Version doesn't work on external password protected disk image

Version doesn't work on external password protected disk image.
Any ideas?

Hi
Did you assign the external monitor as a primary display in the graphic properties?
I think you did it due to the fact that the Toshiba boot display appears on the external monitor.
But just moment please. The Tecra M7 was delivered with the Win XP Pro tablet edition and not with Vista.
Did you install it at you own hand?
I presume everything has worked running Win XP
Maybe you should try remove the graphic driver from the Vista system and use one from the 3rd site like www.laptopvideo2go.com

Similar Messages

Trying to create a password protected disk image in 10.8.4

Trying to create a password protected disk image in 10.8.4. I follow steps in Apple:Support but I get an error saying "Resource busy"?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

USB Flash Drive (with password protected Disk Image) copies files very slowly. Why?

I'm backing up some data onto a 32GB flash drive that I've put a password-protected Disk Image onto, and am copying this data into, but it is achingly slow. It's taking hours to copy just 500MB!
I have another 64MB flash drive that I have set up the same way, but this one copies files very quickly. I can't spot any difference between them in Disk Utility/System profiler.
For the record, the process I've used for bothe drives is reformatted to Mac OS Extended (Journaled), then created a new Disk Image onto each drive (just a bitsmaller than the maximum size of the drive to enable it to fit) with 128--bit encryption.
Does anyone have any idea why the 32GB drive would perform any differently? I am using the same USB port on my iMac for each drive, but am getting very different copying speeds. It's driving me nuts! Many thanks.

The drive seems to be working fine if I copy files onto it outside of the Disk Image file (there's about 200MB of free space left over after I added the DMG). So I can only deduce from that that it is something specifically to do with the DMG itself. Though, as mentioned, I compared the DMG on my (fast) 64GB stick and the DMG on this problematic (slow) 32GB stick in Disk Utility/System Profiler (and I originally set them up in an identical way, as far as I am aware), and they seem to be the same. But one is performing achingly slow. Even dropping a file into the mounted DMG takes a few minutes to even think about it. It's very odd.

Cannot open leopard password protected disk image

i had created a password protected disk image under leopard. Now that i have snow leopard i can't open it anymore with the right password. Since then i know that i have changed the name of the disk image also. does anyone know if either changing the name of the image or upgrading from leopard to snow leopord would explain why i cannot open the image anymore?

Neither change should matter. I suspect that the password is wrong, maybe missing a cap or lowercase item or a number. Find someone running Leopard, copy it over, and see if it'll open there.

How Safe is a Password Protected Disk Image?

I've created a Disk Image Volume with a password on my hard drive and have placed sensitive files into it as an alternative to using File Vault. Does anyone know if there is a way that these files be accessed without the password?
Thanks,
Joe

If you created the Disk Image Volume with a Password then it cannot be acsessd without said password.
It is the same with Filevault.. You cannot make changes without a Password.....Don

New Version Doesn't Work On ESPN

All I get is the black box on most of espn.com. The problem started when I downloaded the new version. I can watch video on most sites; but the screen simply stays black, with no arrows or control bar at the bottom (play, volume, etc.) on espn.com and a couple of others. I've tried most of the "fixes" I've found, to no avail. I'm using FP version 10.3.181.34 and IE 8 with Windows 7 on a laptop. I've uninstalled and reinstalled, and it still doesn't work. I don't have any adblock software, and I've tried it with a pop-up blocker on and off, and it still doesn't work. I've tried it with hardware acceleration enabled and disabled, and it still doesn't work. I've increased and decreased my security settings to every available level and tried it, and it still doesn't work.
Hard to believe this is an improvement. Now I can't remember what my old version was, or I'd just go back to it... it worked with everything on every site.

Perhaps to somebody who spends most of their time on a computer, and makes it their business to know how to do all these things, it isn't jumping through hoops. For someone with no time and less patience for such tasks, and who expects a computer company and its hardware and software manufacturers to automatically provide working updates for the equipment they paid good money for, it is a burden. I have spent hours trying to either update that driver or find out why it's a bad idea to do so. I happen to believe them when they advise against it, and suggest it could have other negative effects on other aspects of the system. Not only do I believe it, it's happened to me on more than one occasion over the years; so I'm understandably hesitant to discard the advice of the manufacturer and give it a try on my own.
I updated all my drivers from the Dell driver update utility; and like the Intel site said, there isn't an updated one for my adapter. So, my choices appear to be, try the driver that isn't necessarily designed for my system, and hope for the best; or just uninstall the new version of FP, and reinstall the previous version that worked just fine. Because I'm not savvy enough to undo any potentially disastrous consequences from using the wrong driver, I'm leaning toward the latter resolution. I'm also having a tough time understanding how that single driver update is going to make my FP finally work for only the ESPN site. As I said, with the current driver, it works on virtually every other site, and the old version of FP, with the current driver, worked on every site, bar none. So, essentially I'd be installing a whole new driver that may or may not make my FP work on a single site. See what I'm getting at? It doesn't seem plausible that the driver was designed for the sole purpose of making one application work on a single site. Thanks for all the assistance; I appreciate everyone who devoted so much time to my issue.
Date: Sun, 7 Aug 2011 18:59:06 -0600
From: [email protected]
To: [email protected]
Subject: New Version Doesn't Work On ESPN
G8R8U2 wrote:having to jump through all these hoops...
Installing a simple driver update is "jumping though the hoops"...? I don't know why the Intel utility gave you that strange message; another easy way to update your outdated drivers is http://drivermax.com/ - the free version allows up to two driver downloads per day.
>

