Version conflicts between host labview and RT engine

there is problem that i cannt switch target to feild point. It said that "version conflicts between host labview and RT engine" . But my labview is version 7.0 and the real time module is version 7.0 too. Anyone can give me hand? Thanks

Depending on your version of MAX, you should be able to change the version on the FP (in remote systems). If you can't do it in 3.0, try upgrading to 3.1 (you will have to search for it on the site). If that doesn't work, you can try resetting to factory default and then see if you can do this.
Another tip, which for some reason seems to help, is updating the OS\Run-Time Engine when windows is in safe mode.
Try these and see if they help.
BTW, as a tip for next time, you're more likely to get a good answer for something like this if you post in the FieldPoint board.
Try to take over the world!

Similar Messages

  • How do I correct version conflicts between host and RT engine?

    I was running LabVIEW RT7.0 on a host PC (WinXP) and PXI-8145 system. I installed LV7.1 and LVRT7.1 on the host. However, the software versions in MAX still report as 7.0
    I would like to upgrade to 7.1 on my 8145-RT. I cannot run 7.1 on the host and target the 7.0 RT engine (results in version conflict). Version 7.0 is installed on C:, but 7.1 is installed on D: due to space.
    How can I get MAX to recognize my latest version (which should allow my to download it to the PXI)?
    Thanks.
    Laine

    Thank you for the response.
    C:\RT Images contains only a single folder for NI-PAL
    However, I backed it up and copied the RT Images folder from D:, but still the same effect (MAX thinks 7.0 is the latest LabVIEW version).
    D:\RT Images\LabVIEW\7.0 contains subfolders and install scripts (e.g., 7002.rts)
    D:\RT Images\LabVIEW\7.1 contains subfolders but no install scripts. Also, there are many fewer files in these subfolders than in the 7.0 folder. I'm worried about trying to manually install from the 7.1 folder.
    Any other suggestions? Thanks.
    Laine

  • How can i troubleshoot a "software conflict between a device and something in my original user account"

    hi
    my canon video camera (HV20) wasnt being recognised by iMovie (error message...in system report was "Unable to list FireWire devices".)
    in researching a solution i came across some firewire advice in http://support.apple.com/kb/HT1151#trouble which suggests there may be a "software conflict between the device and something in your original user account."
    i changed to another account on my iMac and my camera connected immediately.
    is anybody able to explain how i go about fixing this "software conflict".
    many thanks
    Carlo

    With the Mail.app quit and using the Finder, go to Home > Library > Mail > Mailboxes > Outbox.mbox.
    The Outbox.mbox represents "Out" in the mailboxes drawer and is shared by all accounts.
    Delete the Outbox.mbox and empty the Trash.
    Launch Mail and a new Outbox.mbox will be created automatically by Mail within the Mailboxes folder and this should resolve the problem.

  • Conflict Between Bluetooth Mouse and WIFI?

    I Bought the new MBPR X72 and a Iogitech Bluetooth Mouse.When i download something by Wifi,My mouse can't work well.I search the answer on Google,some people said that there is a conflict between Bluetooth mouse and Wifi.Because they are both use the 2.4G HZ.So anyone can help me ??

    If you are on your home network, you could set the router and MBPr to use only the 5 GHz band if you are using the n-protocol WiFi.  That would mean logging intothe router and changing band usage settings.  The MBPr would follow what it sees as the wireless signal.

  • Version conflict between XE's ODP and VS2005/ODT's ODP

    Suppose you've just built an application with VS2005, .NET Framework 2.0, and Oracle Developer Tools for Visual Studio .NET with Oracle10g Release 2 ODAC 10.2.0.2.20 which uses Oracle.DataAccess.dll version 2.102.2.20. You want to be able to run the application on a client machine that has an Oracle XE database installed locally. Perhaps you even require that the client machine runs the Oracle XE Client. Unfortunately, even with both there seems to be a version conflict regarding Oracle.DataAccess.dll. Can anyone say what are the best practices for such a situation?

