Version differences were generated in structure KOMP.

Our company is going to upgrade ECC 6.0 version.
So I tried to test in 6.0 test system.
When I executed in SPDD T-CODE, I compared with prior 4.7 version
system.
I found that KOMP strucure is differ from 4.7 system version.
So errr is generated because version was not same.
I wish to adjust difference with 4.7 system version .
Answer me how version differences were not generated.

Hey,
I think it was added in 4.6B version.You can do one thing.
Go to SE11>KOMP table->system->status>Component version->one search icon is there,click that.
There you can find out whatever modifications are done with the table.
Shout me again if any other clarification is required.
And also don't forget to reward points
Thanks.

Similar Messages

New version no longer generates .cnt, .fts, or .hlp files?

Hi! I inherited a project to update a Help application that hasn't been touched in 7 years. I'm not sure what version the old one was in, I think it might have been 5, but I'm using Robohelp HTML version 7. It seemed to convert my files fine and I've made my changes. These are the output options I have available:
WebHelp
WebHelp Pro
FlashHelp
FlashHelp Pro
Microsoft HTML Help
XML Output
The developer who links to the Help application from his program is looking for three files ending in .cnt, .fts., and .hlp. When I outputted mine to WebHelp (which is what I normally use), these three files were not created. I researched the .cnt, .fts., and .hlp file types and discovered that they all seem to be opened primarily by Microsoft Help applications. This made me think that maybe I should be outputting the files as # 5, Microsoft HTML Help. Alas, none of the three required files were generated using this output method, either. For good measure, I tried publishing the files as each of the 6 output options but no luck, the three required files were not generated using any of these methods.
This is making me think that maybe in the last 7 years, Robohelp has made some changes and it's no longer possible to output .cnt, .fts., or .hlp files. Is this true? If so, I'll have to get the developer to change his code to point to some other file type, perhaps the Microsoft HTML Help .chm file. If it's not true, can anyone tell me how to generate these three files? Thanks!

What your developers are using is a WinHelp file. This is produced from the RoboHelp for Word application rather than the RoboHelp HTML application. Don't worry though as you still have this as part of Robohelp 7. Just look inside your All Programs list for it. It uses Word as the editor and produces the files your require. Of course your developer could also change the application to start using Webhelp which would negate you doing anything ;-)
Read the RoboColum(n) for a tips, tricks and musings on the Technical Communication Suite products.
Follow the RoboColum(n) on Twitter

Java, Jardiff Version Difference

HI,
we are using JAva Web Start to launch our application. in our application, we also have used version based implementarion. it is working fine & only JArdiff is getting returned.
However, there are some of our JARs which get automatically updated. If somebody from the front end generates the property file, JAR gets updated with required changes in version & jnlp change also. Generation of property files is a frequent thing. So if anybody for long time does not log in, the version of propery JAR on his machine will be much older than the latest version.
whenever such problem occurs, sometimes JArDiff doesn't wrk properly. It gives the message " missing signed entries" On checking for signing files, we found those files are intact & also get downloaded on client machine But after that JWS stalls giving above message. This problem occurs if the version difference is too much else it does not happen.
Also, server log shows that JARDiff is returned perfectly. I'm not getting why exactly the problem exixts & why it occurs only at few client machines. Can anybody throw light on this? pls..

Can you tell us what versions of Java Web Strat and Java are you running ?
/Dietz

Is include PRODH contained in structure KOMP in release 4.6A?

Is include PRODH contained in structure KOMP in release 4.6A?
I don't mean field PRODH, but namely .INCLUDE PRODH.
Maybe smbd has an access in 4.6A, please help.
P.S. namely version 4.6A (not 4.6B or 4.6C) required.
TIA, regards, Nikolai.

Hi,
Not sure whether your problem is solved. anyway, i had the same problem and it is solved.
what i did is, go to se11 -> 'PLPO_DI'<your structure name> -> display -> Utilities->Runtime Object -> Check. this will check the object consistency. Then try to re-activate your structure and reactivate your program as well.
This worked for my program, hope it helps.

How to find out the number of fields in generated proxy structure?

Hi All,
Can anybody help me to find out the number of fields in generated proxy structure in back end system along with controller fields.
i know how to get number of fields in XI system but i want the number of fields in back end system when we generate proxy including automatically generated controller fields.
Thanks in advance.
Regards,
Ujwalkumar

U mean u want to know at runtime?
Get the output from ur proxy as a string, count the number of "<" characters and divide it by 2. :-P
Of course, you'll have to treat the header fields separately.
Regards,
Henrique.

