Version conflict using "replaces"

I am trying to upgrade my system, but archboot requires lzo2 and in the testing repository, lzo2 has been replaced by the new lzo package.
pacman -Qi lzo
shows that lzo provides, replaces, and conflicts with lzo2, but archboot still fails with:
lzo2 and lzo are in conflict
pacman -Qi archboot shows:
lzo2>=2.06-1
When I install lzo2 and archboot and try to upgrade lzo, I get:
error: failed to prepare transaction (could not satisfy dependencies)
:: archboot: requires lzo2>=2.06-1
Is this expected behavior or is this a bug in pacman's dependency handling?

Allan wrote:lzo needs to have a versioned provide
I am going to add it and push a new lzo revision to [testing] soon.
But IMHO archboot should not use version specifier, lzo 2.06 has been released long time and there is no way back.

Similar Messages

Version conflict between XE's ODP and VS2005/ODT's ODP

Suppose you've just built an application with VS2005, .NET Framework 2.0, and Oracle Developer Tools for Visual Studio .NET with Oracle10g Release 2 ODAC 10.2.0.2.20 which uses Oracle.DataAccess.dll version 2.102.2.20. You want to be able to run the application on a client machine that has an Oracle XE database installed locally. Perhaps you even require that the client machine runs the Oracle XE Client. Unfortunately, even with both there seems to be a version conflict regarding Oracle.DataAccess.dll. Can anyone say what are the best practices for such a situation?

Situation:
1) Oracle XE (database with/without client) installs with the following two files in the <ORACLEXE_SERVER_HOME>/BIN directory:
Oracle.DataAccess.dll v10.2.0.100 (for .NET Framework 1.0)
OraOps10.dll v10.2.0.100 (for .NET Framework 1.0)
2) Applications built with VS2005, .NET Framework 2.0, and Oracle Developer Tools for Visual Studio .NET with Oracle10g Release 2 ODAC 10.2.0.2.20 use Oracle.DataAccess.dll v2.102.2.20 (for .NET Framework 2.0).
3) The client machine will be missing the following two files vital to the application: Oracle.DataAccess.dll v2.102.2.20 (for .NET Framework 2.0), OraOps10w.dll v2.102.2.20 (for .NET Framework 2.0). These two files can be found on the development machine in the <ORACLE_ODAC HOME>/odp.net/bin/2.x and <ORACLEODAC _HOME>/bin directories, respectively.
Action:
When installing the application on the client's machine, place copies of the two missing files into the client's <ORACLEXE_SERVER_HOME>/BIN directory, overwriting the existing Oracle.DataAccess.dll v10.2.0.100 (for .NET Framework 1.0).
Result:
The application performs as expected.
My immediate concern is that the client may object to replacing the existing Oracle.DataAccess.dll v10.2.0.100 (for .NET Framework 1.0). What are the best practices for such a situation?

Possible version conflict, sending purchase order to SUS in MM-SUS scenario

We are currently trying to get the MM-SUS scenario working. In this
scenario, we create a purchase order in the ERP/MM system. The
purchase order is then transferred into SUS via XI/PI.
After creating a purchase order in the MM system, the purchase order
reaches the SUS system, but then errors-out in the SUS system upon
posting. The specific error is paraphrased as follows:
No interface action for sender or receiver found (from Trace)
PARSE_APPLICATION_DATA
CX_ST_MATCH_ELEMENT
System expected the element http://sap.com/xi/SAPGlobal20/Global;
PurchaseOrderRequest
We suspect a version conflict. The SUS version is 7.01. The XI/PI
system is version 7.11.
Can you confirm or rule-out a version conflict?
The Integration Builder scenario we are using is Plan
Driven Procurement with Supplier Enablement.
We have tryed many variations in Integration Builder, but all
produce errors in SUS. The test tool in Integration Builder also shows errors
for certain message types. The message type ORDERS.ORDERS02
needed to be added manually, and did not come along with the scenario.
Edited by: Bill Guderian on Mar 19, 2010 4:53 PM

