Version management not updating in printpreview of the me22n or me23n

Dear All,
i am fuctional consultant
we have activated vesrion management for our PO's, the thing is after making any changes we are updating version,and if we see the print preview with t.code Me22n or Me23n vesrion is not updating, where as if we see in ME9F and spool version is updating.
only vesrion number and we have changed the header text aslo instead of purchase order after vesrion change it should be Amend purchase order of verion-1 (ex). rest alll like if u chage the qty or price and total value calucation all refelecting in Print preview.
for this we have tested with standard for MEDRIK for that aslo in print preview with t.codde Me22n and Me23n vesrion is not updating , where vesrion is showing in me9f and spoll.
Please help is there any config we need to do or is it a bug.
Regards
Venu gopal

Dear,
Even in MEDRUCK print preview with t.code ME22N and ME23N vesrion is not showing, but its showing in ME9F and spool...
Regards
Venu Gopal

Similar Messages

EP SP19 Upgrade - Version File Not Updated

Hello!
We have updated EP SP17 to SP19 with minor problems (fixed instantly), the process is through successfully, but the version information is not updated, it still shows the old version. We are confused whether EP is updated to patch SP 19 or not. We appriciate for your advice.
Thanks in Advance
Immanuel

SAP on Windows is concentrating a little more on the operatings system specific aspects.
Therefore I don't expect that your question will be answered here.
regards
Peter

I cleared the cache and my site does not update! What's the secret?

I cleared the cache and my site does not update! What's the secret? I created a second website and bought a domain name. You can get to the site by it's mac name or the purchased domain name. I linked the domain name and with my server and it works. The site comes up wither way. BUT, either way, I cannot get my changes to appear. I had realized that my links were not working because I had placed them within the header. So, I moved the links out of the header, republished, and now the new pages (with links in body of website) will not load. Here are the two ways to get to see the site. Both show the old way (links in header). What is up with me not being able to see the changes in either Firefox or Safari?
http://www.frankysoldiesbutgoodies.com/
http://web.mac.com/musbegin/iWeb/OldiesButGoodies/OldiesButGoodies.html
Thanks,
musicalbeginnings

hello mccormick.lee, please try downloading the full setup file for the current firefox version from https://www.mozilla.org/firefox/all/ and install it on top of your current installation.

Hi - my Mu was "buggy" and would not update - so i threw the APP in the trash - but now CC will not allow me to Re-Install because it thinks i already have the APP - any advice?

hi - my Mu was "buggy" and would not update - so i threw the APP in the trash - but now CC will not allow me to Re-Install because it thinks i already have the APP - any advice?

restore your app from the trash and then properly uninstall.
if that fails, CC desktop lists applications as "Up to Date" when not installed

I have iCloud on my iMac, macbook and iPhone. However, when I update my contacts on one, it does not update on any of the other devices. The calendar seems to be working. Any suggestions?

I have iCloud on my iMac, macbook and iPhone. However, when I update my contacts on one, it does not update on any of the other devices. The calendar seems to be working. Any suggestions?

On the iMac and MacBook open System Preferences > iCloud
Deselect the box next to Contacts, then reselect it then restart the Macs.
On the iPhone tap Settings > iCloud
Switch Contacts off then back on then restart the iPhone.
Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.

Help can not update my CS5 on the new PC

Help can not update my CS5 on the new PC

I don't know whether you are running Windows or Mac OS, so I will link you to the Product updates page.
Look under Photoshop, choose your OS and look under CS5 for the 12.0.4 Multilingual Update (MUL). You simply download and install.
Adobe Camera Raw 6.7 is the latest and you download and install that.
Under Product updates look for Bridge and apply all updates.
CS5 is quite old and the updater doesn't work as it should so you have do the updates manually.

HT5621 i could not update my applications since the account that applied was when i was in the US...it says that i needed to change itunes store here in the philippines and how do i do that?

i could not update my applications since the account that applied was when i was in the US...it says that i needed to change itunes store here in the philippines and how do i do that?

