Version number confusi

When I go to the Information section on my Zen Touch, it tells me the "Version" is 2.. When I press the tiny restart hole and press play to go the options like Reboot, Format All etc, it says "Creative Zen Touch v. 0.0.0". Is there an issue there? Also, can the 2. Zen Touch connect to an ME computer, or is it just XP?

Have you read this?  http://zone.ni.com/devzone/cda/tut/p/id/7060
I can tell you that your situation is not uncommon with TestStand.  The key is just doing it right the first time.  haha
#1- I doubt that this is possible because then TestStand would have to know every location of every .seq on the machine.  You will only see it when you open the sequence file.
#2- TestStand updates the version every time you change it.  You should get a message popup when you try to save that asks if you want to increment the version or not.  There's also a check box that says Remove Modified Mark From Types.  Look under Station Options in the File tab.  There are some settings there about Type conflicts.
#3- http://zone.ni.com/devzone/cda/tut/p/id/7910
http://digital.ni.com/public.nsf/allkb/4153576DA04BEB098625743D00704A09
Hope this helps,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

Similar Messages

  • Software version number confusion

    Just to confuse matters, this new AppleTV software is v4.2 (and not 4.3).
    It's based on iOS 4.3, but is referred to as v4.2 (2060) by the AppleTV.

    Chenks wrote:
    Just to confuse matters, this new AppleTV software is v4.2 (and not 4.3).
    It's based on iOS 4.3, but is referred to as v4.2 (2060) by the AppleTV.
    seems normal.
    from [this|http://www.macrumors.com/2011/03/09/apple-releases-ios-4-3-with-airplay-and-saf ari-improvements-personal-hotspot> article:
    Apple has also released an Apple TV software update known as iOS 4.3 Build 8F191m, although it it reportedly registering as software version 4.2 on Apple TVs themselves, similar to earlier versions where software version numbers have been one behind the corresponding iOS versions.

  • What is the current version number?

    Can you tell me what the current version number for
    acrobat.com is? One of my computers (XP Home SP3) shows version #
    1.2.443, but I just intstalled it on another of my computers
    (actually, it automatically installed with acrobat 9 I think) (this
    computer has XP Pro SP3) and the version shows as 1.2.443. I also
    have a third computer with version 1.1.377. So now I am really
    confused...I JUST installed acrobat.com o this computer, yet it has
    an older version than one of my other computers that installed it
    long ago. So here are my questions:
    1. Why would they have different version numbers (especially
    the one that was just installed that has a different version
    number)?
    2. What exactly is the most current version number
    3. How (or where) do I get the most current version?

    Hi Mickey71,
    Thank you for trying out Acrobat.com! We hope you like it!
    What you're seeing is the AIR version number, rather than the
    Acrobat.com version number.
    Mine also shows version 1.2.443
    You ca get the latest Acrobat.com AIR version
    by
    clicking this link
    Acrobat.com on the web, IS the most current version, right
    when you visit Acrobat.com. So there is no need to go "get" the
    latest version
    Since the AIR application accesses the Web Acrobat.com, it
    will include most updates that make it to the Acrobat.com services.
    Hope this helps!
    Pete

  • OID 10gR3 full version number and compatibility

    I am a bit confused about the OID version and compatibility. Can anyone help?
    Siteminder r12 is compatible with OID 10gR3 as per Siteminder compatibility matrix.
    When I try to find OID version number and in turn its compatibility with Operating system and database, I am finding it hard to understand which version I should be looking for when I want to use OID 10gR3 (e.g. is it 10.1.4.0.1 or 10.1.4.1 or 10.1.4.2 etc)
    There is no clear documentation providing this information. From one of the documents (www.oracle.com/technology/.../internet_directory_wp_10gr3.pdf) it seems it is 10.1.4.2
    However when I goto download site it only has 10.1.4.0.1.
    Also, as per certification matrix of OID 10.1.4 it says it is compatible with OEL5, whereas after downloading 10.1.4.0.1 it fails to install complaining that it needs Red Hat Linux 3 or 4.
    Need you help to understand this.
    Thanks,

    The Base line version is 10.1.4.1.0, all others are patches. The latest being 10.1.4.3.0, which can be downloaded via MOS (formerly known as Metalink).
    10G release 3 is marketing speak; 10.1.4.1 thru 10.1.4.3 are all 10G Release 3 (but different patchlevels. Guess you can speak of OID 10G release 3 patch 2, when you mean OID V10.1.4.3.0 - technicians tend to use versions).