Any clue from here.
Note 936003 - ERS Invoice causes conversion error within SRM
When the SRM system attempts to process an ERS Invoice sent from the MM backend, a PARSE_APPLICATION_DATA CX_ST_DESERIALIZATION_ERROR fault is thrown.
Other terms
CX_ST_DESERIALIZATION_ERROR PARSE_APPLICATION_DATA SUS SRM EBP ERS Invoice XI Exchange Infrastructure Mapping
Reason and Prerequisites
This error will occur when the IDOC does not have a VPREI value; it is the result of an error within the divide logic of the XI mapping operation. This operation is performed within the XI system. A calculation of NETWR/MENGE is performed; however, the result is not properly formatted. As such, 72.30/10 produces a result of 7.2300002. This value is too long for the inbound SRM proxy and hence the error is thrown.
Solution
The solution to this problem is to add a FORMATNUM function within the XI mapping operation. This restricts the result to 2 decimal places, which adheres to the definition of the inbound proxy.
Step by step directions on how one implements the FORMATNUM function are as follows:
1. Log into the XI system with SAPGUI
2. Start the Integration Builder:Design tool (for steps on how to do this, review the steps below):
    a. Run transaction sxmb_ifr
    b. This will cause a browser to come up. Select the Integration Repository link
3. In the left pane, select the Objects tab
4. Navigate to the SAP SRM SERVER ' SAP SRM SERVER 5.0 ' http://sap.com/xi/SRM/SupplierEnablement/Global --> Mapping Objects --> Message Mappings folder
5. Double-click on MM2SUSInvoice
6. The right pane will display the mapping object
7. Select Edit mode
8. In the box that contains the output (Message Type: InvoiceRequest), navigate to InvoiceRequest ' Invoice ' Item ' Price ' NetUnitPrice
9. Double-click on the Amount element and you should see the mapping, represented graphically in the bottom pane
10. In the status line of the graphical editor, select Arithmetic from the list box:
11. To the right of the listbox, scroll until you see the FormatNum function
12. Click on FormatNum, which will cause the function to be added to the graphical editor. You may drag the box as desired
13. Select the connection that binds the if/then/else to the Amount box by grabbing the arrow within the input of the Amount
14. Release the drag of the connection while over the input to the FormatNum box. This will reassign the output of the if/then/else to the input of FormatNum
15. Create a connection between the output of the FormatNum box and the input of the Amount box. You accomplish this by clicking within the output and releasing within the input (respectively).
16. Save the modified mapping object
17. Activate the changes
    a. In the left pane, select the Change Lists tab
    b. Navigate to the Standard Change List entry
    c. Right-click the Standard Change List entry and select Activate
    d. Select only MM2SUSInvoice if more than one item is available, and press the Activate button
18. This will complete the required modification.

File Transport: Version conflict.

Hi,
I have a doubt on a particular scenario while transporting object from QA to PRD using File transport.
I have exported a tpz file say 1.tpz from QA with say the following objects
Obj_1(ver 1.0)
Obj_2(ver 1.0)
Obj_3(ver 1.0)
Now before this 1.tpz is imported in PRD few more changes happend to Obj_3 and I exported again a file say 2.tpz
Now this 2.tpz has only Obj_3(ver 2.0)
Now the basis has by mistake Imported this 2.tpz file before importing the 1.tpz file. SO in my PRD the object Obj_3 is existing with a advance version i.e 2.0
Now my doubt is can we Import 1.tpz now in PRD and then again import 2.tpz ?
I am having a feeling that we will definately get in version conflict. Even if I ignore the warning during transport and go ahead with this procedure of importing 1.tpz and then 2.tpz again, will it impact my scenarios.
I am lookign for a quick suggestions.
Regards,
Rahul.

Hi Rahul,
If you import V1 file first & later V2, it will not impact on your scenarion & you wil be able to see latest object in PRD.
But V2 is already imported so import of V1 may not be successful.
You may generate a new export if possible & transport this. It should include all object with their lastest version.
Regards
Sushil

Bulk Replacements using Replace function in oracle 8i

Hi All,
Iam using oracle 8i version and i need to use Replace function for bulf replacements i mean i need to replace around 250 rows. So please anyone suggest me how to proceed
on this request as iam using oracle 8i version.
Thanks!
Srini

Write one update statement.
The where condition is the filter what rows need to be touched.
The SET condition will do the data change. For example it could use the REPLACE function if that is what it is needed.
One single update statement over 20 rows would mean the task is done in BULK. 20 single updates that each handle one row would mean it is row by row = slow by slow processing.