    Situation:
    1) Oracle XE (database with/without client) installs with the following two files in the <ORACLEXE_SERVER_HOME>/BIN directory:
    Oracle.DataAccess.dll v10.2.0.100 (for .NET Framework 1.0)
    OraOps10.dll v10.2.0.100 (for .NET Framework 1.0)
    2) Applications built with VS2005, .NET Framework 2.0, and Oracle Developer Tools for Visual Studio .NET with Oracle10g Release 2 ODAC 10.2.0.2.20 use Oracle.DataAccess.dll v2.102.2.20 (for .NET Framework 2.0).
    3) The client machine will be missing the following two files vital to the application: Oracle.DataAccess.dll v2.102.2.20 (for .NET Framework 2.0), OraOps10w.dll v2.102.2.20 (for .NET Framework 2.0). These two files can be found on the development machine in the <ORACLE_ODAC HOME>/odp.net/bin/2.x  and <ORACLEODAC _HOME>/bin directories, respectively.
    Action:
    When installing the application on the client's machine, place copies of the two missing files into the client's <ORACLEXE_SERVER_HOME>/BIN directory, overwriting the existing Oracle.DataAccess.dll v10.2.0.100 (for .NET Framework 1.0).
    Result:
    The application performs as expected.
    My immediate concern is that the client may object to replacing the existing Oracle.DataAccess.dll v10.2.0.100 (for .NET Framework 1.0). What are the best practices for such a situation?

  • Conflict between Logic Pro and external device error in Logic Pro X./cpu problems

    hi Logic users,
    using a MacBookPro 15 inch Retina, 2,7 GHz intel Core i7, 16 GB Ram, OSX 10,8,5, Logic X 10.0.4.
    i am wondering if you can help me out with the following problem i cant solve:
    when starting logic x with a not too big arrangement, lets say using one third to half of cpu, i open u-he plugin Diva and the cpu is going up on full range and the following error appears: "sample-rate 39299 (number always changes) reconized. Check conflict between logic pro x and external device"
    as external device im running a VirusTi and as audio-device Apogge Duet. when dis-connecting both devices, i have the same problem.
    putting the sample buffer up to the highest rate, doesnt change anything.
    same arrangements on friends computers dont show that problem, so it has to be something wrong in my set up.
    anybody has an idea?
    would be much appreciated for your help,
    thanx-

    Have you used Diva's preset Accuracy system to reduce CPU load?
    accuracy
    Click on the Main button at the bottom of the window. To the right of the Master section are two selectors called Accuracy and OfflineAcc. In the current version of Diva these are global parameters i.e. they remain fixed across all presets, per loaded instance:
    draft........CPU-friendly, but FM will sound rough and resonance is primitive i.e. NOT zero delay! fast......... Fine for older computers and/or when you need more polyphony in acceptable quality great...... The best compromise between quality and polyphony on high-power computers divine..... Top-quality zero delay feedback filters... but can your computer can handle it?
    OfflineAcc only has two options – same or best (i.e. divine in the current version).
    Some host applications may have problems rendering to audio at the selected accuracy, but the
    better ones include an “inform plug-ins of offline rendering status” or similar.
    I typically work in draft mode and then switch to Devine or best when freezing the track or bouncing the entire project...

  • Having a conflict between Firefox 4 and Endnote

    After installing Firefox 4, when I tried to open Endnote (and yes I closed the program before installing Firefox 4) I got a message that Endnote was unable to open my library, check to see if anyone else is using it; if the problem persists use the recover library in Endnote. Well, I tried the recover library and it did not work. I did get my library back by moving the library to my desktop, I think all by references are there, however, I lost all my Groups, and the file attachments are all messed up.

    I encounter immediate problems on installing Firefox 5. There were 3 Windows 7 crashes and I could not access Firefox. It was determined that there was a conflict between the anti virus program and the 5 version. There is no download for the older version 4 was not available. After trying several fixes, nothing worked.
    One post indicated that Mozilla was not fixing Firefox 5 and that the fixes were made in Firefox 6 version. Reluctantly, I upgraded to six and , to my amazement, it works again. Nothing ventured, nothing gained!! Hope it works for you.

  • Conflict between iTunes Match and Windows 8.1

    I have been running iTunes on my fully updated Windows 8.1 PC for some time, without any particular issues. A few days ago, I activated iTunes match. It worked just fine, in the perspective of my iPhone and iPad. However, my PC stopped being responsive: Long time-outs on just about anything, and dialog windows refusing to appear (one of them being the McAfee console ....). A virus search using Microsoft's emergency services showed nothing.
    The moment I de-activated iTunes match, everyhing reverted to normal.
    My conclusion is, there is a major conflict between whatever the iTunes match service does, and the Windows 8.1 operating system.
    Any idea what this is all about, and if there is anything I can do about it (except avoiding using the match functionality)?
    I have the latest update of iTunes for PC.

