Version of sap kernel

Hello
How can i see on our system what we use sap kernel 32-bit or 64-bit?
regards,
Denis

Hi,
Very simple.
Go to the path: c:\usr\sap\<SID>\SYS\exe\uc\NT<XXXX>.
The naming convention itself will tell you as to if the system is 64 bit or 32 bit. If I386 then 32, if it ends with 64 then 64 bit.
Also this location would be having two files SAPEXE and SAPEXEDB file see the exact number of it and then login to service market place and there match these numbers at the required location to find it out.
Using command prompt go to the same location and type disp+work you will see a few informations which will have the required details about the kernel.
regards and reward with good points.

Similar Messages

What is the Current ABAP Kernel version for SAP ERP 6 (ECC6)..?

What is the Current ABAP Kernel version for SAP ERP 6 (ECC6)..?

Hi,
Login to http://service.sap.com/swdc using your S user-id
Serach for kernel
Check for your relevent kernel patch (unicode/non-unicode , NW release etc.)
Regards,
Rajneesh

Missing IDES ECC5 installation disk for SAP Kernel - MaxDB Version

Hi,
Our HQ sent us installation disks for IDES ECC5. We copied them all onto our server and started installation. The system is now informing us that it can't find the SAP kernel information.
I can only assume that we're missing one of the installation disks.
We're desperate to get this installed and it will take another week for our HQ to send through another disk. Does anyone know whether we can download this from somewhere? We have had a look on SAP marketplace but you only seem to be able to download the kernel for Oracle, MSSQL and DB2....no MaxDB.
Additionally, if there is somewhere in Asia we can download this, then that would be better as we are having internet problems when connecting to Europe and the US.
Thanks in advance!
Tristan

Hello Tristan,
This is not the correct forum to post your question.
You was not asked about the database(MAXDB) kernel software.
You need SAP kernel software
-> Review the installation guides at service.sap.com/instguides ->
mySAP Business Suite Applications -> mySAP ERP -> mySAP ERP 2004
-> SAP ECC 5.0 ->
Installation Guides of SAP ECC 5.0 SR1
-> < Please see the steps 'How to Proceed' > ->
-> MySQL MaxDB
< Part I: Planning and Preparation
Part II: Installation and Post-Installation >
-> select the documents for the OS of your server.
And the document from the 'Part I: Planning and Preparation' you will get information that you need the SAP kernel CD & & what is the minimum required version & the reference to the location at the SAP Marketplace to download it, if you don't have the required SAP kernel CD.
< You could download the CD from service.sap.com/installations ->
Entry by applicataion group ->
Installations and Upgrades -> SAP NetWeaver -> SAP NETWEAVER->
SAP NETWEAVER 04 ->
Installation and Upgrade ->
< OS> -> < database > -> CD 'SAP Kernel ... <database><OS>.
SAP kernel software is database, platform, Unicode specific. >
In the 'Part II: Installation and Post-Installation' document you will find the the list of the required DVDs for the SAP system-ABAP installation.
-> Are you running the installation of the the 'Central Instance', 'Dialog Instance' or 'Database instance' ?
For the 'Database instance' Installation you need:
SAP Installation Master DVD
SAP Kernel DVD
RDBMS DVD
SAP Export DVD
-> What CD/DVD do you have for the installation?
< You could download the CDs from service.sap.com/installations ->
Entry by applicataion group ->
Installations and Upgrades -> Entry by Application Group
-> SAP Application Components -> SAP ERP-> SAP ERP 2004 -> Installation and Upgrade -> <OS> ->SAP DB >
You could also order the CD, if you have problems with download from the SAP Marketplace.
Thank you and best regards, Natalia Khlopina
PS: SAP Note 19466 will give you information about download of SAP Kernel Patches.
Message was edited by:
Natalia Khlopina

SAP kernel vs btools vs oracle version

we have some questions,
1. sap ecc ehp4 ready sr1 version, is use kernel 7.01 version, can i upgrade to 7.2 version?
2. can upgrade brtools version from 7.00 to 7.2 ?
3. sap ecc ehp4 ready sr1 version, can use oracle 11.2 version on aix, windows, hp-ux?
thank you everyboy help?

> i replace brtools 7.2 version on windows, get error "application has failed to start because the application configuration is incorrect......."
Check your windows event log. Most likely you'll see there an error like the one described in
Note 1402510 - Resolving SideBySide Assembly Errors
and hence you need to fix the ATL library by applying the Windows fix:
Note 1375494 - SAP system does not start after applying SAP kernel patch
Markus

Mixed SAP kernel versions on application servers

Hello.
I'm looking for a Note asserting that mixed versions of the sap kernel on application servers of a single installation are not supported.
E.g. the Central Instance has kernel Version 185 and application server 221 ....
Can anybody help me finding an official source?
Thanks a lot.
Dino

Hi,
What is the purpose of a confirmation for such an obvious fact ?
Do you want an official confirmation that you can't run unix executables on a windows server ?
PS : Don't try to dry your cat in the microwave oven ! There is no official OSS note about it !
Regards,
Olivier

SAP Kernel version

Hello,
For Kernel 6.40, there are 2 types available now:
- SAP Kernel 6.40
- SAP Kernel 6.40 EX2
I believe the EX2 type was recently released by SAP.
Now, for Windows, both these types (normal and EX2) are applicable.
We have to perform a Kernel upgrade.
Which one should we use? normal or EX2?
Moreover, whats the difference between the 2 types?
Thanks.

