Version Cue and GoLive CS2

I am using Adobe GoLive CS2 for the website, www.saddlebrookesoftball.com. I am in the process of training another volunteer how to update PDFs that we post weekly. I would like him to have access to my computer using Version Cue via the internet. So far, we have been unsuccessful in determining how to do that. Does anyone have detailed information that would show us how to achieve that functionally.
Thank you.
Joe Lestingi
SaddleBrooke Softball
520-818-2175

I use version queue and can help you set that up. Please send me a private message and we can arrange a remote assistance session.
Thanks

Similar Messages

CS2 Version Cue: lost work space. (???)

Safari was crashing and error was wrong flash player plug in. SO...
I reinstalled flash player, then doing some things with the software apps and did a hard disk test, I did 'something' wrong. My computer crashed and when I restarted it, I had a totally different screen configuration. It was like starting from scratch. Lost a lot of stuff.
Safari browser bookmarks and bookmarks bar was gone, all folders in Mac Mail gone, even messages. It's like everything was wiped clean. I do have the information on my hard drive and trying to restore things, BUT... Now...
Safari crashes and gives me error message about needing Version Cue CS2 work space to run. I don't know what this means.
I must have thrown something out that had the work space with it? I was being so careful what unneeded excess stuff I tossed.
Went to Version Cue console.log this morning and this is what it says:
Mac OS X Version 10.4.11 (Build 8S165)
2013-11-16 11:01:10 -0800
Nov 16 11:01:11 Macintosh mDNSResponder: Adding browse domain local.
2013-11-16 11:01:11.797 SystemUIServer[86] lang is:en
2013-11-16 11:02:14 : VCStatus can not run without an installed Version Cue CS2 workspace.
2013-11-16 11:09:37.818 Adobe Installer[236]: DebugAssert: AdobeInstaller: removedLockFile == YES [:0]
2013-11-16 11:09:37.823 Adobe Installer[236] bootstrap
2013-11-16 11:10:03.006 Adobe Installer[236] copyApp status 0
2013-11-16 11:26:04 : VCStatus can not run without an installed Version Cue CS2 workspace.
I can't reinstall just Version Cue, but I can uninstall it.
From what I understand, and that's not much being I'm not computer literate, CS2 needs Version Cue? Even though I had it turned off? (me thinks)
Can I uninstall Version Cue and still use all my other software?
I've had CS3 on my bookshelf for years. Never installed it because I wasn't sure how without messing other things up. Not sure what I would need to back up, etc.
Does CS3 have Version Cue? Would uninstalling CS2 and installing CS3 fix things?
My Processor is PowerPC, not Intel.
I am so frustrated and don't know what to do. Can anyone help me out here as to what I can do to make Safari happy?
Thanks!
PJ

No bites yet. Okay.
Simply put...
Can the rest of CS2 and Safari run without Version Cue if I uninstall it? Yes or No.
Does CS3 have Version Cue? Yes or No.
If I uninstall CS2 and install CS3, will Safari be happy?
I'm getting myself into a mess here without help cause I'm frustrated. Really need some help.

InDesign Server and Version Cue

Does anyone know where I can find javascript examples on how to get the InDesign server to talk to Version Cue?
I need to access templates that are checked in to Version Cue, and I want to be able to check in generated PDFs
I found a couple of functions in the object model, but I keep getting errors from the Version Cue client inside the InDesign server.

Thank you Bturko in the future only migrate/copy/transfer your documents and settings. Adobe applications especially are not designed to be transferred from one computer to another. It is possible to recover however. I would recommend the following steps:
Run the uninstaller located in Applications/Utilities/Adobe Installers
Run the CC Cleaner Tool to ensure complete removal - Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.
If you need to download a fresh copy of the installation files they can be downloaded at Download CS3 products.
Run the installer and reinstall Creative Suite 3.

Online Review With Adobe Reader and Version Cue

I am trying to set up a review system, and I have been using Version Cue CS3 as the host.
I have had success in setting it all up, and it is all working except for one problem. Any users using Adobe Reader (Versions 7 or 8 ) cannot comment on the files even though I have enabled the PDFs for "Commenting and Editing for Adobe reader". You can comment on the Document if you open the file directly, but not using Version Cue Server, which is browser based. Is there a way to make PDFs able to be commented by Adobe Reader users?
I guess my request is that you enable commenting in Adobe Reader when working in a web based system.

