Version of kernel installed doesn't match what's running

This seems to me a very newbish question... I've just run `sudo pacman -Syu` to upgrade my system, and it seemingly went fine. When I reboot, the list of running kernel modules is much much smaller, the text on my screen is much bigger (suggesting a video driver switch?) and the kernel seemingly hasn't upgraded (`uname -a` still reports 3.16.1-1, instead of 3.16.3-1). Anybody know what gives? It's probably a simple solution, but I can't figure it out... thanks for reading.

There are a lot of threads around here where that is the root cause of a lot of problems.   The most common reason for that is that your boot partition was not mounted at /boot when you did the update.  That means that your new kernel is in the directory /boot, but the kernel that was loaded by your boot loader is on your boot partition.
Look at /boot.
Mount the boot partition on /boot
Look at /boot
Did the contents change?  If yes, do a pacman -Syu and ensure that your /etc/fstab is configured to mount that partition by defualt
Edit:  Moving to Newbie corner
Last edited by ewaller (2014-10-06 00:08:54)

Similar Messages

  • In Max, click Test Panel - Get Executable version (7.1.1) doesn't match resource file (7.1)

    Hi,
    I haven't used LabVIEW for a while.
    I plugged in a USB-6251 and ran Measurment and Automation explorer and saw that the USB-6251 was in the NI-DAQmx Device and was green.
    I clicked on the Test Panels button and got a window with the message:
    Get Executable version (7.1.1) doesn't match resource file (7.1)
    When I clicked OK  MAX was locked up.
    I found this:
    http://digital.ni.com/public.nsf/websearch/680E61A4D02158A186256F7A0073C228?OpenDocument
    which told me to repair the LabVIEW Runtime thingy.  I did that and it's still broken.
    My MAX version is 4.2.0.3001
    I assume that's a pretty old version but I would have thought it should have been updated when I upgraded to LabVIEW 8.2.1.  But I don't see a MAX folder in the 8.2.1 install.

    I thought I had replied to this but somehow it didn't get there.  In answer to the question about running the device driver CD after installing LV 8.2 I don't know the answer. 
    Anyway I installed LV8.6.1 and now it goes into test panels OK so I should be able to progress.

  • I want to email a photo through iPhoto but it says I need a password... I entered my password but it says it doesn't match - what password do they want and how do I fix? (Facebook and other social media iPhoto posts work - just email asking for pass)

    I want to email a photo through iPhoto but it says I need a password... I entered my password but it says it doesn't match - what password do they want and how do I fix? (Facebook and other social media iPhoto posts work - just email asking for password)

    Your email password.
    iPhoto '11: Email your photos
    Open Mac Mail. From the Mac Mail menu bar click Mail > Preferences then select the General tab.
    Make a selection from the:  Default email reader   pop up menu.

  • Perl lib version (v5.8.8) doesn't match executable version

    >>
    23:20:50 -!- Irssi: Error in script adv_windowlist:
    23:20:50 Perl lib version (v5.8.8) doesn't match executable version (v5.8.7) at
              /usr/lib/perl5/5.8.7/i686-linux-thread-multi/Config.pm line 46.
    23:20:50 Compilation failed in require at /usr/lib/perl5/5.8.7/i686-linux-thread-multi/lib.pm line
              6.
    23:20:50 BEGIN failed--compilation aborted at /usr/lib/perl5/5.8.7/i686-linux-thread-multi/lib.pm
              line 6.
    23:20:50 Compilation failed in require at (eval 18) line 1.
    23:20:50 BEGIN failed--compilation aborted at (eval 18) line 1.
    23:20:50
    It worked before the new perl version.

    Recomplie irssi, that will solove the problem.

  • My automatic instal doesn't happen, what do I do?

    my automatic install of creative cloud setup exec doesn't happen what should I do?

    Try below mentioned link :
    WINDOWS:
    Click on the below link and download Creative Cloud setup file and use the same to install the Creative Cloud Desktop application.
    https://ccmdls.adobe.com/AdobeProducts/KCCC/1/win32/CreativeCloudSet-Up.exe
    MAC:
    Click on the below link and download Creative Cloud Installer file and use the same to install the Creative Cloud Desktop application.
    https://ccmdls.adobe.com/AdobeProducts/KCCC/1/osx10/CreativeCloudInstaller.dmg

  • HT5624 I am trying to reset my password for my apple id.  When asked I enter my date of birth and I am told it doesn't match what itunes has on file.  HELP!  I am not getting any emails to reset the id either.

    I am trying to reset my password for apple id.  I entered my d.o.b. tells me info doesn't match.  I tried reseting through email but am not
    getting any emails to reset it.  HELP!

    Go to the Apple ID Security site from http://support.apple.com/kb/HT5699 or call the AppleCare support number from http://support.apple.com/kb/HE57 and ask to speak with the Account Security Team...either can help you reset your questions/answers.

