Version issues/compatability

Hello, we have 2 guys using version 11.5 CR Developer, we have been using for years and not had any issues. We have 2 other guys now on the latest version of SAP CR Developer version 14.0.4.738.
Problem
When we run the reports using the newer version it returns lower figures that the older version which are correct, I have tried changing this and that including saved data and 2 separate reports for each version with the exact same setup but still the newer version are much lower than the other versions. It simply does not make sense unless the newer version is reading differently to the other version. One other thing is when I read using any viewer I get the correct data returned, so this is the SAP 14.0.4 version issue.
Can anyone advise on this one?
Thanks
S

Hi Steve,
This could an issue with the DB Client you are using, lots of changes to both CR and the DB clients between then and now.
What database are you using and how are you connecting and which DB Clients are you using?
The syntax of the SQL, case sensitivity, Null value handling are 2 I think of off the top...
Don

Similar Messages

Qmaster not using all computers in cluster, is it a version issue?

hi i'm new to cluster compressing. I just set up a cluster and a compressor batch. the batch is running fine, however it's only using two of the three computers in the cluster. I rechecked the qmaster settings on the offedning computer and they are correct. It shows up on the qadminstrator of the controlling computer as well, but always remains idle. the computer that it's not using is an older version of compressor (and presumably qmaster). is it a version issue I'm experiencing? I'd love to get this 3rd computer working on the cluster as is has the fastest processor of the bunch.

Hi Gordon,
Thanks for your response. Actually I have already asked my work buddies not to use manager for a while so I can address the problem.
BTW, I also want to know if there is a way to monitor that kind of session in SAP. I will post it in another thread.
Thanks,
Lan

Adobe Version Issue

Hi,
I am trying to use the following blog so that I can send a mail.
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417400)ID1415835150DB20085339665800400921End?blog=/pub/wlg/6676
I believe there is some restriction on ADOBE VERSION. I am not able to ascertain it.
PLease let me know is there any problem with Adobe Reader version. I am currently using Reader 8.1.5.
Regards,
Aditya Deshpande

Hi Otto,
I have implemented the same code.
When i use ADobe Acorobat 9 pro, it works there.
When I use adobe reader 8.0 or reader 8.13 or 8.1.5.
It does not work.
I have SAP FORMS as my plug ins i.e ACF.
Hence it should be reader version issue.
Since acrobat is costlier version I wanted to be sure whether or not it can used any version below.
Regards,
Aditya Deshpande
Edited by: Aditya Deshpande on Dec 9, 2009 9:59 AM

CC version issue

We are having a serious version issue with CC. There are 6 people on my team. One person signed up for CC a couple of weeks after the rest of us, and his version is 17, while ours is 16.0.4. We cannot open his files without them being corrupted. I just downloaded the latest CC updates this morning, and that didn't resolve the issue. My version still shows 16.0.4.
He is having to downsave all his files for us to open. Thoughts?
Thanks in advance for any advice.

Catmarsh which Adobe software title in specific are you referring too? Also which operating system are you using?

Safari locks up on stock streamer due to Java Version issue

I bought a MacBook for personal use when I travel. My company expressly forbids any personal use of their laptop.
When I use Safari with my wireless network at home it works fine. In this hotel I cannot access the stock streamer on TD Ameritrade when working over a wireless connection. TD Ameritrade "help" indicates a Java Version problem. I upgraded to the latest version of Java. TD still indicates a Java Version issue. This really does not make sense since the streamer works fine at home. I used my business laptop (XP with Internet Explorer) just to check the streamer and it works fine at the hotel.
I checked the Safari Plug-ins. The Java Plug-ins listed say;
Java Plug-in for Cocoa
Java Switchable Plug-in (Cocoa) - from file "JavaPluginCocoa.bundle".
Java Plug-in
Java 1.3.1 Plug-in - from file "Java Applet.plugin".
Java Plug-in (CFM)
Java 1.3.1 Plug-in (CFM) - from file "Java Applet Plugin Enabler".
I tried to download and reinstall Java 1.4.2. The system indicated there was already a newer version of Java 1.4 installed and terminated the install.
Any suggestions will be tried.
I am hoping that after all my years on PCs I will not regret trying to switch to Apple.
MacBook Mac OS X (10.4.7) Java Version 5 not indicated in plug-in wndow

