Version 'M' of chain Z_E_PMI_SCM_DP_HR_001_SCH was saved without checking.

Hi Experts,
when I am transporting process chains from dev to quality it is giving error as " 001 Method Execution                         24.05.2010 23:13:59    (8) Ended with errors ".
Total error message is giving as below.
Start of the after-import method RS_RSPC_AFTER_IMPORT for object type(s) RS
Version 'M' of chain Z_E_PMI_SCM_DP_2F_001_SCH was saved without checking
Results of check for process     in chain :
Version 'M' of chain Z_E_PMI_SCM_DP_2I_001_SCH was saved without checking
Results of check for process     in chain :
Version 'M' of chain Z_E_PMI_SCM_DP_7A_001_SCH was saved without checking
Results of check for process     in chain :
Version 'M' of chain Z_E_PMI_SCM_DP_AL_001_SCH was saved without checking
Results of check for process     in chain :
It is saying as Version 'M' of chain Z_E_PMI_SCM_DP_2F_001_SCH was saved without checking this message was coming what is the reson behind this . If any body suggest it will be great help to me.

Did you check whether process chain has moved to quality?
If yes then activate the process chain in quality using 'RSPC_CHAIN_ACTIVATE_REMOTE' function module.
If not then goto RSPC,
-Check the process chain "Check View"
- Save and activate the process chain
Then re-transport.

Similar Messages

Version 'M' of chain was saved without checking

Hi experts,
I have a process chain.A error appears in the log:
Job started
Step 001 started (program RSPROCESS, variant &0000000078212, user ID BWREMOTE)
Version 'M' of chain R3_SD_ABC01 was saved without checking
Version 'A' of chain R3_SD_ABC01 was saved without checking
The Chain Was Removed From Scheduling
I check the process chain in the RSPC, and the result is : Chain Is OK.
I activate it.
I save it, and an adversitment appears:
Version 'M' of chain R3_SD_ABC01 was saved without checking
Is there some one who know it?
thanks a lot!

Hi,
Actually that process chain has been removed from the scheduled.
Goto Change mode.
1. Check (Check View) the process chain once.
2. Save and Activate the Process Chain.
3. Then Schedule (Activate and Schedule) the Process Chain (based on your requirement).
Hope you understand.
Veerendra.
Edited by: denduluri veerendra kumar on Jul 9, 2009 10:00 AM

I want to open a Illustrator file in Illustrator CS4 but i am getting this message "This is an adobe illustrator file that was saved without PDF content..."

I want to open a Illustrator file in Illustrator CS4 but i am getting this message "This is an adobe illustrator file that was saved without PDF content..." I tried the save as option with "Create PDF compatible file" option but still same message is showing. PLEASE HELP.
Thanks in advance.

I have uploaded the files to my dropbox - Dropbox - AI
I would really appreciate it if anyone is willing to down-save the version of these files to Illustrator CS4 and send it to me.
thanks

This is an Adobe Illustrator File that was saved without PDF Content.

Hi everybody,
I'm working in illustrator CS6 and I am trying to save my file as PDF. However I can't seem to do it.
I save the file as an ai. file and click the "Create PDF Compatible File" option. Then when I click >save as >and opt for the PDF version and click save the PDF file comes up with no images and just the .....
This is an Adobe® Illustrator® File that was
saved without PDF Content.
To Place or open this le in other
applications, it should be re-saved from
Adobe Illustrator with the "Create PDF
Compatible File" option turned on. This
option is in the Illustrator Native Format
Options dialog box, which appears when
saving an Adobe Illustrator le using the
Save As command.
This hasn't happened before when saving to PDF previously. If you could offer any help or advice I would much appreciate it.
Cheers
R

Rosie,
This is seriously weird: even if you have Create PDF Compatible File unticked you should be able to Save As PDF.
There may be something corrupt, so the list may be worth trying:
The following is a general list of things you may try when the issue is not in a specific file, and when it is not caused by issues with opening a file from external media, see below. You may have tried/done some of them already; 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save current artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to at least 5 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible), for CS3 - CC you may find the folder here:
https://helpx.adobe.com/illustrator/kb/preference-file-location-illustrator.html
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall (ticking the box to delete the preferences), run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

When logging onto firefox I get mikrotic hotspot login, is this part of firefox? My login to my server was saved without my requesting it on firefox-why?