I recently installed the trial version of Adobe XI and the trial period ended, so I wanted to revert back to the version I already had. I did not see any uninstall feature and my old version was apparently replaced by the trial version. I cannot re-instal

I recently installed the trial version of Adobe XI and the trial period ended, so I wanted to revert back to the version I already had. I did not see any uninstall feature and my old version was apparently replaced by the trial version. I cannot re-install a previous version b/c I need both a product Id (GOd only knows where that is now) and a way to uninstall the trial. Any ideas?

When you installed the trial, there should have been an option to have ignored your current installation and leave it. Apparently you skipped that case. To uninstall the trial (in Windows) go to Control Panel>Programs & Features and select the Acrobat XI and choose uninstall. After the uninstall run http://labs.adobe.com/downloads/acrobatcleaner.html to clean up your system. HOWEVER, if you see your old Acrobat in that window, do not run the cleaner, but do a repair on the old version.
You did not mention the old version you had. You might try from http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html. As for the S/N, you should have register and if so you can get it from Adobe. The instructions are at http://helpx.adobe.com/x-productkb/global/find-serial-number.html#adobeproductdownload.
Be sure to backup any download of the old installer and the S/N to CD or backup HD for future use. They will not likely continue to be available.

Version conflict while targeting a vi to RT engine

When i am targeting a vi to Labview RT engine the message "Version Conflicts between Host Labview and RT engines" is coming.
I am using a CFP-2100 and want to run a vi on it. (No PC should be connected with it)
After targetting how will i execute it on CFP? is it automatically executable?
Please reply me
--Alok Trivedi
Pune
-AL☼K

Thanx for replying me so soon.
I am still stucked with the problem.
I have Labview 7.0 installed on my computer and where i am making a vi which is to b loaded into CFP - 2100.
Here are other versions i am using.....
Field point VI manager 3.1.0
Field point Drivers 5.1.0
Data socket for Labview Real Time 4.2
Labview Real Time 7.1
NI-Irda RT 1.0.1
NI-Serial RT 2.5.4
NI-VISA 3.2
NI-Watchdog 2.1.2
When i switch the execution target to RT engine for remote device and enter the machine IP address it shows me "Version Conflict while targeting a VI to RT engine".
I talked to Rahul about this and he well told me how to repair version conflicts between Host machine and RT engine. I went to remote machine and by right clicking on "software" installed all the versions to remote machine according to the host machine.
the interesting thing is here it's not showing any version mismatch all the versions shown above are same as the host machine......but whenever i try to target the execution to RT engine it shows the version conflict.
now what all questionis running in my mind are :
1. Why the version conflict is occuring?
2. If I get succeed to targeting the execution of vi onto RT engine how would i install it to CFP, if i just copy and paste it via FTP how will it know what vi is to run? i think we'r missing some way to "install" the vi into CFP.
3 What is "RT Communication wizard for".......why it makes 3 other vi's....
4. what are the total ways to run a vi onto CFP
Waiting for your reply...
thanks again
-Alok Trivedi
Pune
-AL☼K

Version conflict resolution failure - catch 22

Hi,
I have a situation where I am trying to delete a DIRECTORY object (a receiver determination for example), but when I attempt to activate the change list a version conflict is reported.
When I attempt to resolve the conflict through the editor, I always get a 'MERGE RELATION IS NULL' error and cannot resolve the conflict and therefore cannot delete the object.
I am using SP 13.
Any help will make me VERY happy !
Cheers,
Guy

Hi,
Use TCODE : SXMB_IFR then Exhange Infrastructure Browser Will Display then
GoTo--> Administration by using PISUPER or XISUPER ->select ID->Select Administration of Locks and Caches -> Select Lock Overview>Delete if ur userid is display.
Then Refresh Cache once.
Plz allot points if u satisfy with the answar....
With Regards,
Mahesh