Click here and follow the instructions to change the iTunes Store country.
(87167)

Why apple was not update facetime call over the cellular for iPhone 4?????

why apple was not update facetime call over the cellular for iPhone 4?????

Facetime will not use the cellular network (if using AT&T) for the iphone 4, 4S or 5 unless you have signed up for ATT's new data share plan. They stated this several weeks ago when there was talk about Iphone5/IOS 6 and Facetime. Your carrier is the one that decides if Facetime will work over the cellular network or not. You might want to contact them. Your other option is to continue using it via wi-fi.

My A. Illustrator CS3 (v. 13.0.0) will not update to any of the latest versions

For several weeks already, my Adobe Updater has been trying to update to the next version (13.0.1) and I kept getting the same message:
Message: Installing the patch....
An error occurred during installation. The update cannot be applied to the product. Please re-install the product and try again.
I re-install the program twice from the original DVD. Yesterday, I downloaded the newest upgrade 13.0.2, ran the upgrade and I am still getting the same message as above.
Should I download the newest free trial of A. Illustrator CS3 and then activated with my serial number? Will the free trial have all the bells and whistles? Does anybody have any suggestion as to what to do to get a clean update? Thank you.
Sal

OK ALL. Fair dinkum. It took me a while as well with updates to illustrator CS3 13.0.0 to 13.0.02. After reading through all the forums, there seemed to be no answer. BUT this is what I found to work for me!.
After reinstalling illustrator (creative suite standard) quite a few times, on my mac, and also another mac, and then updating on a new mac...again illustrator would not update!!!!
WHATEVER YOU DO DONT INSTALL THE FLASH LITE 3.0 update. When updating your program(s), that is creative suite, or whatever, photoshop, version cue, bridge, indesign etc etc... I found that if you check the preferences in the install process, DONT CLICK FLASH LITE 3.0.
S*it after that I managed to get all the programs to update with no problems.
Good luck everyone! Hope it works for you as it did for me.
Regards
Steve

HT1386 my itunes will not show devices, so I can not update my iphone to the latest version and use icloud. I have windows xp. what do I do?

my itunes will not show devices, so I cannot update my iphone to the latest version and use icloud and all the other advantages. What do I do? my computer runs on windows xp

this link should help http:///support.apple.com/kb/TS1538

Driver version C5621gw not updated to 8.0.10.1 (stuck on 8.0.8.5)

I downloaded Ericsson H5321gw/C5621gw Mobile Broadband Driver for Windows 8.1 (32-bit, 64-bit), 8 (32-bit, 64-bit) - ThinkPad (http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS032425) because I occasionally have an issue with resuming. If I switch off the setting to preserve power on the driver, the machine crashes after a resume. I also have the issue that after resume, broadband is simply not there.
So I downloaded the new driver g7wo09ww.exe wihich should contain the new driver 8.0.10.1. This driver is supposed to fix this problem (see below).
However, after installation my driver says 8.0.8.5. Even after completely deinstalling the driver and reinstalling, I'll end up with 8.0.8.5 instead of 8.0.10.1.
Is there a way to get the latest driver installed?
Thanks,
Ruud
Version 8.0.10.1
(Fix) Specified the machine types of ThinkPad X1 Carbon (Machine types: 34xx).
(New) Added support for Windows 8.1.
(New) Improved the GPS radio performance.
(Fix) Corrected the unattended install command option from "-SILENT" to "/s".
Version <8.0.9.3> (G7WO08WW)
(New) Added support for ThinkPad Helix.
(Fix) Fixed an issue wherein Ericsson Mobile Broadband did not display in
Network Panel for about 20 seconds after System Suspend, Hibernate, or
Restart.
(Fix) Corrected the model name from ThinkPad S230u to ThinkPad Twist and
ThinkPad Twist S230u in this Readme document.
Version <8.0.8.4> (G7WO06WW)
(Fix) Fixed an issue where automatic connection to the internet after resuming normal operation from sleep/hibernation or restarting the computer.
(Fix) Fixed an issue where the connection button might not work after the Airplane mode was turned on/off.
(Fix) Fixed an issue where the navigation pointer on Bing Maps did not move smoothly.
Version <8.0.5.3> (G7WO05WW)
(New) Initial release.

