Version 'M' of chain was saved without checking

Hi experts,
I have a process chain.A error appears in the log:
Job started
Step 001 started (program RSPROCESS, variant &0000000078212, user ID BWREMOTE)
Version 'M' of chain R3_SD_ABC01 was saved without checking
Version 'A' of chain R3_SD_ABC01 was saved without checking
The Chain Was Removed From Scheduling
I check the process chain in the RSPC, and the result is : Chain Is OK.
I activate it.
I save it, and an adversitment appears:
Version 'M' of chain R3_SD_ABC01 was saved without checking
Is there some one who know it?
thanks a lot!

Hi,
Actually that process chain has been removed from the scheduled.
Goto Change mode.
1. Check (Check View) the process chain once.
2. Save and Activate the Process Chain.
3. Then Schedule (Activate and Schedule) the Process Chain (based on your requirement).
Hope you understand.
Veerendra.
Edited by: denduluri veerendra kumar on Jul 9, 2009 10:00 AM

Similar Messages

Version 'M' of chain Z_E_PMI_SCM_DP_HR_001_SCH was saved without checking.

Hi Experts,
when I am transporting process chains from dev to quality it is giving error as " 001 Method Execution                         24.05.2010 23:13:59    (8) Ended with errors ".
Total error message is giving as below.
Start of the after-import method RS_RSPC_AFTER_IMPORT for object type(s) RS
Version 'M' of chain Z_E_PMI_SCM_DP_2F_001_SCH was saved without checking
Results of check for process     in chain :
Version 'M' of chain Z_E_PMI_SCM_DP_2I_001_SCH was saved without checking
Results of check for process     in chain :
Version 'M' of chain Z_E_PMI_SCM_DP_7A_001_SCH was saved without checking
Results of check for process     in chain :
Version 'M' of chain Z_E_PMI_SCM_DP_AL_001_SCH was saved without checking
Results of check for process     in chain :
It is saying as Version 'M' of chain Z_E_PMI_SCM_DP_2F_001_SCH was saved without checking this message was coming what is the reson behind this . If any body suggest it will be great help to me.

Did you check whether process chain has moved to quality?
If yes then activate the process chain in quality using 'RSPC_CHAIN_ACTIVATE_REMOTE' function module.
If not then goto RSPC,
-Check the process chain "Check View"
- Save and activate the process chain
Then re-transport.

I want to open a Illustrator file in Illustrator CS4 but i am getting this message "This is an adobe illustrator file that was saved without PDF content..."

I want to open a Illustrator file in Illustrator CS4 but i am getting this message "This is an adobe illustrator file that was saved without PDF content..." I tried the save as option with "Create PDF compatible file" option but still same message is showing. PLEASE HELP.
Thanks in advance.

I have uploaded the files to my dropbox - Dropbox - AI
I would really appreciate it if anyone is willing to down-save the version of these files to Illustrator CS4 and send it to me.
thanks

This is an Adobe Illustrator File that was saved without PDF Content.

Hi everybody,
I'm working in illustrator CS6 and I am trying to save my file as PDF. However I can't seem to do it.
I save the file as an ai. file and click the "Create PDF Compatible File" option. Then when I click >save as >and opt for the PDF version and click save the PDF file comes up with no images and just the .....
This is an Adobe® Illustrator® File that was
saved without PDF Content.
To Place or open this le in other
applications, it should be re-saved from
Adobe Illustrator with the "Create PDF
Compatible File" option turned on. This
option is in the Illustrator Native Format
Options dialog box, which appears when
saving an Adobe Illustrator le using the
Save As command.
This hasn't happened before when saving to PDF previously. If you could offer any help or advice I would much appreciate it.
Cheers
R

Rosie,
This is seriously weird: even if you have Create PDF Compatible File unticked you should be able to Save As PDF.
There may be something corrupt, so the list may be worth trying:
The following is a general list of things you may try when the issue is not in a specific file, and when it is not caused by issues with opening a file from external media, see below. You may have tried/done some of them already; 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save current artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to at least 5 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible), for CS3 - CC you may find the folder here:
https://helpx.adobe.com/illustrator/kb/preference-file-location-illustrator.html
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall (ticking the box to delete the preferences), run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

When logging onto firefox I get mikrotic hotspot login, is this part of firefox? My login to my server was saved without my requesting it on firefox-why?