I checked.
It says:
kernel release 640
kernel make variant 640_REL
So, I guess, this is normal version.
Also, I found Note 1058988 - 640_EX2 Kernels
Thanks.

Kernel version for SAP ERP 6 Ehp4

Hi all,
We have installed ERP 6 Ehp 4 with SAP kernel 7.01. Is it possible to upgrade kernel to version 7.20 without upgrading other components (basis) to Ehp 5?
Thank you for your answers
Andrej

Hi, this is so called Rolling Kernel switch.
you can replace to the release 720 without much problems. I have done this in release 710.
However, could exist some situations that you have to update the support package like in my case that I had the short dump DDIC_TYPELENG_INCONSISTENT after the kernel update. You can check further details in note 1636252.
this is the main note about the project: 1616491
Cheers,
Clébio

SAP Kernel Version in SAP Component

Hi to everyone
I have a simple question.
When you have an Early Watch Alert report. There is a column about "SAP Components". There is "PI_BASIS", SAP_BASIS, SRM_PLUS.
SAP_ABA, SAP_AP, SRM_SERVER, ST-A/PI, ST-PI.
Which component is referred to SAP Kernel?
Is SAP_BASIS, or which one?
Regards

Hi,
Kernel and components are seperate entities.
SAP kernel is a set of executables which act as interface between the SAP system, operating system and the corresponding database. Overview of SAP Kernel : http://www.easymarketplace.de/sap-programs.php
SAP Components or referred to as SAP Packages are SAP_BASIS, SAP_ABA etc. These contain objects depending on the type of package which can delivered to the customer. The objects can provide business logic and technology details as well.
Objects are usually programs, reports, function modules, classes etc or tables, structures, data elements etc.
http://help.sap.com/saphelp_nwpi71/helpdata/EN/ef/f43220b19b11d596c100a0c94260a5/content.htm
Regards,
Srikishan

Help needed applying OSS note 981295 in SAP ECC 5.0 with SAP Kernel 640_REL

Hi Experts,
Our functional team is trying to implement a kind of workflow through a notification via SAP Inbox (transaction code SBWP) after the release of a Purchase Order (Transaction code ME29), this is every time when a purchase order is released through transaction code ME29, a notification will be sent to the SAP Inbox (transaction code SBWP). So according to this they told me to implement OSS note 981295, but using transaction SNOTE I get the message that this note can't be implemented in my system this because my SAP Kernel version is the release 6.40 and the needed SAP Kernel for this note is from version 7.00 to version 7.10. So what do you recommend please in this case in order to implement the required functionality on our SAP ECC 5.0 System?
Best Regards,
Erik Espinosa

Note clearly states
This note is only relevant if the following Support Package is installed in the system:
NW04s: Support Package SAPKB70008
Meaning is not relevat to your case. You need to keep looking... if you open an OSS message people from SAP might put you in the right direction.
Regards
Juan

"You are not authorized to download selected object" when trying to download SAP Kernel 7.21 EXT PL 500 with DL

Hello everyone,
Yesterday (April 30, 2015) SAP released the new patch 500 for SAP KERNEL 7.21 EXT 64-bit.
I am using Download Manager and I was able to download the Kernel Part II (DB-Dependent) .SAR file and other files as you can see in the screenshot, but for the Kernel Part I and disp+work files I get the error: "You are not authorized to download selected object".
On the other hand, I am able to download older versions of the Kernel Part I (SAPEXE_XXX.SAR).
Is this a technical problem on SAP side (SMP)? Did anyone encounter the same issue and found a solution?
Thanks.
BR,
Michel

Hello Michel,
Kernel Patch 500 is yet to release, to the customer.
Have a look at the below blog.
Surprise for Kernel version 7.21 patch level 500 !
Hope the above one helps.
regards,
pavan

Components involved on SAP KERNELL

Hi,
I want to update the sap kernell. I always update with sapexe, and sapexedb(independent and dependent database), but I need to try to update the kernell, but the last release delivered it´s the 701_117.
If I want to update I need to try with the package dw+disp package?
SAP Note 19466 - Downloading SAP kernel patches
More thanks

Hello,
Components of SAPEXE and SAPEXEDB are tested together.
You can update a kernel component if it's newer than the component of SAPEXE or SAPEXEDB
but there may be some unknown side effects.
Component release date is no longer relevant in itself. Sometimes a newer dated SAPEXE
or SAPEXEDB can contain an older component than a single component with an older release date.
If you want to find out which version is newer you should check the file versions.
Regards,
Laszlo

