Version Number - Both numeric and alphanumeric

Hello
I need to have for a particular document both numeric and alphanumeric versions. I tried it will user exit * but while doing this the sequence of version is getting lost. The version is not proposed while creating new version
Kindly help in this regards
Gajesh

Gajesh
What is your exact requirement? Can you please give more details, it'll help forum to understand & the get back to your with solution.
If you are looking to have your version number like, A0, A1, A2 etc..
Then you need to do following configuration. Go to,
IMG>Cross-Application Components>Document Management>Control Data>Define Document Types , see the details (CTRLSHIFTF2) of your document type. In the next screen, in the Attributes tab, iin Vers. No. Incr. (Version Number Increment Control) field, enter 3 , then you'll have version numbers starting from A0......Z9 . Similarly, if you enter 6 you'll have version numbers startin from AA...AZ,A0...A9,BA..BZ,B0..Z9
I hope it helps you.
Best Regards
Amaresh Makal

Similar Messages

Unable to replicate both Numeric and alpha numeric vendors records from R3

Dear all,
In our ECC 5 environment, we have some vendors who master record numbers that are numeric internally assigned i.e 7000000 or 23000000 and some alphanumeric externally assigned i.e SmallBusiness1 or Grinad10. This is posible as you may know via vendor account groups.
We have implemented a classic scenario in SRM 4, Server 5 environment, therefore we need to replicate ECC backend vendors masters. We initally set SAP's AB business Partner (vendors) number range in SRM to A - zzzzzzzz and created numeric number ranges to match thoes set up for all our vendors in ECC.
When we ran BBPGETVD only the alpha numeric vendors records replicated down to SRM. The numeric were ingnored. The BBPGETVD t-code was reporting that the other vendors had incorrect data.
We then chnaged the AB Business Partner (vendor)number range to 000000001 - 999999999 and ran BBPGETVD. Only then did the numeric vendors get replicated down to SRM. But the issue is now, I cannot replicate the alpha numeric with out chaanging the number range back to A - zzzzzzzzz.
Question,
How can I set the Business Partner(Vendor) number range in SRM to anable the replication of both Numeric and Alpha numeric assigned vendor records down to SRM.
Thanks,
Grace

Christophe,
PLEASE HELP I HAVE AN URGENT ISSUE NOW!!!
On the subject of setting back the internal BP number range, does SRM expect it to be set for example to:
01 0000000001 - 0000999999?
Should the grouping for this internal number range be also ways set to 0001. Iam refernceing the settings in our sandbox client, they seam to be set up that way.
If its set to say 0003, will this cause a problem?
Because we have set all our BP ranges to external, any ORG unit, USER or position that we created after we "removed" the internal number range does appear to be working.
I have noticed this. when I login as a new user and try to create a shopping cart, tthe product category drop down does not work on the "new user".
If I go in the BP transaction and search for this new user or new unit org units that where created after the removal of the internal number range nothing is found!. The last internal BP number is 105.
Question.
If I set the internal number range back to
01 0000000001 - 0000099999 and set the current number to 106, then delete and recreate the org units, do you think this will work?
Please help I need to get this issue sorted out because as you said no new org unit/user can be setup.
Thanks Again.
Grace

Cannot open grooveshark due to a supposed problem loading flash. (I have the latest version of both (Mozilla and Flash)

Everything with firefox works ok except Grooveshark. An error message appears saying: We had problems loading flash, you might have any blocker etc etc.
I don´t have any blocker and as a matter of fact i have the latest versions for both mozilla and flash. Neither version of flash test nor reinstallation process nor checking add ons or firewall settings solved my problem.
Thanks for the attention. Regards

To double-check your Flash permissions for the site, you can click the globe or padlock icon to the left of the address, click More Information, then click the Permissions tab. The "Activate Plugins" section would be the one to check.
I understand you have checked your add-ons, but in case there is an unexpected interaction, could you test the page in Firefox's Safe Mode just to confirm that extensions are not the problem? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using either:
* "3-bar" menu button > "?" button > Restart with Add-ons Disabled
* Help menu > Restart with Add-ons Disabled
''Not all add-ons are disabled: Flash and other plugins still run''
After Firefox shuts down, a small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
Any difference?

