Version Management on PR with Release Strategy

We are using Release Strategies on PR, along them Version Management activation is also required. All configuration have been done, Versions are automatically triggering in PR's without release, however in PR with release new version is not reflecting, every change is going in Version 0.
Suggestion is required...
Full points will be awarded.

Refer the note 664928
You change a purchase requisition. Why does the system not generate a new version?
Answer:
The system always creates a new version when the purchase requisition reaches a final processing state. These are the following processing states:
Active, if no release is used
Release completed, if the release is used
Only the following changes to a purchase requisition lead to a new version:
All version-relevant changes (defined in purchasing Customizing under -> Version Management -> Version-Relevant Fields of Purchase Requisition)
Changes to the document assignment

Similar Messages

  • Send purchase order e-mail with release strategy

    Hi!!
    I have a problem with sending e-mails in purchase order that are blocked with release strategy.
    I create a purchase order that is block for the release strategy, then I release it. This is working OK, but I can't send an e-mail with this released puchase order, to do it, I have to modify something in the purchase order.
    Somebody knows what is happening?
    I would like to send e-mails without previous modification of the purchase order.
    Thanks for your help.

    Hi,
    Purchase order via e-mail in SAP sys,the configurations and pre-requisites are follow:
    1. You must maintain an e-mail address in the address in the vendor master.
    2. The same applies to your own user master. You also have to specify an e-mail address there in order to identify the sender.
    Note that it is not possible to change the e-mail address of the vendor via the SAP purchase order transaction (ME21N, ME22N, and so on). The system only uses the e-mail address of the vendor that is maintained in the vendor master!
    3. For the output type for default values, a communication strategy needs to be maintained in the Customizing that supports the e-mail. You can find the definition of the communication strategy in the Customizing via the following path: (SPRO -> IMG -> SAP Web Application Server -> Basic Services -> Message Control -> Define Communication Strategy). As a default, communication strategy CS01 is delivered. This already contains the necessary entry for the external communication. Bear in mind that without a suitable communication strategy it is not possible to communicate with a partner via Medium 5 (external sending).
    4. Use the standard SAP environment (program 'SAPFM06P', FORM routine 'ENTRY_NEU' and form 'MEDRUCK') as the processing routines.
    5. In the condition records for the output type (for example, Transaction MN04), use medium '5' (External send).
    6. You can use Transaction SCOT to trigger the output manually. The prerequisite for a correct sending is that the node is set correctly. This is not described here, but it must have already been carried out.
    7. To be able to display, for example, the e-mail in Outlook, enter PDF as the format in the node.
    For more details, check SAP note:191470
    Regards,
    Biju K

  • Purchase Order E-mailing with Release Strategy

    Hello,
        We are experiencing an issue when e-mailing a Purchase Order which has a release strategy. When the order is released, the confirmation e-mails are going to the person who releases it when it is supposed to go to the person who has created the P.O. We are using a Smartform P.O. based on /SMB11/BL_MM_PO_L and print program /SMB40/FM06P. I must note that there was a bug found in the aforementioned print program and before that was fixed e-mailing would not work at all.
      We have also attempted to use all combinations of standard unmodified print programs and standard unmodified smartforms and have had no luck at getting the confirmation e-mail to send to the correct person this way either.
      SAP has recommended that we use program SAPFM06P with form Medruck. While this combination does work correctly, Medruck is not a Smartform. Has anybody here used a smartform Purchase Order with a release strategy and had the confirmation e-mail send to the created and not the releasor?
      Below is a list of the print programs and forms we have tried in various combinations. We are running ECC6/Basis 7
    Print Programs:
    /SMB11/FM06P
    /SMB40/FM06P
    SAPFM06P (Sapscript Only)
    Forms:
    /SMB11/BL_MMPO_L
    /SMB11/MMPO_L
    /SMB40/MMPO_L