Not able to increase SAP kernel release 6.40 patch level from 43 to 71

Hi Guru's,
I have to update SAP kernel release 6.40 patch level from 43 to 71 but not able to do.I am running solution manager 3.2 on Oracle 9i and Win-2003 OS.
Please provide the solutions .
I have downloaded kernel patch from Path at Service matket place ---Support Packages and Patches" SAP Technology Components" SAP SOLUTION MANAGER" SAP SOLUTION MANAGER 3.2" Entry by Component" SAP Solution Manager-SAP KERNEL 6.40 32-BIT UNICODE-Windows Server on IA32 32bit-ORACLE-
SAR SAPEXEDB_71-20000254.SAR Kernel Part II (for Basis 640/620) 71
I followed following Steps:
1. Copied the patch into a temporary directory on system.
2. Unpacked the downloded SAPEXEDB_71-20000254.SAR Kernel Part II (for Basis 640/620) 71 patch .
3. Stoped the SAP System using MMC.
4. Saved the kernel directory by backup or by copying into a separate backup directory. (\usr\sap\<SAPSID>\sys\exe\run)
5. Re-started the server.
After logging again in SAP client 000 on checking found server patch level coming same as previous one .
Its not got updated and due to this in Tcode- SPAM I am getting error message :'The OCS package SAPKITL318 requires a kernel with Release 640 and patch number 71. The kernel you are currently using has a lower version.'.
Help!!!!
Regards
Gaurav

Hi Guru's,
Output for transaction SM51 enclosed below:
Application server gauravpc1_GSM_00
SAP R/3 Kernel information
SAP R/3 Kernel 640_REL
Database Client Library OCI_920_SHARE
created in NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10
created on Nov 4 2004 23:42:53
Support Level 0
Kernel Patch number 43
Source ID 0.043
DBSL Patch No. 172
ICU Version 2.6.1 Unicode Version 4.0
libsapu16 Version 2.0023 Nov 4 2004 20:04:27
Supported environment
SAP database version
610 , 620 , 630, 640
Database ORACLE 9.2.0..
ORACLE 10.1.0..
ORACLE 10.2.0..
Operating system
Windows NT 5.0, Windows NT 5.1,Windows NT 5.2
one more thing I have aloso tried to upload Kernel latest patch level 175 using same procedure but that too was not working.
HELP!!!!!!!!!!!!!
Regards

Dp lib version mismatch-After kernel upgrade

Hi All,
After kernel upgrade from 700 162 to 179 all the workprocess are not coming up i am getting the below error:
Full qualified hostname = XXXXXX.saipc.XXX.com
***LOG Q0Z=> DpSysAdmExtCreate, bad version (lib=241000 krn=239000) [dpxxtool2.c 681]
LOCATION SAP-Gateway on host XXXXXXX / sapgw01
ERROR dp lib version mismatch, please check installation
TIME Mon Oct 20 00:33:37 2008
RELEASE 700
COMPONENT DP
VERSION 241000
RC -9999
MODULE dpxxtool2.c
LINE 688
DETAIL version of external and kernel dp lib mismatch (ext lib
 version is 241000 / kernel lib version is 239000)
COUNTER 1
ERROR => DpIPCInit2: DpSysAdmExtCreate [dpxxtool2.c 369]
***LOG S0V=> GwStopGateway, gateway stopped () [gwxxrd.c 14652]
XXXXXXXXX:ts2adm 30% pg sapcpe.log
================ >>> main =======================
INFO: sapcpe version: @(#) $Id: //bas/700_REL/src/ccm/sapstart/sapxxcpe.c#18 $ SAP
=================================================
INFO: Try to find file table sapcpeft (default:sapcpeft)
INFO: Try to find file table in the central directory /usr/sap/TS2/SYS/exe/ctrun/sapcpeft
INFO: not found any file table.
=================================================
Update Local Programs (dir-sync + file-path + ln)
=================================================
Starting at 2008/10/20 00:33:34
ERROR: can't change to central Executable-Dir /usr/sap/TS2/SYS/exe/ctrun (No such file or directory) [sapxxcpe.c:1488]
Mon Oct 20 00:50:19 2008
ERROR => gateway (pid 24413) died [dpxxdisp.c 16063]
DpGwCheck: appc_adm.stat = 2
DP_FATAL_ERROR => Gateway could not be started - I better exit now
please help in solving this problem
Thanks
Giridhar
Edited by: giridhar n on Oct 20, 2008 12:47 PM