I have ordered complete version, but there is no premiere and after effect to download. My old account (also complete version) doesn't work either.

I have ordered complete version, but there is no premiere and after effect to download. My old account (also complete version) doesn't work either.

If you machine does not meet the system requirements for any applications, those applications will not be listed for installation.
Premiere Pro - http://helpx.adobe.com/premiere-pro/system-requirements.html
After Effects - http://helpx.adobe.com/after-effects/system-requirements.html

HT1277 I cannot open the new email icon for 10.6.8 and the latest secrtoy update. My old "Stamp" icon email won't let me in either indicating that the new OS version doesn't work. Please help

I cannot open the new email icon for 10.6.8 including the latest security update. My old "Stamp" icon email won't let me in either indicating that the new OS version doesn't work. Please help. I have spend over 4 hours installing and reinstalling updates, etc. and I don't know where to go from here.....

Mac OS X v10.6: Mail.app won’t open, or "You can't use this version of Mail…" alert after installing Security Update 2012-004:
http://support.apple.com/kb/TS4424?viewlocale=en_US&locale=en_US
Fellow user Grant Bennet-Alder offers this solution:
Some users have reported this problem if the Mail Application has been moved out of the top-level /Applications folder, or duplicated in another location.
When the Security Update is done, the old version of Mail is disabled.
The solution has been to:
1) make certain Mail is in the /Applications folder
2) There is no other copy anywhere else.
3) Once steps 1 and 2 have been done, Manually download and re-apply the Security Update (2012-004) by hand.
Security Update 2012-004 (Snow Leopard)
If the Mail.app has been LOST, it can be re-installed by applying the 10.6.8 version 1.1 combo update. But this update is quite large and it is usually not necessary:
Mac OS X 10.6.8 Update Combo v1.1

No password asked for Protected Disk Image...

I set up a Protected Disk Image using the given instructions yet when I click on it it does not ask for the password I set for it...? I thought it worked by having to ask for the password before it opens...?

It can be, that the password is saved in the keychain. When it is, it not ask for the password.
When you create an Protected DiskImage, you can choose if the Password should saved in the Keychain or not.

How Can I Password Protect An Image Field

Is there a trick that you know of to password protect an image field?
I have an image field, Only few directors allowed to use it.I want to restrict others from using it.

I put a button beside the image field that teh user can click to activate it. On the Initialize event of the Image field set the access to "readOnly" (ImageField1.access = "readOnly". Then on the click event of the button use code like this:
var pswd = app.response("This image is protected by a password. \n Please enter a valid password.");
if (pswd == "password"){ ImageField1.access
= "";} else
{ app.alert("You entered an invalid password!")
Paul

Lightroom 5 doesn´t work as external editor

Problem with Lightroom 5.
my workflow on windows 7 was managing the photos with Zoner Photo Studio version 16- then sending the picture from with : open with to lightroom.
. After unistalling updates 5.3 5.4 or 5.6 it doesn´t work .
Does anyone know this problem?
Thanks

Lightroom is not and will not work as an external photo editor as it is a non-destructive digital asset manager and editor that works through it's own catalog database. All images have to be imported into Lightroom before any development can be undertaken.