I'm new to firefox, I realized one day when opening firefox from desktop on my laptop, my server automatically logged me on, and a quick popup read, "mikrotic hotspot>login". Is this part of firefox? If I type in firefox from IE I have to fill in my server user and password. As I don't like to save my password, username this is a problem.

Firefox doesn't automatically save usernames / passwords, it always asks if the user wants that information to be saved, <br />
https://support.mozilla.com/en-US/kb/Remembering%20passwords
Just delete that username /password.

"This is an Adobe Illustrator file that was save without PDf content."

I have a client that has been working on a file in AI CS, never left his machine, but when he went to open it today he gets a message that says this file "was generated by a newer version of Illustrator. Would you like to import this file? Some data loss may occur".
And when we click the "Import" button, we then get:
"This is an Adobe® Illustrator® file that was saved without PDF content. To place or open this file in other applications, it should be re-saved from Adobe Illustrator with the "Create PDF Compatible File" options turned on. This option is in the Illustrator Native Format Options dialog box, which appears when saving an Adobe Illustrator file using the Save As command."
However, even though this was created in AI CS, all other machine and all other versions of AI (even CS3, 3.3, 2, etc..) we get the same exact error message. How it can be newer than CS 3.3 when it was created in CS is strange to begin with.
I assume this is some sort of corruption, but was wondering if there were any cures. It seems our backups have backed up this file in it's current state (corrupt), which is a huge issue at this point.
Thank you very much for any help!

I have sometimes had this trouble since I updated Acrobat.
"This is an Adobe® Illustrator® file that was saved without PDF content ..."
Not sure what's wrong - it seems to happen even though the Illy file is saved with PDF content and everything embedded.
Another thing: When viewing pdfs under Advanced>Print Production>Output Preview I repeatedly get an RGB simulation preview even though I know that the file is CMYK. So I have to choose a CMYK simulation preview and then things look o.k.
Is there any way to stop the RGB preview coming up? I note that Convert Colours messes things up completely, so it's only the preview that's wrong.
Any ideas, Wade?

"The project was saved in a newer version of premiere pro and cannot be opened in this version." - Except it wasn't!

Last night I saved a project I've been working on for a couple of days. It's been fine all along. Today, when I went to open it, it's no longer listed in the recently opened files on startup and i get this message:
"The project was saved in a newer version of premiere pro and cannot be opened in this version."
Except it wasn't! I use Premiere CC and it's been fine all along. I can no longer open it at all...
Any thoughts? Very frustrating!

One more item. In using PP CC2014 for the first time with this project, I have run into multiple issues making this project very frustrating. When adding a sequence to the master sequence, I have to render the audio each time in order to see all of the audio waves. You have to keep doing this over and over, even though you've already rendered a sequence already.
I am getting error messages when rendering the project saying there are issues compiling the movie. Getting same type error message if I try to export. I narrowed it down to two sequences keeping the program from rendering without the error messages. They each had a tiff file. I deleted them and they rendered. Not sure what this issue was with these particular files since I have other tiff files in the project. Once the rendering of all sequences was done, all the individual sequences were closed and the master was the only one open. I didn't close them. So now to edit any of the sequences I have to go back and open them.
The only thing this project has in it are titles created in PP, a few graphics, mostly tiff tiles and some jpeg and the dissolve effect. That's it. Seems like they should have done more with this version before putting it out there. Maybe that's why there are two separate applications for PP? Who knows. I will be uninstalling PP CC2014 when this project is complete.

I am in the middle of a job using CS 6, but at the same time opening the Creative Suite apps. I created an InDesign file in CS 6, saved it, and now I can't open it. I'm getting this message: Cannot open file because it was saved with a newer version of A

I am in the middle of a job using CS 6, but at the same time opening the Creative Suite apps. I created an InDesign file in CS 6, saved it, and now I can't open it. I'm getting this message: Cannot open file because it was saved with a newer version of Adobe InDesign CC (10.1). You must use that version or later to open the file." AARRGGHH! So how do I access the file?

Sounds like you opened and saved it in CC, so now you need to go back to CC and either complete the project there, or export to IDML to take it back into CS6.

I have two versions of Pr, one is the latest 2014 and when trying to open a Pr2014 session, I get an error message saying the project was saved in a newer version and cannot be opened. Help

I have two versions of Pr, one is the latest 2014 and when trying to open a Pr2014 session, I get an error message saying the project was saved in a newer version and cannot be opened. Could there be an issue with an older Pr application on the computer? Please help!