Hi,
We faced an issue with workprocesses which are not coming up after the kernel(700) upgrade from patch 162 to 179. below are the error logs:
Error Log
(XXXXXXXXX is the hostname)
Dev_W1:
XXXXXXXXX:ts2adm 9% more dev_w1.old
trc file: "dev_w1", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
M sysno 01
M sid TS2
M systemid 370 (Solaris on SPARCV9 CPU)
M relno 7000
M patchlevel 0
M patchno 162
M intno 20050900
M make: single threaded, Unicode, 64 bit, optimized
M pid 3867
M
M
M Mon Oct 20 03:59:26 2008
M kernel runs with dp version 239000(ext=110000) (-(#) DPLIB-INT-VERSION-239000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q01=> ThInit, WPStart (Workproc 1 1 3867) [thxxhead.c 1281]
M ThInit: running on host XXXXXXXXX
M calling db_connect ...
C Oracle Client Version: '10.2.0.2.0'
C
C Mon Oct 20 03:59:27 2008
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPTS2's password
C Connecting as /-TS2 on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0x106eea0c0 0x106ef1b80 0x106f02318
C Attaching to DB Server TS2 (con_hdl=0,svchp=0x106f02248,srvhp=0x106f04598)
C Starting user session (con_hdl=0,svchp=0x106f02248,srvhp=0x106f04598,usrhp=0x106ef2398)
C Now '/-TS2' is connected: con_hdl=0, nls_hdl=0, session_id=475.
C Got SAPTS2's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=0x106f02248,usrhp=0x106ef2398)
C Now I'm disconnected from ORACLE
C Connecting as SAPTS2/<pwd>-TS2 on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0x106eea0c0 0x106ef1b80 0x106f02318
C Starting user session (con_hdl=0,svchp=0x106f02248,srvhp=0x106f04598,usrhp=0x106ef2398)
C Now 'SAPTS2/<pwd>-TS2' is connected: con_hdl=0, nls_hdl=0, session_id=475.
C Database NLS settings: AMERICAN_AMERICA.UTF8
C DB instance TS2 is running on XXXXXXXXX with ORACLE version 10.2.0.2.0 since OCT 20, 2008, 03:49:47
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20081020 035926 XXXXXXXXX
C build_stmt: reallocating stmt buffer: 256 -> 2000 characters
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,
.sar,.gif
I
I Mon Oct 20 03:59:30 2008
I MtxInit: 1 0 0
M SHM_PRES_BUF (addr: 0xffffffff64c00000, size: 20000768)
M SHM_ROLL_AREA (addr: 0xfffffffe40000000, size: 268435456)
M SHM_PAGING_AREA (addr: 0xfffffffe36000000, size: 134217728)
M SHM_ROLL_ADM (addr: 0xffffffff7597a000, size: 3715586)
M SHM_PAGING_ADM (addr: 0xffffffff79a00000, size: 656416)
M ThCreateNoBuffer allocated 572152 bytes for 1000 entries at 0xfffffffe2c004000
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12176 bytes (50 server) at 0xffffffff7a900000
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 1 initializing ....
X Using implementation std
X <ES> Info: use normal pages (no huge table support available)
X ES initialized.
B dbntab: NTAB buffers attached
B dbntab: Buffer FTAB(hash header) (addr: 0xfffffffe2c092088, size: 576)
B dbntab: Buffer FTAB(anchor array) (addr: 0xfffffffe2c0922c8, size: 798968)
B dbntab: Buffer FTAB(item array) (addr: 0xfffffffe2c1553c0, size: 3195648)
B dbntab: Buffer FTAB(data area) (addr: 0xfffffffe2c4616c0, size: 30740480)
B dbntab: Buffer IREC(hash header) (addr: 0xfffffffe2e1b6088, size: 576)
B dbntab: Buffer IREC(anchor array) (addr: 0xfffffffe2e1b62c8, size: 798968)
B dbntab: Buffer IREC(item array) (addr: 0xfffffffe2e2793c0, size: 798912)
B dbntab: Buffer IREC(data area) (addr: 0xfffffffe2e33c480, size: 6148096)
B dbntab: Buffer STAB(hash header) (addr: 0xfffffffe2e91c088, size: 576)
B dbntab: Buffer STAB(anchor array) (addr: 0xfffffffe2e91c2c8, size: 798968)
B dbntab: Buffer STAB(item array) (addr: 0xfffffffe2e9df3c0, size: 798912)
B dbntab: Buffer STAB(data area) (addr: 0xfffffffe2eaa2480, size: 3072000)
B dbntab: Buffer TTAB(hash header) (addr: 0xfffffffe2ed94088, size: 3072)
B dbntab: Buffer TTAB(anchor array) (addr: 0xfffffffe2ed94c88, size: 798968)
B dbntab: Buffer TTAB(item array) (addr: 0xfffffffe2ee57d80, size: 1997280)
B dbntab: Buffer TTAB(data area) (addr: 0xfffffffe2f03f760, size: 14580144)
B db_con_shm_ini: WP_ID = 1, WP_CNT = 24, CON_ID = -1
B dbstat: TABSTAT buffer attached (addr: 0xfffffffe28012008)
B dbtbxbuf: Buffer TABL (addr: 0xfffffffe24000100, size: 60000256, end: 0xfffffffe27938900)
B dbtbxbuf: Buffer TABLP (addr: 0xfffffffe20000100, size: 40960000, end: 0xfffffffe22710100)
