Version Roll-Back

How do I roll-back to an older/earlier version of Acrobat Standard?  I want to undo the Version 9.5.0 update and revert back to Standard Version 9.4.7 or older.

No deal. You'd have to uninstall Acrobat fully, then reinstall it, obviously only applying the updates manually.
Mylenium

Similar Messages

  • My Ipod Classic (160G) no longer synchs completely with iTunes (93G).  Have reset and restored to no avail.  AM about to try roll back to a previous version of iTunes, which has been on auto update.

    My iPod Classic (160G) used to sync flawlessly with iTunes (93G).
    Recently, there seem to be fewer folders syncing.  In particular, it is not syncing more recent adds.  It also occassionally refuses to sync at least one mp3 downloaded from  Amazon.com, giving an unable to sync message with an error code or 50.
    I'm running iTunes version 10.7, and the software (2.04) on myiPod is current.
    I only use the iPod for music.  I have only one playlist.
    Reset and restore did not fix the problem; I'm considering rolling back to a previous version of iTunes.  Are there any other  ideas to consider? 
    Please advise.
    Thanks,
    R

    giving an unable to sync message with an error code or 50
    See this older thread for some possible solutions.
    https://discussions.apple.com/thread/3924425?tstart=0
    iTunes and its sync process with your iPod have been know to choke once the amount of data that needs to be transferred, replaced, or updated, reaches a certain size limit in GBs.
    B-rock

  • Glitches in address fill-ins with nicknames; default font problem; plus other glitches in Thunderbird 31.3.0 and 31.4.0; can I roll back to an earlier version?

    I am unhappy with the recent upgrade to Thunderbird 31.3.0 and now 31.4.0. My bottom line question is whether I can roll back to the previous version, which was working well for me.
    The problems I have encountered include:
    1. I used to be able to enter a single letter in many cases in the address field, and the autocomplete would fill in the entry that I always use with that single letter. That function has been lost, as has auto fill-in based on the nicknames I have entered in my Address Book. I see there is another thread on this problem (https://support.mozilla.org/en-US/questions/1036962), but no satisfactory answer so far. Entering a single letter now pulls up completely unrelated address entries that may not even have that letter as part of the name, address or nickname for that unrelated address. I have created new nicknames to try to adapt to this problem, but even these new nicknames no longer work with the 31.4.0 upgrade yesterday, forcing me to create yet more complex and hard-to-remember nicknames to pull up my frequent addressees. This is all very frustrating to me, as I depend on speed and ease when creating messages.
    2. Also, I used to be able to enter a single letter in the address field and then use the mouse to click on the "To:" symbol to the left of the next address line to change the next entry to "Cc:"; doing so would then cause the complete address to fill in in the "To:" address field, and make the next field ready for an entry. That no longer works. If I use that technique, the shortcut that I entered in the first field gets included along with the address (if I'm lucky enough to have the address itself selected now, given the problems I've mentioned above). I now have to press "Enter" in order to get the address in the first field to "take" correctly, and then have to click on the "To:" symbol for the next line as a separate action. Just another inconvenience with the new version.
    3. While still on the subject of addresses, personally I see no reason why the address and subject fields should now be colored blue by default rather than appearing as blank, white fields. I far prefer the old look. And I suspect that changing from the blue color to a nice, clean, white field takes time and computer resources that slow things down.
    4. The default font (Times in my case) no longer "takes" when replying to or forwarding messages. I've checked Tools/Options/Composition, and Times is still shown as my default font. However, when I start to type (in a reply with the original message quoted or in a forwarded message), the result is "Variable Width". In order to get Times, I need to highlight the block of text after typing, including the lead-in to the quoted message or the header of the forwarded message, and select "Times" when "(mixed)" shows up. This is a big pain; I often forget to do so and end up having to edit the Unsent Message (which I check before sending) as New and correct the font.
    5. A minor problem: I rely on the reminder to attach a message which shows up when an "attachment-related" word is entered in the body of the message. It has been a wonderful feature of Thunderbird that has prevented me on many occasions from sending off messages without the attachments. However, in the new versions, even if I have indeed added the attachment, a pop-up comes up on sending the message saying there has been no attachment and asking if I want to add one. It's easy enough to just click "No", but it's yet one more unnecessary and distracting step that this new version is requiring of the user.
    I'm really sad to see these various changes/glitches. I love Thunderbird and it bothers me deeply to find myself mired in so many new problems that slow down my work. I would be grateful for any suggestions and advice, and, particularly, for any information as whether I can roll back to the version prior to 31.3.0 that was working well for me.

