Version not active in production

Hi experts,
I have transported workflow from development to QAS and production  but my workflow having 5 versions but no one is selected as active in production,
in quality version is active.
i executed transaction SWU_OBUF. also i activated in dev, created transport request and released but still  version is not active.
please tell me step to activate the version
Thanks Deep

Hi,
If there is no error's in workflow, then it might be the buffer issue.
Create a new version in Development client and then save the workflow. Surely it will ask for the request. Then activate the workflow and Transport it to production via Quality.
During the transport, try to close your workflow in all clients.
After Transport is successful, Log in to Production and check it.
Thanks,
Viji.

Similar Messages

  • Recent Workflow Version not active in Production server

    Hi Gurus,
    Recently, I made a  minor change to an existing workflow. After the changes, it was transported to QA and Production. In QA, the changes are reflected and when I click on the version overview tab of the workflow, I can see that my last changed version is the active version. But, In production server the last version is  not active. The previous version before my changes remains as the active version. Though it shows my version their, it is not active and the change are not yet reflected.
    To solve this I tried following ways,
    1)  I refreshed the buffer in SWU_OBUF in Production, but no improvements.
    2) Then I tried to check, if there could be any errors when I activate the workflow in Development server. But, there are no errors except few warnings like some of the variables declared for the workflow but not used. So, this also does not help.
    3) Then I tried changing the workflow to tag it again to a transport request thinking in a way, previously there might be a problem in attaching the active object. But, even after transporting the second changes, the workflow version is still not active in Production. But, it is active in QA.
    Please let me know, if I can try any other ways which is not mentioned above!
    Thanks a million.
    AM

    Hello,
    Check the transport logs for any errors and make sure all the transports have been done, and in the right order.
    What was the minor change that you made?
    You can get situations like this when you eg create a task, don't transport the task, and then add the task to a workflow and transport the workflow. In Development all will be fine, but not so in QA and/or Production.
    regards
    Paultje Bakker
    Hanabi Technology

  • Screen changes are not active in production tenent

    Hi Experts,
    I realized the transport of a solution to the production environment and as can be seen in the attached image the solution has been successfully activated.
    The scripts "OnSave", "AfterModify", etc for example are up and running in the production environment, but all the changes that were made on screen are not displayed to users.
    Does anyone know how to make the screen changes available to users?
    Best regards.

    Hello Felipe,
    What tool did you use to "make changes on screens"?
    UI Designer started from SDK?
    Adaption mode in UI?
    Bye,
       Horst

  • Production Version Not Reflecting in Production Order

    Hi Experts,
    I have a query, I have made alternative BOM and second Production Version of a FG Today. Production Version is very much Ok (Green). I have clearly mentioned Alternative BOM 2 in alternative bom.
    When creating production order thru CO01, production version is not coming in Co01. Message is coming " No valid production version is found for this material".
    Kindly confirm me what mistakes I have done.
    Regards
    GR
    Edited by: G R on Dec 18, 2008 9:48 AM

    Dear G R,
    1.Check whether your prod.version has been locked and what value have you maintained in MRP4 view
    BOM selection method.check whether has it got the value 02.
    2.Also in OPL8 - under planning tab select the option for manual selection of production version.
    check and revert back.
    3.Also check the validity dates.Also your production order start date.
    Regards
    Mangalraj.S

  • MTO Scenario - Deletion flag not active in Production order

    Hi,
    I have a production order with MTO scenario, even if the order is CRTD status, i could not set the deletion flag to the order. Deletion flag activate and revoke options are grayed. What could be the reason for that..? how can i set the deletion flag to that order now..?
    Thanks in Advance,
    V.S.Sabitha

    Hi,
    My status is CRTD PRC  MANC SETC.
    The status profile header field is 'Blank' for my order type in spro settings.
    In BS22 for I0076, BFRZ - Revoke status 'Released' is set to 'Forbidden' radio button.
    Only for the MTO material, i could not activate the deletion flag. For other materials, the deletion flag option is active both in Created and Released status.
    Sabitha

  • X-STEP NOT ACTIVATED  IN PRODUCTION ORDER

    Hi,
       I am not getting the Xstep button in production order,where as its visible in routing.
      I am working on ECC6,EHP4 and have activated the business functions-EA-SCM and LOG_PP_XS_RTG_PO.
      Also in CMXSV I have created std xsteps and assigned in COCR_PROF tocde.
      But still i am not getting that xstep button in production order.
      Is there any thing else that I am missing?? like some config or basis & abap activities??

    Hi,
    there is no special customizing setting to activate the XSteps in the production order. Could you try whether the button for XSteps is visible in the process order (COR1)? You don't need PP-PI master data for this - just enter a PP material, plant and a PP-PI order type (e.g. PI01). This is also independent from anything you might set in COCR_PROF.
    Also please check whether the SAP namespace is released in CMX04.
    If that does not work I suggest to create an OSS message.
    Regards,
    Arne

  • CS4 (student version) not activating after trial

    I bought the CS4 Student Edition thru my college but now after the trial period the original serial number does not work any more.
    What should I do?  I paid the full fee for the edition.  Thx.