  • I re-installed Windows 7, and now itunes doesn't match what's on my ipod touch. How can I sync from the device back onto the laptop?

    I've lost all my playlists, and itunes has included all the albums from the My Music folder that were not included for reasons of space in the previous version. Is there a way that I can sync the ipod touch to itunes on the laptop---making the laptop agree with what's on the device? Thanks for your help.
    D. Bess

    Hello user!
    In afraid you can only transfer songs from your iPod if you use "Transfer purchases" on iTunes Menu> Device.
    This thing is better than move the folder from your device because iTunes use a different method to sync songs and app.
    Try it!

  • How do you install "Classic Mode"? The online guide doesn't match what I have?

    HI -- I have a MacBook Pro and need to install Classic Mode so my kids can play some of their games ... I looked online, got instructions to go to the disks that came with my computer and that Classic Mode would be there. But it isn't. What am I missing???

    There might be a terminology issue here.
    Classic is the ability to run OS 9 programs on PPC-based OSX computers.   It would not have been included with a MacBook Pro which runs an Intel processor.
    Rosetta allows an Intel-based computer to run PPC based *OSX* programs.  It will not allow you to run programs that required OS9.  This *is* included with your MacBook Pro.
    Are these OS9 (or below) games or PPC games for OSX?

  • My iTunes library doesn't match what's on my iPhone

    I wasn't sure if I should post this under iPhone or iTunes so forgive me if this is in the wrong place.
    Basically, there are discrepancies between my iTunes library and what's on my iPhone.  Yes, everything is checked and I know how to sync.  I also understand all the nuances of artist names, genres, etc.
    It appears that all of the music is there, but it doesn't all show up when sorting my artist, song or album.  Here are 2 examples:
    I have 2 Amy Winehouse records in my iTunes library; Back to Black and Lioness.  Both records are also on my iPhone.  However, when I pull the list of records by ARTIST only Lioness shows up.  To find Back to Black, I have to sort by ALBUM and then I can find it. 
    I have 4 Norah Jones records in my library; Come Away with Me, The Fall, Little Broken Hearts and Not Too Late.  All records are also on my iPhone.  However, when I sort by ARTIST only 3 of the records appear (the Fall is missing).  If I sort by ALBUM, it is there.
    These are 2 examples, but there are several more.
    This is very annoying because I can't always remember the name of records but I do remember the artist, of course.
    I have tried re-syncing.  I have looked very carefully at the artist name to make sure they all appear EXACTLY the same...they do.  No spaces, nothing.
    Any thoughts??  Thank you for your help!

    The missing Albums may be ones where the Artist is not listed as also being the Album Artist in the tag.  Try going to Settings>Music and turn Group By Album Artist to Off.  See if the missing albums now show in the Artist view.  If so, you can either leave the setting this way, or if you prefer it to be on, go to iTunes on your computer and put the correct name in the Album Artist field of the tag (on the Info tab of the tab) for the albums in question and sync your phone.

  • My iPhone doesn't match what I have in iTunes. My phone is what I want. How do I update iTunes? I did update and now they don't match. iTunes gives me the warnings that my phone is connected to another library. I don't have one. Any way to make iPhone ove

    My iPhone has all the data I want, but it isn't matching my computers iTunes suddenly? How do I get them to match?  I have more on phone than what is showing up in my iTunes. It is saying it is synced with another account which I don't have???? Help. I'm nervous I will lose, books,etc

    You can try following the steps in this article: https://discussions.apple.com/docs/DOC-3141.  Or, you could take a look at 3rd party program solutions such as this: http://www.librarytunes.com.

  • Output doesn't match what I built...

    Hey Thrillseekers....Project is HDV1080i 1440X1080
    Tried sharing as a quicktime and boy did that stink up the joint.  Looked like you were watching it through a wrinkled piece of privacy glass with rain falling on it.   And my soundtrack ended a minute before the video.  Weird.
    Tried sharing as a windows media file.  Looked a little better, but still pretty awful quality.  Also, there were two things thast looked pretty strange.  There were several placed where I'd zoomed in on an image, be it the background video or a still.  In the editor, it filled the frame, which I'd assumed was a Maximum of 1440X1080.  But in the output, the width seemed to have a set maximum but the height would display the entire height of the image when I'd zoomed in.  Some sections looked almost square?  Is there a way to limit the output to what I see in the editor?
    There are also severl placed where I'd cropped a still and had it pan across a scene that in the output were cropped differently.  For instance, there were a series of images that when stitched together would be a 180 degree panorama.  I had them all slide across the scene in a roughly stitched together format.  The output had all the stills panning across the scene, but there was a big gap between each still that shouldn't be there.
    Then I output it in flash, and it looks pretty good quality wise, but it still has the proportion issue and the cropping issue.
    I've ordered Steve's book, but I'd sure like to put this thing to bed without having to wait for the book.
    Any ideas?
    Windows 7 64 Bit Is the OS if htat helps.

