Version error while creating info package of data source 0fi_gl_10

Dear Friends,
I have replicated the data source 0fi_gl_10 into sap bw but while creating info package i am getting error " The DataSource 0FI_GL_10(E01CLNT200) does not exist in object version A". IS the manual activation always should be done for that ?
Regards
Nilesh

Hi,
Please check if the veriosn of DataSource is A or not. Sometimes it shows as active but if you open the datasource then it might be in modified version only. Do activate it manually, it will serve your purpose to create a infopackge.
Regards,
Anjum.

Similar Messages

Error while creating Info Package

Hi,
I am new to SAP-BW .Could anyone help me in fixing the following error .
I have created an Info source for characteristic data and then trying to create a Infopackage to load master data , I have used the characteristic Material Number(IO-MAT) in this case .
When creating the Info Package I got two data sources in the pop up , Material number (Master data)IO_MAT_ATTR and Material number (Texts) IO_MAT_TEXT .
I was able to load data from a flat file into Data Source Material Number (Master data) But when I was trying to follow the same procedure and load the data for 'Material number(Texts) IO_MAT_TEXT' it gives me the following error .
Select the Language field in the source system -> Long Text
I am not able to figure out and proceed further. Pls help me out.
Regards
Sudha

I have another question..I was able to fix the error regarding info package but unable to load the data..(data load is being failed)
In the DataSource/Transfer Structure I have LANGU , /BIC/ZB4_MAT (Material Number infoobject which i created) and TXTSH Fields ..
the flat file which i used has Language, MaterialNumber,description pattern alone..
(eg . E , M001,cookie ) and when i try to load this data..and check in the Monitor - Administration Workbench..it shows as unsuccessful..
The following error msg :
Error message when processing in the Business Warehouse
Diagnosis
An error occurred in the SAP BW when processing the data. The error is documented in an error message.
System response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
I could'nt see the long text of Help information...
could you help me out in figuring out this..
Points assigned for previous answer..
Regards
Sudha

Error while creating a new report data source in Sharepoint Document library

I installed SSRS(sql server 2012 SP1) in my sharepoint 2013 farm(single server installation).
I have installed SSRS addin for report also.
I created a document library and included the report data source content type, report builder report and report builder model content types. On click of any of these content types i get the below error.
"new Document requires a Microsoft SharePoint Foundation-compatible application and web browser. To add document to document library, click on the 'Upload' button."
I am using windows 7 64-bit operation system with Google chrome and IE 8 64 bit.
Any help would be appreciated.

Rakesh, is this an SSRS question?
This doesn't look like Power View.
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Update mode options while creating info package

Hi all .
while creating info package in update tab we have different radio buttons as
FULL UPDATE,DELTA UPDATE,INTIALIZE DELTA PROCESS. could you pls explain this optons.
Thanks in advance.
Cheers,
sami.

Hi Sami,
We have two update modes 1)Full update 2)Init Load(to enable delta)
Full Load --->Master data Load
Init Load----->Transaction data Load.
Full Update-To load Historical Data.
Init-This is done to enable the Delta Upload.
Delta will be done only if the Init has happened.
For deltas they are Data source specific which are delta enabled.
1. Full Load (Extracts whole data available in source)
2. Initialization (without data transfer): Enables only delta and no data.
3. Initialization with data: Extracts whole data from source and enables delta.
4. Delta: Extracts only modified or new data.
Above modes works for Master as well as Transaction also.
For further information check this link:
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a65dce07211d2acb80000e829fbfe/frameset.htm
Cheers,
Tanish.

Error while creating info object

error while creating info object a character
Info object may be a maximum of 000060 digits...... what would be the error?
Thanks ALL

Hi,
The maximum length supported by one CHAR type infoobject is 60. Check whether you have assigned more.
If you have to load more length ( more than 60) split the total thing into different infoobjects. Create different infoobjects and split the total thing into them - like 1st 60 char in 1st infoobject, char 61-120 in 2nd infoobject and so on. Then you can again concatenate them.
Thanks,
Indrashis

Error while creating Info Spoke....

Hi,
I am facing one problem while creating Info Spoke.I have 4 DSO which included in one Infoset & that infoset incluede in one Multiprovider. I want to creat info spoke on this Multiprovider.But when i changed the tab or at time of save & activate it gaves me error as "InfoObject ZCGNCRM2___F100 is not available in version A". I checked this info-obj.its already in active version. I reactivate it.I reactivate infoset & multiprovider also.But still exist this error.
Please suggest me any solutuion.