    Hi,
    Dont unrelease the PR , change directly in ME52N  after release only , note that the feild which you are changing should be in change relavent feild in verson management setting.
    This may hep You,
    Regards
    Mahesh M J

  • Bridge will not now let me use camera raw, though I had been using it every day.  It says that "the parent application is not active.  Bridge requires that a qualifiying product has  been launched at least once to enable this feature."  What am I to do?

    Bridge will not now let me use camera raw, though I have been using it every day.  It ways that "the parent application is not active.  Bridge requires that a qualifiying product has  been launched at least once to enable this feature."  What am I to do?

    Usually this points to having some kind of earlier trial version still installed on your system. However without more details you are not likely to find an answer. Try this for a start:
    How To Get Help Quickly

  • In Adobe Bridge when I try to open my camera raws, I get a pop up box stating "Bridges parent application is not active.  Bridge requires that a qualifying product has been launched at least once to enable this feature"  What do I do? Please advise

    In Adobe Bridge, when I try to open my camera raws, I get a pop up stating"Bridges parent application is not active.  Bridge requires that a qualifying product has been launced at least once to enable this feature."  What the heck?  I have a PC and haven't had problems before.. I have adobe cloud and pay my monthly bill...

    Have you opened Photoshop or any other Adobe app that Bridge works with?  You need to do this if you've upgraded PS or just signed up for CC.

  • My iphone 3gs is not activating after updating my software with i tunes...what shall i do? cant i go back to my normal version which was ios 4.1

    my iphone 3gs which is not associated with this accunt is not activating after updating the sof tware, it connects to i tunes but i tunes says "we arh your unable to continue with your activation at this time, please try again later or contact customer care". my iphone aslo just says it cannot be activated or something like that every time i try. i have been waiting for 4 hours now but it still hasnt worked. how can i uninstal this update and go back to my old version which ws ios 4.1 or or ios 4,3. i dont even know what version it updated to, im assuming it is ios5 but not sure. it says try connecting to i tunes as well but it is connected and i tunes cant activate it either. my phone is connect to a wifi but it stll says no service.
    i will really appreciate some help.
    thanks.

    Generally this is a sign that the iPhone had previously been
    hacked/modified/jailbroken and the update relocked it to the
    original wireless carrier. If this is the case, only that wireless
    carrier can unlock your iPhone. You must contact them to see
    if they offer unlocking and if you qualify.
    Where did you acquire this iPhone?
    What wireless carrier did you use before this problem?
    Does the app Cydia appear on your iPhone?
    What does it say when you look at Settings=>General=>About=>Carrier?

  • Hello my name is jose quant, and let me know how I can use CAMERA RAW adobe bridge because the bridge use and want to open a camera raw image, I get a message that says: MAIN BRIDGE aplicaion NOT ACTIVATED. BRIDGE REQUIRES A PARTICULAR PRODUCT HAS BEGUN A

    Hello my name is jose quant, and let me know how I can use CAMERA RAW adobe bridge because the bridge use and want to open a camera raw image, I get a message that says: MAIN BRIDGE aplicaion NOT ACTIVATED. BRIDGE REQUIRES A PARTICULAR PRODUCT HAS BEGUN AT LEAST ONCE TO ACTIVATE THIS FEATURE. I wonder what that means?
    I use a lapto (windows 7) 64-Bit operating system.
    Thank you,
    my email is: [email protected], if you send me the answer to my query

    You need to activate Photoshop.
    Mylenium

  • After installing Adobe Premiere Pro product CS6 in the program is not active PlayBack

    After installing Adobe Premiere Pro product CS6 in the program is not active
    PlayBack button setting when creating sequence.
    Windows 7 64-bit. Intel Xeon 2, RAM 12 MB. Mxo2

    Hi,
    Thanks for posting that screenshot. It appears that you have opened your Sequence Settings for a DV-NTSC sequence and have made a circle around the "Edit Settings" button.
    Since you chose to create a DV sequence, you cannot change those settings.
    Do you have DV NTSC clips? If so, these are the correct settings.
    If you do not have DV NTSC clips, do not be concerned. Just create the sequence.
    Once you drag a non-DV clip into the DV sequence, it's OK.
    You have the option of changing the Sequence Settings to match those of your clip in a new dialog box.
    Click "Change Sequence Settings" in the dialog box.
    I hope that helps.
    Thanks,
    Kevin

  • I own a copy of CS5.5 that I have on my PC. I have switched to a new iMac and during activation it says my serial number is not for the product I'm trying to activate

    I own a copy of CS5.5 that I have on my PC. I have switched to a new iMac and during activation it says that my serial number is not for the product I'm trying to activate. I have tried live chat a couple times but it says that chat is not available.

    Jb4short you can verify your registered serial number under your account at http://www.adobe.com/.  You can find more details on how to locate your serial number at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
    If you have a volume license serial number then you need to download the volume license installation files from https://licensing.adobe.com/.

  • Help, I have bought Creative Suite 6 student version, I have the product code but not the numbers I need to activate it, can you help?