    Hi lars1950,
    Welcome to Apple Support Communities.
    It sounds like you're seeing issues with Windows responding slowly since enabling iTunes Match. The article below may resolve the issue for you, it describes possible conflicts with Layered Service Providers and how to prevent them.
    Apple software on Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123
    I hope this helps.
    -Jason

  • File transfer problem between Host OS and Guest OS

    Hi,
    I have WIndows7 32 bit as a host OS in C drive. and i have installed the Virtualbox in D drive and installed CentOS 6 in virtual box as a guest OS.
    After installing the Guest Additions in CentOS and set the Drg n Drop-Bidirectional. it permits to create shared folder in CentOS but i am not able to drag n drop to any file from host to guest and vice versa.
    Also when i plug the pendrive it copy the partially data in guest OS then it show unpluggeed automatically in guest OS. It copy only .rpm file in guest OS (CentOS)
    please suggest how to copy the file from Host OS to guest OS and vice versa.
    I have installed VirtualBox-4.3.20-96997. i have installed also Oracle_VM_VirtualBox_Extension_Pack-4.3.20-96996.vbox-extpack on windows ( on host OS).
    Thanks.

    The following is from the virtualbox user manual:
    Drag’n’Drop This setting allows to enable Drag and Drop: Select a file on the desktop, click the left mouse button, move the mouse to the VM window and release the mouse button. The file is copied from the host to the guest. This feature is currently only implemented for Linux guests and only for copying files from the host to the guest.
    I guess that explains your experience with Drag'n Drop.
    Regarding USB and the pen drive, you cannot access a USB device in the host and guest OS at the same time. The technology does not support this. You will either have to capture the device to be used/mounted in the host or guest OS. Unless you configure the USB device in the virtual machine settings, the device will normally be captured by the host OS and become inaccessible by the guest OS.
    To copy files between Windows and a VirtualBox Linux guest you can use Putty and it's pscp.exe to copy files from Windows to Linux and vise versa. You may have o enable SSH on your Linux side. There was a post here yesterday, please check the last forum discussions. Alternatively you can also use WinSCP if you want a GUI tool.

  • Why is there a one-inch gap between FF logo and search engines?(I'm using FF4).

    I recently downloaded FF 4.I'm not technically savvy,and was a bit confused to see a drop down menu and the word "Firefox".
    I didn't like the new set-up and managed to delete it, in favor of the logo.
    Now,the opening page is in the background and there is a one-inch gap between the logo and the search engine.Is there a way to have a space reduction?
    F11 is NOT a resolution.

    You can make FF4 look like FF3 by doing the following.<br><br>
    * Right click a blank part of the tab bar and click "Tabs on top" to remove the checkmark. Tabs will subsequently reappear below the search bar.<br><br>
    * Repeat the same steps, but click the top one called "Menu bar". This will reinstate the text links at the top.<br><br>
    * To rearrange the layout, repeat the same steps again and choose "Customize". A panel will open and while that remains onscreen, you can move elements like toolbars, buttons etc around and place them anywhere you wish. You can also drag anything you don't like into that panel and add anything you want by dragging it out of there.<br><br>
    * To replace the status bar at the foot of the page, install this add-on: https://addons.mozilla.org/en-US/firefox/addon/status-4-evar/<br><br>

  • Is there a conflict between Reader XI and Acrobat being used on the same computer?

    I downloaded the new Abode Reader XI. The computer in question has, also, Adobe Acrobat 7. Is there a conflict between them if used on the same computer? I can not open any PDFs and now the saved PDFs I had on the computer will not open and the icon shown on the desktop is gone. Please advise as I scan documents to this computer all the time and the person who needs to see them can not.

    I have Acrobat 8.1.6 and Reader XI on Win XP. Do these conflict? Should I get rid of the newer Reader?
    I'm having problems printing to the PDF print driver, locks up system, shows printer offline in spooler. I doubt problem is with driver itself because I can print a Test Page from it ok. But printing to Adobe PDF from Word & other apps locks up & never completes.
    There's an Exclamation Point next to Acrotray in Explorer. (see image)  What does this mean??
    Have tried Repair install of Acrobat twice.

  • Conflict between python-pyqt4 and python-pyqt5

    Hi!
    When trying to use matplotlib in the Spyder Python IDE I get the following error
    RuntimeError: the PyQt5.QtCore and PyQt4.QtCore modules both wrap the QObject class
    It's obviously a conflict between pyqt4 and pyqt5. However, pyqt4 is a hard dependency of Spyder and pyqt5 is a hard dependency of matplotlib. Outside Spyder, matplotlib works fine.
    Does anybody know how to resolve this conflict? Or is it a packaging issue? Shall I file a bug report? I think a discussion about matplotlib depending on Qt5 had already been going on here.