Latest Flash version crashing both Firefox and IE

Hello.
Been using Flash in both IE and Firefox for years with no major problems until the last update a little over a week ago. Now, whenever I am watching video for more than about 5 minutes, the process for either browser's memory grows steadily way way up from where it normally is - and where it started (and where it used to stay) - and eventually crashes the player, the browser and freezes the entire computer. I have tried uninstalling and re-installing Flash and it hasn't helped. I stopped using Explorer a long time ago and switched to Firefox but went back and checked to see if it would be any different using that browser -figuring it might just be a Firefox issue, but the same thing happens. So I just downloaded Chrome and will try and see what happens with that - but am very troubled, since this has caused me great unhappiness and stress over the last week.
So the problems seem to be with 15.0.0.152 / 167
Any suggestions? Is this a known issue? Thanks.
Windows XP - all up to date. No other issues. System is fine. Have run all sorts of system checks and malware scans and it shows up clean.
Thanks again.

Same thing happens with Chrome. So all three different browsers - same problem with flash.
Was trying to watch a 4 hour long live stream of a game tonight - and needless to say, having to deal with a crash and have page file skyrocket every 5 minutes was not fun.

I've just downloaded trial versions of both lightroom and Photoshop and with it Bridge.. The output module seems to be missing from Bridge.. Is that just because its a trial version?

I thought i'd trial them first to see how stable they are [which isnt as good as I thought] and went to use the output section of Bridge only to find that its completely not there.
If its no longer part of the CC version, I'll stick to the version I have and not upgrade as its one of the main modules I use..

I've used contact sheets but preferred Bridge as it has the super-easy watermarking

In Firefox, I cannot access web links to PDF files. I'm told the browser isn't compatible. I have recent versions of both Firefox and Acrobat, and the pages open fine in IE.

Any website that send me to a .pdf file will not open if I'm using firefox. In order to print postage from usps.com, for example, an Acrobat window has to open, and it won't.

Pat, thanks for your reply. I finally had some time to look further into this problem and still trying to figure out. First to answer your questions:
what is your operating system & version? Windows 7 Professional
on what browser(s) does that happen? Google Chrome, Firefox, IE
does it happen for any PDF link, e.g. this? Yes, any link with a pdf extension
does it still hapen with the latest Reader version 10.1.4? Yes, just downloaded it last week and still the same.
Another thing I noticed is afer unsuccessfully trying to access the pdf link, the resulting blank page reads "Could not load Adobe Acrobat" (could not load plug-in).
I do have Adobe Creative Suite 3 installed, which of course provides for Adobe Acrobat; I'm not sure if there is a conflict there, but I might uninstall everything and then just try with Adobe Reader to see from there.
I hope some of this helps. I appreciate your efforts in trying to assist.
Cheers,
Vinnie.

I just bought an ipad air and the versions of both itunes and icloud on it are too old to be able to restore from backup. why would apple do this if it is not supported???

should I set it up as a new device?

I haven't done it. But if you set it up as new, just long enough to be able to update the operating system. Then go in and 'erase all content and settings'. This puts your iPad back to its out of box state, just not the operating system. You can then set your iPad up again, but this time you restore it from the backup of your old one.

PO Ammendment and version number

Dear Experts,
We have version management active at out client.
When we save the PO after changes version number is generated and changes are saved against that version number.
We want the report where we can see the Ammendment details in the PO , that is changes thet were made in that particular PO.
What are the tables and which are the fields where we can find these details.
Is there any standard report available where i can see those changes in PO.
Pl. guide.
Best Regards,
Vikram

Hi
I dont think standard report is there to show versions created in purchase orders.
You can use the table EREV, doc type F which shows version numbers with status active or completed..
Thanks

JSP and Servlet Version Number

Dear all:
Does any one know how to find out the version number of JSP and servlet. I am currently using IBM WSAD as development tools.
Thanks for your attention.

The web.xml would also help. Look at the dtd/schema definition in web.xml -
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app
     PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
    "http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>.....indicates servlet 2.3 specification (jsp 1.2, j2ee 1.3)
where as
<?xml version="1.0"?>
<web-app xmlns="http://java.sun.com/xml/ns/j2ee"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd"
    version="2.4">indicates servlet 2.4 spec (jsp 2.0, j2ee 1.4)
cheers,
ram.

