Version Management for Scheduling Agreement

Hi Experts,
We have activated Version Management for Scheduling Agreement - LP. When we create a Scheduling Agreement, it is generating zero version but 'Net Order Value' is showing as zero in versions tab. We have also addressed fields 'NETPR' and 'NETWR' for document type - LP, in Set up Change displays.
Can any one please suggest a solution for this.
Thanks in advance.
Regards,
Sree

Hi Experts,
Any advise on this isuue?
Regards,
Sree

Similar Messages

Version management for external purchasing

Hi.
We activated the version management for scheduling agreement. But the problem is when we save the document it took the netpr ( Value) Zero. and also when we create new version i.e ammedment of price the it create one new version with zero value,
Can any budy suggest me why it took the zero value?
Thanks
Prashant

Got it

Inbound Delivery For Scheduling Agreement Lines using LSMW

Hi,
We need to create inbound deliveries for scheduling agreements. Our scheduling Agreements are too big with 200 lines. But the vendor used to send only few discrete lines in his ASN. Is it possible to create inbound deliveries for the Scheduling agreement using LSMW? Is there any standard BAPI or IDOC available to handle this in LSMW? Has anyone done this before?
Our requirement is as follows.
1. Create Inbound Delivery for few lines of the Scheduling Agreement
2. The delivery quantity of the inbound delivery will be a partial quantity of the Scheduling Agreement
3. Materials are batch managed and the batch number for each inbound delivery item need to be captured.
4. Vendor's ASN Number and its item number need to be captured at inbound delivery header and item level respectively.
Note: Delivery Schedule of the Scheduling Agreement is not used in the above scenario.
If you have any input, it will be really appreciated.
Regards,
SP0526

Hi,
You can give your scheduling agreement number in the field Purchase Order.
If you want select from the list, you can click on PO tree (just under create inbound delivery). There selet document category as "L". You will get the scheduling agreement list.
Regards,
Prabu

Foreign Trade - Legal Control for scheduling agreements

We are on version 4.6C and I am setting up the legal control for my company. It seems to work quite well for sales orders but then when I went in to configure scheduling agreements it errors and tells me you cannot do legal control for document type "E" which are typically scheduling agreements.
I cannot find any documentation on this. Does anyone know why legal control does not work for scheduling agreements and/or is this functionality available in the Global Trade Services module??
Thanks in advance for any and all help!!
Debbie

Jean,
I have done a Foreign trade implementation.
The core team of the client are FT experts and they would tell you about the legal requirements. Your job is to map them in SAP FT.
In this process you would gain Knowledge about Foreign trade regulations of that country. Remember its country specific.
The ECCN's are provided by the client. Info abt the same is extensivley available on the NET.
You have to get the list of all the mtrls which fall under the controlled cantegory of the respective commerce ministry and then start the config setting these mtrls as relevant for FT checks.
Thanks
Vishal

MRP To Generate SCHEDULE LINES for Scheduling Agreement

Hi
I have followed the below steps but still the Schedule lines is not generated for scheduling agreement.
1Maintain MRP views 1,2,3,4 for the material in material mste.(MM01)
2. Maintain Purchase Info Record for the vendor plant & material combination.(ME11)
3. Create Scheduling agreement using ME31L
4. Maintain source list for the material & the scheduling agreement # and Line item set the MRP relevant indicator 2 (Necessary ?) ME01
During Run MRP for the material.the below details entered///
Processing key NETCH Net Change in Total Horizon
Create purchase req. 1 Purchase requisitions in opening period
Schedule lines 3 Schedule lines
Create MRP list 1 MRP list
Planning mode 1 Determination of Basic Dates for Planned
Run MDBT or MD02 but still doesn't create the schedule lines......Anything else missing.
MRP1:
MRP Procedure: PD
MRP Group: 0000 (External Procurement only)
Lot Size: EX (Lot For Lot)
MRP2:
Procurement Type: F
Sched Margin Key: 000
MRP3:
Avilablity chec: 02 (Individual requirement)
MRP: 4
Nil

Raj,
Source List a Mandatory for Scheduling Agreement, if you want to create automatic Scheduling line.
Plz use (2) in MRP RELEVENT tab in ME01 (Source List).
rest of the thing is ok, make sure a material master(MRP 2 VIEW) in that view you have to give a planed delivery days. it is must.
HOPE IT WILL WORK
Regards:
Poision

Exit for role determination via exit for scheduling agreement and contract?