Arwind, sounds like spam to me. If you have a solution to the question, please say so.
Philip, I have had success with Shared reviews initiated from Acrobat 8 Pro and reviewed with Reader 8. There is not much to the process, you only need a shared drive that all users can access. If you have some users that cannot access the drive, then a WebDAV server may be needed, but adds extra complications. I have not had much experience with Version Cue server for PDF reviewing, but am interested in hearing more from other users.
Also, Adobe's Video Workshop has insightful training videos on Version Cue and Acrobat reviewing.
http://www.adobe.com/designcenter/video_workshop/

Integration missing between Bridge and Version Cue CS4?

Hi there,
I've installed Design Standard CS4, set-up Version Cue and successfully saved an image from Illustrator.
But when I open bridge there is no sign of Version Cue on the left hand side, the help file suggests that I need to select some options for Version Cue in the Start-up Scripts, but they aren't there...
Has anyone had the same experience?

Adobe recommends that you do not follow the steps above to enable Version Cue CS4 in Bridge CS4.
Please see this thread for more details:
http://www.adobeforums.com/webx/.59b6d12f

Adobe Stock Photos Stuck in Trash and Photoshop CS2 won't run!

Okay, I apparently did something stupid. I'm not even sure how this happened, but I realized that Adobe Stock Photos folder was sitting on my desktop (I'm using OS X 10.5.6). I don't know when this happened and I didn't think I needed it so I dragged it to the trash. NOW I cannot run any of my Adobe software (includes Photoshop CS2, Illustrator CS2 and GoLive CS2).
I can see the folder sitting in my trash, but it won't let me drag it back out. So, just as a test, I tried dragging out the one other file (.jpg) and I can't get that one either. I know this isn't a Mac forum, but I'm desparate and cannot find anything to help me.
Probably I am going to have to reinstall everything and (of course) I can't find my CDs!!! Please don't get angry if I'm asking the wrong question. I've done an internet search and I cannot find any solutions.
Thanks, Anne

Adobe stock photos does not even exist anymore.
Have you tried deleting your trash? I have no Adobe stock Photos on my computer and everything works. try restarting the computer.

CS3 Version Cue not loading in Bridge

I'm trying to access a version cue server in bridge, but there is no button to access version cue in bridge. i know there is supposed to be a button in the favorites panel, but its not there, and there is no way to 'check it' in preferences. its checked under the startup scripts panel in preferences.
version cue server is started and running, its in my task manager as well as my taskbar.
I've tried uninstalling and reinstalling bridge and version cue several times, and that hasn't fixed the problem. I've tried unchecking version cue and sdkloader, then restarting bridge, then rechecking them, restarting bridge, to no avail. there is nothing in my inspector panel, nor in the inspector panel preferences. i even tried reinstalling all of CS3, that didn't help. but - i had the reinstaller save my preferences, b/c im apprehensive to lose all my custom workspace settings. i tried resetting the preferences in bridge with 'alt-ctrl' on load, didn't help.
any ideas would be great. if i can avoid completely removing CS3 (my preferences mainly) i would appreciate it.

You should see Version Cue under menu Edit => Preferences => and then select the General category. Version Cue should be the top left checkbox in Favorite Items at the bottom of the General category.
If you don't see Version Cue listed there, start the Version Cue server, and then start Bridge and try the above again. An easy way to start the server (provided that it has been started before, and is thus installed as a service) is to type the following at the Windows Command prompt:
net start "Adobe Version Cue CS3"
NOTE: You must include the quotes as shown immediately above.

Anyone here found a good replacement for Version Cue?

First, yes I realize this is a Photoshop forum. :-P I also posted this in the Version Cue section, but that forum hasn't seen any action in a month so I thought I'd pop on over here too. I'm assuming there are a few Photoshop users in here that use some kind of file management software.
At my company we decided a while back we'd set up Version Cue, and of course it got put off. Today I learned Version Cue is getting ditched, and isn't even included in CS5. (http://www.adobe.com/products/versioncue/)
So, I'm wondering if any of you have moved on and found a good alternative option. Version Cue has some very useful things to offer, in theory if not in practice, so it would be great if there is something out there that can accomplish the same things. If it's relevant, we use both Windows and Mac here at work.
I've never used a digital assets manager so am open to ideas. I'm assuming that we'd want:
• Versioning of documents (to roll-back to previous versions)
• File storage
• Sharing (perhaps a check-in, check-out system)
• Commenting ability would be a bonus
• Multiple users with variable permissions
• Compatibility with Adobe Drive (allowing access to behind the scenes Adobe data)
Anyone had any success, have any suggestions?
Thanks!