New Field Addition in Structure KOMP

*Hi,
We have requirement of having Material Description field in the Allowed Field Catalogs in order to fetch the same from Pricing Condition Table. Hence, as a first step, have added the MAKTX field inside the ZStructure inside Main Structure KOMP and activated the same. Then i have added the same field in Allowed Field Catologs of Pricing.
Now i have tried to create a new Pricing Condition Table with field catalog of Material Description (the added field), but there is no such field is available for selection.
Is there anything i missed to do, so that the newly added field is available during New Condition Table Creation with key combination of the added field.
Appreciate your prompt response on this.*
Rgds,

Hi Ravi,
Please check the following thread;
Re: Pricing - Adding new field to pricing catalog
also the following link
http://www.sap-img.com/sap-sd/how-to-create-field-in-komp-komp.htm
Hope this will help
Regards
Chandra

What is difference between data base structure and stucure in program

what is difference between data base structure and stucure declared in program level . can explain cleary if knows

Hi,
Data base structure is global decalaration you can reffer this structure in any of your developments, when ever you cahange this structure the changes automatically will get updated in all the programs.
coming to structures in program it is local to your program only, if you want to change the structure again you have to open the program and do the necessary changes.
Reward if useful.
Thanks,
Sreeram.

Difference btw table and structure???

Hi all guru's
What is the difference between table and structure??
culd you explain me???
regards
ss

hi Supriya,
structure is one single line, while a table can have as many lines as you wish.
hope this helps
ec

SMS_AD_SECURITY_GROUP_DISCOVERY_AGENT - Active Directory Security Group Discovery Agent reported warnings for 524 object(s). DDRs were generated for 0 object(s) that had warning(s) while reading non-critical properties.

Hi, can anyone help me troubleshoot the following please:
Active Directory Security Group Discovery Agent reported warnings for 524 object(s). DDRs were generated for 0 object(s) that had warning(s) while reading non-critical properties. DDRs were not generated for 524 object(s) that had warnings while reading
critical properties.
Possible cause: OU name or Security Group name may contain at least a Unicode character which has conversion problem between Unicode and your system ANSI locale(e.g. Korean characters in English System Locale). The site server might not have access to
some properties of this object. The container specified might not have the properties available.
Solution: Please verify the Active Directory schema for properties that are not replicated or locked. Refer to the discovery logs for more information.
Does the error relate to 524 security groups? There are several invalid search paths listed in adsgdis.log, are these related?
Thanks,
Dale

You'll have to examine the log to determine exactly which objects its referring to. Although this is in the context of group discovery, group discovery still creates DDRs for computer objects within those groups so it could be either groups or computers.
This is not a search path issue though as it's clear that the discovery process found 524 different objects, but as stated, it could not properly read criticial properties of those objects and thus did not create DDRs for them.
As mentioned, reading the log in detail will list the objects individually and the reason it could not create a DDR for it.
Jason | http://blog.configmgrftw.com

Versions difference in ecc 6.0

Hello experts,
What are the major and minor difference between the 4.6c and ECC 6.0
Please tell me the diffences
Thanks
Raghava

There are so many differences between the version in different objects
I will explain in two or more objects the difference
1 in the customer master in 4.6 version there is no partner function tab in the customer in xd01 t-code
and also there is no CIN tab in that version
but it is there in the 4.7 EE version
This is the major change from the 4.6cc to 4.7EE
2. in 4.7EE there is some settings that are related for CIN
which cannot be done in 4.7EE that means they need some patches for doing the configuration setting for the CIN
But we can do the same in the 6.0 version
These are the some of the settings that are differed in the two versions and in that two objects
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
http://help.sap.com/saphelp_47x200/helpdata/en/fc/e3003deddfae4de10000000a114084/frameset.htm
http://help.sap.com/saphelp_scm50/helpdata/en/28/b34c40cc538437e10000000a155106/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Re: Difference Between SAP Version ECC 4.6, 4.7, SAP 5.0, 6.0 with SA
Re: SAP version differences 4.5b, 4.6c and ECC6.0
You can find the difference in release notes of each SAP version.
Here are the links.
http://help.sap.com/saphelp_47x200/helpdata/en/fc/e3003deddfae4de10000000a114084/frameset.htm
http://help.sap.com/saphelp_scm50/helpdata/en/28/b34c40cc538437e10000000a155106/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
rewards if it helps

Date and version should be generating by

Hello All,
We are also using with IBM websphere portal in our environment.
But this is a Linux question than a product.
For our routine deployment we are doing export/import.
I want to run export by script for both source and target.
Regardless of how many time I run the same script I want export file will be generated by name,date and version #.
First time script will create source_fulltest20091215_1.xml,
if user runs scripts again it will create the name as source_fulltest20091215_2.xml.
Third time script will generates file name as source_fulltest20091215_3.xml
Please notice name of the file its increment by number.
Below is a general format of the script,
if I run exactly same script it will create the file called ‘source_fulltest20091215_1.xml”.
./xmlaccess.sh -in exportBase.xml -out source_fulltest20091215_1.xml -url http://hostname:port#/wps/config -user svc_wpsadmin -password 'helloworld'.
I want date and version should be generating by auto script.
Thanks