Hi..
I have a requirement to fetch the agents in run-time for PO,PR,SCHEDULE AGREEMENT, CONTRACT..
For PO i am using EXIT : - M06E0005
For PR release i am using EXIT :- M06B0001
By using above 2 exits i am getting the agents at run-time...
Same way i need the EXIT for SCHEDULE AGREEMENT and CONTRACT..
if there is any EXIT for this please share with me..
Regards,
Imtiaz Khan

Hi Imtiaz,
Ideally you should have your agent determination logic in workflow itself instead of determinining them in EXIT.
Can you tell me why you are determining agents in exit and how you are making use of it ?
Also let us know how your workflows are getting trigger for all these documents.
Regards,
Ibrahim

Delivery Schedule for Scheduling Agreement

Hi Gurus,
Can I do GR for scheduling agreement(with delivery schedule) if the GR is earlier than delivery date? What should I do to be able to do so?
Thank you very much

Hi
'Propose all Items" is ticked so that MIGO proposes all the items irrespective of the delivery date and quantity. This means that even if the delivery date has not yet been reached or the complete qty has been received, the system will still allow you to do the GR.
Hope this clarifies.
Thanks

Schedule lines for schedule agreement

Hi,
I need get all schedule lines for schedule agreement (all schedule lines = all visible in tab analysis u2013 all lines for all forecast dlv. sched).
I check table VBEP and VBEH and I canu2019t find all items.
Could you help?
Thanks in advance,
E

Hi Manju,
For this you need to set creation indoactor for planning run in SPRO.
The path is spro-MM-CBP-Carry out overall maintenance of plant parameters-Click on maintain-give your plant-click on external procurement under planning run-here you can give your option for the schedule line creation.
Traction code is omi8. Hope this will help you.
Cheers
Ravi

Idoc Message type for Scheduling agreement

Dear Experts,
How to configure to create Idoc for Scheduling agreement (not the releaseed schedule lines) ?
I am trying to use message type ORDERS05 but it is not working.
Will any body guide me preferably step by step process for this ?
Thanks in Advance,
Best Regards,
Raju

Hi Anji,
Thanks for the Reply. But i think ORDRSP is for Order Confirmations.
But I have to send Outbound Idoc for a Schedule Agreement.
Whether the same Idoc type & Messge type used for SO/PO(e.g ORDERS05, ORDERS/ORDCHG) can be used for Scheduling Agreement.
Please Advice.
Regards,
Anbalagan

Confirmation Control for Scheduling Agreement

Hello Experts,
I have got situation for subcontracting scheduling agreement where client doesn't need confirmation control. They want to perform GR against scheduling agreement after creating delivery schedule without extra activity(Confirmation).
Process flow is:
1. Create work order(generates purchase requisition for subcontracting activity)(CO01)
2. Create delivery schedule against purchase requisition for scheduling agreement(ME38)
3. Create delivery to supplier through ME2O
4. Confirm Goods receipt(ME38)
5. Goods receipt(MIGO)
I am trying to avoid step 4.
Standard scheduling agreement setup automaticially fetches confirmation control key 0004. If I am disabling it manually, and not performing step 4, system throws message "no GR relevant item in PO"
Can somebody suggest settings to achieve my scenarion
Thanks and Regards
Gyanesh

Hello PavanKumar,
The inbound delivery is one type of confirmation you are receiving from the vendor so I dont think you will be able to create the inbound delivery without confirmation control key.
Hope this helps.
Arif Mansuri
Reward if answre is helpful.

Message type for Scheduling Agreement - Outbound IDoc

Hi All,
I have to create an Idoc for Scheduling Agreement through a Z program based on some conditions. I have bit confusion, whether i can use Idoc type for Orders(e.g ORDERS01..05) & Message type ORDERS / ORDCHG to generate Outbound Idoc.
Already there is process code for for ORDCHG mappig IDOC_OUTPUT_ORDCHG & ORDERS mappig IDOC_OUTPUT_ORDERS. Whether there will be any impact on this.
Appreciate your help.
Regards,
Anbalagan.