Canon mini Disk camera doesn't work if external drive connected

A long story.      Anyway, I have a MacPro Intel Dual Core 266 Ghz with 5 Gbs RAM, 4 internal hard drives HD1~HD4 (HD1 OSX 250 and three 500Gb) and two external HD5 (two partitions~HD5 & Time Machine Backups) and HD6 (1 Tb each).
I've been using a Canon mini DV video camera FV-M10 (Firewire 400) for live video (Skype/iChat) and also for importing video into Final Cut Express, After Effects or iMovie up until a few days ago. Both "live" video and from the recorded mini cassette tape. Then all of a sudden not one of the software recognized my camera anymore. I tried both Firewire 800/400 and USB2 connections using a few different cables. In Skype...(sometimes) it automatically shows the name FV-M10 in the camera slot, but the screen is black. No, I checked if I left the cover on. I checked my Sony WX-5 digital camera and see if that is recognized. Yes, both pics and AVCHD videos are seen using the USB connection.
The problem started like this.
I was downloading a file. Had to work for an hour and when I came back upstairs. I noticed that the screen was frozen.   So, I shut the Mac down. And when I started it again, well nothing happened except for a grey screen. A half~sized cursor was stuck up in the top left. But, my mouse also had a cursor which was movable.
It wouldn't even recognize the OSX Install Disk holding down "C" or "Option". Only starting with "Shift" held down, "Safe Boot" could I use the basics like Mail, Safari, Firefox.   NO sound and no video. Tried a few times as well as cleaned my OSX HD1 hard drive and re-installed from "Safe Boot" mode".   So, I had it sent into Apple Tokyo for repairs.   Apple put in a new board.     Great!      I came it back in two days.   I cleaned the OSX hard drive and re-installed Mac OSX with the up-dates as well and got some of my main backed up stuff Mail, bookmarks, address book etc.   It started fine.     But, when I went to use Skype, iChat, iMovie or Final Cut Express they still couldn't recognize my camera. I had been using the Canon FV M10 camera for a few years with both external hard drives on. There were never any problems until just before I sent it into the shop.
There was only one way to use my camera. Un-Plug the external HD6. Then the camera functions fine. but remember I had been using this camera with both HD's for around two years without any problems.
Notes on symptoms: and what actions I took.
Front connections: FW400 Canon camera. FW800 (Tried connecting HD6)
Rear Connections: USB2 1) MidiMan 2 x2   2) mouse 3) Canon Printer
                               FW400 HD5 FW800 (tried HD6)
With HD6 Connected.
iMovie 11 9.02 : Start iMovie O.K. No camera on.   Turned camera "on" then "No Camera Connected" notice came up.   (did this a few times)   Turned camera off.   Quit iMovie.
2nd start: Camera On.   iMovie freezes.   Spinning Colored beach ball.   I then Force Quit Option-Apple-ESC
iMovie shows (not responding) When I turn off the camera. (not responding) disappears and iMovie is working again. But, "No Camera Connected" shows again. Quit!
Un-Plugged (Ejected) HD6.
When I un-plugged HD6,    (tried both the front and rear connections).   iMovie still on.
"No Camera Connected" I Quit iMovie.
Re-start iMovie: Camera on… Live video and record miniDV tape can both be seen.
Skype: Both live video and mini DV tape recording even plays back over Skype screen.
iChat (same as Skype) O.K.
Since Apple replaced the board 661-3932 Card Video, NVIDIA GeForce 7300 GT which cost just about $X00.00 (¥XX,000).   I assume that they don't also check all the connections etc. I mean from the connector to the video board.
The call to Apple Tokyo today.
Just talked to Apple (Mac) Tokyo about my computer problem. Seems like they're trying to squeeze their way of more repairs by saying I have a hard drive configuration problem.   But it doesn't seem like that!   I worked with it 2~3 hours today...and here is the basic problem.
I've used the Canon FV M10 mini DV camera with Skype, iChat, iMovie and FCEx for few years (HD6) is over a year old-the most recent add on) with no problem.    With both external 1Tb hard drives. And Apple said that it's a 3-party problem. (different makers etc.) But, it's NOT!     Yes, they put in a new board.   But, I'd say the problem is from the connection (where I plug the cable into the Mac) to the board.
When I connect HD6 (1Tb ext hard drive).   FW 800 (either back or front connection) the video camera doesn't work in Skype, iChat, iMovie, or Final Cut Express.     If I eject and Un-Plug HD6 all of them work fine. The camera "live" or the camera playing back the mini DV tape video.
Wouldn't this be a problem between the connections (front & back) to the new video board? Or does anyone have an answer.   Apple seems to have said, "We can't help you".   Please someone help! thanks

+My mini isn't responding to startup commands like "C" or "D" from the keyboard.+
You'll need a wired usb keyboard for these commands to work -- and the Apple Aluminum keyboard won't work either.
But just about any PC usb keyboard will work. Alt maps to Option and Win-key to CMD.