    Hey, thanks for supporting the book, Andy!
    I'm just not sure I have quite enough information to help you out.
    But this much I know: When you're saving as a WMV, MOV or FLV file, you're saving at a greatly reduced resolution. Possibly as low as 320x240. (I'm not sure which setting you're using, so I can't say.) That's only about 5% of the resolution of your original file, so it's no wonder it doesn't look very good.
    I don't know what your goal is to output or how you plan to distribute it (computer file? BluRay disc? DVD?), but that will determine what output format to use and what resolution to set it at.
    Meantime, if you want to see what a high quality MOV output looks like, try creating a custom output preset. Try 1920 x 1080 with square pixels.
    As for the issues you're having with your photos, it's hard to say. I don't know what resolution your photos are, but optimizing your photo sizes definitely makes them perform better (and with less unpredictable results).
    I'm not sure how your panarama turned into a bunch of individual pictures -- but I guess I'm assuming you created the panarama using PhotoMerge in Photoshop Elements and then saved it as a single JPEG. I'm not sure of another way to create a continuous panarama.
    Anyway, hope that gets you started. If you can post a sample of your video and then link your response to it, we can have a look at it and maybe then offer more insight.

  • Bluetooth install doesn't match manaual...help

    Hello. I purchased a Bluetooth Dauther Card (60Y3303) per the instructions from a Lenovo tech for my T430 2342CTO but when i referenced the diagram in this manual (t430_t430i_hmm_en_0b48304_03.pdf), it did match. I don't know where to install it now and it's not real evident. Can anyone help? Thanks.
    Solved!
    Go to Solution.

    Nevermind...turned out to be on the underside of the keyboard cover instead of on the laptop itself. Sorry.

  • Whenever I try to install My Add-on, firefox shows an error - unable to install doesn't match the addon firefox expected

    I recently uploaded my add-on, i.e. Anonify Browser to AMO @ https://addons.mozilla.org/en-US/firefox/addon/anonify-browser/ . But when I tried to install it to from Add-on display page. It failed to install. I refreshed page many times but no effects, still same error shown.

    The Mozilla Add-ons website support forum is here:
    https://forums.addons.mozilla.org/

  • You have changed my product key and now microsoft is asking me for activation product key that doesn't match what you have changed. and it clearly stated that you changed my product key... please fix this!

    I'v had my laptop for 9 years. I have been running Mozilla maybe for a year with updates. microsoft Automatic updates are set. Then, yesterday, for no reason at all, Microsoft asks me for my product key activation. Made some research and found out that my microsoft is genuine, however, it has not been activated!!! I found it really strange. When I wanted to put my product key registration, they say it is invalid. So, I made some research by going on the link they offered on the activation screen which brought me to be able to browse the internet. When I made research, I found out through the "test if your product is genuine", there is a product key that is different than what I have. They say I have product key xxxxx-xxxxx-T6DFB-Y934T-YD4YT. it clearly says it is 100 genuine but was not activated! After 9 years? I saw they wrote that my browser states mozilla. am not sure why this is happening. how can my product key change without my authorization? how can I not be able to enter my own computer anymore? why isn't my product activated? can you help me? can't contact microsoft without paying $49/hr or something like that... I don't have a credit card...

    Mozilla has nothing to do with a Microsoft product activation key.
    That "test" page should be viewed in Internet Explorer and not with Firefox, as it may use ActiveX which isn't compatible with any Mozilla product.
    [https://support.mozilla.com/en-US/kb/ActiveX]

  • Text in Tag doesn't match what's Visible on the screen (Acrobat 8 Pro)

    I have been exporting PDFs from InDesign CS3 as tagged Acrobat 8 compatible PDFs. When bookmarking the PDF, I generally highlight the heading I want to bookmark and do a ctrl-B to bookmark it which copies the text and applies it as the bookmark text.
    One thing I've been noticing is that sometimes the visible text is not the text which actually resides in the tag information (Created by ID CS3 - and it's the tag information that gets copied when one highlights and copies the text)
    For example my heading read "Human Exposure" and when I make a bookmark from the highlighted heading (or copy and paste it into another application) it reads "Humanan Exposure" And if you look at the tag text, "Humanan" is what's reported. The original document had it right and the visible Acrobat document has it right
    I have no clue how this is happening. It's either an InDesign CS3 problem or a Distiller problem
    Has anybody else run across this problem?

    O.K., I understand what you're getting at now...
    No, it is a bold font (Times New Roman Bold).
    I'll look again to make sure none of the line has also been bolded.
    I'm starting to think that tagging is a little buggy to begin with, because the actual header reads as follows (it's two lines because it's in a double columned format):
    Production, Use,
    and Human Exposure
    And if I delete the tag and re-tag it as text, copying the whole selection and pasting it (or bookmarking it) gives "P P P P P P P P"

Maybe you are looking for