Version category field for material type trading goods in mm01

hi everyone,
In MM01 for trading goods material type, we have version category field in basic data1 as list box, but there is no values in it. As we are using SAP DBM 7.0. can anyone tell me how to get or configure those values in list box?
Thanks in Advance!!!

I could only find that this tcode can be used for maintaining the version types. VTCU.
Could not help u much as this version is not activated in my system

Similar Messages

Purchase Requisition / Order: Account Assignment Category for material type

Hi,
When creating a PR or PO for one specific material I would like the system to propose a specific account assignment Category for this material. It shouldn't allow the user to change this account assignment category.
Is it possible? How should I proceed?
Thanks in advance.
Luis.

I dont think there is any standard procedure for doing this.
My idea would be to use a user exit say EXIT_SAPLMEREQ_010 for PR and a similar exit for PO and code a Error message check for Material type and account assignment combination.
For ex : EXIT_SAPLMEREQ_010 is a exit which is called during check in a PR . SO when the user enters a combination of Material type and Acc assignment u can check for the requirements.

Category for material type MAT_KMAT does not exist for configurable product

Hi,
Trying to download Confihurable product from ECC to CRM,for this I am getting the below error.
"Category for material type MAT_KMAT does not exist"
For this , i have successfully downloaded the object DNL_CUST_PROD1, but still the material type MAT_KMAT does not exist under R3PRODSTYP in COMM_Hierarchy transaction.
kindly let me know how to get the material type MAT_KMAT under R3PRODSTYP .
Regards,
PV

Hi
Please go through the below pdf document. This will be useful.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9076a9a4-923c-2c10-7483-d997a9eae976?quicklink=index&overridelayout=true
Regards

Hierarchy for material types does not exist

Hi,
I am doing an intial configuration in SRM 7.0 we have actvated extended classic and PPS activated.
In the first level of configuration ai heve set up the logical systems and the system landscape.
when i am in R3AS
DNL_CUST_BASIS3
DNL_CUST_PROD0
DNL_CUST_PROD1
DNL_CUST_SRVMAS
the above objects wre green when i executed
For the object MATERIAL
I am getting an error
Hierarchy for material types does not exist
Message no. COM_PRODUCT_API000
Diagnosis
Before materials are imported from the ERP system, the material types from the ERP system must exist as categories in CRM/EBP. When the Customizing object DNL_CUST_PROD1 is imported, the material types are imported automatically and created under the category MAT in the category hierarchy R3PRODSTYP (product subtype).
Procedure
Check whether the ERP system material types have been imported successfully and exist as categories.
Proceed
If necessary, import the Customizing object DNL_CUST_PROD1.
Kindly guide me

Hi,
It looks you have not configured the middleware basic settings. Queue should be registered in SMQR transaction.
Please follow the configuration guides in SAP Solution Manager or offline downloaded version in SAP Service Marketplace.
http://service.sap.com/srm-inst
Regards,
Masa

Authorization for material type and material views

Hello all,
I would need to restrict a user group, in creation (MM01) and modification of material master, based of type material and material views.
The authorization, for each user should be:
- view, modify and create of all views, except accounting (B) for type material ZFER;
- view, modify and create of all views for type material ZOFF.
I tried to create 2 roles in PFCG with the following authorization objects:
1) M_MATE_MAR (Material Master: Material Types) ACTVT = *, BEGRU = ZFER and M_MATE_STA (Maintenance Statuses) ACTVT = *, STATM = A,C, D, E, F, G,K, L, P, Q, S, V, X, Z (excluding B)
2) ) M_MATE_MAR ACTVT = *, BEGRU = ZFER and M_MATE_STA ACTVT = *, STATM = B
but the effect is to be authorized, to all view for material type ZFER and ZOFF.
I have already updated the authorization group of the type materials (OMS2).
Is there a solution for this problem?
(component version SAP ECC 6.0)
Thanks.
Regards,
Luca

I tried to create 2 roles in PFCG with the following authorization objects: 1) M_MATE_MAR (Material Master: Material Types) ACTVT = *, BEGRU = ZFER and M_MATE_STA (Maintenance Statuses) ACTVT = *, STATM = A,C, D, E, F, G,K, L, P, Q, S, V, X, Z (excluding B) 2) ) M_MATE_MAR ACTVT = *, BEGRU = ZFER and M_MATE_STA ACTVT = *, STATM = B
- Are both these roles assigned to the same user? then your purpose is not solved, It is more or less like giving full authorization.
- One role should be
M_MATE_MAR (Material Master: Material Types) ACTVT = *, BEGRU = ZFER and M_MATE_STA (Maintenance Statuses) ACTVT = *, STATM = A,C, D, E, F, G,K, L, P, Q, S, V, X, Z (excluding B) for view, modify and create of all views, except accounting (B) for type material ZFER. This should be assigned to one user
- Second role should be
M_MATE_MAR ACTVT = *, BEGRU = ZOFF and M_MATE_STA ACTVT = *, STATM = * for view, modify and create of all views for type material ZOFF. This role should be assigned to the second user.
Regards,
Subbu

What is "Category" field for?

In the iTunes List View, you can change or enter info for most columns for a song, for example the name column, by simply clicking in that column. The insertion point appears and you can type or change the name of an item. However, this doesn't happen for the Category field. If you click it, no insertion point appears. Plus, the Category field doesn't appear in the "Get Info" window.
What is this Category field for?