Acrobat versions conflicts, GetObject of a specific Acrobat version with dotnet

Hello,
I am developing a Windows/VB.Net application that uses "Adobe Acrobat 7.0 Type Library" to interact with Acrobat.
At a certain point this application must launch Acrobat 7.0 and to do that I use a GetObject(, "acroexch.app") and a CreateObject("acroexch.avdoc") to instanciate an Acrobat.CAcroApp and an Acrobat.CAcroAVDoc object:
Dim acroApp As Acrobat.CAcroApp = GetObject(, "acroexch.app")
Dim acroAvDoc As Acrobat.CAcroAVDoc = CreateObject("acroexch.avdoc")
If acroAvDoc.Open(path, filename) Then
acroApp.Show()
Else
acroApp.Exit()
End If
This works fine except when Acrobat 5.0 is also installed on the PC.
Because if the user has admin rights and launches Acrobat 5.0 then the next time he/she tries my application it raises an exception on "acroAvDoc.Open(path, filename)". I know that this problem comes from Acrobat 5.0 because when the user launches Acrobat 7.0 and executes the "Detect and Repair" menu item (under "?" menu) then my application works fine again.
So my questions are:
1°) is it possible to specify the Acrobat version when using CreateObject and GetObject? As with a kind of GetObject(, "acroexch.app.acrobat7")?
2°) is it possible to avoid the registry modification made when Acrobat 5.0 is executed with admin rights?
3°) if none of the previous points are possible then is there any other way around this problem? (such as executing Acrobat 7.0 with Shell(acrobat7ExePath) and then retrieving the Acrobat.CAcroApp from the ProcessID?)
Any hint will be helpful.

Aandi, thank you for your reply. If Acrobat 5 has been launched at least once after installing Acrobat 7 then it modifies the registry in such a manner that even if you restart the computer and execute Acrobat 7 all ProgIDs from the SDK refer to Acrobat 5 (and then my application crashes). So you are right, using GetObject and CreateObject with the PRogIDs "acroexch.app" and "acroexch.avdoc" will not lead anywhere with conflicting versions of Acrobat.
About executing Acrobat 7 with the "Shell()" command, is it possible to instanciate the Acrobat.CAcroApp object only by knowing the ProcessID?
Such as (with acroPath being the path to Acrobat 7.0 exe file):
Dim processID as integer = Shell(acroPath, AppWinStyle.MinimizedNoFocus)
Dim proc As Process = Process.GetProcessById(processID)
Dim acroApp As Acrobat.CAcroApp = SuperUnknownFunction(proc)
To John T Smith: sorry if I did a mistake when I chose "Acrobat Windows" forum for my post. As this problem was tightly related to Windows registry I thought that it was the right place. Is it possible to move this discussion on another forum?

Target fieldpoint connection failed due to version conflicts

I have set up a small network of fieldpoint (fp-2015) and laptop with Ethernet. Then, I have succesfully configured this fp with MAX and downloaded the iak file to it. Now, I want to target the labview RT of this fp. However, the the connection failed with following message "Version Conflicts between host labview and RT Engine". I'm using Labview 7.1 released in August.

It sounds like the FP-2015 that you have has an older version of software on it (probably LabVIEW 7.0). To upgrade the software on the FP-2015, first launch Measurement & Automation Explorer. Locate the FP-2015 under Remote Systems. Right click on the software item and select Install Software. This will allow you to install the new software image and upgrade the controller to LabVIEW 7.1. Note: You will need FieldPoint Explorer 4.1 which shipped with LabVIEW 7.1. If you have an older version of FieldPoint Explorer, it will not have the 7.1 image for the FieldPoint controller.
Regards,
Aaron

SDM version conflict error

Hi guys,
I'm trying to apply a note on a portal with MSSQL on a Windows system using SDM.
When I run SDM from
usr\sap\<sid>\<instance>\SDM\program\RemoteGui.bat
and enter the password(which I know is correct) I get this error
Request for Logon rejected because the version conflict- Server version 1.70, Gui version 1.60
How can I upgrade the version of Gui?
J2ee engine has SP7 on 7.0
I would really appreciate it if anyone can help me here
Thank you

Have you upgraded the database or OIM to 9.1.0.2.
You can ignore this as per Oracle guys told me.