    Hi,
    Purchase order via e-mail in SAP sys,the configurations and pre-requisites are follow:
    1. You must maintain an e-mail address in the address in the vendor master.
    2. The same applies to your own user master. You also have to specify an e-mail address there in order to identify the sender.
    Note that it is not possible to change the e-mail address of the vendor via the SAP purchase order transaction (ME21N, ME22N, and so on). The system only uses the e-mail address of the vendor that is maintained in the vendor master!
    3. For the output type for default values, a communication strategy needs to be maintained in the Customizing that supports the e-mail. You can find the definition of the communication strategy in the Customizing via the following path: (SPRO -> IMG -> SAP Web Application Server -> Basic Services -> Message Control -> Define Communication Strategy). As a default, communication strategy CS01 is delivered. This already contains the necessary entry for the external communication. Bear in mind that without a suitable communication strategy it is not possible to communicate with a partner via Medium 5 (external sending).
    4. Use the standard SAP environment (program 'SAPFM06P', FORM routine 'ENTRY_NEU' and form 'MEDRUCK') as the processing routines.
    5. In the condition records for the output type (for example, Transaction MN04), use medium '5' (External send).
    6. You can use Transaction SCOT to trigger the output manually. The prerequisite for a correct sending is that the node is set correctly. This is not described here, but it must have already been carried out.
    7. To be able to display, for example, the e-mail in Outlook, enter PDF as the format in the node.
    For more details, check SAP note:191470
    Regards,
    Biju K

  • Chek budget in PO with release strategy

    Hi
    When i created a PO with a release strategy and the comand need it, the budget are not checking at the save, only when i release the PO.
    Is it possible to check the budget (on a PM order or on WBS element) at the PO save.
    Thank's
    serge

    Normally checks like those happen once the PO is released ( example  - output is not allowed etc)...
    You may need to add something in the PO release strategy user exit to do the check before release (after save), Look into the below to see if this works.
    Name of the Enhancement: - M06E0004
    Name of the function module: - EXIT_SAPLEBND_002
    Hope this helps

  • Workflow with release strategy

    Hi All,
    Can anyone tell me if it is necessary when using workflow to help with the PR release that it be first released by the requisitioner, then the approver, then the buyer. Then it will be ready to process the PO.  We are configuring workflow into the system and it is my understanding that this is the way it has to be in order for workflow to work properly. Can someone please tell me if this is right? Does the requisitioner and the buyer have to be part of the release strategy in order for this to work?

    Hi Gregory
    Requistioner and then further approvers are required but there is no need to have buyer as one of the approver. because any how he is going to invoilve in PO release.
    Regrds
    Yogesh

  • Why PO is automatically assigned with release strategy?

    I created a PO with PO document type NB and NB is not assigned with any release strategy.
    But the PO with NB type is automatically assigned with release stragety when I save it as a completed PO.  Why?
    And only when the PO is in held status, there is no release strategy assigned to NB PO.
    Is the normal ERP behavior?
    I only assigned a release strategy to PO document type DB, which means dummy document type.

    Please check the release strategy of PO, whether document type NB is assigned to it. May be you are checking the wrong release strategy. Look up the release strategy under CLASSIFICATION button, may be if multiple release strategies are used, your document type is assigned to some other strategy.
    Easier way to check which strategy is getting applied, is in PO release strategy look up rel. strat No. which will come under release group, look up in spro with this release strategy no. in spro which will shorten your search.
    Edited by: Afshad Irani on Jun 3, 2010 1:58 PM

  • Workflow with Release Strategy for PR & PO

    Hi Experts,
    I have configured the PR & PO Release strategy and it is working fine. My client wants the Workflow concept in Releases.
    So User should get the information about the releases for PR & PO.
    But I don't have much idea on Workflow, how it works for Release strategy. Can anybody give information on how to configure the Release strategy with Workflow in PR & PO.
    Points will be awarded .
    thanks & rgds
    Swamy

    Swamy,
    There are several posts available for this requirement, I would suggest you to search this forum and you would hit many threads which address this in more details and handy explaination
    check this link for PR
    http://help.sap.com/saphelp_47x200/helpdata/en/04/92768046f311d189470000e829fbbd/content.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/04/9276e846f311d189470000e829fbbd/content.htm
    For PO:
    /thread/743773 [original link is broken]
    Standard workflow template for PR and PO are:
    WS20000075
    WS20000077
    These can be viewed using PFTC/SWDD etc.
    Cheers
    Jai