B dbexpbuf: Buffer EIBUF (addr: 0xffffffff5d800108, size: 4194304, end: 0xffffffff5dc00108)
B dbexpbuf: Buffer ESM (addr: 0xfffffffe5f800108, size: 4194304, end: 0xfffffffe5fc00108)
B dbexpbuf: Buffer CUA (addr: 0xfffffffe2fe30108, size: 5120000, end: 0xfffffffe30312108)
B dbexpbuf: Buffer OTR (addr: 0xfffffffe59800108, size: 4194304, end: 0xfffffffe59c00108)
B dbcalbuf: Buffer CALE (addr: 0xffffffff75d08000, size: 500000, end: 0xffffffff75d82120)
I *** ERROR => ShmProtect(62,3) shmat(268435641,0x0xfffffffe5a000000,(SHM_RND | 0)) (22: Invalid argument) [shmux.c 2782]
I *** ERROR => ShmCreate: ShmProtect( 62, 3) failed [shmux.c 1359]
I *** ERROR => ShmCreate( ATTACH 62, 86228824) failed 1 [mpixx.c 855]
M *** ERROR => DpInitMpi: MpiInit failed (1) [dpxxtool2.c 5064]
M in_ThErrHandle: 1
M *** ERROR => ThInit: DpInitMpi (step 1, th_errno 17, action 3, level 1) [thxxhead.c 10506]
M
M Info for wp 1
M
M pid = 3867
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 724]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
B dbtbxbuf: Saving TBX statistics:
B dbtbxbuf: 0 object entries written.
M ***LOG Q02=> wp_halt, WPStop (Workproc 1 3867) [dpuxtool.c 269]
dev_icm:
trc file: "dev_icm", trc level: 1, release: "700"
sysno 01
sid TS2
systemid 370 (Solaris on SPARCV9 CPU)
relno 7000
patchlevel 0
patchno 177
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 3865
[Thr 1] started security log to file dev_icm_sec
[Thr 1] ICM running on: XXXXXXXXX.saipc.XXX.com
[Thr 1] MtxInit: 30001 0 2
[Thr 1] IcmInit: listening to admin port: 64999
[Thr 1] ***LOG Q0Z=> DpSysAdmExtCreate, bad version (lib=241000 krn=239000) [dpxxtool2_mt 681]
[Thr 1]
[Thr 1] * LOCATION ICM runing on host XXXXXXXXX
[Thr 1] * ERROR dp lib version mismatch, please check installation
[Thr 1] *
TIME Mon Oct 20 03:59:28 2008
[Thr 1] * RELEASE 700
[Thr 1] * COMPONENT DP
[Thr 1] * VERSION 241000
[Thr 1] * RC -9999
[Thr 1] * MODULE dpxxtool2_mt.c
[Thr 1] * LINE 688
[Thr 1] * DETAIL version of external and kernel dp lib mismatch (ext lib
 version is 241000 / kernel lib version is 239000)
[Thr 1] * COUNTER 3
[Thr 1] *
[Thr 1] *****************************************************************************
[Thr 1] *** ERROR => DpIPCInit2: DpSysAdmExtCreate [dpxxtool2_mt 369]
[Thr 1] *** ERROR => IcmInit: IcmIPCInit failed (rc=-9999) [icxxman_mt.c 1741]
[Thr 1] *** ICM shutdown completed (pid: 3865) ***
dev_ms:
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 1] Mon Oct 20 03:59:24 2008
[Thr 1] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 370 (Solaris on SPARCV9 CPU)
relno 7000
patchlevel 0
patchno 145
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 3853
[Thr 1] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 3853) [msxxserv_mt. 1834]
[Thr 1] SigISetDefaultAction : default handling for signal 18
[Thr 1] load acl file = /usr/sap/TS2/SYS/global/ms_acl_info
[Thr 1] MsGetOwnIpAddr: my host addresses are :
[Thr 1] 1 : [148.92.31.49] XXXXXXXXX (HOSTNAME)
[Thr 1] 2 : [127.0.0.1] localhost (LOCALHOST)
[Thr 1] 3 : [148.92.31.157] XXXXXXXXX-maint (NILIST)
[Thr 1] 4 : [10.220.6.72] XXXXXXXXX-bkup (NILIST)
[Thr 1] MsHttpInit: full qualified hostname = XXXXXXXXX.saipc.XXX.com
[Thr 1] HTTP logging is switch off
[Thr 1] MsHttpOwnDomain: own domain[1] = saipc.XXX.com
[Thr 1] ms/icf_info_server : deleted
[Thr 1] *** I listen to port sapmsTS2 (3601) ***
[Thr 1] *** I listen to internal port 3901 (3901) ***
[Thr 1] CUSTOMER KEY: >C0395101982<
[Thr 1] Mon Oct 20 04:01:28 2008
[Thr 1] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from XXXXXXXXX_TS2_01 [msxxserv_mt. 4687]
[Thr 1] Mon Oct 20 04:05:07 2008
[Thr 1] MsSExit: received SIGINT (2)
[Thr 1] ***LOG Q02=> MsSHalt, MSStop (Msg Server 3853) [msxxserv_mt. 5998]
dev_rd:
trc file: "dev_rd", trc level: 1, release: "700"
Mon Oct 20 03:59:26 2008
***LOG S00=> GwInitReader, gateway started ( 3864) [gwxxrd.c 1757]
systemid 370 (Solaris on SPARCV9 CPU)
relno 7000
patchlevel 0
patchno 176
intno 20050900
make: single threaded, Unicode, 64 bit, optimized
pid 3864
gateway runs with dp version 241000(ext=110000) (-(#) DPLIB-INT-VERSION-241000-UC)
gateway (version=700.2008.06.23)
gw/local_addr : 0.0.0.0
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Mon Oct 20 03:59:27 2008
