Version number incorrect in .exe file properties

Just reporting a little glitch in version 9.3.4, just installed here. When I run the program, "Help; About" says that it's version 9.3.4 as expected. But the version number reported in the properties of AcroRd32.exe is still 9.3.3.177

snofriacus wrote:
Just reporting a little glitch in version 9.3.4, just installed here. When I run the program, "Help; About" says that it's version 9.3.4 as expected. But the version number reported in the properties of AcroRd32.exe is still 9.3.3.177
Agreed. Software compliance scanning systems (like Retina) are scanning to make sure that the exe file was updated from 9.3.3 to 9.3.4. Since the expected file was not updated, it beleives there's still an open vulnerability and flags the system as non-compliant (which in very strict IT/system environments can cause the users computer to be taken off-line until it is remediated).
--KC

Similar Messages

Define a version number for a chm file

I need to fix a version number in a chm file to determine
wich version a customer uses. At this moment I distinguish them by
chm's content, but I'm not happy for this choice.
Is this possible?
Thanks.
Raffaele.

Hi rdinatale
Another thing you can do is to simply edit the Window
properties to include the version number. Of course, this too would
need to be done each time you update the version. But once it was
done, it would show up in the title bar of the .CHM.
Just a thought... Rick

Get "EXE File properties"

I would like to get the follwing "File properties" from an EXE File
- Original Filename
- File version
like if you "right klick" on a EXE File and than
klick on "properties".
How can I get these information with JAVA.
thanks
Aykut

Hmmmmmm I doubt you would find a specific example using JNI for what u asked....so do a search for JNI on here.
Then I would look at microsoft.com to see what API functions are used to get the information you desire.

Old version Source code to .exe file conversion

I have a programming GUI source code (written in an older version of LabVIEW). Can it be supported by LABview Evaluation version 10.0.1 and be converted to an .exe file. How can I convert and use source code file for programming? What do I need to convert and how?
I'm new to LABview. Please help!!

2010 can open VIs written in LabVIEW 6.0 or newer. Just double click on the top level VI. You will also need to install any hardware drivers (i.e. GPIB, DAQ, etc) that the old program used.
With the evaluation version, you can create an exe but it will have a watermark on the front panel.

Could I use full development version to make a .exe file?

Hi...
I am using a full development version LV 8.0 to program now.
The problem is obviously I do not have application builder to create the .exe file of my program.
Is there any other way to solve this problem with my current version?
Or is it possible to use the other language to handle it?
Thank you!

You can buy the app builder as an add-on. You can pay someone with the app builder to build one for you. Probably won't be too expensive for a one-time deal but it would be harder for you to support it. It's possible to create a "loader" program that will run a VI. If you can get someone to build the loader program, you can then distribute your application as an llb. There is no other way.
"the other language"? What other language?

Include metainformation (My version number) into a java class file???

Hy
It is possible to include metainformatins like the versions number to a java class file?
I think at the way of the VB6 programmers. The generated exe file contain a rigth click menu (Win Explorer) which shows the mettainformations from the developer (copyright, author, version number of the class file).

The windows version info is specific to windows compound files, where the info is incuded as part of the file. Java is platform neutral, and doesn't support windows binary specific metadata (just like you can't add version info to a text file in windows). Other os's allow metadata that is seperate from the binary format of the file, so do not suffer from this limitation.
Distributing your jar as a self extracting exe for windows will allow this info to be added.
Pete

Class file minor version number

I installed JDK 1.5.0_15, was previously on 1.5.0_06. It looks like the minor version number in the .class files didn't change - in fact, both have zeroes.
The first 8 bytes under both contain: cafe babe 0000 0031

I'd say it's because the major and minor version number in the class file refers to the structure of the class file, ie. it's a version number of the class file format not of the JDK that created it.
The format hasn't changed between those JDK releases... so the version numbers stay the same.
regards,
Owen

Version number for GPO's not in sync with the version number for GPO's on the Baseline domain controller