    Does it work with https://aur.archlinux.org/packages/pyth … tlib-noqt/ ?
    I think it's OK to open a bug report.

  • Are there any known conflicts between Mountain Lion and Microsoft Outlook for Mac? After installing, I can't send or receive eMails

    Are there any known conflicts between Mountain Lion (10.8.3) and Microsoft Outlook for Mac? After installing, I can't send or receive eMails. Using a Macbook Pro.

    Is this a recent problem or has it been going on for some time.  If you just updated to ML, you might want to confirm that you've update to the latest MS Office / Outlook patches.

  • Version mismatch between unified rendering and themes in Mime repository.

    We are planning to modify the SAP_tradeshowplus theme to include our company logo etc. As a start point we try to download the latest themes using wd_themes program. On execution of the program following message is displayed.
    The current version of unified rendering 7.11.3.2.0. All themes in the MIME repository should have this version This is not the
    case present. Perform an upgrade. More so sap_tradeshowplus is not listed .
    Our system version is mySAP ERP 6.0 + EHP4 + NW 7.01 - SP4 with all the latest notes applied as of 14th Aug 2009. Please advise how we can upgrade the themes to match the unified rendering version.
    Regards
    Rohit Chowdhary

    Hi Thomas,
    Thanks for the quick reply. I have gone through the note 1164679 and our intention was never to modify the sap_tradeshow_plus theme. I was just highlighting the point that sap_tradeshow_plus theme is not in the list produced by wd_themes.
    Any help or ideas how we can bring the version of unified rendering and themes to the same level. We have a scheduled UAT for one of our major products starting last week of August and the last thing I want to have is the system crash / or dumps because version mismatch between UR and Themes.  Please note until so far we haven't had any such issues during our Unit test.
    Regards
    Rohit Chowdhary

  • Set Forwarder mail between hosting company and MS online exchange

    Hello,
    This is Dharam from Ahmedabad, I can be contacted on 9638208855 ([email protected]).
    I wants to use ms online exchange for some of users in my company. I have 10 users having mail ids with hosting company and 2 users are having exchange plan with other company by forwarding mails to particular link on 123together.com
    Yesterday, i have signup for free 365 account for 1 month, as i am expected to buy only mail exchange plan for 5 users but after getting my requirements.
    I have set the forwarder to mail id i am able to receive through the [email protected] on all application of mail such as on desktop, mobile, owa etc... but while i am replying to those users its using id [email protected]
    which can be used by [email protected] which my domain and forwarded to online exchange services.
    As my boss is having exchange plan with 123together.com i have observed that they are using forwarder and same thing but receiving and sending mail from [email protected] on all the application of mail, they didn't even asked for domain setup.
    So i want to clear some my confusion before to proceed for the paid services, that can i able to serve this service for some users and some can be able to use the existing one without exchange on the hosting company by forwarding some users to online exchange.
    I hope to hear more from you.
    Dharam Kappadiya.
    9638208855

    Hi Matthew,
    Thanks for the reply,
    My concern is i don't want to transfer my whole domain to MS Online Exchange just wants to create Account and wants to set forwarder to my [email protected] from MS to etc... and from hosting company i have to set forwarder for [email protected]
    to usera@.... whatever the id has been created.
    So is it possible to do this because while setting up an account users its asking for DNS MX Record and TXT, which is for the whole domain users and i don't wants to do than.
    So Please guide me before i can go somewhere else.

Maybe you are looking for

  • How to add Terms and Conditions in Standard PO XSL-FO template

    Hi all, I want to add terms and conditions in PO_STANDARD_XSLFO template.... anyone has idea how to do it... In the template one place is given to add Terms and Conditions, but i am not able to use it..... Regards Ravi

  • MBP Audio over Mini-Displayport

    Hello How do I tell if my MBP can support audio over mini-displayport? I have purchased a mini-displayport to HDMI adapter but when I connect it to my TV I don't have the option in audio to choose the output over mini-displayport. I don't know if it

  • Need code for FM REUSE_ALV_POPUP_TO_DISPLAY

    If anyone can find the source code for FM REUSE_ALV_POPUP_TO_DISPLAY pls post it....also the code for the pgm which calls that ... Thanks for help.

  • Can an iPad generate an electrostatic discharge?

    G'day, I am doing some work for a client where the environment is potentially hazardous. In doing process audits, one of the most efficient ways is to use an iPad and mark up the appropriate process system PDF file, however the question has been rais

  • HT201269 How do I transfer content from my old iPhone

    How do I transfer content from my old iPhone to new iPhone when using someone elses computer?