    Thank you, Zenos. I tried rolling back to v31.2.0, since I had not encountered problems prior to December. However, that didn't help. So I followed your valuable suggestion to revert to v24.6; that seems to have done the trick.
    I would like to mark this problem as "Solved" -- the rollback seems to have worked. However, since my original post was a complex mix of things, before I do that, should I post the individual problem sets that I had noted (address fields/nicknames problems -- numbers 1-3; default font problem -- number 4; attachment reminder problem -- number 5) as separate issues which have not been solved?
    Do you know if these various issues are being worked on? I'm glad to have the temporary fix of rolling back to an earlier version, but I'd like to get back on the current update schedule at some point if and when these problems have been corrected.
    Thank you again!

  • How do I roll-back to the previous version of Firefox? An auto update occurred and now one of the programs used at the office (ACT! v6.0 SwiftMail) won't run with the browser.

    The office I work in uses a very old version of ACT!, an accounting package. This package has a component called SwiftPage, an antiquated email system that enables us to email from the ACT DB. SwiftPage runs via the web browser.
    Firefox just did an auto update (that I will have to find out how to turn off) and now SwiftPage won't run as it is not compatible.
    Can I "roll-back" my version of Firefox or do I have to uninstall and try to re-install an older version?
    HELP!

    Try loading and using the add-on from this link: https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/
    Many add-ons do in fact work if you force them to run. The procedure to roll-back is given in this article: [[installing previous versions of firefox]]
    Unfortunately the official Firefox policy is that you downgrade to 3.6 which is supported for a while longer, and not the now unsupported Firefox 4. If after installing and running the ''add-on compatibility reporter'' you still have problems there are ways around the official policy.
    I think it is absurd that Firefox 4 may be used by tens of millions of users one day and a few days later those that upgrade to Firefox 5 should be not only told not to use a now unsupported browser, if they need to revert due to problems, but are actually obstructed in attempts to do so. See also [/questions/840397#answer-205154]

  • Rolling back from OIM version 11g to 9.1.0.2

    Experts,
    OIM version upgrade from 9.1.0.2 to 11g(11.1.1.5) need to be rolled back due to some error.
    Just wanted to know views of experts.
    Following steps have been completed so far of the upgrade guide [http://docs.oracle.com/cd/E21764_01/upgrade.1111/e10129/upgrade_oim.htm].
    •Task 1: Identify and Prepare Oracle Database for Oracle Identity Manager 11g (Optional)
    •Task 2: Use the Repository Creation Utility to Create the Schema in the Database
    •Task 3: Install Oracle Fusion Middleware
    •Task 4: Use Upgrade Assistant to Upgrade the Oracle Identity Manager Schema
    •Task 5: Create a WebLogic Domain for Oracle Identity Manager
    •Task 6: Start the WebLogic Administration Server
    •Task 7: Configure Oracle Identity Manager Server 11g
    •Task 8: Configure Node Manager to Start Managed Servers
    •Task 9: Start the SOA Managed Server
    •Task 10: Start the Oracle Identity Manager Managed Server
    •Task 11: Stop the Oracle Identity Manager Managed Server
    Rollback strategy:-
    1. Delete extra schemas(SOA MDC etc) created during Task2
    2. Restoring the OIM DB schema (of version 9.1.0.2) from backup.
    3. Updating back path and variables environment with old values
    4. Starting the weblogic and OIM application from old Middleware_home and OIM_HOME.
    Experts,
    Above rollback strategy would be enough or should i take some other point in consideration.
    If you can think of any other thing please share..
    Thanks,
    Manohar

    Yes your strategies seems fine. for dropping schema you can RCU as well.
    for restore, Drop all the entities manually from oim db schema So you don't have any grant issue while importing old 10g dump
    --nayan                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Itunes 64 bit on windows 7 is unable to install, i have the 64 bit installer version but it keeps saying "errors occurred" at the ( rolling back ) phase. HELP!

    itunes 64 bit on windows 7 is unable to install, i have the 64 bit installer version but it keeps saying "errors occurred" at the ( rolling back ) phase. HELP!!!