Hi
I accidentally removed one of our domain controller's hyper-v image (DC-02) from the hyper-v manager and to bring it back online launched a new virtual machine using the same virtual hard drive. This brought back the domain controller machine and I set the
original IP address to the same assuming that everything would just working fine.
Sadly, that wasn't the case as when I tried to open the group policy manager on that machine I started getting "Access is denied" error. I was then presented with an option to open the group policy manager with the first available DC which I did
and was able to open it with showing the same machine as the baseline domain controller under the status tab (DC-01 is actually the baseline DC). I then clicked Detect now and noticed it was showing 1 DC under replication in progress with problems in GPO version.
I then did the same thing on the primary DC (DC-01) and even there it was showing this only (images attached).
So I started exploring over the internet going through various articles but couldn't find a solution which I could apply without worrying about corrupting something somewhere. I also went to the SYSVOL folder on both the DC's to check the version number
in GPT.ini files which are mentioned below:
\\CC-DC01\sysvol\cloudchowk.lab\Policies\{6AC1786C-016F-11D2-945F-00C04fB984F9}
[General]
Version=3
\\CC-DC01\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}
[General]
Version=5439513
\\cc-dc02\SYSVOL\cloudchowk.lab\Policies\{6AC1786C-016F-11D2-945F-00C04fB984F9}
[General]
Version=3
\\cc-dc02\SYSVOL\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}
[General]
Version=5308439
Could anyone please help me sort this out? I am no system admin and whatever knowledge I have of setting up DC, AD etc is from following one article or the other over the internet.
Regards
Sajat Jain

Hi
Apologies for responding late. I followed through all the points mentioned by Frank and even did a non-authoritative restore synchronization but still no luck.
I am attaching the output from the dcdiag /q and the from the event viewer after doing to non-authoritative restore synchronization.
DCDIAG /Q
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... CC-DC03 failed test DFSREvent
Unable to connect to the NETLOGON share! (\\CC-DC03\netlogon)
[CC-DC03] An net use or LsaPolicy operation failed with error 67,
The network name cannot be found..
......................... CC-DC03 failed test NetLogons
An error event occurred. EventID: 0x0000164A
Time Generated: 01/18/2015 17:52:17
Event String:
The Netlogon service could not create server share C:\Windows\SYSVOL\sysvol\cloudchowk.lab\SCRIPTS. The following error occurred:
An error event occurred. EventID: 0x0000164A
Time Generated: 01/18/2015 17:54:12
Event String:
The Netlogon service could not create server share C:\Windows\SYSVOL\sysvol\cloudchowk.lab\SCRIPTS. The following error occurred:
An error event occurred. EventID: 0x00000422
Time Generated: 01/18/2015 17:54:41
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\cloudchowk.lab\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
An error event occurred. EventID: 0x00000422
Time Generated: 01/18/2015 17:55:42
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\cloudchowk.lab\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
An error event occurred. EventID: 0x00000422
Time Generated: 01/18/2015 17:59:41
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\cloudchowk.lab\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
An error event occurred. EventID: 0x00000422
Time Generated: 01/18/2015 18:04:42
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\cloudchowk.lab\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
An error event occurred. EventID: 0x0000164A
Time Generated: 01/18/2015 18:05:10
Event String:
The Netlogon service could not create server share C:\Windows\SYSVOL\sysvol\cloudchowk.lab\SCRIPTS. The following error occurred:
An error event occurred. EventID: 0x00000422
Time Generated: 01/18/2015 18:09:42
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\cloudchowk.lab\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
An error event occurred. EventID: 0x00000422
Time Generated: 01/18/2015 18:14:42
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\cloudchowk.lab\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
An error event occurred. EventID: 0x00000422
Time Generated: 01/18/2015 18:19:43
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\cloudchowk.lab\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
An error event occurred. EventID: 0x00000422
Time Generated: 01/18/2015 18:24:43
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\cloudchowk.lab\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
......................... CC-DC03 failed test SystemLog
EVENT VIEWER LOGS
The DFS Replication service initialized SYSVOL at local path C:\Windows\SYSVOL\domain and is waiting to perform initial replication. The replicated folder will remain in the initial synchronization state until it has replicated with its partner CC-DC01.cloudchowk.lab. If the server was in the process of being promoted to a domain controller, the domain controller will not advertize and function as a domain controller until this issue is resolved. This can occur if the specified partner is also in the initial synchronization state, or if sharing violations are encountered on this server or the synchronization partner. If this event occurred during the migration of SYSVOL from File Replication service (FRS) to DFS Replication, changes will not replicate out until this issue is resolved. This can cause the SYSVOL folder on this server to become out of sync with other domain controllers.
Additional Information:
Replicated Folder Name: SYSVOL Share
Replicated Folder ID: 4689406D-D6D8-49E0-8079-2B1D4AE61BC6
Replication Group Name: Domain System Volume
Replication Group ID: 6B162096-2EFA-4D4C-BF13-62CC5B112B97
Member ID: 566943F9-D2FB-4304-823D-10DC972F831A
Read-Only: 0
Should I just start over again by removing DC03 and setting up another DC?
Regards
Sajat Jain