Hi Sandeep,
Check this info object is included in any of your DSO or Info set and Multi provider.If yes check all are active or not.
activate the info object once again using program RSDG_IOBJ_ACTIVATE and activate your Info spoke
Check below article
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0d48577-9542-2e10-05a1-d6c1e07ea641?quicklink=index&overridelayout=true
Regards,
Venkatesh

PowerView error -Cannot create a connection to data source 'TemporaryDataSource'.

Hello and thanks for the time.
I am getting the following error when trying to create a powerview report. I don't get where is this TemporaryDataSource is and how do I check the permissions on it? that is what this error is pointing to, no? I tried re-installing the
SQL reporting add-in and no go there. SQL Browser services are running. I can see the file in Excel just can't create a powerview report. any and all help is appreciated. thanks.
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
error occurred while loading the model for the item or data source 'https://teamsite.domain.com/POWERPIVOT/PowerPivot%20Gallery/Test.xlsx'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink
xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'https://teamsite.domain.com/POWERPIVOT/PowerPivot%20Gallery/Test.xlsx'. Verify that the connection information is
correct and that you have permissions to access the data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'TemporaryDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error
navigate to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>

Hi,
Issue not supported in sharepoint on-premise team.
In addition, as this issue is related to Powerview, I suggest you create a new thread on for Powerview forum, more experts will assist you.
https://social.technet.microsoft.com/Forums/en-US/home?forum=powerview
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Power View error: Cannot create a connection to data source 'EntityDataSource'

I have Power View on SharePoint 2013. I have both Multidimentional and Tabular model in use.
I have several Report.drlx file in Report libary in SharePoint.
My colleague is getting following error when building report by dragging Facts and Dimentions to report.
On the hand, I'm not receiving error.
Error is cannot create a connection to data source 'EntityDataSource'
<detail><ErrorCode xmlns="rsErrorOpeningConnection</ErrorCode><HttpStatus">http://www.microsoft.com/sql/reportingservices">rsErrorOpeningConnection</ErrorCode><HttpStatus
xmlns="400</HttpStatus><Message">http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="Cannot">http://www.microsoft.com/sql/reportingservices">Cannot
create a connection to data source 'EntityDataSource'.</Message><HelpLink xmlns="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=12.0.2000.8</HelpLink><ProductName">http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=12.0.2000.8</HelpLink><ProductName
xmlns="Microsoft">http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="12.0.2000.8</ProductVersion><ProductLocaleId">http://www.microsoft.com/sql/reportingservices">12.0.2000.8</ProductVersion><ProductLocaleId
xmlns="1033</ProductLocaleId><OperatingSystem">http://www.microsoft.com/sql/reportingservices">1033</ProductLocaleId><OperatingSystem xmlns="OsIndependent</OperatingSystem><CountryLocaleId">http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId
xmlns="1033</CountryLocaleId><MoreInformation">http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation xmlns="<Source>Microsoft.ReportingServices.ProcessingCore</Source><Message">http://www.microsoft.com/sql/reportingservices"><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message
msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=12.0.2000.8"
xmlns:msrs="Cannot">http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source>Microsoft.AnalysisServices.AdomdClient</Source><Message></Message><MoreInformation><Source>Microsoft.SharePoint</Source><Message>Could
not retrieve a valid Windows identity.</Message><MoreInformation><Source>mscorlib</Source><Message>WTS0003: The caller is not authorized to access the service.</Message></MoreInformation></MoreInformation></MoreInformation></MoreInformation><Warnings
xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
Kenny_I

Hi Kenny_I,
As per my understanding, I think this issue may be caused by your colleague has no permission to access to data source 'EntityDataSource', it is a Kerberos issue. When report server uses ‘Windows authentication (integrated) or SharePoint user’ as the credentials
to access the data source 'EntityDataSource', the authentication would be failed. So we should try to check if the issue is in this scenario. If in this case, we should change the credentials to stored credentials.
Besides, if we don’t configure C2WTS Service Account to use Local System, it needs the following local policy rights:
Act as part of the operating system.
Impersonate a client after authentication.
Log on as a service.
For more details, please refer to the following blog:
http://www.codeovereasy.com/2014/01/powerview-report-fails-no-credentials-are-available-in-the-security-package/
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Error while creating a package

When I am creating a package which has 3 procedures(x,y,z) I am getting an error saying "Subprogram or Cursor "y" is declared in a package specification and must be defined in the package body. I have put the code in the package body script but I keep getting this error. Please Help.