Review the output formatting of the date(1) command:
$ man dateand use it to compose part of the filename:
fn=fulltest$(date '+%Y%m%d%H%M')The version number is a bit tricky, there are so many choices about how to do it. One way, assuming you just want the filenames to be unique is to:
if [ -f ${fn} ]; then
   seqno=1
   while [ -f ${fn}_${seqno} ]; do
        seqno=$(expr ${seqno} + 1)
   done
   fn="${fn}_${seqno}"
fiThere are more succinct ways of expressing this, but this way will work everywhere.

Check box to Work Order to identify that they were generated from PM,Ins,Pr

Hello,
Would it be possible to add a check box to Work Order to identify that they were generated from PM, inspection or Predictive Maintenance?
How can we configure this and how can we set up to report on this.
Thanks.

There are many option to identify that order was from PM (which is planned) & corrective work orders.
Set up order types & train user to use specific order types when they build maintenance plan / Item to create work order.
Configure order type 'Define Default Value for Planning Indicator for Each Order Type' so that system knows what is planned & unplanned.
SAP note for the config:
(Define Default Value for Planning Indicator for Each Order T
In this section, you can define a default value for each order type for the order planning indicator.
The order planning indicator is used for selection and statistical analyses in the Plant Maintenance and Customer Service Information System.
Three order planning indicators are predefined by SAP:
Planned order. You should use this indicator for order types, for which tasks can be anticipated.
Unplanned order. You should use this indicator for order types, for which the task cannot be anticipated, but also need not be performed immediately.
Immediate order. You should use this indicator for order types, for which the necessity of the task cannot be anticipated, but where the task must be performed immediately.)
Hope this is helpful.
Ravi

BDoc Generated Message Structure

Hi All,
When I am creating a custom BDoc( Messaging), the message structure which system has generated do not have the namespace.
For example I am creating a messaging BDoc ZCOUNTR_MSG and assigning it to package ZCMG.
In the 'BDoc overview tab' under general data, I am entering Related Data Type as ZCRM_COUNTRY_EXT.
After saving, the system has generated a message structure with name ZCOUNTR_MSG000.
The following i have read in the documentation used to create the above example.
Note that a structure for the mBDoc will be generated. The name is built from customer namespace /CRMGEC/ plus short name of the BDoc. In our example the structure has the name /CRMGEC/ZCOUNTR_MESG.
Question:
Can some one please let me know, what should I do in order to happen the system generated message structure should prefix with name space /CRMGEC/
Or
Please let me know is there any impact if the system generated message structure do not have namespace /CRMGEC/
If some one can send me the exact procedure to create a custom messaging BDoc with example, that would help me a lot.
Maximum points will be rewarded if any kind of help/suggestion.
Thanks a lot in Advance.
Nadh R.

Hi Nadh,
Call up Transaction SE16.
Enter table name SMOG_MAPSG and choose 'Table contents (F7)'.
Enter 'Z*' as a selection criterion for TR_SEGDD. Choose 'Execute'.
To select all entries, choose menu option 'Edit -> Select -> Select All F9'. To delete all entries selected, choose menu option 'Table Entry -> Delete'.
Execute the action again in which the error occured. If you have source code that refers to the generated structures, change it to the new names (starting with /CRMGEC/).
For more information please refer SAP Note : 388756
Regards,
Johnny.

No billing documents were generated. See log

Hi Expert,
While doing billing trough VF01, i am getting below error message :
No billing documents were generated. See log
Error log is as below :
0025000513 010 Item category ZDOR TAX cannot be invoiced with billing type F2
Could you please tell me how to resolve this error.
Thanks.

Hi,
1> I have gone through transaction VOV7, in that item catagory is assigned with A. If i'll change it to B, will it affect any other billing documents ?
2> Also when i am looking into SD -> Billing -> Billing Documents -> maintains copying controls -> Sales document to billing document in this F2 is in the target anf Zdor is in the source but item category TAX is not present there, so do i need to add item category TAX there ??
Tell me where exactly i need to do changes, in both the above steps or any one of them ?
Thank you.

Structure KOMP

Dear ABAP,
I am an SD consultant and would like to ask you a simple question:
In a pricing formula using structure KOMP will we be able to cumulate quantities (mgame) if multiple items exist?
Thanks for letting me know
Kikas41

Closed but not answered

Version differences were generated in structure KOMP.

Similar Messages

Maybe you are looking for