I'm new to firefox, I realized one day when opening firefox from desktop on my laptop, my server automatically logged me on, and a quick popup read, "mikrotic hotspot>login". Is this part of firefox? If I type in firefox from IE I have to fill in my server user and password. As I don't like to save my password, username this is a problem.

Firefox doesn't automatically save usernames / passwords, it always asks if the user wants that information to be saved, <br />
https://support.mozilla.com/en-US/kb/Remembering%20passwords
Just delete that username /password.

Process chain was not getting trigerred

Hi Experts,
Chain "Weekly MSA Loads - Full Process" is not getting triggerred.
This chain is set to run after completion of ABAP program.
On 16th Jan, ABAP ptogram was successfully completed.Then ""Weekly MSA Loads - Full Process"" chain status was set to running (yellow). But no job was created. It got hung for more than a hour.
So we tried to trigger that chain with immedaiate option. We got an option "Server for scheduling". We didnt provide any server name. Then pressed Ok button. From then onwards, server went to refreshing state, but no job was created(BI_PROCESS_TRIGGER) and chain is not at all getting trigered.
We got the follwwing messages:
01/24/2009     06:49:48     Job started     S     00     516
01/24/2009     06:49:48     Step 001 started (program RSPROCESS, variant &0000000655878, user ID BWREMOTE)     S     00     550
01/24/2009     06:50:05     Communication buffer deleted from previous run 4CIS92GCZ3HQ5WVXKADF85TFQ (status X)     I     RSPC     87
01/24/2009     06:50:05     Version 'M' of chain ZPC_MSA_FULL_PROCESS was saved without checking     S     RSPC     19
01/24/2009     06:50:05     Version 'A' of chain ZPC_MSA_FULL_PROCESS was saved without checking     S     RSPC     19
So we cancelled that step (STOP transaction). From that day onwards this chain is not all getting trigerred in any way. We have checked the status of last log in RSPROCESSLOG table, its status is 'X'.
Please let us know to trigger this chain.

Hi........
U told a program gives trigger to this Chain.............that means the Process chain is event based..........just right click on the Start process >> Change Selections >> Click on After event.......just cross check.......
Now copy the event from there..........Just to cross check that whether this event is a part of any Event collector or not.............this may be one of the possibilities............bcoz........if this Event is a part of an event collector..........then until all events get regisretered..........this chain will not trigger........So......Go to SE16 >> table name RSEVENTHEAD >> there in the EVENT field give the event name >> execute............if it is a part of a event collector..............Copy the event collector name from there........
then go to RSA1OLD(if u r in BI 7.0 .....otherwise RSA1)............in the top TOOLS tab >> Event collector >> Press F4 in the Event Chain(Name) field........search for the event collector name here...............now check whether all the events got registered or not...........
Now look..........BI_PROCESS_TRIGGER is the trigger job............after completion of this job only the chain will trigger......How u checked that the job was not started...........in SM37?..........look if so ..then there will be many BI_PROCESS_TRIGGER jobs............it is quite difficult ti identify the right job..........So the best way is.............right click on the Start process >> Display messages >> BacKg tab >> Click on Batch Monitor.................there u will be able to find the BI_PROCESS_TRIGGER which is going to trigger that particular chain..............u r saying the job did'nt started.............was the Start process in release state............this may happen.............if load is huge at that time in the system............I mean if many jobs trigger at a time..........there will be no free work process........
Sometimes the chain may start when the loads will reduce.............otherwise u should contact the basis people................
Anyways............u trigger the JOb manually right.........here I want to tell u one thing..............never Scedule a time based or Event based chain by right clicking on the Start process........and from there Change selection..............I mean to say never change the Start variant..............What u should always do...............go to the Planning mode of the chain.......Right click on the stsrt process >> Display scheduled Jobs >> Take one Released job..........in the top Job tab >> Repeat scheduling >> Immedite >> Uncheck the periodic job Check box >> Check and save.........
If u do in this way.............the original settings of the chain will never change............what I guess .........that the Event is removed fro the Settings of the Start Variant..........again u hav to schedule the Chain.......
Hope this helps.........
Regards,
Debjani......