  • PO Ammendment and version number

    Dear Experts,
    We have version management active at out client.
    When we save the PO after changes version number is generated and changes are saved against that version number.
    We want the report where we can see the Ammendment details in the PO , that is changes thet were made in that particular PO.
    What are the tables and which are the fields where we can find these details.
    Is there any standard report available where i can see those changes in PO.
    Pl. guide.
    Best Regards,
    Vikram

    Hi
    I dont think standard report is there to show versions created in purchase orders.
    You can use the table EREV, doc type F which shows version numbers with status active or completed..
    Thanks

  • Version number conflicts with NI custom data types

    Custom data type version number conflicts
    Options
    Mark as New
    Bookmark
    Subscribe
    Subscribe to RSS Feed
    Highlight
    Print
    Email to a Friend
    Report to a Moderator
    07-11-2011 08:10 AM
    I am new to Teststand software interface.  While doing my first software release under the guidance of a more experienced colleague, we discovered that Teststand will not run if it detects version number conflicts between custom data types on my machine vs. the production test machine.  I verified differences between all .seq files in my test program directory, but I did not realize that the version number difference exists in the StationGlobals.ini file, which is stored in a different location.  After discovering this, I modified the version number in one of the files.  However, two releases later, I discovered that the version number mismatches in another two files.  This raises several questions for me :
    1.  Is there a way in Teststand to view all the .seq files where a custom data type is used and then change its version number in one attempt?
    2.  Under what instances does Teststand upgrade the version number of a custom data type?
    3.  Are there any tools or scripts within Teststand that can allow the version number of custom data types to be changed in all .ini files when a difference is discovered between the current production test station settings and a new release?
    Please help.

    Have you read this?  http://zone.ni.com/devzone/cda/tut/p/id/7060
    I can tell you that your situation is not uncommon with TestStand.  The key is just doing it right the first time.  haha
    #1- I doubt that this is possible because then TestStand would have to know every location of every .seq on the machine.  You will only see it when you open the sequence file.
    #2- TestStand updates the version every time you change it.  You should get a message popup when you try to save that asks if you want to increment the version or not.  There's also a check box that says Remove Modified Mark From Types.  Look under Station Options in the File tab.  There are some settings there about Type conflicts.
    #3- http://zone.ni.com/devzone/cda/tut/p/id/7910
    http://digital.ni.com/public.nsf/allkb/4153576DA04BEB098625743D00704A09
    Hope this helps,
    jigg
    CTA, CLA
    teststandhelp.com
    ~Will work for kudos and/or BBQ~

  • The same Object Version Number for the same person id multiple times

    Hello all,
    I am currently facing an issue with HRMS tables and the object version number for employees. I am trying to write a report but due to the same object version number for the same person appearing in several row i am getting duplicate information. For example,
    person id 91 object version number 32 is on 4 rows and i have no idea why...help please guys, I'm at a lost so far 50 people are facing the same issue.

    Hi Baal666bobo,
    The person table is date-tracked, so the PK has effective start and end dates as well.
    Get the correct record with sysdate(or any particular date) and then check the OVN.
    Cheers,
    Vignesh

  • Where is the EXACT version number shown?  Where is the menu link to the Help file?  Why is there no scroll bar?  The new iTunes is terrible in more ways than I can list... how do I switch back to version 10?

    The newest iTunes version has no Help option.  Why?  And, no ability to find out the version number.
    The new iTunes, when in album view in Windows 7, has NO SCROLLBARS, so it is impossible to scroll the albums.  Why?
    Answer these questions, as I am an AAPL shareholder and I am NOT happy with these and other changes you've made to iTunes.

