is installed on a Mac - I think it used to be part of Apple's developer tools, but on my Snow Leopard it resides in /usr/bin)
    Check what it says for 'type' and 'creator'.
    If these are not correct, we've confirmed that that's the reason why they don't show up in your file dialog.
    If the issue is type/creator related, I can think of the following options:
    a) Change your code to accept ANY file type/extension - I suspect this would work (not tested!):
    openFileDialog->AddType( '????' );
    If memory serves right, '????' should be accepted as a wildcard.
    b) correct the file types BEFORE they are viewed in the File Dialog - for example, if these files are in a very specific folder somewhere, you might be able to scan the folder, and correct their type and creator (e.g. iterate through all extensionless files in folder 'xyz' and change their type and creator). A lot depends on how those files get there, and whether they are tied to a specific folder or not - are they 'old' files, or are they being generated in some workflow? If they're all over a user's system or all over a file server, such pre-scanning and cleaning up file types approach will be a no-go.
    Cheers,
    Kris

  • How do I activate previously store bought CS6 Student version on a new computer without optical drive?

    I have a store bought student version of CS6, which I have had on my old computer for the last 2 years. I now bought a new computer without an optical drive and I tried downloading the software from Adobe. When I entered the previously assigned serial number it said "The serial number you entered is invalid. Please try again.  If the problem persists, contact Customer Support"  well....there is no real customer support that I can find, so any help would be appreciated.

    Error "The serial number is not valid for this product" | Creative Suite
    if you can't solve the problem using the above, contact adobe support -
    https://helpx.adobe.com/contact.html

  • How To Downgrade iMovie HD to NOT HD version, 6-5 or 4 without CD software?

    I won my Power PC G4 on a computer giveaway in my college. They didn't provide any software. I upgrated to Mac OS X (I bought the software) I have the 10.4.9 version installed.
    I had iMovie (don't know exactly which version) on my Mac, but I never had an original software CD.
    I bought I Life '06 to be able to get the new updated versions of everything, including iMovie.
    Unfortunatelly my computer does not support HD, so I was wondering if there is any way I could possibly DOWNGRADE from the iMovie HD to the previous NOT HD version, I don't know if it was iMovie 6, iMovie 5, or iMovie 6... But without having the original CD software.
    Thank you for your help!
    Power PC G4   Mac OS X (10.4.9)   iLife '06
    Power PC G4   Mac OS X (10.4.9)   iLife '06

    As Niel pointed out a few weeks ago, iMovie 3.0.3 - which was free - is still available for download from Apple here.
    However, it's not as stable, or as useful, as later versions, and you do need to be careful with it: DO NOT EMPTY THE IMOVIE TRASH when you use this version, until you've completely finished your project and have backed it up, or burned it to a disc or sent it back to tape. Emptying the Trash can sometimes corrupt projects when you're using iMovie 3.0.3.
    It should be able to co-exist with other versions of iMovie in your Applications folder, and it has its own 'Preference' file, so it shouldn't cause problems if you have both iM 3.0.3 and iMovie HD on the same Mac. But you may not be able to open, in iM 3.0.3, a project created with a later version.
    I don't know, but there may be a QuickTime conflict, too, and you just might have to downgrade to an earlier version of QuickTime if you have problems with iM 3.0.3.

  • Need to put old version CS4 on new laptop without CD drive

    I have the CS4 and I need to download onto new laptop without a CD drive.  Any advice?
    I tried to migrate the software but it will not open.  I got an error message and Adobe chat was not able to help.

    You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

  • How to convert editable pdf into non-editable version for printing option only without setting up passwards?

    I am using IOS system with pdf preview functions. I try to convert editable pdf file into read only for others to print without access to edit the file.
    The only way I can do now is to convert to jpeg for each page and convert back to pdf then combine all pages together. It takes a lot of time in this case.
    Can anyone tell me how to do the conversion without setting up passwards for protection?
    Thank you very much!