MM Material Code "Numeric or Alphanumeric"

Dear Experts,
I'm new to SAP MM and was earlier working on Oracle ERP. As a team member, it's entrusted upon me to decide whether the material coding has to be numeric or alphanumeric. Client is insisting on "Alphanumeric" where as I perfer "Numeric" coding methodology.
You all, out of your experience with SAP and the issues related with numeric and alphanumeric system, kindly list out the PROs & CONs of both the systems. Also indicate your preference out of the both options.
Enjoy SAP
Sangmesh

Hi,
See if you have a Rubber Material you can use it As RUB01 but you need to be so clarified for your users so that they cannot use it anywhere it must be in a limit way.
in SAP we can maintain different no. range for Different material types. So that your usage problem might get solve with different no. ranges. like for RAW material of Rubber you can maintain it as per your requirement but for Semifinisahed goods we can maintain as per stages of that material in production..
same for all types as per the requirements and it will be more useful in Displaying the data to Client.
try your end.
Regards,
Ninad

How to get extension version number to update in exchange panel.

I was able to upload my Illustrator extension, set it to private and share it. Brialliant functionality. Now I have released a point update, and although it shows the correct version in the extension details on the Adobe Exchange website, the version number will not update in the panel itself, although my description modifications update just fine. The extension as shown in the "Not Published" list of the sight has the old version number. When I click on it to get to the main extension page, it shows the correct version number in title and in also correct in the details on the right. It does say "(Preview)" after the name. I don't intend to ever sell it, but want to keep sharing it privately. How do I get it to recognize version updates?
Thanks

Hi there,
It sounds to me like the reason your new patch (with the updated product version) is not showing in the panel is that it has not been "published". If it's showing up in the "Not Published" screen, this means that it's only available for you personally to make changes to in the producer portal - once you're finished making your changes (uploading a new ZXP etc.) you need to click Submit (with Auto-Publish) to make the new version go live to the people it's shared with (and show up in the panel). As long as the product is set to Private, clicking Submit (with Auto-Publish) will not make the product available publicly - it will continue to be private, visible only to the groups you specify.
Fraser

My PC crashed with both CS6 and Lightroom 4. .

My PC crashed with both CS6 and Lightroom 4. . .I purchased a Mac Pro. Can I download the Mac versions of both programs and use my currenct serial numbers?

You can with Lightroom, but not (as far as I know) with Photoshop. You ought to get in touch with Adobe's customer service people and see if you can "sidegrade" to Mac for a relatively small fee.
Hal

FaceTime is still not working for iOS 7 on both iPhones and iPads. Is apple doing anything to fix this week old problem?

FaceTime has not worked in a week for myself and many friends and family that all have the latest versions on both iPad and iPhone. I have tried all recommended fixes. Is apple doing anything to correct this problem?

No one knows... Apple has said nothing about the issue.
Tell them... http://www.apple.com/feedback/iphone.html

I updated my iPod and now, two movies, which were purchased in iTunes and have/show both HD and SD versions are no longer syncing to or playing on my iPod.

I updated my iPod and now, two movies, which were purchased in iTunes and have/show both HD and SD versions are no longer syncing to or playing on my iPod.

Which version of iTunes are you using?
What is your iPod firmware number as shown in the iTunes summary page?
Is there any error message when you try to sync the vidoes?
Have a nice day!

Time_building_block_id and object version number

Hello,
could someone help me out with an explanation how the time_building_block_id and object version number to be interpreted?
Are these independent? What actions create new ID and new ovn?
My first idea was that one ID can have different instances in the table with different object version numbers. However I found cases belonging to the same parent buildingblock where both the id and ovn are different.
So based on this only one of the columns could be primary.
However for the joins both are used typically at the same time, suggesting that the two together constitutes a primary key.
Are the DETAIL level records belonding to the same DAY level record to be treated as co-existing entries and their measure to be summarized? Or only the latest (bigger ovn?) to be considered, so it is an updated version of the record with the previous ovn?
thanks!

The version number in the TC Building blocks is used to identify changes to timecard building blocks. It is not the same as an object version number on a record in a table.
OTL keeps an audit history of all changes to the timecard, at whatever level they occur. It uses this in retropay processes to identify the 'true' hours to use.
TC Building blocks have a 'scope', for example there are building blocks at these levels:
Timecard
Period / Application
Day
Detail
If you entered 8 hours on a new timecard for Monday 07/09/09 it would create a building block record for that date and call it version 1.
If you later make a change to that DAY, OTL will create a new record with version 2. Say this one shows 7 hours.
OTL can then interpret this as -8 + 7 = -1 and make the appropriate adjustment.
Hope that helps explain it!
Regards
Tim

Version Number - Both numeric and alphanumeric

Similar Messages

Maybe you are looking for