"This is an Adobe Illustrator file that was save without PDf content."

I have a client that has been working on a file in AI CS, never left his machine, but when he went to open it today he gets a message that says this file "was generated by a newer version of Illustrator. Would you like to import this file? Some data loss may occur".
And when we click the "Import" button, we then get:
"This is an Adobe® Illustrator® file that was saved without PDF content. To place or open this file in other applications, it should be re-saved from Adobe Illustrator with the "Create PDF Compatible File" options turned on. This option is in the Illustrator Native Format Options dialog box, which appears when saving an Adobe Illustrator file using the Save As command."
However, even though this was created in AI CS, all other machine and all other versions of AI (even CS3, 3.3, 2, etc..) we get the same exact error message. How it can be newer than CS 3.3 when it was created in CS is strange to begin with.
I assume this is some sort of corruption, but was wondering if there were any cures. It seems our backups have backed up this file in it's current state (corrupt), which is a huge issue at this point.
Thank you very much for any help!

I have sometimes had this trouble since I updated Acrobat.
"This is an Adobe® Illustrator® file that was saved without PDF content ..."
Not sure what's wrong - it seems to happen even though the Illy file is saved with PDF content and everything embedded.
Another thing: When viewing pdfs under Advanced>Print Production>Output Preview I repeatedly get an RGB simulation preview even though I know that the file is CMYK. So I have to choose a CMYK simulation preview and then things look o.k.
Is there any way to stop the RGB preview coming up? I note that Convert Colours messes things up completely, so it's only the preview that's wrong.
Any ideas, Wade?

"The project was saved in a newer version of premiere pro and cannot be opened in this version." - Except it wasn't!

Last night I saved a project I've been working on for a couple of days. It's been fine all along. Today, when I went to open it, it's no longer listed in the recently opened files on startup and i get this message:
"The project was saved in a newer version of premiere pro and cannot be opened in this version."
Except it wasn't! I use Premiere CC and it's been fine all along. I can no longer open it at all...
Any thoughts? Very frustrating!

One more item. In using PP CC2014 for the first time with this project, I have run into multiple issues making this project very frustrating. When adding a sequence to the master sequence, I have to render the audio each time in order to see all of the audio waves. You have to keep doing this over and over, even though you've already rendered a sequence already.
I am getting error messages when rendering the project saying there are issues compiling the movie. Getting same type error message if I try to export. I narrowed it down to two sequences keeping the program from rendering without the error messages. They each had a tiff file. I deleted them and they rendered. Not sure what this issue was with these particular files since I have other tiff files in the project. Once the rendering of all sequences was done, all the individual sequences were closed and the master was the only one open. I didn't close them. So now to edit any of the sequences I have to go back and open them.
The only thing this project has in it are titles created in PP, a few graphics, mostly tiff tiles and some jpeg and the dissolve effect. That's it. Seems like they should have done more with this version before putting it out there. Maybe that's why there are two separate applications for PP? Who knows. I will be uninstalling PP CC2014 when this project is complete.

I am in the middle of a job using CS 6, but at the same time opening the Creative Suite apps. I created an InDesign file in CS 6, saved it, and now I can't open it. I'm getting this message: Cannot open file because it was saved with a newer version of A

I am in the middle of a job using CS 6, but at the same time opening the Creative Suite apps. I created an InDesign file in CS 6, saved it, and now I can't open it. I'm getting this message: Cannot open file because it was saved with a newer version of Adobe InDesign CC (10.1). You must use that version or later to open the file." AARRGGHH! So how do I access the file?

Sounds like you opened and saved it in CC, so now you need to go back to CC and either complete the project there, or export to IDML to take it back into CS6.

I have two versions of Pr, one is the latest 2014 and when trying to open a Pr2014 session, I get an error message saying the project was saved in a newer version and cannot be opened. Help

I have two versions of Pr, one is the latest 2014 and when trying to open a Pr2014 session, I get an error message saying the project was saved in a newer version and cannot be opened. Could there be an issue with an older Pr application on the computer? Please help!

You need to be very careful which project you open in which version.
For 2014 make sure its on 2014.1 build 81.