Welcome to Apple Discussions and Mac Computing
Do you have J2SE 5.0 installed in your Utilities>Java folder? Given your machine is new it ought to be there. If not, go to Software Update in your System Preferences and install it.
If it is installed: inside the J2SE5.0 folder is Java Preferences.app and Java Cache Viewer. Double click the Pref. app. Upon opening, the ensuing panel indicates the "priority" for Java - mine says J2SE 5.0, then J2SE 1.4.2. If it isn't in that order, reverse the order by dragging one of them to the proper place. Select "save".
Next, clear the 1.4.2 cache file by opening Java 1.4.2 Plugin Settings.app, selecting cache, then "clear". Quit the app. and restart your computer/Safari.
Post back.
iMac G5 Rev C 20" 2.5gb RAM 250 gb HD/iBook G4 1.33 ghz 1.5gb RAM 40 gb HD Mac OS X (10.4.8) LaCie 160gb d2 HD Canon i960 printer

Cat 4500-X ISSU Compatibility Matrix

Hello,
I was able to find only this one ISSU compatibility matrix (only in the 6500 section):
http://www.cisco.com/c/en/us/support/switches/catalyst-6500-series-switches/products-release-notes-list.html
I could not find such a matrix for 4500-X.
Maybe somebody can help me?
When I look on the compatibility matrix mentioned above there is also no mention about 15.2 (2)E which should map to IOS XE 03.6.0E according this table:
Source:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/release/note/OL_32142-01.html
I would like to know from which release I can perform an ISSU to IOS XE 03.6.0E.
Thanks in advance for any help.
Marek

Hi,
Please check out the following link:
http://docwiki.cisco.com/wiki/Catalyst_4500/4900_series_ISSU_compatibility_matrix
Hope this helps.

Database Cloning/Refresh to a Later Version & Datafile Compatibility

It would be great , if someone can clarify my query on DB Cloning.
I have a source database running on 9.2.0.5 Oracle version
My Target System has got 9.2.0.7 Oracle version.
This is what I want to do :
Trash the datafiles of the Target Database (9.2.0.7)
Copy the source database online backup(9.2.0.5) to the target system(9.2.0.7)
Create controlfile(from the trace generated at source) and perform a recovery to a specific point-in-time
Open the database with resetlogsI am unable to test this out, due to resource limitations.
As there is a difference in Oracle Versions of Source & Target systems, will there be any compatibility issues for the datafiles?
Thanks in advance.

Hi Justin,
Thanks for the quick response.
Target system has already got a database running on 9.2.0.7
We will be trashing the target database files and then copy the Online backup of the Production system running on 9.2.0.5 to the target, then perform the PITR to the time specified by the business.
Production patch upgrade(to 9.2.0.7) will be done only after couple of months.
Re-installing Oracle software(9.2.0.5) & a patch upgrade at target is not feasbile in this environment.
So.. just wanted to find a work around for this.
In this case we will have to pre-pone the Production(source) Patch upgrade, so as to continue with the Refresh/Cloning activities to the other systems(of 9.2.0.7) in the landscape.
Thanks Justin.. Once again..
Don

LR5 versions, catalog compatibility and latest non-cloud version

I've been using LR3, then 4 now 5 - I was running 5.3.
However, my HDD crashed so I rebuilt my Win7 OS, reinstalled LR5, but it's now the cloud version (which I don't have a licence for). Even more frustrating (or maybe it's a blessing in disguise), my LR5 catalog is NOT compatible with LR5.7.1 ?!? It says it's too old.
I've searched, but cannot find any documentation saying there's a compatibility issue between different versions of LR and when I upgraded from 4 to 5, it managed a catalog upgrade. Now I'm doing a "minor" upgrade, it cannot read it ?
Where is there a compatibility matrix showing which catalog version can be read / upgraded by which LR versions?
Bearing all that in mind, I think I'll stick to my previous non-cloud version of LR, but my question is which version should I use and will it be compatible with my catalog backup.
Thanks in advance (and sorry for my rant )

Hi Jim,
Thanks for your reply.
I've calmed down a bit now And managed to download 5.7.1 standalone in non-cloud version. But the problem remains.
Or:
Does that mean my catalog is corrupt?

Multiple Version Issue. data not matching

Dear all,
pleas help me in this issue..
we have the Apo (DP) Cube. we are running the reports on this cube..
when we run the query we are giving the Verion ( means week) in the selections.. data is coming but.not matching with Apo..data..
we assumed that data is coming more. beacuse it might taking the data of previous year also.
so we included the Calyear and aksed user to selct both, vesrion as well as year.. because their req is for multiple version with historical data.
They want to see the data for multiple versions with historical data... even though data is not matching..
what we had done is again deleting all the data from Cube and dso an datasource , again loading... this time we asked user to run the report and match it the data is matching.. with vesrion
But when we go for historical data with mutiple version. its not matching ,
pleas help me out where to find out this probelm , what could be the cause ,.
how to chek
Awaiting your valuble fedback. its an uregnt issue.
if any thing else required pls let me know

Txs for your valuble reply..
We had checked that .
but when we unload and again loaded data this time it is matching on giving the version...
Where as in case of Multiplr versions . data is coming more.. donno wheather it is mixing up the duplicate data . or what not able to underand.
can you pls tell me steps how to analyse with your patiency...
Where and all we need to chek ....
Awaiting Your reply.