    Help, I have bought Creative Suite 6 student version, I have the product code but not the numbers I need to activate it, can you help?

    This is not something we can help you with in a public forum.
    You'll either have to call Adobe Customer Service in your region, or use web chat. Here's link to web chat. Enter a product name and problem area. Ignore all the links except the one that says something like, "Still have a problem?" Click that, and you'll get a link to web chat:
    Contact Customer Care

  • Open source /  Commercial version, it's up to you! Why not for ESB products

    Please comment this forum and help us to get Sun's support for Open ESB as we can get it for open-Solaris or Glassfish.
    Thanks
    Paul
    Extract from
    http://www.pymma.com/eng/People/Blog-Paul-Perez-Chief-Architect
    Jonathan Schwartz new policy
    Few years ago, Jonathan Schwartz replaced Scott McNealy as SUN Microsystems CEO. Swartz's first decision was to convert Sun into an Open-Source company. Consequently, Solaris OS, Application Servers and even the Java language were opened and their sources published. At present, Sun is viewed as a major Open Source actor.
    Sun�s new sales philosophy proposes, on one hand, its best products in an open-source format and on the other hand, commercial support and hardware. The best examples of this new philosophy are Open-Solaris and Glassfish. You can download these products, use them and test them. After you have built applications with these tools and wish to move into a production environment, you can buy support from Sun.
    Open source or Commercial version, it's up to you!
    Alternatively, you can as well buy commercial versions at the first place. Even if open sources and commercial versions are slightly different than the open-source ones, more than 95% of their code is originated from the same development branch. Example : SUN proposes its queue messaging system with two similar versions, respectively named �SUN QM� and "Open-MQ". The only difference is the amount you pay for the technical support.
    Everyone can find advantages in this sales policy on Sun products: companies and developers try and develop for free and can rely on Sun support in production. As a matter of fact, Sun uses these �free� products as Trojan horses to conquer new market shares, penetrate new companies and sell Sun hardware.
    Why not for ESB Products ?
    Unfortunately, there is a small issue in this picture: Sun's ESB platform is the exception in this sales policy. In Fact, Sun proposes two different tools for ESB developments. The first product. "JCAPS", is a commercial product inherited from Seebeyond. The second product, "Open-ESB" is based on JBI specifications (JSR 208) and was developed from scratch about 2 years ago.
    Alas, JCAPs and Open-ESB are definitely two different products.
    JCAPS ignores JBI specifications
    JCAPS connectors are based on JCA specifications and not on JBI.
    Open-ESB development process is based on Web services specifications, JCAPS not.
    JCAPS and Open-ESB developments are not compatible.
    Hundreds other differences can be found between the two products.
    We can understand that for a while, for technical, marketing or business reasons, a company supports more than one product lines with the same functionalities. IBM does it and Oracle buying BEA will do it also.
    However, there are several things that Pymma would like to understand:
    Why the download of JCAPS is only available for authorized JCAPS Partner ?
    Why SUN does not provide support for open-ESB as it does for Glassfish, Open Solaris or Open MQ ?
    Why JBI or Open-ESB are never mentioned at most ESB seminars organized by Sun Centres in the UK ?
    Why Sun marketing, Gurus or consultants are prolix about JBI in the public lectures and technical forums, and at the same ignore Open-ESB when they advice companies ?
    Is the policy of Jonathan Swartz policy only applicable for Java Legacy applications (Application Server, Message queuing�)? not for ESB tools ?
    Of course, we already asked these questions to SUN but we never got clear answers.
    Thanks for clarifying Sun's position
    Many companies believe in JBI and their developers spend time and energy working on Open-ESB . These companies would certainly be interested to hear Sun's explanations on the above questions. They probably want to be sure that Open-ESB will not be just a prototype for the new JCAP version (only reserved for SUN JCAPS Partners). They certainly want to be credible by proposing SUN's professional support on Open-ESB as they do for Glassfish and Open-Solaris. After, they only need from SUN to clarify its position and give a clear prospective for the future of JBI and Open-ESB. We hope that through this blog Sun will hear us and we will give us clear answers.

    Hi Leonie,
    My iPhoto is iPhoto 11, version 9.4.2.  I believe my Aperture is the latest version but I don't know how to verify that when I can't open it.  I regularly accept any updates.
    How I restored my Aperture Library: I opened Aperture, clicked on Time Machine, and navigated to the Aperture Library that had been backed-up earlier in the day.  It took a while to restore. 
    When done, I opened Aperture (yes, at that point I could still open it).  It opened up on the still-empty Library, and I had to manually change it to the restored library, every time I opened aperture after that.  This was annoying, so, I then went to FINDER and deleted the empty Library.  I probably shouldn't have done this; I noticed it had the words "current default" in its filename. 
    From that point on, FINDER shows the restored aperture library (actually two restored aperture libraries, since I accessed Time Machine a second time to restore an even older backed-up version) but of course, not the empty Library that had had "default" in its filename.  And... I can no longer open Aperture.
    Hope you can help me, thanks so much,
    Glensdaughter

Maybe you are looking for