    The newest iTunes version has no Help option.  Why?  And, no ability to find out the version number.
    You may need to bring up your Menu Bar to see the Help menu.
    If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
    Once you've got your Help menu showing, go "Help > About iTunes" and wait for the version number to scroll up from the bottom of the screen, as per the previous versions.

  • How Do I Find Out a Folio Version Number

    Hi Guys,
    So far, everytime I have submitted a folio to the App Store, I have received a variation of the following error:
    Version Mismatch - Neither CFBundleVersion ['3.4.2.9.91210'] nor CFBundleShortVersionString ['1.0.8'] in the Info.plist match the version of the app set in iTunes Connect ['2.0'].
    I'd like to be able to put the correct version number into iTunes Connect when I upload the App, but how do I find it? Where is the CFBundleShortVersionString for each folio located?
    Cheers
    Chris

    It isn't necessary to change that number—Apple is just giving you a housekeeping warning—but if you really want to edit the version number in iTunes, you can find it in DPS App Builder.

  • How can I set a version number for an AppleScript application?

    Subject kind of says it all... I've written a small application in AppleScript, which is used on several computers. I'd like the application to have a version number, just like normal applications have. How do I give it one?
    To be clear, what I mean is: in column view, if you click once on an application, it shows the icon, name, size, version, etc. of the application. I want a version number to show up there (and in the Get Info window, etc.)

    Posting to this old post, but I am trying above method on my 10.8.2 machine and it doesn't seem to work.
    I added the bundle version string as in the attached image.
    Recompile my app, saved it but still version info doesn't show up in finder.
    Also, tried to change "Bundle version" to "CFBundle version". But still didn't work.
    Any suggestions?

  • I have never had to enter a password to access mail. However, recently, I keep being asked for password on my ****** address. Only on my macbook. (which, btw, has a version number the drop down doesn't offer as a choice. I had to putt 9.4)

    I have never had to enter a password to access mail.
    However, recently, I keep being asked for password on my ***** address.
    Only on my macbook. (which, btw, has a version number your drop down doesn't offer as a choice. I had to putt 9.4)
    When I look up the account the "password" is a long string of gobbledygook. Something I would never do.
    But when I attempt to use that pw I still can't get in.
    I have no trouble accessing that email account on my mac mini. Just on the macbook.
    <Edited by Host>

    Maiko,
    I'm confess I'm still trying to get a handle on your problem. You do a fantastic job of describing it ... but I'm just trying to picture it accurately in my head.
    I think, were I in your shoes, I'd begin by looking at what the debug page has to say for the specific destination in which you're interested in fixing. In other words, I'm not clear on where, exactly, this destination points ...
    Destination illinois.edu.1945806043
    Is that your site, or the division within your site that you want to fix? "Normally", you do not need to specify a site handle to get to your site within your transfer CGI ... if you say "uillinois.edu", it's enough to transfer your users to iTunes U ... but every site still has a handle, and you could, if you wanted to, actually specify it in your transfer CGI. For example, this:
    Destination uic.edu.1139051993
    is for my entire site ... it's my site handle. Whereas this:
    Destination uic.edu.1991288441
    is for a division within my site ... but it's impossible to tell the difference between "site" and "division" from just the handle (I mean, if I didn't say "this is a site" and "this is a division", there'd be no way for you to know). So when I look at your creds and permissions on your debug page, I can't quite tell if they give you download access for your site, or for the specific division you want to fix. If you could open the debug page with your division as destination (or confirm that that's what we're looking at), it'd rule out some things.

  • PO Version Number not available in PO List displays (ME2L, ME2K, etc)

    I have configured PO Version Management. My PO's are working as desired with proper output.
    However, the PO Version Number is not displayed in my PO List Display tcodes (ME2L, ME2K, etc) nor is it available to add to the layout.  I have configured the Scope of List for "BEST" (PO's) to include change documents. However, there is nothing when I go to ME2L for a PO that has 15 versions. I have verified that EKKO does contain the latest version number for this PO.
    Have I missed a config step??