Version issue in Workflow

Hi,
I have made changes to a workflow in Development and moved it to Quality.
After transportation in quality, its keeping on generating new version number .
i got almost 20 new versions. Still it is increasing time to time.
What could be the issue ?

hi
When we tranport a req to DEV to Quality ,then new version is created in Quality .
but as you say "one req is being transported but its creating version continuously"
I thing there some problem in transportation process , ask yr Basis person.
and one thing you can check
for any two version (which is created by your request ) compare :
pftc_dis-> go to yr WF ->WF builder -> Basic data ->VersionOverview ->
compare change by , date ,time ,release of these version with yr DEV WF templet data .
the active version should be same as yr DEV WF .
perhaps you will get some clue.
thanks
kakoli

Exchange 2007 Version Issue

We are installing an Exchange 2013 Server in a small environment with an Exchange 2007 server.
When going through the Readiness Checks during the Exchange 2013 Install it fails for the following reason:
"All Exchange 2007 servers in the organization must have Exchange 2007 SP3 or later installed."
This is an issue because on SP3 has been installed on the Exchange 2007 server, but when looking at the version in EMC it shows as (8.1) which corresponds to SP1.
I checked out the following blog post, and it states to check version based on the properties of the EXSetup.exe file.
http://blogs.technet.com/b/exchange/archive/2010/03/08/3409469.aspx
When I did this, I found that the version installed is in fact:
08.03.0342.004
Which corresponds to Exchange 2007 SP3.
While most posts seem to say "It's fine, the server is updated without issue", this is a problem for me because it won't let me install Exchange 2013 in the environment.
Anyone have any ideas to how to resolve the issue with the Exchange 2007 server, or to continue the installation of Exchange 2013.
Thank you,

Hi Gabriel,
You need to have Exchange 2007 SP3 RU11 inorder to bring exchange 2013 in the environment.Only then it will allow you to install Exchange 2013.
I would suggest you to install the latest rollup Exchange 2007 SP3 RU12 and proceed with Exchange 2013 installation
link for Ex2007 Ru11 -
http://www.microsoft.com/en-us/download/details.aspx?id=41393
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you.
Regards,
Sathish
website - exchangequery.wordpress.com

Versioning issue in Oracle 10g DB

Hi there,
I have a specific issue with my DB. I will try to explain in short terms.
I exported a DB from my client with full exp, and imported it on my PC in a blank DB instance. Both database and workspace manager have the same version as my client, 10.2.0.1.0. and I have all tables that are version enabled in select * from all_wm_versioned_tables. The versioning works that I have V_C view, V_C_BASE view and V_C_LT and _AUX tables with proper columns for versioning. V_C view get's data from V_C_BASE view, where triggers are created (for insert,uptade and delete), and V_C_BASE view get's data from LT table.
The problem is, when I try to do update on V_C view, I get:
Error report:
SQL Error: ORA-01403: no data found
ORA-06512: at "SYS.LT_CTX_PKG", line 613
ORA-06512: at "OVM_UPDATE_254", line 1
ORA-04088: error during execution of trigger 'OVM_UPDATE_254'
01403. 00000 - "no data found"
*Cause:
*Action:
Similar thing happens when I try to insert something in V_C. But, if I disable mentioned trigger, I can do update, but of course, versioning doesn't work then.
Pls, do anyone have any idea what am I doing wrong here? I've searched for this error messages, and still can't resolve this. Is the problem maybe with indexes or something else? Maybe I have to do export and import differently to get this working exactly it does on my clients server, or something similar?
I also have backup files from them, maybe to do a DB restore with them...any ideas are more then appreciated.
Thanks
Have a great day,
Mustafa

Hi,
Why you are export/import the workspace manager(WMSYS user). you only need to import the user created/related schema.
if you are using datapump then you use the EXCLUDE parameter to exclude system related schemas and in Normal import you can use the fromuser/touser clause to avoid the issue.
however you can create the workspace manager user with the inbuilt script
$ORACLE_HOME/rdbms/admin/owmctab.plb
HTH