Cannot open "filename" because it was saved with a newer version of Adobe InDesign CC (10.0).

I updated my whole cloud last week. Now I can't open a InDesign document saved just the day before. I get the error message:
Cannot open “filename” because it was saved with a newer version of Adobe InDesign CC (10.0).
Cannot open “filename” because it was saved with a newer version of Adobe InDesign CC (10.0). You must use that version or later to open the file. To then enable it to be opened in this version, choose save as InDesign CS4 or later, or export to IDML.
This is a document that I created in InDesign CC just last week.

Hi Robert,
To open an INDD file in the older version (CS4-CC), you need to save it as an IDML. For CS3 & older versions, save it as an INX.
Thanks

The project was saved in a newer version of Premiere Pro and cannot be opened in this version

I edited a project on CC on one computer and saved it on my external. My friend took the same project to edit it on her computer under her own name and licence. Both of us recently upgraded to CC. But the same project that worked a few hours back on Premiere Pro CC, does not work now also on Premiere Pro CC and I received a message saying: The project was saved in a newer version of premiere pro and cannot be opened in this version." Can you please help us.?
Message was edited by: Kevin Monahan
Reason: Your title was too long.

Hi alexxxkid,
You should be able to import the xml into an earlier version.
Backward compatibility has never been there with Premiere and it is always recommended not to update in the middle of a project.
As far as the crash is concerned, please tell me more about it so that i can help you to the best of my knowledge.
Thanks,
Rameez

Cant open project says it was saved in older version

Tried to open my project that I had just worked on 30 minutes before and it says that it was saved in an older version of imovie hd. I only have one version so im unsure what happend. It will not open if I hit ok, it starts loading and then gets hung up. After a couple minutes, the imovie says it is not responding. Large project due tomorrow, very stressed. Any help would be greatly appreciated.

If you don't have too many ID files to convert, I would be happy to save them out for you at no expense.
If you would like to do this, you would need to upload to dropbox.com or wikisend.com or the like and send me a Private Message witha download link. I would then upload them to my dropbox folder and send you the download link. If you just want to discuss it, send me a PM.
Mike

Have got a Windows Vista basic and had run a a trial version of LR4 on it - just purchased an LR5 without checking out the complete system requirements. Can I get a complete download of LR4 so that the money I've spent is not wasted. I am not interested i

Have got a Windows Vista basic and had run a a trial version of LR4 on it - just purchased an LR5 without checking out the complete system requirements. Can I get a complete download of LR4 so that the money I've spent is not wasted. I am not interested in upgrading to Windows 7 currently.

There are still retail packs of LR 4 to be found out there - for example, on EBay. It's just important to be careful whether it's a full version, an upgrade, or a student + teacher version. And to be certain it's genuine, and has a serial number which has never been activated before. The serial number that you get with that, should work with any 4.x version of LR, on either MacOS or Windows. And it will almost certainly be heavily discounted compared with the previous price direct from Adobe.
Of course the other way is to upgrade to Windows 7 SP1, which should also be available discounted, and thus eke out the life of an older PC (I personally would not go to Win8 in such a case). Maybe pick up some RAM also, if that's a problem, provided you can do so cheaply (since that will be simply thrown away in due course, when you get a newer PC),
Using LR4 instead of LR5 you do miss out on a few nice features, as well as potentially the Raw support and lens profiles for more recent camera equipment.
LR 4 is obsolete as far as Adobe is concerned. They will not sell a Serial Number for it.

When I try to open IN AI or Ps files appear a window:" impossible to open ...namefile.indd because it was saved in a plus recent version of adobe indesign (CS7.2)". But I don't have do that?

When I try to open IN AI or Ps files appear a window:" impossible to open ...namefile.indd because it was saved in a plus recent version of adobe indesign (CS7.2)". But I don't have do that? please help me, thank you. giampiero

Hi,
You cannot open the file created/opened in the latest version of InDesign into older version of InDesign directly.
You will have to export the file, File >Export , into IDML from the newer version to make it compatible with older version.
{moved to InDesign forum}
Thanks,
Manish Sharma

Version 'M' of chain was saved without checking

Similar Messages

Maybe you are looking for