RD Session Broker + NLB doesn't work for external users (internal users on network/WAN are OK)

Hi all,
I have run into an issue as the title of this question suggests.
So the senario is, I have (all Virtual):
2x 2008 R2 Remote Desktop Servers
1x 2008 R2 with Session Broker install
I haven't configured any RD settings on the session broker server (i.e. RD virtual desktop, RD Gateway, etc) It's purely setup as the RD Connection Broker
Each of the RD servers I have configured 2 NIC's. The 1st NIC is configured with NLB (NLB only setup for traffic on port 3389 all other traffic isn't handled by NLB). The other NIC is configured to be used only for session reconnection. I'm hoping this is
the right configuration as it's how I have interpreted these guides:
http://technet.microsoft.com/en-us/library/cc772418%28WS.10%29.aspx
http://technet.microsoft.com/en-us/library/cc771300%28WS.10%29.aspx
Please correct me if I have setup the servers incorrectly and what should be differently.
I have setup the NLBs Cluster IP. A rule has been set on the router to make it available externally
This worked fine with an old single RD Server (same IP as NLB Cluster IP, currently offline so no conflict) before the RD Farm was implemented. So I know the port forwarding is OK.
So NLB and Connection Broker Load-Balancing work well for users inside the network. It spreads sessions evenly and there is no problem with DNS resolving the farm name etc. Sessions that are disconnected are reconnected to the same server, etc.
Accessing the TS Farm from the external address isn't so successful
Connectivity is random. Rarely it works, sometimes it gets to "initiating remote connection..." and then disconnects. It doesn't work more times than it does.
So what do I need to do to get this working? Is there another component or something else that I need to configure to get it all working?
I look forward you your help
Thanks,
Trent

Hi Trent,
If both the RD session broker and the NLB are working fine in
the internal network, I suspect that there is something wrong with the external connection. I’d like to confirm the following questions to narrow down this issue:
1.
Can you PING and telnet this RDS farm name when encountering the “disconnect” issue? For example: telnet farmname
3389.
2.
Can you individually connect to the RDS server when failing to connect it via farm name?
3.
Did you configure any certificate on the RDS server or RD gateway server?
4.
Do you get any event log when this issue happens on the server and client side? If yes, please let me know it word-by-word including the event ID.
Thanks.

Forgot my adminpassword, i have tried the reboot with initial disk doesn't work i can't downlad anything, I am able to log on but the name and password to get in my computer doesn't work for admin password. i am about to give up any suggestions?macbook10

forgot my adminpassword, i have tried the reboot with initial disk didn't work, i am able to get into my computer with name and password, but this same name and password doesn't work as an administrators password when i want to download or change things.
do you have any suggestions? Im about to give up, i can't even access wireless have to use a dsl
pretty sad

... this same name and password doesn't work as an administrators password when i want to download or change things.
It's probably that your Keychain password is not the same as your login password. If you configured your computer to log you in automatically, you may not have used your login password in so long you forgot it.
There is no way to retrieve the "login" Keychain password, but you can reset the Keychain from the Preferences menu: select it in the Keychain Access menu and select "Reset My Default Keychain". This will create a new, empty Keychain but the old one will be saved should you ever remember its password.
The result of this is that you will have to supply passwords for everything that requires it, since without your Keychain they will no longer automatically fill themselves. However, once you supply them and store them in your new Keychain, they will be remembered.

ITunes 6.0.4.2 danish version doesn't work

I have just downloaded an installed the iTunes version 6.0.4.2. But the DANISH language doesn't work! Everything is just shown in ENGLISH. And of course i prefer to see iTunes in my own language (danish)...
When i change the language settings in Preferences -> General to danish, and restarts iTunes, nothing happends. iTunes is still showing the english version.
Any suggestions?
Thanks
Windows Windows 2000

Do you EVER read ANYthing? I suspect not.
I guess you should, first of all, read the response of the person whom I (in your unthinking, misguided, and incorrect opinion) "bashed".
I know you won't do that so, in summary .... he did do what I recommended that he do and ..... mirable dictu! ..... his Shuffle now works!
Whoodathunk.
As for the rest of your screed .... frankly, if your tone with Apple Support is the same as you use here in these user-to-user forums, I'd be amazed if you could get anyone to help you at all. I guess you haven't used the chat feature, I guess you haven't used the online troubleshooting, I guess you haven't read or done any of the many things that are ..... ohh, never mind.
Okay, so it's a waste of time and bandwidth to revisit all of this with you .... your mind's made up and I'll not try to confuse you with more facts. For others reading this unfortunate thread just be aware, as pohlman so very clearly is not, that (a) there are many other resources available, beginning at but not limited to the iPod Shuffle Support Page ( http://www.apple.com/support/ipodshuffle/ ), (b) that the iPS actually does and will work on your machine, (c) that there forums are strictly user-to-user and are not any official part of iPod Support, and (d) that anyone posting a valid question here will usually, eventually, find some other user trying to answer it.

Version doesn't work on external password protected disk image

Similar Messages

Maybe you are looking for