  • Deleted purchase order with release strategy

    Hi all,
    When PO are deleted, the release strategy is disabled. However, if you mark final invoice and delivery completed indicators, the release strategy is triggered, even if the po is deleted.
    Is it possible to disable the release strategy when final invoice and delivery completed indicator are marked?
    Thank you for your answer

    The technical expert in my team has found the explanation to that problem:
    A deleted item is "statistical" => there is no release strategy (standard control in ME_REL_STRATEGIE_EKKO function module)
    But if ''final invoice'' and ''delivery completion'' are marked, the item is NOT statistical (standard control in LMEPOF4X include)
    Therefore, a release strategy is redetermined even if the item is deleted
    Thank you all for having tried to help

  • Print Preview Purchase Order with release strategy

    Hi gurus,
    With release stratregy you can not print a PO before release through ME9F. The system will give error message 'No corrosponding document found'. However, you can print PO through 'Print Preview' by clicking on Print icon in ME22N, we need that "Print Preview"doesn't print PO without release. System it shouldn't print.
    Thank you!

    Hi,
    Hope you are using Z output type & print program for PO printing. You can restrict this by modification in program. Please do it with help of abaper.
    Regards,
    Sandeep

  • Version Management with Requisition

    Hi,
    We have activated version mangement for requisitions. Some of our requisitions are not routed through approval process.
    Version management is working with requisitions not related to release strategy.
    But version management is not triggering requisitions with release strategy.
    Please advice.
    Regards,
    John K.

    Thanks for your quick reply.
    Yes, we checked Version Completed check box and selected the reason for change also.
    In config we set version will trigger for quantity, account assignment, price, delivery date and short text. But PRs subject to release strategy is not triggering next version (for example Version 1) always on Version 0.
    Please help.
    John.

  • PO Release Strategy not changed after deletion of few line items with less

    Subject : PO Release Strategy not changed after deletion of few line items with less Total PO
    Dear Friends
    We have issue with PO Release strategy. We have created the PO. with release strategy  with multiple approvers.  After approval of first approval manager , one of the PO line item got deleted and Total PO value is reduced . The new PO value should have changed the PO release strategy. But it is not changed. Old release strategy only showing in the PO which is wrong. 
    Details of the PO
    PO no 4500000123 with 5 line items Total PO value : 100,000 USD Release strategy : AB
    PO line item 5 deleted. Now total PO value changed to 50,000 USD and the PO release strategy should have been changed to AA but not changed. Still showing PO release strategy AB only.
    Are there any OSS notes available to correct his bug.
    Please let me know if you need more details
    Thanks in Advance
    Thanks
    MVS

    Hi,
    release indicators  change it to 4.It may works. Please explore to all 6 indicators..........
    i.e,
    1-cannot be changed
    2-changable,no new determination of strategy
    3-changable,new release in case of strategy
    4-changable,new release in case of strategy or value change
    5-changable,new release if new strategy/outputted
    6-changable,new release if new strategy or value changed/ outputted......
    And check   Characteristic description and value in Classification  of Release strategies ........
    I hope this will help you. Thanking you.
    Regards,
    Venkat.

  • How to assign Release strategy with new PO type

    Hi experts,
    I have created new PO type but the same is not mapped with release strategy at the time of raising purchase order.
    I have done the following steps :
    a ). Creation of new doc type via SPRO > MM > PURCHASING > PO > DEFINE PO TYPE
    b).  Edit characterstics in release strategy via path SPRO > MM > PURCHASING > PO > RELEASE PROECURE FOR PO > EDIT CHARACTERSTICS > VALUES  (  MENTION NEW PO TYPE & DESC. HERE )
    Still I am unable to find release strategy tab in purchase order. Please help.
    Suggestions / Rewards will be highly appreciated.
    Regards,
    ( Rajneesh Gulati )

    Hi ,
    I dont know how much customisation u have complited ,
    But for release strategy
    1 Following are the imp charecrticities ct04 you have to define
    Order type (Purchasing)
    Plant
    Total net order value ( with  table &  field)
    2.check or create relese group is assighned to appropriate class cl01 (with above charecricities )
    3.define relese code ( in this u define release level --supervisor , manager etc)
    4.release indicator  (block ,release)
    5.define the group with strategy in that specify prerequisites,release status,classification (specify to the document & plant you want to maintain)
    6.create po me22.  In me29 you can release it( unless u cant process)
    Dev