I believe Category is mainly used for Podcast tagging where the author of podcasts can categorize the type of podcast. For example, Cartoon, Music, Comedy, Spoken Word, or whatever categories you normally see for podcasts in the Apple Store.
If you have podcasts, go to the podcasts and turn on the Category header to see what I mean.
Patrick

Input tax 0 for material type ROH

MM Experts,
My client is asking that for material type ROH, input tax always zero which cannot be changed even by purchaser while making purchase order.
Did anybody have worked on similar requirement. Pl. let me know what are the possibilities are there to accomplish the said requirement.
Waiting for your quick response.
Thanks.
Vijay

maintain a tax code with FI help having value = 0 (i think that is done via FTXP)
do you have purchase inforecord for all the materials having mat type = ROH, if yes then maintain tax code with zero value here and it will be default in PO
if not using info record check below thread
Default Tax Indicator in PO line item for a Material
Also to make tax code field un editable while in ME21N (once it is defaulted based on above rules) you can use define screen layout at document level setting in SPRO for PO. SPROmm-purchasing-PO-- define screen layout at document level -select ME21NGR/IR control-make tax code as display
yogesh
Edited by: Yogesh Lohiya on Jan 20, 2012 12:07 AM

Finding the related field for "Leave Type" from the BI content in HR modul

Hi good after-noon!!
Can any one help me out in finding the related field for "Leave Type" from the BI content in HR module?
Regards,
Suman.

Hi Suman ,
U can get the information in KTART field in PA2006 table in SAP. This field can take values like annual leave type, long service leave, study leave etc....
Regards
vamsi

MRP run for Material type

Hi Gurus,
I want to run MRP for particular material type say for all my raw materials or semi-finished.
How it can be done?
I have used to user exit in MD01, for running MRP for a particular MRP controller and also for MRP type like PD or VV etc.
Srini

Srini,
in this same exit you can include the parameter for material type "M61X0001" to able to select the materials based on a field like MRP type.
In transaction SMOD you can check the documentation on this development.
take help from your ABAP person.
come back for further discussion.
regards
Ritesh

VL10B delivery for material type ROH

Hi
We have a scenario in which we are able to create STO type UB for material type ROH (Raw Material)
but when we create delivery with TCode VL10B it gets created but with no line items and no error messages.
The Same scenario works for material type FERT (Finished Product)
Is there any setting that i am missing for doing delivery with reference to STO via Tcode VL10b for material type ROH.
the sales views are already extended for ROH material.
Please guide.
Thanks
Nimit

Hi,
Check if you have created the materials ROH in the organizational levels for SD (ie: if there are entries in table MVKE).
I hope this helps you
Regards
Eduardo

Field SNPLC is not an entry field for resource type 02

While transferring resource, getting the error message below;
Field SNPLC is not an entry field for resource type 02
Message no. /SAPAPO/DMRES149
Is that something to do with CFC9??
Please help.

Hi,
You have defined the resource type as 2 ( single activity resource) which is PPDS relevant but in the Planning parameters tab of the APO resource you have defined it as SNP relevant.( Not ticked the Not SNP relevant)
Request you to make tick in the Not SNP relevant field and then try Ciffing.
Since SYSFAIL has happend request you to clear the failed Queues and then CIF it.
Thanks,
nandha

Field for Record Type

Hi All,
          I have to show one output in ALV.One of the o/p fields is "Record Type" which has possible entries as 1.Current Stock 2. Safety Stock 3. Process Order 4.Planned Order.
Is there any field in any table for record type with above mentioned possible entries.Even if a field for Order type is there please mention.
Thanks in Advance,
Saket.

Hi
Please check this
/BI0/OIRECORDTP                Record type
CFRECTY                        Record type
FE_RRCTY                       Record type
MAFID                          Record type
P106_RTYPE                     Record type
PAR_TIREG                      Record type
PES_190TIP                     Record type
PPT_TSREC                      Record type
RECNO                          Record type
RECTP_EBES                     Record type
RSART                          Record type
SISATZ                         Record type
VVISATZA                       Record type

No external no.assignment possible for material for material type HALB??

no external no.assignment possible for material for material type HALB??... message no:m3317
i got this error msg while i try to create external material via mm01
material: pump
industry type: mechanical engineering
material type: semi finished product
after pressing enter error came...

Hi
If you created number range already, then you need to remove the number range and recreate the same with external number range w/o check
Try it out.
Thanks
Raman

External No Range for Material type

How to assign External No range for material type
A to zzzzzzzzzzzzzzzzz System is showing this number range
But it is not allowing me to assign to material group
How to assign??

Hello,
Why you are assigning number range to material group.
you are maintaining number range for material type and assigning it to material group this is little confusing.
Thanks & regards,
Vinay

A/c assignment category for material type

Hi Gurus,
1) Can I fix a/c assignmnet category for a material type? For example, I want a/c assignment category K for NLAG materials. If while creating PO for a NLAG material, somebody forgets to enter A/c assignment category, it should give an error msg "A/c assignment category is manadatory for the material type"?
2) If Gr-based IV is not checked in ERS PO, then while running MRRL statement, what type of error should come and what will be the remedy at that stage?
Thanks,
Kumar

> 1) Can I fix a/c assignmnet category for a material type? For example, I want a/c assignment category K for NLAG materials. If while creating PO for a NLAG material, somebody forgets to enter A/c assignment category, it should give an error msg "A/c assignment category is manadatory for the material type"?
You Cannot Fix account assignment Category for a Material type.
> 2) If Gr-based IV is not checked in ERS PO, then while running MRRL statement, what type of error should come and what will be the remedy at that stage?
GR Based IV is an Optional. If you Activated this in Vendor MAster and PO then System wont allow to Post IR before GR.

Version category field for material type trading goods in mm01

Similar Messages

Maybe you are looking for