CCMS: Checking Downtime Configuration of Monitoring Segment.
Bind service sapgw01 (socket) to port 3301
GwPrintMyHostAddr: my host addresses are :
1 : [148.92.31.49] XXXXXXXXX (HOSTNAME)
2 : [127.0.0.1] localhost (LOCALHOST)
3 : [148.92.31.157] XXXXXXXXX-maint (NILIST)
4 : [10.220.6.72] XXXXXXXXX-bkup (NILIST)
Full qualified hostname = XXXXXXXXX.saipc.XXX.com
***LOG Q0Z=> DpSysAdmExtCreate, bad version (lib=241000 krn=239000) [dpxxtool2.c 681]
LOCATION SAP-Gateway on host XXXXXXXXX / sapgw01
ERROR dp lib version mismatch, please check installation
TIME Mon Oct 20 03:59:27 2008
RELEASE 700
COMPONENT DP
VERSION 241000
RC -9999
MODULE dpxxtool2.c
LINE 688
DETAIL version of external and kernel dp lib mismatch (ext lib
 version is 241000 / kernel lib version is 239000)
COUNTER 1
ERROR => DpIPCInit2: DpSysAdmExtCreate [dpxxtool2.c 369]
***LOG S0V=> GwStopGateway, gateway stopped () [gwxxrd.c 14652]
dev_rfc24:
Trace file opened at 20081020 031506 EDT SAP-REL 700,0,162 RFC-VER U 3 985555
======> User is locked. Please notify the person responsible
ABAP Programm: SAPLTMSC (Transaction: )
Called function module: TMS_CI_START_SERVICE
User: DDIC (Client: 015)
Destination: TMSADM-TS2.DOMAIN_DV2 (handle: 2, 11671309, {48FC3006-2FF4-60E5-E100-0000945C1F31})
dev_disp
trc file: "dev_disp.new", trc level: 1, release: "700"
sysno 01
sid TS2
systemid 370 (Solaris on SPARCV9 CPU)
relno 7000
patchlevel 0
patchno 162
intno 20050900
make: single threaded, Unicode, 64 bit, optimized
pid 3854
Mon Oct 20 03:59:25 2008
kernel runs with dp version 239000(ext=110000) (-(#) DPLIB-INT-VERSION-239000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 3854) [dpxxdisp.c 1257]
 shared lib "dw_xml.so" version 162 successfully loaded
 shared lib "dw_xtc.so" version 162 successfully loaded
 shared lib "dw_stl.so" version 162 successfully loaded
 shared lib "dw_gui.so" version 162 successfully loaded
 shared lib "dw_mdm.so" version 162 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >XXXXXXXXX_TS2_01 <
DpShMCreate: sizeof(wp_adm) 42240 (1760)
DpShMCreate: sizeof(tm_adm) 150350080 (30064)
DpShMCreate: sizeof(wp_ca_adm) 31232 (104)
DpShMCreate: sizeof(appc_ca_adm) 208000 (104)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/548056/548064
DpShMCreate: sizeof(comm_adm) 548064 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (2080)
DpShMCreate: sizeof(wall_adm) (1000056/862328/88/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0xffffffff66000000, size: 153051096)
DpShMCreate: allocated sys_adm at 0xffffffff66000000
DpShMCreate: allocated wp_adm at 0xffffffff66002218
DpShMCreate: allocated tm_adm_list at 0xffffffff6600c718
DpShMCreate: allocated tm_adm at 0xffffffff6600c778
DpShMCreate: allocated wp_ca_adm at 0xffffffff6ef6f078
DpShMCreate: allocated appc_ca_adm at 0xffffffff6ef76a78
DpShMCreate: allocated comm_adm at 0xffffffff6efa96f8
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0xffffffff6f02f3d8
DpShMCreate: allocated gw_adm at 0xffffffff6f02f458
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0xffffffff6f02f488
DpShMCreate: allocated wall_adm at 0xffffffff6f02f490
Mon Oct 20 03:59:26 2008
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<ES> Info: use normal pages (no huge table support available)
EsStdUnamFileMapInit: ES base = 0x0xfffffffe60000000
EsStdInit: Extended Memory 4048 MB allocated
<ES> 4047 blocks reserved for free list.
ES initialized.
Mon Oct 20 03:59:31 2008
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1659]
***LOG Q0K=> DpMsAttach, mscon ( XXXXXXXXX) [dpxxdisp.c 12153]
DpStartStopMsg: send start message (myname is >XXXXXXXXX_TS2_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
ERROR => DpWPCheck: W0 (pid 3866) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3866) exited with exit code 255
my types changed after wp death/restart 0xbf --> 0xbd
ERROR => DpWPCheck: W1 (pid 3867) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3867) exited with exit code 255
ERROR => DpWPCheck: W2 (pid 3868) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3868) exited with exit code 255
ERROR => DpWPCheck: W4 (pid 3870) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3870) exited with exit code 255
ERROR => DpWPCheck: W5 (pid 3871) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3871) exited with exit code 255