DAQmx version conflict preventing deployment

Hi all,
After installing LV2010 on both my dev machine and my RT target (rt desktop running Pharlap), I am unable to deploy DAQmx tasks to the target. The error message suggests that the deployment problem is related to a daqmx version conflict between the two systems, but looking at the software lists in Measurement and Automation Explorer (v4.7) both show components for DAQmx 9.5.1. I've reinstalled the daqmx components on both systems and have not gotten any different behavior. Anyone else having this problem or know of anything else to try?
Thanks,
tHa
CLAD

In grasping at straws I also noticed that the entries visible under the Software tree in MAX Explorer do not match those that appear in the dialog box when I select "Add/Remove" software. Maybe my system is using the wrong version of daqmx when it tries to deploy?
I've also been able to successfully run the tasks from the Explorer window.
CLAD

Version conflicts and similarities..

is it that supposing i have a version of Dev2000 Ver6 then i
have to have the same version of Designer2000 ie Ver6 only?
or else there will be a version conflict or probably the product
might not install??
I have Oracle 8i Personal Edition.
Dev2000 Ver 6
Des2000 Ver 2.1
but Des2000 fails to install in the ORACLE_HOME directory after
Dev2000 is installed.

You are a very astute person, jdhore! Thank you very much!
q ~ $ pacman -Syu
:: Synchronizing package databases...
testing is up to date
core is up to date
extra is up to date
community is up to date
unstable is up to date
archlinuxfr is up to date
gianvito is up to date
archlinux.pl is up to date
lnf is up to date
tango is up to date
:: Starting full system upgrade...
:: Replace bluez-libs with testing/bluez? [Y/n] n
:: Replace gtk-engines with gianvito/gtk-engines-svn? [Y/n] n
resolving dependencies...
looking for inter-conflicts...
Targets (4): ncurses-5.6-8 ntfs-3g-1.2812-1 qt-4.4.1-3 xine-lib-1.1.15-2
Total Download Size: 23.46 MB
Total Installed Size: 76.40 MB

Need help in using replace function with special characters

I have a column in a table where the data can contain ascii code for special characters such as an apostrophe.
The data looks like this:
CREEK'S LANE
ie for a street named CREEK'S LANE.
I want to replace the ascii representation with the apostrophe and have the returned data show up as: CREEK's LANE
When I try the query below I get prompted for substitution variable value.
I don't seem to be able to find the right syntax to make this query work.
SELECT REPLACE (street_name, ''', '''')
FROM
streets WHERE street_id = 1
Does anybody know how to do this?
Any help would be much appreciated.
Thanks.
George

george91 wrote:
I have a column in a table where the data can contain ascii code for special characters such as an apostrophe.
The data looks like this:
CREEK'S LANE
ie for a street named CREEK'S LANE.
I want to replace the ascii representation with the apostrophe and have the returned data show up as: CREEK's LANE
When I try the query below I get prompted for substitution variable value.
I don't seem to be able to find the right syntax to make this query work.
SELECT REPLACE (street_name, ''', '''')
FROM
streets WHERE street_id = 1
Does anybody know how to do this?
Any help would be much appreciated.
Thanks.
GeorgeHa! The codes you specified rendered in the HTML, but showed properly when I listed your original posting above. I didn't understand what you meant initially because the 5-character string represenation got rendered as the quote that you said you weren't able to get - a display problem.
You're getting prompted for the substituon variable because of the ampersand; you appear to be doing this in SQL*PLUS. The first thing I would try is to SET DEFINE OFF when using the ampersands to see if that works. If That doesn't work check the docs to delmit the ampersand (I think its a backslash before it but can't remember offhand). Another, harder option might be to use the TRANSLATE function replacing the literal character instead of using REPLACE (though replacing a quote will be a little tricky). If you're on 10g also consider using the advanced quoting
Good luck!
Edited by: riedelme on May 22, 2009 12:45 PM

Formula variable using Replacement path not working

Dear All,
I am using a query to calculate YTD values in the report. I am using a formula variable to calculate the number of months. Formula is
Month To - Month From+1
When I am giving the range from 001 to 006 for period in th evariable screen,
I am gettung Month To as 6 and Month From as 6 with total no . of months as 1.
I think Month From is not being caculated properly. I created another formul variable using Replacement path, for characteristic Posting period, replace with a Key and dimension ID as number with out any offset.
Still not working.
Any suggestions.
Thanks and Regards,
Srini
Edited by: Srinivas on Apr 24, 2008 11:13 AM

Hello,
I have seen this document already. It is slightly different from what I am trying to do here than what the post shows. How ever, I did everything right, atleast seems to be and don´t know why I am not getting the From value from the posting period selected. To value variable is coming right.
Any more sugegstions.?
Thanks and Regards,
Srini

Version conflict using "replaces"

Similar Messages

Maybe you are looking for