    Thank you - I did post in MM once I realized I posted in SRM.
    I realize that only the current version is displayed in these transactions. But I need to see the actual version number - no the history - just the current version number. We use these reports to supply our Internal Auditors with PO Data and they require to see the PO # and Version # without having to actually pull up each PO individually in the system.
    I had assumed that since they use EKKO and EKKO contains REVNO that REVNO would be available in my layout and I could simply add it to the report. However, this is not the case.
    Thanks,
    Tonia

  • Version number in Print Out of PO

    Dear All,
    We are using the standard output for the print out of PO.Version number is not coming in that printout.Anything has to be enabled to get it in the print out.
    Regards,
    milton.I

    Dear Vijay,
    Have you made version management active for your document type?
    SPRO- MM- Purchasing - Vertion Mgmt
    SPRO- MM- Purchasing - Messages - Mtypes for PO - then maiatain your document type for the change ( 2) operation.
    After every version is created then take print-out.
    In the print out after the PO number you will get the version number.
    Thank you,
    Krishna Reddy
    Thank you
    Krishna Reddy

  • Database Version number 9.2.6 or 9.2.0.6

    Can any one please tell me the detailed Database version numbers for Oracle 8i and Oracle 9i.
    is there any database version available with version number 9.2.6. but i think 9.2.0.6 is only available.
    what are all the patches required for upgrading oracle 8i to oracle 9.2.0.6

    Hi,<br>
    <br>
    To explain the Oracle Release Number, I advise you to read Oracle release<br>
    9.2.6. but i think 9.2.0.6 is only available<br>You're right, 9.2.6 doesn't exists. But 9.2.0.7 is available for some plateform.<br>
    And to migrate from 8i to 9i, you can directly migrate, but depend of 8i version. Read Upgrade Guide<br>
    <br>
    Nicolas.

  • How do I make my iPhoto Library's version number appear in the Get Info window?

    I recently (within the past 2 weeks) purchased a new 27 inch iMac and have been importing data (applications and files) from my 2010 Macbook Pro via AirDrop.  One of the first files I migrated over was my iPhoto Library.  I doing so, I noticed a few differences between its file attributes and those of the iPhoto Library file created by default on my new computer - two of which I'll note here.  First, I noticed that the file resident on my new OS was labeled iPhoto Library.photolibrary while my older version did not have the ".photolibrary" extension.  That seemed simple enough to correct so I added that extension to my old library file.  The second difference I'd note - and the source of my question - is that the default iPhoto Library file displayed a version number (9.5.1) in its "Get Info" window, while mine did not.  I checked my file's info.plist file and the correct information seems to be listed.  It reads (in part):
    <dict>
                   <key>CFBundleGetInfoString</key>
                   <string>iPhoto Libary 9.5.1</string>
                   <key>CFBundleShortVersionString</key>
                   <string>9.5.1</string>
    </dict>
    </plist>
    I'm not sure this is really a question for the iPhoto community, as it seems like a more general issue; but, this is my first post to these forums, and I didn't know where to start.  Thanks in advance for the advise/suggestions.

    In terms of the info.plist file, I only reviewed it to see why I wasn't seeing the version number in the GetInfo window.
    The string "<key>CFBundleGetInfoString</key>
                   <string>iPhoto Libary 9.5.1</string>"
    is exactly what will be shown in the Get Info panel. I tested that by simply editing this string in a test library using XCode. I could "Get Info" to show ridiculous versions numbers this way.
    However, none of my older iPhoto libraries will show the version string in Get Info, only libraries I created with iPhoto 9.5.1. or Aperture 3.3 or later.
    There is probably one of the other database files in the folder "database" - *.appdb and *.db  interfering.  None of the Library First Aid options did make the version number show for my older iPhoto libraries - not even rebuilding the iPhoto library. The only way I could make the version number show in "Get Info" was by exporting the library as a new library using Aperture. But this exported library is now showing as Aperture library.

Maybe you are looking for