ERROR => DpWPCheck: W6 (pid 3872) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3872) exited with exit code 255
ERROR => DpWPCheck: W7 (pid 3873) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3873) exited with exit code 255
ERROR => DpWPCheck: W8 (pid 3874) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3874) exited with exit code 255
ERROR => DpWPCheck: W9 (pid 3875) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3875) exited with exit code 255
ERROR => DpWPCheck: W10 (pid 3885) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3885) exited with exit code 255
ERROR => DpWPCheck: W11 (pid 3888) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3888) exited with exit code 255
ERROR => DpWPCheck: W12 (pid 3890) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3890) exited with exit code 255
ERROR => DpWPCheck: W13 (pid 3902) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3902) exited with exit code 255
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 162
Release check o.K.
Mon Oct 20 03:59:51 2008
my types changed after wp death/restart 0xbd --> 0x81
ERROR => DpWPCheck: W14 (pid 3903) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3903) exited with exit code 255
ERROR => DpWPCheck: W15 (pid 3904) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3904) exited with exit code 255
ERROR => DpWPCheck: W16 (pid 3905) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3905) exited with exit code 255
ERROR => DpWPCheck: W17 (pid 3908) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3908) exited with exit code 255
ERROR => DpWPCheck: W18 (pid 3911) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3911) exited with exit code 255
ERROR => DpWPCheck: W19 (pid 3914) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3914) exited with exit code 255
ERROR => DpWPCheck: W20 (pid 3915) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3915) exited with exit code 255
ERROR => DpWPCheck: W21 (pid 3916) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3916) exited with exit code 255
ERROR => DpWPCheck: W22 (pid 3919) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3919) exited with exit code 255
ERROR => DpWPCheck: W23 (pid 3924) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3924) exited with exit code 255
Mon Oct 20 04:00:11 2008
ERROR => gateway (pid 3864) died [dpxxdisp.c 16063]
DpGwCheck: appc_adm.stat = 2
DP_FATAL_ERROR => Gateway could not be started - I better exit now
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
kill(3869,0) successful -> process alive
killing W3-3869 (SIGUSR2)
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Oct 20 04:00:21 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Oct 20 08:00:21 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3866 Ended no 3 0 0
1 DIA 3867 Ended no 3 0 0
2 DIA 3868 Ended no 3 0 0
3 DIA 3869 Run yes 0 0 0
4 DIA 3870 Ended no 3 0 0
5 DIA 3871 Ended no 3 0 0
6 DIA 3872 Ended no 3 0 0
7 DIA 3873 Ended no 3 0 0
8 DIA 3874 Ended no 3 0 0
9 DIA 3875 Ended no 3 0 0
10 UPD 3885 Ended no 3 0 0
11 UPD 3888 Ended no 3 0 0
12 UPD 3890 Ended no 3 0 0
13 UPD 3902 Ended no 3 0 0
14 ENQ 3903 Ended no 2 0 0
15 BTC 3904 Ended no 2 0 0
16 BTC 3905 Ended no 2 0 0
17 BTC 3908 Ended no 2 0 0
18 BTC 3911 Ended no 2 0 0
19 BTC 3914 Ended no 2 0 0
20 BTC 3915 Ended no 2 0 0
21 SPO 3916 Ended no 2 0 0
22 UP2 3919 Ended no 2 0 0
23 UP2 3924 Ended no 2 0 0
Dispatcher Queue Statistics Mon Oct 20 08:00:21 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
0
4000
0
0
--------++++--
+
DIA
4
4
4000
4
0
--------++++--
+
UPD
0
0
4000
0
0
--------++++--
+
ENQ
0
0
4000
0
0
--------++++--
+
BTC
0
0
4000
0
0
--------++++--
+
SPO
0
0
4000
0
0
--------++++--
+
UP2
0
0
4000
0
0
--------++++--
+
max_rq_id 7
wake_evt_udp_now 0
wake events total 3, udp 2 ( 66%), shm 1 ( 33%)
since last update total 3, udp 2 ( 66%), shm 1 ( 33%)
Dump of tm_adm structure: Mon Oct 20 08:00:21 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Oct 20 08:00:21 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Oct 20 04:00:26 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >XXXXXXXXX_TS2_01 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
please help me to solve this.
Thanks
Giridhar