Here is how to put Mac widgets on your desktop: http://discussions.apple.com/thread.jspa?messageID=6292560&#6292560
And here is a iCal widget: http://benkazez.com/icalevents.php
It doesn't put your to-do list on there, so there is this widget: http://www.bluehenley.com/products/dobedo/
Hope this is more of what you wanted.

Version Cue Server 4.0.1 Update Problems

I've recently run into a problem with Version Cue Server 4.0.1. I've been using "Adobe Creative Suite CS4 Master Collection" without any problems until a couple of days ago when I ran the updates.
The updates locked up and failed on Version Cue, and after that, every time I right click on my desktop or in Windows Explorer, I get the error message:
"The specified module could not be found. C:\Program Files\Common Files\Adobe\Adobe Version Cue CS4\4.0.1\VersionCue.DLL"
Then everything crashes and reloads.
I called tech support and they said to reboot in a simplified mode, create a new administrator account, and reinstall version cue. Didn't work. I tried reinstalling both from the CD and from the downloaded update. Same problem. The installation goes most of the way and then fails.
I uninstalled Master Suite and was able to right-click again without problems, so I went back to a simplified boot and tried re-installing the software...which crashed my computer and caused the same right-click error message.
As I said earlier, everything worked fine right up until the point I ran the updates, so I know the software will run on my computer (Vista 32bit service pack 1).
Thoughts?

All,
I personally have been driving this issue at Adobe. As mentioned before, we've been hindered by the fact that we cannot yet reproduce the problem on a machine in our offices. But I've been doing all that I can to coordinate between customers and Senior Computer Scientists who are investigating this.
Here's the new information that has been learned by remotely debugging on customer's machines (great thanks to those who have made time for this!).
The problem is isolated to the binary patching function in our update components. This means updates that modify the files on your current system are impacted. Updates that simply replace the existing files with all new versions of the files, are not affected. While I don't have a complete list of which update uses which method, I can say that the recently released Photoshop CS4 and InDesign CS4 updates use a full file replacement method, so they should be no risk.
It was earlier believed that this problem only happened in the context of the Adobe_Updater.exe, which downloads the updates and runs them in with UI suppressed. This is now known not to be true, so "manual" running of the updates is not a valid workaround (sorry for those who spent time trying this).
There is some suspicions that the issue has to do with the temp folder being used by the updater. I've tested a private build with a change in this area on a couple customer machines, and got more elegant failures (didn't cause apps to stop working), but still no success
Lourens Van Der Jagt,
I found your observation about the "FAST IO DISALLOWED" messages to be very interesting, and forwarded that, along with results of my recent tests of the private build, to the devs.
One other thing that I found on the Vista machines I've looked at, which I'm curious about. On all machines I've looked at, the NTFS junction (looks like a shortcut) named "Program Data" in the root of the user folder is visible, while all other junctions are not. And, the junction can be browsed. All other Vista systems I've ever seen do not display this unless protected system files are asked to be displayed, and then they cannot be browsed.
I want you all to know that I have been working hard to represent you and get a resolution for this. I appreciate the hardship it presents to you, and I take it very seriously. Please keep the dialog going, and I'll try to keep updating here and in other threads as much as I can.
Sincerely,
Matt

Version Cue CS3 Change Default Local File Location

Hi All
I've done a bit of searching around and can't find an answer to this.
We have a bit of a Hybrid network which involves roaming profiles / TS profiles and all manner of stuff I have not yet found. The upshot of this is that profile size affects all manner of things.
Vesion Cue CS3 places local files into your user folders (and thereore your profile) by default.
Is there a way to change the default location of these files? I dont need them on a network share, the local disc is fine but just not in 'my documents'.
I am aware I can do it on a project by project basis, but as I deal in hundreds of projects this is impractical. That is to say I need to have the local files end up in the right place when I first sync.
Thanks Very Much for your help
Colin

I'm sorry Curt,
I don't understand your point.
CS3 does, in fact have Version Cue, and does put files in certain places. So I don't follow what you are getting at.

Connecting to Version Cue CS4 via Bridge?

This is the set up;
Windows 2008 Server: Running Version Cue CS4, no other software related to adobe products is installed, other than Version Cue, and any assets necessary for Version Cue to run.
Client Work Stations running Windows 7 Ultimate, with Photoshop CS4 and After Effects CS4 Installed.
When the clients open their bridge applications there is no visible way for them to connect to the bridge, located on the server, which is on the same network via the same router.
If you run Version Cue directly off of the same system you're trying to connect to it on, it shows up on it's own. How do you connect to a remove Version Cue CS4 server via bridge? Where is the option to even add it?
I assume this would be similar to the default set up any work group would use when using these two tools together. Why isn't there an option to browse for a VC server and put in it's IP or something. They're on the same network, so why can't we just see it and 'just' add it.