Surely we will if you can paste the code and the error that you get. Remember to paste the code between[b] [pre] and [/pre] tags to retain the format.
Cheers
Sarma.

Error while activating info package.

Dear all,
While creating and activating the infopackage, system throws the message"Table /BIC/B0001524000 is too long (>004030)"
What could be cause for this error.How to analyse and correct the error.
Your experts solution would be highly appreciated.
Regards,
M.M

If your infosource is too long containing too many infoobjects or lengthy infoobjects you will get this error. To correct this you have to reduce the length of infoobjects used in the infosource or remove unwanted infoobjects in the infosource.
Then this error will not appear.This is a SAP standard restriction

Error while running info package

Hi,
I am getting a error while loading the data till PSA.
Transfer structure field not contained in the data source.
Please suggest if any one know the solution to resolve this.
Regards,
Haritha

Hi,
The error is coming because you added some fields in communication structure which are not available in data source. Probably you have enhanced the data source and you added the enhanced object in communication structure but data source is not replicated to match with enhanced data filed.
Regards,
Kams

Error while creating WBS element.. regarding source structure

I am creating a project and then a WBS element. Its a investment project. While creating WBS element XXX, it gives me error that "WBS element XXX: SOurce assignments for source structure A1 missing in Investment Profile ZZZZZ."
What shall I check? what could be the reason?
Thanks,
A

hi,
In this IMG activity, you define the source structures used when settling and costing joint products.
A source structure contains several source assignments, each of which contains the individual cost elements or cost element intervals to be settled using the same distribution rules
Just consult with your CO Consultant...
Venkatesh

Error While Activating BI Web service data source based on MDM XI.

Dear experts,
Need help with an error that i am getting for a BI data source based on XI MDM. An extra field was added in the data source as part of business requirement and it works fine in dev environment but when we transported the changes to Q environment it is always giving following error.
The web-service based communication structure in the data source in QA is not getting updated with the new field in the target system.
Any inputs or pointers would be appreciated.
Thanks,
Abhishek

Many thanks for your help. This solved the issue for our .NET code, however the leak is still present in the report designer. I was also wondering if you could help further: because of the limits on the java memory process is there a way to ensure that a separate java process is started for each report that is loaded in my report viewers collection? Essentially the desktop application that i have created uses a tab control to display each type report, so each tab goes through the following code when displaying a report and closing a tab:
Is there a way to ensure that a different Java process is kicked off each time that I display a different report? My current code in c# always uses the same Java process so the memory ramps up. The code to load the report and then dispose of the report through closing the tab (and now the Java process) looks like this:
    private void LoadCrystalReport(string FullReportName)
      ReportDocument reportDoc = new ReportDocument();
      reportDoc.Load(FullReportName, OpenReportMethod.OpenReportByTempCopy);
      this.crystalReportViewer1.ReportSource = reportDoc;
    private void DisposeCrystalReportObject()
      if (crystalReportViewer1.ReportSource != null)
        ReportDocument report = (ReportDocument)crystalReportViewer1.ReportSource;
        foreach (Table table in report.Database.Tables)
          table.Dispose();
        report.Database.Dispose();
        report.Close();
        report.Dispose();
        GC.Collect();
Thanks

Error while doing DELTA Extraction (generic data source)

Hi BW Experts,
In my R/3, I have a generic data source ZBUT_VW.
It receives data from a View which is created based on couple tables.
When I do full load to the corresponding ODS, it is successful.
But after that I delete the ODS and created CUBE with DELTA
I have Initialized delta.
When I do DELTA extraction, it fails.
The error The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
I delete the initialization load and trying to do DELTA extraction again and it Fails.
With the same error
Please let me know how can I resolve this problem.
URGENT
gaurav

I dont think it is possible to have to additive delta with creation date.
Try a full load to cube to check if the extractor is working.

Error while creating Info Object in Info object catelog

Hi experts,
I'm making few info object in info object catelog but while activating system giving error mesage as "Error when generating master data routines"
can any one tell what's the problem and what needs to be done.
Sumantra

Hi
let me know weather r u using any reference object which contain the routinee.
regards,
chandra.

Version error while creating info package of data source 0fi_gl_10

Similar Messages

Maybe you are looking for