Version conversion 5.1 to 12

Can anyone please up convert these 5.1 files up to 12.0 or at least up to 11.0 version? Thanks in advance
Attachments:
attachments.zip ‏711 KB

Here is the Version Conversion Board:http://forums.ni.com/t5/Version-Conversion/bd-p/VersionConversion. Repost your code there.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Similar Messages

Version conversion board

LabVIEW load error code 10:VI version (5.0.1) is too old to convert to the current LabVIEW version (10.0)
Could someone please convert the uploaded file to a newer version compatible with 10.0. Its very much urgent. Thanks in advance.
Attachments:
Keithley 196 vs DS345 with amp control.vi ‏135 KB
My GPIB Measurements -- Penetration Depth Experiment.vi ‏103 KB
HP34420A DC Configure & Read.vi ‏52 KB

altenbach wrote:
Bhramaji wrote:
first it need to opened in 7.1,then save it,the open with 8.5 the save it,you can open in 2010.
it is sequence followed for vi version in 7.1,may you have do it one more version older
Don't overcomplicate things, please!!!
All we need is open and save it in any version 6.0 ... 8.2, after which it can be opened in any newer version.
(Instead of giving random misinformation, you might just want to consult the version compatibility matrix instead. LabVIEW 8.2 can open anything 4.x or above, so it is a good version to keep around )
I have LabVIEW 8.2 installed specifically for these conversions. It was also the first version that was VISTA supported. Works well with Windows 7.
For those who care, the conversion was done here:http://forums.ni.com/t5/Version-Conversion/error-code-10/m-p/2609857#U2609857
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Version Conversion Board New Message

The Version Conversion board forces somebody to search for an exceptable solution before posting a new thread. That board should not do that as it encourages people to add on to previously solved threads. I didn't have to go through that in order to create this thread.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Solved!
Go to Solution.

RavensFan wrote:
I saw at the top of the Idea Exchange that the setting to force the search was turned on for new ideas. Maybe the setting got turned on for the Version Conversion board by mistake.
That appears to be what happened. I just mocked putting up a new idea and there was no search done before getting to type up my (non existant) idea.
But I was thinking about this while shaving this morning (I don't know why, random thoughts constantly bombard my mind). It would be nice for the Version Conversion board to have a different format for creating a new request. First of all, the button should be something like "New Conversion Request" instead of "New Message". But then that button should take you to a new page that has 2 drop downs (for LabVIEW Version From and LabVIEW Version To) and a place for attaching code. Put in notes that the file limit is 3 files and X MB and advise zipping up the code and posting the zip file. MAKE THE ATTACHED FILE REQUIRED. I guess there should probably be another field (optional) for general comments. So then this new page can autogenerate a topic name based on the two drop downs. We will get consistant topic names so we know exactly what needs done and it will be much easier for a new user of the board.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

New Version Conversion Board

Hello Forum users,
After recent feedback and conversations, we've decided it's time to dedicate a specific board for LabVIEW Version Conversion (replacing the existing Upconvert and Downconvert threads).
Please remember this is not a space for code discussion. This is just a space for you to post the VIs you need to be converted to an older or newer version of LabVIEW. If an issue arises where you need further assistance after the conversion has been completed (for instance, if you need the converted VI to be removed from the forums) please select "Report to a Moderator" and I will be happy help.
Enjoy the new, more organized Version Conversion board!
Jordan

RavensFan wrote:
I saw at the top of the Idea Exchange that the setting to force the search was turned on for new ideas. Maybe the setting got turned on for the Version Conversion board by mistake.
That appears to be what happened. I just mocked putting up a new idea and there was no search done before getting to type up my (non existant) idea.
But I was thinking about this while shaving this morning (I don't know why, random thoughts constantly bombard my mind). It would be nice for the Version Conversion board to have a different format for creating a new request. First of all, the button should be something like "New Conversion Request" instead of "New Message". But then that button should take you to a new page that has 2 drop downs (for LabVIEW Version From and LabVIEW Version To) and a place for attaching code. Put in notes that the file limit is 3 files and X MB and advise zipping up the code and posting the zip file. MAKE THE ATTACHED FILE REQUIRED. I guess there should probably be another field (optional) for general comments. So then this new page can autogenerate a topic name based on the two drop downs. We will get consistant topic names so we know exactly what needs done and it will be much easier for a new user of the board.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

.llb file Lower Version Conversion

Hi,
Looking for some guidelines to convert the .llb file into lower versions of LabVIEW. The thing is we have an instrument driver project created using LabVIEW 8.6, containing public and private folders and some .mnu files as well. I can save the whole project into the lower version, for say 8.0, using "Save for Previous Version" that again compiles and saves the whole project into another folder. The newly 8.0 project I opened and found that the private folders (containing .llb files) and .mnu file in public folders are still pointing to the older location i.e. 8.6 location. I removed the 8.6 code from its location and manually added private files to point to the 8.0 location. After I create installer for 8.0 codes using project file, I installed on new machine and found that private and .mnu files are missing and therefore could not proceed further. I can understand that .mnu files won't require any conversion but wondering why my 8.0 project are considering 8.6 location at all even after manually adding all the missing files back into the 8.0 code from 8.0 location.
Please do suggest me if anyone has any idea for the same. Looking Forward.
Thanks in Advance,
Vivek

