Version in MD61

Hi Guys
Whenever i create a demnd in MD61 with any version , the same is relevant for MRP ( becos of default tick ) , i needs to have this only when the version is 00. is there any setting or should i use exit only.... ( to remove the tick for versions other than 00 )
Prasanna

Dear Prasanna,
In Md61 Screen ,in the top menu's Goto --- Settings -
User Parameters(or Press
F5).
In that remove the tick mark against the check box for original quantity Indicator
 & for active check box.
This is valid for other versions than 00.I mean when create requirement for any
versions other than 00,the tick will not be present.
For 00 version for the original quantity alone will be seen.
Reward points if useful.
Regards
Mangal

Similar Messages

Procedure on Product Group and Versioning in MD61

Hi,
Can anybody send me a step-by-step procedure on how to execute the product group and versioning function in MD61at ching_pb @ yahoo com?
Tnx.
Regards

Dear Ching,
Are you working in an SAP version ECC 5.0 or 6.0?Then follow these steps.
1.Create a material using material type PROD in MM01.
2.Assign the materials to the product group in MC86.
3.Create a plan for this product group in MC81 for an inactive version.
4.Disaggregate the plan or create a production plan in MC76 for the same inactive version.
5.Transfer the requirement's to demand management in MC76 from inactive version to active version 00.
Check and revert back.
Regards
Mangalraj.S

Prod Version Slection during conversion of planned order to production orde

Dear Experts,
I have two BOM for a semi finished product. I have created two production version for the same. After MRP run, it created planned order for BOM1. This is fine.
My requirement is, when I convert the planned order to production order, it should ask for selection of production order as it ask while creating the production order using CO01. I know that I can select the alternate prodution version by reading the PP master data. Can system ask for selection of production order while converting the planned order to production order.
Thanking You,
Chetan

Dear Chetan,
If you have manual selection of production version set in OPL8 and if you have set the BOM selection method as 2 in
MRP 4 view of the material master then,
1.If you create a production order manually then the system displays the pop up to select a production version.
2.If you are converting the planned order into a production order then it picks up the one which is
present in the planned order.So obviously if 2 production versions are there with same lot size and
validity dates,then the system picksup the first one only during MRP run.
Even if it picks up the first prod.version in planned order,but while converting click on master data and
change the production version if required.
3.Otherwise what you can do is set the production version in MD61 itself ,so that its going to be
considered during MRP run.
Check out and revert back.
Regards
Mangalraj.S

Selection of production version

dear
I have scenario like below
have a BOM for Halb with BOM usage as 1Have another BOM for same material with usage as 3
So i created two production version...i have a common routing for both version
This particular halb is phantom item in bom level
No what i want to achive is that
1.system need to select first PV if the demand from Fert
2.System need to select second PV if the demand from Halb itself(sometime a manual production order)
So psl tell how to control selection of production versionon this scenario
AF

Dear Abu,
Check by making these settings.
1.When the demand flows from the finished product to sub-assemblies and components,then in this case the system always
picks the first production version(assuming the lot size,valid from and to date is same for the different production versions for
the sub-assembly) when you maintain the BOM selection method as 2 in the MRP4 view of the sub-assembly.
2.When you provide the demand for the sub-assembly directly mention the second production version in MD61 and carryout
MRP and check the results.
Regards
Mangalraj.S

Manual selection production version during order creation

hello!
i have setup production orders that during order creation the production version has to be selected manually. this works fine in CO01 and CO40. but in CO41 the production version is determined automatically - where would i change that setting?
best regards,
matthias

Dear Matthias,
In my understanding it is not possible in standard SAP.
If you have manual selection of production version and if you have set the BOM selection method as 2 in
MRP 4 view of the material master then,
1.If you create a production order manually then the system displays the pop up to select a production
version.
2.If you are converting the planned order into a production order then it picks up the one which is
present in the planned order.So obviously if 2 production versions are there with same lot size and
validity dates,then the system picksup the first one only during MRP run.
Even if it picks up the first prod.version in planned order,but while converting click on master data and
change the production version if required.
3.Otherwise what you can do is set the production version in MD61 itself ,so that its going to be
considered during MRP run and same will be included in the planned order.
Check and revert back.
Regards
Mangalraj.S

Produciton version selection in MRP

Dear all,
we have prepared alt bom scenario for MTS with two prod versions.
I am facing one problem of production version selection while MRP.
In MTS scenario, system is picking the prod version no. 1 by default while creating order.
1. How we can configure/change the selection of Prod version while MRP?
2. I need to select the prod version on my choice in MTS / MRP(depends on materail availability)?
Thanks,
Jeevan