Mac OS X 10.4.11 - Safari Version Issue

Hello Everyone,
This is my first post into this forum. so let me tell you something about my profession. Basically i am an interactive developer working on HTML, CSS & javascript, AJAX with some graphic desgining on tools like photoshop and flash on windows machine.
so on the whole i am not a mac savvy guy and don't have much experience on it.
In my recent project which a marketing site, stuck with an issue related to Apple Mac machine.
Here the problem is:
when i was testing my site on that mac machine i found two browser on that mac machine both are safari but version are different.
version are:
safari version 3.1.1 & safari 2.0.4
if i test my site on 3.1.1 everything looks perfect and fine but when i test the same site on 2.0.4 version the site look weird and distorted.
below is the detail of mac machine:
Operation system : OS X 10.4.11
browser version(1) : 3.1.1
browser version(2) : 2.0.4
so my questions overhere is :
- which one the default brower for this specfic OS and which one is the latest and widely used version?
- any method to define the different css for these two different version browsers?
any help or pointer would be highly appriciable.
Thanks,
Muckoda Baron

which one the default brower for this specfic OS and which one is the latest and widely used version?
Safari 3.1.2.

Purchase Order version issue...

Hi,
We are facing one very picular issue.
Whenver an PO is getting created with reference to the Shopping Cart or through carry out sourcing or a direct PO, system is generating the version as 2.
Actually, once the SC is approve through various stages or when we are creating a PO using carry out sourcing or we are creating an puchase order directly then the version should always be zero.
Can somebody help/guide me to resolve this issue.
Thanks in advance.
Regards,
~Abey

Whenver an PO is getting created with reference to the Shopping Cart or through carry out sourcing or a direct PO, system is generating the version as 2.
Not only PO, but all business document types that are configured to have versioning turned on have the same behavior as you described, which is standard. The reason is that when PO is first created and ordered, a historical version is generated as a copy of the active document. That historical document is given version 1. The current active document would then be 2 to begin with. There has never been a version zero concept in SRM standard.

Lost file associations (Not the old version issue) Win 7 & CS5

Something corrupted my installation of CS5 a month or so ago after it had been working correctly and I lost all the image file associations. Photoshop worked fine but only if I directly opened files from within. Also all the other image packages were missing from the file association list in the Windows 7 file associations tool, not just Photoshop. Using the Windows tool to find the programmes dot exe file and create an association also locked up at the select the right package phase.
I have fixed this now and my reason for posting is that several previously suggested fixes in both the MS Windows fora and elsewhere on these Adobe forums were either very complicated requiring direct registry editing or didn't work. It has taken me a while to find a work-around that worked, hence this post.
1) Firstly - as is stated elesewhere the obvious answer of simply reinstalling Photoshop over the existing copy doesn't work! Unfortunately it was a while before I found this out, with several time wasting retries of this as a fix attempt.
2) Not saying this is guaranteed to work in every case but I ran a 3rd party free Registry Cleaner tool, this appears to have fixed the bug in the registry allowing the Windows 7 File Associations tool to work properly again. Once that was fixed linking up each graphic type was simple.
Reason for posting is I wasted lots of time thinking the issue must have been a legacy from my earlier instal of a trial version of Master Suite or the older Photoshop 7 being replaced even though my CS5 edition had been working Ok for some time. because this is what is given as the usual cause. However I think in my case it was after loading and then deleting other graphics software, possibly Real Player, which had grabbed the associations and corruped registry settings somehow at uninstall. It appears registry cleaner restored the corruption and allowed the standard Win 7 tool to work again.
Hope this can help someone else.

First, let me say thanks to John for posting his experience here. I think that Adobe does a poor job of managing file associations, given that we do hear of a lot of folks who see them get fouled up due to doing normal things like uninstalling earlier versions.
I'd like to ask, though: Did you try using the Preferences - File Type Associations dialog in Bridge?
Curt Y wrote:
Not being a computer "geek" myself I personally can not say it is a bad thing to try
A comment on "registry cleaners" in general:
I am a career computer "geek", and yes, Curt's right: Registry cleaners in general are a terrible idea. There are a few that encompass some valuable functionality such as deletion of old files from TEMP folders, but that's something one can do on one's own as well.
It's simply impossible for the programmer of a piece of software to know what information can be safely deleted from YOUR file system or YOUR Windows registry, which is a database.
Nor is it necessary to "clean" a registry regularly, as some say, to keep a system working well. That's hype, propagated by the registry cleaner makers. I use a system every day that's on the same installation of Windows 7 that first went in at the end of 2009. It's stable and fast as ever. I've even done several hardware upgrades and restored the same OS setup using system image backups just to keep the same fully configured, perfectly working system.
Ever hear people claim they have to reinstall Windows every so often? One of the reasons could well be that they've used a registry cleaner.
-Noel

Version issues/compatability

Similar Messages

Maybe you are looking for