You need to be very careful which project you open in which version.
For 2014 make sure its on 2014.1 build 81.

I have PSE13 on my system. It was functioning properly and now I get these messages when I go to print: "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available. You need to c

I have PSE13 on my system, Windows 8.1, 64-bit. It was functioning properly after installation and now I get these messages when I go to print: "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available. You need to check your printer settings before printing." and then this statement: "Default printer could not be opened." I have reloaded drivers for both printers and made any upgrades possible. It was working fine before and now all of a sudden, nothing. Would prefer to have old PSE v.12 back, it worked with no problems.

See this thread
My Photoshop Elements 13 doesn't recognize my Canon PRO-10 printer. I've tried EVERYTHING. Reinstalled all my software, didn't fix anything. Can anyone help?

Cannot open "filename" because it was saved with a newer version of Adobe InDesign CC (10.0).

I updated my whole cloud last week. Now I can't open a InDesign document saved just the day before. I get the error message:
Cannot open “filename” because it was saved with a newer version of Adobe InDesign CC (10.0).
Cannot open “filename” because it was saved with a newer version of Adobe InDesign CC (10.0). You must use that version or later to open the file. To then enable it to be opened in this version, choose save as InDesign CS4 or later, or export to IDML.
This is a document that I created in InDesign CC just last week.

Hi Robert,
To open an INDD file in the older version (CS4-CC), you need to save it as an IDML. For CS3 & older versions, save it as an INX.
Thanks

The project was saved in a newer version of Premiere Pro and cannot be opened in this version

I edited a project on CC on one computer and saved it on my external. My friend took the same project to edit it on her computer under her own name and licence. Both of us recently upgraded to CC. But the same project that worked a few hours back on Premiere Pro CC, does not work now also on Premiere Pro CC and I received a message saying: The project was saved in a newer version of premiere pro and cannot be opened in this version." Can you please help us.?
Message was edited by: Kevin Monahan
Reason: Your title was too long.

Hi alexxxkid,
You should be able to import the xml into an earlier version.
Backward compatibility has never been there with Premiere and it is always recommended not to update in the middle of a project.
As far as the crash is concerned, please tell me more about it so that i can help you to the best of my knowledge.
Thanks,
Rameez

Cant open project says it was saved in older version

Tried to open my project that I had just worked on 30 minutes before and it says that it was saved in an older version of imovie hd. I only have one version so im unsure what happend. It will not open if I hit ok, it starts loading and then gets hung up. After a couple minutes, the imovie says it is not responding. Large project due tomorrow, very stressed. Any help would be greatly appreciated.

If you don't have too many ID files to convert, I would be happy to save them out for you at no expense.
If you would like to do this, you would need to upload to dropbox.com or wikisend.com or the like and send me a Private Message witha download link. I would then upload them to my dropbox folder and send you the download link. If you just want to discuss it, send me a PM.
Mike

I made a project on my PC computer, saving it as a tif. I then took it to the Art Institute, editing it on their Apple I wish to tweak it at home but now Ps claims that it is not compatible with this cc version of Ps, where it was originally created! HEL

I made a project on my PC computer, saving it as a tif. I then took it to the Art Institute, editing it on their Apple I wish to tweak it at home but now Ps claims that it is not compatible with this cc version of Ps, where it was originally created! HELP!!!

The files are the same, regardless of OS version.
Most likely your file was corrupted when you transferred it.

When I try to open IN AI or Ps files appear a window:" impossible to open ...namefile.indd because it was saved in a plus recent version of adobe indesign (CS7.2)". But I don't have do that?

When I try to open IN AI or Ps files appear a window:" impossible to open ...namefile.indd because it was saved in a plus recent version of adobe indesign (CS7.2)". But I don't have do that? please help me, thank you. giampiero

Hi,
You cannot open the file created/opened in the latest version of InDesign into older version of InDesign directly.
You will have to export the file, File >Export , into IDML from the newer version to make it compatible with older version.
{moved to InDesign forum}
Thanks,
Manish Sharma

Version 'M' of chain Z_E_PMI_SCM_DP_HR_001_SCH was saved without checking.

Similar Messages

Maybe you are looking for