I get the same behaviour - the driver reports as 8.0.8.5 after installing the update described on the web site as 8.0.10.1
What is also interesting is that when I first check the driver after reading this post, the driver I had installed was earlier than 8.0.8.5, despite running the Lenovo update tool on a regular basis, so the Lenovo update tool doesn't seem to even know about this 8.0.10.1/8.0.8.5 update.
Matthew

My Macbook Pro OX S 10.6.8 version will not update!

My Macbook Pro OX S 10.6.8 will not update! I've tried restarting, clearing cookies, checking javascript is turned on, removing 'older versions' of an update, nothing is working. Please help! What else can I do?

I would attempt to do them one-by-one to see if it is one particular update that is hanging it up. I would start with the ones from Apple that are either Security Updates, or Firmware Updates. The ones with the Grey Circle/Arrow in them are important updates, I would attempt to do them first. It may be a bad package from something else that is hanging it up.
If you can successfully install the crucial updates, then afterwards I would try doing all of them.
Also is it just attempting to install but then when you reboot it is still saying you have to update? Or is it giving you an error message about updating?

Why the PO action history is not updating when i perform the vacation rules

Hi,
Can any one explain why the action history is not updating when performed the vacation rules using the below example
Example: A >B>C>D are in the approval hierarchy here I have defined the vacation rules by login to the user C here I selected the item type as “All” and delegated to D.
Now the buyer “A” has sent the document for approval. The user “B” can successfully reserve funds and approved the document. Now the document is automatically delegated to D. Here D can open the document from open notifications and approved the document. Now when I checked the Action history here I cannot find the performed name D who has actually approved the document.
Note:we are using the 11.5.10.2 version.
The Action History in the following manner
Seq Action Performed By
================================
4 Approve C
3 Forward B
2 Reserved B
1 Forward A
0 Submit A
From the above action history why the user D name is not showing. Can any one let me know ASAP?
Regards,
Keivn.
Edited by: user10960960 on May 5, 2009 3:36 AM

When you set up the vacation rule, if you simply delegate the ownership to D, then C retains the ownership and the approval occurs with C's limits. And hence D is treated as the approver.
If you transfer the ownership, then C is out of the picture. The notification goes to D and when he/she approves, D's limits kick in and he will be seen as approver.
Hope this helps,
Sandeep Gandhi

Visual nodes not updating unless I resize the application window

I'm not sure what has happened here but I can add new nodes and use my app as normal but there is no longer any change on screen to indicate modified nodes until I resize the application window!
Once i double click the top of the app window sure enough I can see the new nodes that were added.. this is very frustrating.. Any ideas what this could be?
I went back to an older version of my app and it is occurring with that also so it isn't new changes to the app. Is my javafx broken somehow?

This is really weird... I reinstalled java, javafx, and netbeans and it didn't rectify the problem immediately. After a few days I came back to netbeans and tried the application and it was working properly. Without changing anything.
Now again, I shutdown and restarted the PC and have come back to netbeans and the application will not update moved objects on screen unless you resize the window!
This is really crazy... I literally had this application working perfectly for several days before I shut down my PC (I usually just sleep the computer for days on end until it needs a reboot).
Restarted PC and the old problem came back... I'm running Windows 7 64 bit... Am I going crazy? I don't feel this is code related!

TS2776 I can"t syn my ipod nano as I had a new version of itunes installed as my old version was not working at all. The message I get is that it can't sync as my old music library is not on the new version of itunes but I still have it on my ipod.

I can't sync my ipod nano with the new version of itunes that I downloaded as the old version was not working. The response I get is that" it can't sync due to my old music library which I still have on my ipod, can someone help with this, Thanks Peter

See Recover your iTunes library from your iPod or iOS device.
tt2

Version management not updating in printpreview of the me22n or me23n

Similar Messages

Maybe you are looking for