Display SharePoint Version number in Excel

I have managed to display the SharePoint Version Number in Word 2007, using the label and the Document Management Policies in SharePoint. Now I am looking for something similar in MS Excel 2007, allowing me to automatically display the current version number
of the Excel file somewhere inside the document.
The idea is to always have an up to date version number on any printout of an Excel file, so that we can control our documents better. While I managed to display the number through the "Quick Parts" tool in Word, I cannot see anything similar in Excel.
Any ideas on how I can achieve this?
Thanks for the help.

Firstly on the SharePoint document library create a custom column called SPVersion. A custom workflow will then be required to copy the SharePoint version number into the SPVersion column when an item is updated or added.
Start Excel and from the quick access toolbar, select More Commands. Then from the left navigation, choose Popular and ensure that 'Show developer bar in the ribbon' is selected. Click OK. Now open the Excel and save the file as a Macro Enabled Excel
Workbook. From the developer ribbon, click on 'View Code'. Right click on Microsoft Excel Objects and click on Insert > Module. Paste the user defined function below into the module:
Function SPVersion()
Dim wb As Workbook
Set wb = ThisWorkbook
For Each prop In wb.ContentTypeProperties
If prop.Name = "SPVersion" Then
SPVersion = prop.Value
End If
Next prop
End Function
Now return to the Excel sheet and enter the function =SPVersion in any of the Excel cells to display the SharePoint version number.

Java error message - Bad version number in .class file

I get the error noted below in Safari, Firefox, and Chrome when I try to view java containing web pages.
Specifically this page: http://aviationweather.gov/adds/tafs/java/
My Java Preferences are as follows
My OS is 10.5.8
Thanks!
Java Plug-in 1.6.0_26
Using JRE version 1.5.0_30-b03-389-9M3425 Java HotSpot(TM) Client VM
User home directory = /Users/ernest
c:   clear console window
f:   finalize objects on finalization queue
g:   garbage collect
h:   display this help message
l:   dump classloader list
m:   print memory usage
o:   trigger logging
q:   hide console
r:   reload policy configuration
s:   dump system and deployment properties
t:   dump thread list
v:   dump thread stack
x:   clear classloader cache
0-5: set trace level to <n>
java.lang.UnsupportedClassVersionError: Bad version number in .class file
    at java.lang.ClassLoader.defineClass1(Native Method)
    at java.lang.ClassLoader.defineClass(ClassLoader.java:676)
    at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
    at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.ja va:25)
    at java.lang.reflect.Method.invoke(Method.java:592)
    at sun.plugin2.applet.Plugin2ClassLoader.defineClassHelper(Plugin2ClassLoader.java :1014)
    at sun.plugin2.applet.Plugin2ClassLoader.access$100(Plugin2ClassLoader.java:69)
    at sun.plugin2.applet.Plugin2ClassLoader$2.run(Plugin2ClassLoader.java:991)
    at java.security.AccessController.doPrivileged(Native Method)
    at sun.plugin2.applet.Plugin2ClassLoader.findClassHelper(Plugin2ClassLoader.java:9 55)
    at sun.plugin2.applet.Applet2ClassLoader.findClass(Applet2ClassLoader.java:134)
    at sun.plugin2.applet.Plugin2ClassLoader.loadClass0(Plugin2ClassLoader.java:250)
    at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Plugin2ClassLoader.java:180)
    at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Plugin2ClassLoader.java:161)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
    at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Plugin2ClassLoader.java:675)
    at sun.plugin2.applet.Plugin2Manager.createApplet(Plugin2Manager.java:3046)
    at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Plugin2Manager.ja va:1498)
    at java.lang.Thread.run(Thread.java:655)
Exception: java.lang.UnsupportedClassVersionError: Bad version number in .class file