Jasker - Thanks you for trying to help, but it didn't work. I followed your directions. Then I attempted to restart the Version Cue server and a Safari browser opened and pointed to http://localhost:3703/ with the message "Safari cant connect to the server.
Safari cant open the page http://localhost:3703/ because it could not connect to the server localhost."
I just want it to start up again so I can properly retrieve all of our projects! Even if I can get it back up, I don't think I will use Version Cue the way we used to, now that I know how unreliable it can be.
Can anyone at least offer advice on how to salvage shared projects (created and maintained by 2 different users) from the Version Cue server when it's offline?

Trying to set up a version cue server

I'm new to Version Cue, never used it. I'm trying to use Version Cue through Bridge. In the Content window I see Browse Servers and Recent Projects, but not Start My Server. In the Bridge Preferences Adobe Version Cue and VersionCueSDKLoader are checked.
I checked both my original PS CS3 installation disk and the Adobe Installer utility to see if I needed to install anything but Version Cue doesn't come up as an item to install.
I'm using OS 10.5.2 on a MacBook Pro.
Would appreciate any advice.

I have a similar problem. I started to set-up my server, but when my browser launched I only got my home page, not the version cue set-up screen I was expecting to see. When I went back to the bridge I no longer had the option to start a server. Where do I go from here?

From version cue to ?

I am using CS4 now I want to upgrade to CS6. But before that I would like to know how to manage version cue files ? I know Adobe stopped version cue after cs4. Any help would be appreciated.

Here is the link to the location of the Adobe Drive Migration Tool User Guide (v3 of the tooling): http://www.adobe.com/support/adobedrive/pdfs/migration-guide.pdf
This tool can migrate data between Version Cue and any supported DAM server (such as CMIS compliant DAM servers or third-party DAM servers that have created a custom connector for Adobe Drive).

Working with Version Cue

So, my company just upgraded to the new CS3 suite. Everything
looks great, and we read up on Version cue, and are real exicted
about using/implementing it. It will clear up a lot of
space/duplicates and help keep us streamlined. I was reading
through the help section and Read this, "In Dreamweaver,
Contribute, and Fireworks, you have access to Version Cue features
only through Bridge. "
My question is.. How do you access it through Bridge, I read
through all of the help and found nothing detailing or outlining
how this is done, is it possible? do you have the ability to use
adobe dialog and check in/out??

ElanioBro wrote:
> So, my company just upgraded to the new CS3 suite.
Everything looks great, and
> we read up on Version cue, and are real exicted about
using/implementing it. It
> will clear up a lot of space/duplicates and help keep us
streamlined. I was
> reading through the help section and Read this, "In
Dreamweaver, Contribute,
> and Fireworks, you have access to Version Cue features
only through Bridge. "
>
> My question is.. How do you access it through Bridge, I
read through all of
> the help and found nothing detailing or outlining how
this is done, is it
> possible? do you have the ability to use adobe dialog
and check in/out??
If I choose Start > All Programs > Adobe Bridge CS3,
Bridge opens with a
menu at the top left that includes Version Cue. Here's a
screen shot
http://www.playingwithfire.com/cue.html
Is this not what you are seeing?
Linda Rathgeber [PVII] *Adobe Community Expert-Fireworks*
http://www.projectseven.com
Fireworks Newsgroup:
news://forums.projectseven.com/fireworks/
CSS Newsgroup: news://forums.projectseven.com/css/
http://www.adobe.com/communities/experts/

InCopy CS2 Copyfitting with InDesign CS3, Version Cue CS3

Hello. We are using InCopy CS2 together with InDesign CS3 as part of an Version Cue CS3 workflow. Certain stories do not copyfit exactly in InCopy CS2. They copyfit properly in InDesign CS3, but when the assignment with these stories is opened in InCopy CS2, the copyfit is close, but not perfect. We never had this problem when we were using InDesign CS2.
Has anyone seen this problem; can anyone suggest a workaround? (Incidentally, The copyfit looks just fine when we open the file in InCopy CS3; but we are NOT using InCopy CS3, because it causes synchronization problems - it reports that files are open, when they are not. )
Thanks for your help - Chris

The text engines have changed from CS2 to CS3 and again with CS4.
There's no way to get an accurate copy fit using a different version of InCopy than InDesign.
Bob

Version Cue and GoLive CS2

Similar Messages

Maybe you are looking for