Hi,
Production Version in Material Master in tab page "MRP 04". If BOM or Routing changes then PV also change. In Selection method two options are available related to PV- Selection by order quant. 1 Selection by explosion date 2 Selection by production version 3 Selection only by production version 1)With Selection by order quantity, the system chooses the alternative BOM into whose lot size range the order quantity falls. The lot size range and area of validity of the BOM apply. 2)With Selection by explosion date, the system chooses the alternative BOM into whose area of validity the date falls according to the setting BOM via dates. 3)With Selection by production version, the system chooses the alternative BOM defined in the valid production version. The lot size range and area of validity of the production version apply. 4) With Selection only by production version, the system chooses the alternative BOM defined in the valid production version. The lot size range and area of validity of the production version apply.
1. How we can configure/change the selection of Prod version while MRP?
=>OPL8 ->Production Version->1 Manual selection of production version
In MD61 - You can set in User Parameter-Requirements type - LSF Make-to-stock production
2. I need to select the prod version on my choice in MTS / MRP(depends on material availability)?
=>In MD61 - You can set in User Parameter-Requirements type - LSF Make-to-stock production
After this u can change PV while converting Plan order to production order.
With Regards,
Ashish

MD61-PIR Entry Issue

Dear Friends,
I want enter the PIR for a Material on the same date for tw Different Production Versions in MD61 using requirement type LSF.
But in Schedule lines when I try to enter plan for two different Prod. Version on same date, it is deleting one and creating Demand for only one version in a day. and giving the Message 6P336.
But in different date for different version, it is accepting. what setting I need to do to? to meet my following requirement?
Same material is produced in the same day with two differnt versions and demand should be entered in MD61 for two different versions.
I hope u guys will help in this.
Sree

Sree,
This is a standard feature in SAP, you cannot have PIR created for multiple production versions for a period. Even if you use multiple Active PIR version for the material to create this scenario, still after MRP run SAP would create planned orders for the full quantity for the first production version.
Workaround possible: Use the Quota Arrangements option to split the demand for a day into multiple version.
1. Assign the quota usage in the material master MRP2 or Purchasing view.
2. Maintain Quota master using MEQ1.
Now based on the quota master maintained during MRP run system would split and create the planned order accordingly.
Regards,
Prasobh

CO41 and production version

I am converting planned orders to production orders using CO41. Is there a way I can get the production version field to appear on the CO41 output screen so that like other fields I can change it before pressing the 'convert' button
thanks a bunch

Dear John,
In my understanding it is not possible in standard SAP.
If you have manual selection of production version and if you have set the BOM selection method as 2 in
MRP 4 view of the material master then,
1.If you create a production order manually then the system displays the pop up to select a production
version.
2.If you are converting the planned order into a production order then it picks up the one which is
present in the planned order.So obviously if 2 production versions are there with same lot size and
validity dates,then the system picksup the first one only during MRP run.
Even if it picks up the first prod.version in planned order,but while converting click on master data and
change the production version if required.
3.Otherwise what you can do is set the production version in MD61 itself ,so that its going to be
considered during MRP run and same will be included in the planned order.
Check and revert back.
Regards
Mangalraj.S

Alternative BOM problem in MRP run

Hello Experts,
We have two BOM for one material.Now I want to use BOM-1 for MRP run & BOM-2 for subcontracting.I have maintined following settings.
1) Production version.
2) BOM explosion selection method in MRP4 -2
3) Assign PV in inforecord for subcontracting.
4) Assign PV in MD61 in schedule line .
But when I run MRP it still consider subcontracting BOM.Have I missed any setting?
Kindly guide.Thanks you.

Hi, Follow the below process,
1.Enter the BOM selection method as 2 in the MRP4 view of the material master.
2.In case if you have not assigned the production version in MD61 against the PIR's under schedule line
tab key (in the top menu click on settings and prod version ,then you can assign the prod version which
you need to pick during the MRP run),the system always picksup the first production version during
MRP run even if all the prod versions contains the same validity dates and lot sizes.
3.If you are not willing to assign the prod version in MD61 ,but the system should consider the second
prod version for MRP run means,then set the locked status for the first prod.version.
4.When run MRP via MD02 or MD50 in the simulation mode.(i.e w/o giving tick in simulation mode).
Click on Save,You will get a pop screen,
Now click on the continue icon, Then go to Plaining Results: Individual lines screen.where you will get Plan order on which when double click you will get pop screen below,where you have Planned order no,quantity,plant,storage location,and version.
Now here you can select the required version,and it will become firmed. This BOM will be used in the order now. Try it.