    First of all, don't use all CAPS as it means shouting.
    Second, your question is completely off-topic for this forum which discusses Microsoft Office Outlook.
    Third, this is a peer-to-peer forum, don't count on anyone calling you. If you want dedicated support from Microsoft, contact Microsoft Support directly.
    Anyway, you can insert the picture in to OneNote and then have OneNote convert it into text. This usually isn't very accurate for scans though.
    A better solution would be to use a application which is dedicated to OCR. There are various out there. I suggest you try their demo versions to find out which works best with your handwriting.
    Robert Sparnaaij
    [MVP-Outlook]
    Outlook guides and more: HowTo-Outlook.com
    Outlook Quick Tips: MSOutlook.info

  • Can I use the gps on an ipad mini 3 (cellular   wifi version) or an iphone 6   without a cell plan?

    I just want an iPhone 6+ or iPad mini 3 to use with GPS capability. If I buy one without a cell plan will the GOS still work?

    5nick95,
    Try ForeFlight ForeFlight iPad & iPhone Tech Specs, and Support.

  • The new version of firefox, which installed WITHOUT my approval, FORCED an update to Adobe Flash. This new Flash plugin crashes over and over and over - to the point that I cannot use firefox anymore. This is one very angry customer. Argh.

    firefox installed update without approval. big NO NO.
    firefox forced update of adobe flash. I hate this crap.
    firefox + new flash = totally unstable.
    crash after crash after crash - cannot use.
    customer angry.
    very angry.
    argh.

    '''I fixed mine by removing the Ask.com extension.'''
    Tools
    Add-ons
    Settings icon
    View Recent Updates
    Ask.com '''DISABLE'''
    Running FF 8.0 on Windows 7 (64-bit)

  • HT1338 Older Mac running Tiger 10.4.11. and Flash no longer works. Upgraded version installed and left me without any Flash support at all??

    I recently attempted to upload the latest FLASH PLAYER. My older Mac (G4) works wonderfully as a desktop computer, so I NEED a flash player
    badly, but now it says that Adobe no longer supports older Mac Power PCs! What's up with that?? Some of the best and most desirable computers
    ever made are of no interest to Adobe?
    I there a work-around to eliminate the need for Adobe's Flash Player?? Another Flash version......can you say Macromedia? HELP

    You can check here:  http://www.adobe.com/products/flash/about/  to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version,10.3.183.23 or later, is for Intel Macs only running Tiger or Leopard, as Adobe no longer support the PPC platform. Version 11.4.402.265 is for Snow Leopard onwards.
    * Unhelpfully, if you want the last version for PPC Macs, you need to go here:  http://kb2.adobe.com/cps/142/tn_14266.html  and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here:  http://kb2.adobe.com/cps/838/cpsid_83808.html
    You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
    http://kb2.adobe.com/cps/909/cpsid_90906.html
    and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.
    (If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, contributor Texas Mac Man suggests the following solution which fools the site into thinking that you are running the latest version:)
    Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
    But possibly that only works with Leopard.

  • Trying to Install Older Version of Adobe Acrobat Pro without Physical CD's

    I purchased Acrobat Pro in 2007, and i'm trying to install it on a newer desktop. I have the product Registered with it's serial number, but when i try to activate the trial version it says the serial number is not valid. How can i re-install Adobe Acrobat Pro?

    Download Acrobat products | 9, 8
    Mylenium

Maybe you are looking for

  • How is the font size calculated in pixel sized documents?

    Hello to all, I am working with Illustrator CS4 on a web design. In the document setup, I set the size to 1000*1600 pixels. Then, I tried to add some text in font size 12 pt. The font appears *very* small. My objective was to use the same font size s

  • Database fields and tables for BOM

    Please help on following points which are from requirement on the new program i have to develop. (1) Source the Material Quantity The new program will need to search all plant/s if the plant field in the search criteria is blank, or alternatively, se

  • Filesize a problem when uploading a file to Oracle via JDBC?

    Hello, I am trying to upload a file via JDBC to an Oracle Database (into a BLOB field). The file is converted to a byte array for uploading. While processing the request the following error is thrown : [31.08.05 09:58:33:151 CEST] 40cc40cc SystemErr

  • Need help with capturing live performance with 2 cameras

    I captured a live performance with two different cameras, one was AVCHD the other in DV. In Adobe, is there a way to down convert the large AVCHD to match the HD so that I can do a multi-camera edit? Here are the specs of the videos Here are the two

  • Query to check duplication of ranges

    Dear All, I store a few ranges (NUMBERS) in the table as lower value and upper value. so my table looks something like this : lower upper 1 5 7 9 23 32 14 17 I want to check the duplication of ranges for example if there are ranges like 1 - 5 and 3 -