Hi,
The problem seems to be with the way the project folders are saved. There are two types of folders viz Virtual and Autopopulating. By default when you create new instrument drivers project , Virtual folders are created. You need to convert them to Auto populating folder as shown in the figure below. Autopopulating folder refrences and updates as and when you make any changes to the actual file. Whereas A virtual folder is a folder in the project that organizes project items and does not represent files on disk.
Hope that solves your querry.
Shreyas Hebbare
Shreyas Technologies
India

BPC Netweaver version - Conversion File Formulas

BPC (Netweaver) Expert,
When creating formulas on the Data Conversion File that is called by the Transformation File, the Formulas are not working on the Netweaver Version. Does anyone have any idea what may not be set up correctly?
Thanks,
Greg Rotvold

Hello Greg,
BPC Netweaver uses somewhat different syntax for conversion formulas, and uses javascript for complex formulas, so formulas written using Visual Basic on the MS version will not work, though the basic *IF logic should work (I think I'm remembering MS conversion formulas correctly, but it's been a while). You can find the relevant Netweaver version documentation here: [http://help.sap.com/saphelp_bpc75_nw/helpdata/en/81/94a8a5febd40268d5c59b4fc31be37/frameset.htm]
If you want help specifically on the Netweaver version I suggest you ask your question in the Netweaver forum. I'm not sure what forum is most appropriate for questions about the differences between the two versions
Ethan

Without version conversion can you fully activate Evaluation verison of SO

I have download
an Evaluation version windows sever 2012 R2 from TechNet and install a server
with this. I also have activated it. <o:p></o:p>
Over the
time that server becomes an important part of an Application farm with SQL and
other bits and pieces installation. <o:p></o:p>
Now I find myself
in a corner as the Evaluation period is about to end. I am hesitating to convert
OS to full version as I am thinking that something may break and the
application farm will be un-stabilized. I know the way to convert OS version is
to use PowerShell as I have done it on a test server. <o:p></o:p>
1. During
the conversion process, what may go wrong? <o:p></o:p>
2. Is there
any way you can convert the OS with just licences Keys? <o:p></o:p>

"Is there any way you can convert the OS with just licences Keys? "
Yes. The only limitation is if you have installed the machine as a domain controller. That cannot be converted in place. It requires removing it as a DC, changing it to a fully licensed copy, and then making it a DC again.
http://technet.microsoft.com/en-us/library/jj574204.aspx
. : | : . : | : . tim

Version conversion

I need to convert my app from LabView version 7.1 to (compatability with) 6.0. I'm aware that 7.1 can save down to 7.0, but have yet to find a reliable means of getting down to 6.0. thanks in advance.

Each version can save to the immediately previous version (starting with 6 or 6.1, I think). So 7.1 can save to 7.0. 7.0 can save to 6.1 and 6.1 to 6.0. Thus you need all those intermediate versions. Of course if you used any features in a later version that did not exist in the earlier version, the save will not work.
Lynn

Windows 7 German version vs US English version conversion via MUI integration

I need a install media for German Windows 7, but I only have a copy of the English version. I have successfully integrated German into the WIM file image, and install setup prompts for German, after installation, for example, home premium, the only language
avaiable is german, but does this make it real german version that can be activated in Germany? (English is automatically removed by Task scheduler in Windows setup after installation) Can a product key from Germany activate this image I make?

I dont think it'll work for home prem. version.
Applies to
Windows 7 Service Pack 1
Windows 7 Ultimate
Windows 7 Enterprise
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

PDF version conversion throught IAC

Hi all,
i'm trying to write a vb script for lovering the version of a big number of pdf.
I need to assicure that the converted pdf will be compliant with iphone ibook application.
Its seems that with "acrobat 5.0" compability it's works.
I've tried to use "Save As -> Optimized PDF" apening with app.menuItemExecute , but it show the popup.
there is a way to do this without having any popup?
thank you in advance

thank you for your answer.
In _my_ case i've seen that downgrading the version of PDF to acrobat 5 i've a compliant PDF.
Please, can you explain how to do this with IAC? If it's not possible this way, can you explain how i can do in another way?
(i've a big number of PDF, so i need to not having any showing dialogs in the process)
thank you!

Iphone language version conversion.

My iphone 4 is a china version and although have changed the language but it keeps bringing chinese languange when browsing and some other apps. plz help what can i do.

Using an iPhone without a wireless service plan - Support - Apple

Version Conversion library 5.1.1 to LV 2011

Hello,
Can someone covert me attached files? I don't have the old version and I need open the libraries in the labview 2011.
Thank you in advance.
Solved!
Go to Solution.
Attachments:
VLabLib.llb ‏492 KB
VLabSample.llb ‏114 KB

Mass compiled in 8.2.1, which you can read with 2011.
I was missing a dll that is needed, but here you go.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
VLabLib.llb ‏381 KB
VLabSample.llb ‏65 KB

Version Conversion 5.0 to 2011

Would someone help me covert those VIs from 5.0 to 2011, please?
It's in
.LLB format
Attachments:
TUTORIAL.LLB ‏611 KB

See here
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Version conversion from v12 to v11

I need this vi file to be converted from v12 to v11.
how to do this?
Attachments:
1169.vi ‏31 KB

Here you go
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
1169.vi ‏19 KB

Version Conversion 2014 to 8.6

Hi,
Please help me convert these files from LV 2014 to 8.6
Thanks
Solved!
Go to Solution.
Attachments:
string2bmp.vi ‏17 KB
string2bmpHeader.vi ‏31 KB

Here you go.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Attachments:
86.zip ‏29 KB

Version conversion 5.1 to 12

Similar Messages

Maybe you are looking for