Requirements for using SAP Kernel 7.20_EXT, e.g. with ERP 6.0 EhP 6

Dear community,
we want to bring your attention to the important fact that upcoming SAP product releases and Enhancement Packages, like SAP ERP 6.0 EhP 6 and other members of the BS7i2011 release of SAP Business Suite 7, will use the new 7.20_EXT kernel. As we are using fully supported third party software when building this version of the 7.20 kernel, kernel 7.20_EXT allows us to safely support our customers in the upcoming years. Our updated build environments make SLES 11 Service Pack 1 and RHEL 6 the minimum Linux versions allowing you to run SAP Kernel 7.20_EXT. Please take this prerequisite into account when implementing projects that require or allow you to use SAP Kernel 7.20_EXT.
You can find more information here:
Note 1563102 - Linux Requirements for 7.20_EXT kernel
SAP Product Availability Matrix for SAP NetWeaver 7.0
Or directly access the PAM for SAP NetWeaver 7.0 EhP 3 (page 4).
In case of questions, please feel free to contact us by a mail to linux[at]sap.com as well.
Best Regards,
Alexander Hass.

Dear community,
we want to bring your attention to the important fact that upcoming SAP product releases and Enhancement Packages, like SAP ERP 6.0 EhP 6 and other members of the BS7i2011 release of SAP Business Suite 7, will use the new 7.20_EXT kernel. As we are using fully supported third party software when building this version of the 7.20 kernel, kernel 7.20_EXT allows us to safely support our customers in the upcoming years. Our updated build environments make SLES 11 Service Pack 1 and RHEL 6 the minimum Linux versions allowing you to run SAP Kernel 7.20_EXT. Please take this prerequisite into account when implementing projects that require or allow you to use SAP Kernel 7.20_EXT.
You can find more information here:
Note 1563102 - Linux Requirements for 7.20_EXT kernel
SAP Product Availability Matrix for SAP NetWeaver 7.0
Or directly access the PAM for SAP NetWeaver 7.0 EhP 3 (page 4).
In case of questions, please feel free to contact us by a mail to linux[at]sap.com as well.
Best Regards,
Alexander Hass.

Versioning on SAP PI

Hello PI gurus
I have been asked to look at versioning on PI. Specifically how we maintain multiple versions of an interface for our various Landscape rollouts and ensure that both versions can be used. I have researched the options, run a few tests and my conclusions are below but I am looking for a second opinion and would appreciate your feedback
Options
1) Create a new SWCV.
According to SAPs documentation a software component version is a shipment unit for design objects in the ES Repository. You use a SWCV to group together objects that are shipped or installed together.SAP uses this approach for the majority of their standard content. You cannot copy objects between different releases of a SWCV. You have to use the Transfer Design Objects Function (ESR Menu under tools). It is a neat tool that will transfer objects only if the source objects are more recent or the target objects do not exist. You can preview the changes and it will tell you what will be updated (source version is more recent), what cannot be transferred (the target version is more recent) or what does not need to be transferred (the versions are the same).
This is appropriate for deploying different versions of a particular software package but does not allow us to actually use both versions. The majority of the ID objects refer to the interface/namespace and not the SWCV. If you try and add two identical interfaces from separate SWCV to the same Communications Component you get an error.
2) Create a new namespace with a version number
SAP has used this approach for the NFE updates and it works.
3) Ensure that the interface is backwards compatible.
Backwards compatibility is not always easy to achieve. The functional requirements we are given evolve over time and it may be the case that what seems to be a simple change that may not have any impact may will change significantly.
4) Add a version number to the object names
Not the most elegant approach but it would work.
5) Stand up a separate PI landscape.
Not my preferred approach as it introduces additional costs, maintenance, monitoring and development. It seems to overkill.
Summary
Using different SWCV allows new releases to be created and deployed but you can only have a single release active at any moment in time. Using Namespaces allows multiple releases to be deployed. If you look at the SWCV for NFE, SAP SLL-NFE you can see they have taken this approach. I have hecked the SAP support sites and cannot find anything on versioning.
My preferred option is number 2. Using a different namespace works but will require the calling system to update their configuration to support this.

Dimitri,
My other concern is that there is no relationship between the versions. For example assume we have version 1 and 2 of an interface and both need to be in production for several weeks. Then, for example, the end users identify a bug that can be found in both versions. We then have to apply that fix to both versions independently. What that means is while we have both versions available we would then have dual maintenance.
I've look at versioning with SWCV and SAP have a great tool for copying code between the releases. However, from what I can see you can only configure one version in place at any one time.
Is this really the only solution.
Regards
Rob

Version of sap kernel

Similar Messages

Maybe you are looking for