Hi Anji,
Thanks for the Reply. But i think ORDRSP is for Order Confirmations.
But I have to send Outbound Idoc for a Schedule Agreement.
Whether the same Idoc type & Messge type used for SO/PO(e.g ORDERS05, ORDERS/ORDCHG) can be used for Scheduling Agreement.
Please Advice.
Regards,
Anbalagan

Release strategy for Scheduling Agreement(SA)

Dear Forum,
This issue is with regards to the release strategy for Scheduling Agreement(SA)
Until now release has only been applicable to contracts at our client site. But we now plan to introduce it for SA as well. Such a feature is available in SAP but the problem is that with the given release strategy GR is not allowed until the release is affected. The system allows you to post the delivery schedule.
Now what I want is that after making the SA the system should not allow to make delivery schedule if release is not affected.
We also have MRP run at client site..Kindly suggest the procedure as, how to configure it.Are der any User Exit for the same,if so please discuss..
Warm Regards
Nainesh
SAP ECC 6.0

Hi,
What's the SA Type that was created via MRP.
If it's LP (without release document), release will not do anything BUT
If it's LPA (release document), then you will not be able to Post the GR until release is affected.
Thanks.
Scheduling Agreement can be categories as
1) LP (without release document) and
2) LPA (with release document)
If use LP, you can do GR without release but with LPA, you need to release the schedule line via ME38.
Thanks.
NanoSAP
Posts: 58
Registered: 1/5/09
Forum Points: 6
   Re: release strategy for Scheduling Agreement(SA)
Posted: Jun 26, 2009 8:32 AM    in response to: sathish.kumar           Reply
Dear Mr.Satish,
Thanks a lot for your earliest reply...But my point is i want the system should not allow to make delivery schedule if release is not affected...Though schedule lines are generating through MRP run...Is is possible,by any chance...??

IDOC for scheduling agreement

i need to create a Z output type for scheduling agreement(application EV in NACE) which triggers an idoc...Its for the whole agreement and not for each line item. ..i need to know the basic idoc type for scheduling agreement to be assigned in partner profile (like DELFOR for delivery schedule) in WE20..
Edited by: nevinphilip on May 10, 2010 9:30 AM

The DELFOR.DELFOR01 IDoc can be used for delivery scheduling. Is that what you're looking for?

Automatic delivery schedule for Scheduling Agreement

Hi all...........
I like to create automatic delivery schedule both JIT & FRC schedules for Schedule agreement, means system has to suggest the schedule lines.
I created SA and creation profile, when Im trying to generate JIT schedule system showing "Error generating release against scheduling agreement (cause 2)".
Pls let me know wht configuration I hve to do and pls let me know all the steps.
I like to know output determination setting for SA releases also.
regards
Durga Ram

Hi
'Propose all Items" is ticked so that MIGO proposes all the items irrespective of the delivery date and quantity. This means that even if the delivery date has not yet been reached or the complete qty has been received, the system will still allow you to do the GR.
Hope this clarifies.
Thanks

Header text not printed for scheduling agreement

Hi All,
I have issue with header text print out for scheduling agreement (SA).
In SA when I am manually writing some note and then taking print out, system is giving me correct output with maual note.
I have one standard text (ST) which I need to be printed in evry SA, so in SPRO I created new head text for vendor and in copying rule for text for SA, I created linkage of SA header text with Vendor head text.
In vendor master, I inserted ST in newly created vendor header text.
So now when ever I create new SA for vendor system will determin header text from vendor master.
Now after creating SA when I check the SA, I am able to my ST in SA, but at the time of print out this ST in not printing.
Please let me know what could be the reson.
Regards,
Sameer

I dont understand about what you mean by expand.
When you a print PO, PO text (header or item) it will check to the configuration setting.
The system didnt care if its adopted from vendor master or info record, or whatever you make in the copying rule.
In your case : you create a standard text then it get copied into PO , then you set the standard text to the PO for print out, example the standard text : word is
"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
Then in the PO the text appear will be like below(the same, because it get copied)
"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
If you configure it in define text for SA, then it the print out it will also (the same)
"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
So what text need to expand?

Version Management for Scheduling Agreement

Similar Messages

Maybe you are looking for