Early warning system - S226

Hi all
I am using the early warning system exception analysis tcode MCY1. I am using infostructure S226. I want to define requirements using plan/actual comparison method. I want to create a exception using 'withdrawl qty' and 'requirement qty'. The requirement definition asks for a planning version. where and how do I define a planning version?
thanks a lot

Hi John
Planning version , from MD61 define version try to give wat ever version you haev given in your PIR
Thanks
Bala

Alternae BOM during MRP RUN

Dear PP Gurus,
I have a finished product for which there are 2 bom, When I run MRP for this finished product , which BOM system will consider? Is there anyway by which i can deicde which BOM it should consider?
Please help.
Thanks

Dear,
If a product contains more than one alternative BOM,try to mention this by creating different prod.versions.
You can assigne the production version in MD61 against the PIR's under schedule line tab key (in the top menu click on settings and prod version ,then you can assign the prod version which you need to pick during the MRP run),
Also selection method is maintained in Material master MRP4 view.whether the BOM needs to be selected through BOM Qty. Explosion date or Production version....
Or use BAdI MD_MODIFY_PRODVERS.
Also refer this thread,
alternative BOM selection in MRP run
Regards,
R.Brahmankar

MD61 -Authorization control for Version , requirements type -reg

Hi,
We have an issue in providing MD61 -Create Planned Independent Requirements to the users
By standard authorization objects available , Plant level authorization control only is there
if we have to give authorization for many users in the same plant based on teh VERSION , REQUIREMENTS TYPE etc... is it not possible ?
can the authorizations objects be created manually for these and assign to teh concerned user's roles ?
please provide your thoughts
regards,
madhukiran.

Dear Madhu,
Authorization objects can be added for an individual T Code also in SU24.
Check with your Basis consultant,Also i think its possible to give the authorization for versions as well
as requirement type also.
Regards
Mangalraj.S

I want to make invisible mode ffield (Version) in the transaction code MD61

I want to make invisible mode ffield (Version) in the transaction code MD61.
Can anybody tell me how to do it with coding.
Thanks

Refer the thread for details about coding-
BAPI_REQUIREMENTS_CREATE
Reards,
Amit

Updating transaction MD61 using information from inbound IDOC

Is there any standard IDOC type for Planned Independent Requirement(having fields of table PBED and PBIM in its segment)?If such an IDOC type doesnt exist then i have to go for custom idoc type creation
I have an inbound IDOC having 4 fields in its segment
1.SAP Material number
2.Plant
3.Plant Quantity
4.Requirement date
Now i have to use this information in IDOC to update transaction MD61(create a planned order).
constraints:
in MD61 screen1
SCREEN 1
Material radio button is defaulted to on. This must also be set in the interface. Material number will be valued from the input file.
Plant will be valued from the input file.
Version number defaults to 00, so that value should also be used for the interface.
Planning Horizon From and To dates will be the same date and valued from the input file.
Planning Period should be set to D for Day
SCREEN 2
Material number should default from SCREEN 1 input. The interface should also do this.
MRP Area will default from the Plant on SCREEN 1 input. The interface should also do this.
Version will default from the 00 on SCREEN1. If needed on interface, also default to 00.
Version Active checkbox will be checked by default.
Base Unit of Measure will default from material master.
Only a single date column will appear which should be the date input on SCREEN 1. Value this column with the quantity from the input file.
Input fields are highlighted in screenshots below.
After input is complete, use the SAVE icon to store the data.
Kindly tell me the approach to prepare this interface?

Done,used BAPI_REQUIREMENTS_CREATE TO DO SO

MRP run with lot size as per prod. version and capacity levelling

Dear PP experts,
Hi, We are working with strategy 10. For SFG and FG produced inhouse we have created BOM and recipe with production version.
For example:
I have a production version with batch size as 100 Kg.
I load PIR for 500 Kg in MD61.
I have maintained lot size as EX in the material master but I have not defined mini. and max. lot size.
Is it possible during the MRP to consider the production version batch size if the mini. and max. lot size is not maintained in the system and create 5 Planned Order of 100 Kg each.
I know, how it can be done by using lot size in material master or by maintaining schedule lines in MD61 or by maintaining quota. But if nothing is maintained is it possible for the system to create 5 Planned orders as per the production version batch size.
Pl. check if this is possible and revert back.
Regards,
Prashant

Hi
No, system will not consider the size that maintained in the production version for the creation of planned order while the mrp run .
This lost size is used to validate the bom/ routing combiation for the particular pv of the material

Version in MD61

Similar Messages

Maybe you are looking for