Hi, thank you for the reply. However, java is definitely enabled on my computer, on all my browsers. In fact, if I go to the SUN website and run the java test, I get that all is OK.
I think it may have something to do with the .class (maybe in .jar-file) compiled with a higher version of java than the virtual machine trying to run it.
The example I found (google search) is .class-file that is compiled with JDK 6 and I am trying to run it with 1.4 JVM.
There is some software error going on somewhere... but I do not know enough to fix it.
Many thanks for all your help

How to read the product version number of the installer properties programmatically

In my application (.exe) I want to read the product version number
(e.g. 1.0.9), which I entered in the application builder. (Installer
Settings -> Properties). Is that possible with LabVIEW? The revision
number of the VI doesn't help me much, because it is increased each
time I save the VI.
Thanks for answers
Dave

The verison number you entered in the application builder (Installer Settings -> Properties) is the version associated with the installer not the exe.
One way to keep track of a version associated with a LV exe is to include a subVI in your exe that stores and returns this value. You'd just have to update it yourself before building your exe.
Deborah

How to read the product version number of the installer properties programmatically

In my application (.exe) I want to read the product version number
(e.g. 1.0.9), which I entered in the application builder. (Installer
Settings -> Properties). Is that possible with LabVIEW? The revision
number of the VI doesn't help me much, because it is increased each
time I save the VI.
Thanks for answers
Dave

I found it... Here:
http://forums.ni.com/ni/board/message?board.id=170&view=by_date_ascending&message.id=183843#M183843

I need to de-install Foxfire 6 and go back to Foxfire 5 on my Mac to run a picky program that won't run under Foxfire 6. I can't get install software for version 5 to run. It sees it as exe file.

When I drag the downloaded Foxfire 5 install file to my Applications folder, it shows up as an .exe file. When I double click to run it, I get an error message saying it is not DOS executable.

In the exact same boat here. Life-long iPhone user. Got a 6 on Tuesday and absolutely hate it to the point where I dread using it. Upgraded from an iPhone 4 I'd had for 4+ years. After making several phone calls, my understanding is that Apple will take it back no problem, within 14 days. My iPhone 4 was out of contract with AT&T but when I bought the 6, I renewed my previous contract for 2 years. My AT&T contract also has a 14 days, cancel for any reason with no early termination fee, clause. I assume your AT&T contract would have the same. But I don't think you need to worry about canceling your contract. Since you still have your iPhone 5, you should be able to bring it to the AT&T store, have them switch the existing contract from the 6 to your old 5 and then you can go return the 6 to the Apple store where you bought it. That's no different than being halfway through a two year contract, your phone is stolen and you have to buy a new one at retail price to replace it on your existing contract. You're essentially just bringing your own device you already paid for (the 5) to the existing AT&T plan.
I would just caution that assuming you want to keep your phone number, get the service put back on your 5 at AT&T and have them deactivate the 6 before you go return the 6. Or just make sure the Apple store is capable of transferring the service from the 6 back to the 5 while you're there to do the 6 return.

Having trouble installing my licensed LR 5 on a new computer. I have .exe file and also license/serial number. but I am asked only to buy or try.

Old computer died, and I am trying to install LR 5.5 on my new computer. I have run the exe file and have moved all my picture files and the LR data base files to the new computer. When I try to open the program (it is listed in my start menu and is in my system tray, too) a window opens that already shows as selected the option saying I have a license, but there is no way of going forward from that window. I could choose buy or try out or cancel. I'm obviously missing something here and would appreciate any help. Should I perhaps run the exe of LR 5 and then do updates to get to 5.5?
I have checked my Adobe account and LR5 shows as being owned by me. I have NOT downloaded the CC version of LR. I am running Win 7, 64-bit.

Just FYI, apparently, running LR 5 exe works as we would have expected, and
the link to update to 5.5 comes right up when the program is opened. Takes
some time, of course (and wants to create a new catalog as well), but it
does work.
G

Where can I download full version of photoshop i.e. iso or exe file from Adobe?

Where can I download full version of photoshop i.e. iso or exe file from Adobe?
I am planning to install it on multiple PC and I don't want to download it everytime
Thanks

you can only activate your adobe single user license products on (at max) two computers concurrently.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Version number incorrect in .exe file properties

Similar Messages

Maybe you are looking for