  • Issue with PO Release strategy

    Hi experts,
    I have problem with Po release strategy in 5 to 10 purchase orders, i have created few purchase orders(2000 Po's) with same document type and company code ..etc and saved, then release strategy has been triggered.
    For few purhcase orders release strategy has not been triggered.
    If i take 1 po from that few purchase orders(Release strategy has not triggered) as reference and again if i create PO,new purchase order have getting created with release strategy.
    Can some body tel how this ican be possible, hope this might be standard syatem behaviour.
    Hope i should delete thos e purchase orders and i should create new PO's instead of of old PO's (Without release strategy).
    Some experts can share their experiance in this regard.
    And how i should proceed further with this issue.??
    Thanks

    Hi,
    You issue in your system has 2000Nou2019s purchase orders  with release strategy has been triggered but 5 to 10 purchase orders do have release strategy.
    & when you are creating a new PO with reference to old purchase orders (which release strategy has not triggered) and on saving NEW PO created with triggering release strategy.
    Cause for above:
    PO which release strategy does not trigger because the purchase orders are created before setting release strategy for PO. Those PO triggered release strategy and all are created after setting release strategy for PO.
    Action:
    Its completely business call for business users to go for options:
    Option-- >1# You can use same old PO which release strategy does not triggered, do GR and all other process
    Option-- >2# You can create new PO with reference old PO which release strategy does not triggered and upon saving you will have new PO number with release strategy triggered, then release PO & do GR and other related process.
    Regards,
    Biju K

  • Purchase order release strategy with multiple characteristics

    Hi All,
    We have Purchase order release strategy based on the following characteristics:
    Total Net Order Value
    Purchasing Organization
    Release strategy Type
    a few other custom fields
    We would like to have PO's with release strategy based on a particular Material Group [say X]. I have created a new Characteristic with respect to CEKKO-MATKL and added this characteristic to the same class.
    I have created a new release code [HR] [we need a different person to sign off] and a new release strategy [TR] for which I have assigned the release code HR. In this release strategy, I have set it to get activated for a particular Material Group that does seem to work, but the remaining PO's are not getting triggered for other material groups. For other release strategies, I have left the material group field blank, because they need to be triggered for any material groups except X.
    Could you please let me know if I am missing something  or is there an alternate approach to this ?
    Thank you,
    Satish

    Hi,
    Obviously system will not trigger release strategy in ur case since in the classification data for other strategies u have left it blank excepting X for one strategy.
    Since u have added a new characteristic Material group  and assigned it to class then system expects an input for Material group for triggering release tab.If this is left blank then system by default will not trigger release strategy tab.
    Solution:
    First add all existing material groups in values tab of mat group characteristic then maintain the required set of material groups except X in other strategies in classification data.
    Hope this is clear to you.
    Regards,
    Uzair

  • How to Display PO Release Strategy in Enjoy Screen

    Dear all,
    I have a PO with a release strategy, which contain several release codes to release the PO (i.e. M1 & V1).
    However, I am only able to display the release code (i.e. M1 & V1) in t-code ME23. I could not do the same in the enjoy screen t-code ME23N for the same PO number.
    In the item level, there should be a tab with release strategy to display the PO release strategy (similar to PR), but it is not appearing.
    Could anyone tell me what is the problem here? I just could not find the tab or menu to view the release strategy of a PO in the enjoy screen. Similar goes to other PO. I could not view it as well. But in the old screen, I could view it.
    Thanks a lot.

    Thanks 4 the reply Rahul.
    I understand that it is only possible to release at header level. What my problem is that I am unable to view the release strategy (which code to release and who to release) for the PO in enjoy screen.
    In my earlier thread replying to Ankur, I am simply describing that I could just select a line item, click on the release strategy button and the release strategy is displayed. A different line item with different value generated a different release strategy of course. Different amount require different set of release strategies, usually more level of approvals.
    So, actually this question is not about where or how I can release a PO, but actually I could not view who is releasing for a PO in ME23N.
    I even simulate it in the development server and still the same thing happen. Is it the same for everyone else? If yes, how to view who is releasing the PO in ME23N? Version of system is 4.7.
    Thanks and appreciate if anyone could help.

Maybe you are looking for