    I have the answer and this might be useful for any one else wondering about this in the future. If it helped you or explained what you wanted to know. Replay to the post pls
    It's quite easy actually. First have your "iTunes Library Extras", "iTunes Library Genius", "iTunes Library", and "iTunes Music Library" backed up. Download ans install iTunes 64-bit. I don't know what's so 64-bit about iTunes 64 since Win7 reports it as a 32-bit application in the task manager. But anyway. Install iTunes 64 and launch it. If you migrated your library to another drive like me go to settings in iTunes and change the directory to your location. Close iTunes. Replace the newly created files with your backed up files. Launch iTunes. iTunes will load and then update your library and from there you are set to go! so basically it is just like a normal upgrade. But if you hesitated to go from 32 to 64 like me, here is your answer.
    By the way. I'm using Windows 7 64-bit with iTunes 64-bit and it works without problems and syncing with my iPod Touch also works flawlessly.

  • Desperate for easy way to roll back 5.1 firmware to a previous version?

    The company I work for uses a proprietary iPod Touch app for data management. I have a 3rd gen iPod Touch that I updated to firmware 5.1. I don't think many people in the company keep up with firmware updates like I do. However that may now be to their advantage because we had an app software update about the time the firmware update happened and my app no longer works like it should - I am one of very few employees, nation wide, that has this problem. I think it has to do with an incompatability of the app software and the 5.1 firmware.  I really need to be able to use the app to it's fullest capacity. Its  been weeks and the company hasn't fixed the problem so I'm seeking  answers of my own.
    Is there a simple way to roll back the firmwareto 5.0 or before the cloud software came out (I don't know what version that would be)??? or is it permanent?
    I use a Microsoft based notebook for my iPod/iTunes managment so answers gear to a Mac won't necessarily make sense to me.
    Thank you!!

    "apple" doesnt support downgrade of any software..but there are other ways to do it..u know wat i mean rite

  • I need to roll back to version 3.6.16 for use with Cha Cha and the oldest version I can find is 3.6.20. Help!

    Hi,
    In order to use Cha Cha's tools I need to roll back to version 3.6.16 or earlier as noted by them: "Please note: the ChaCha Toolbar is currently not compatible with FF 4.0 or 5.0. If you have Firefox version 4 or 5, please revert back to a previous version of Firefox. 3.6.16" Nees help with this as the erliest version that comes up readily is version 3.6.20
    Thanks,
    Frankie Dunham

    If you haven't already used Firefox Sync, you don't have a Sync account.
    If all you want to do is use Firefox Sync, you can install the Firefox Sync extension into Firefox 3.6.x versions. <br />
    https://addons.mozilla.org/en-US/firefox/addon/firefox-sync/

  • Installing lates itunes version to my Windows 7 g4 bit laptop but i always come accross with the error ???????? in the middle of installation. Then it will roll back everything and wont install at all

    Installing lates itunes version to my Windows 7 g4 bit laptop but i always come accross with the error ???????? in the middle of installation. Then it will roll back everything and wont install at all

    What does the error message say? Precise text, please.

  • How do I roll back to an earlier version of Safari in Snow Leopard?

    I recently applied the recent snow leopard update including safari 5.1.   Now the juniper vpn no longer recoginzes safari.   How do I roll back to the previous version of safari? (5.0.5?)

    Solved.  (well actually worked around).    Downloaded pacifist (http://www.charlessoft.com/) downloaded the SL dmg (http://appldnld.apple.com.edgesuite.net/content.info.apple.com/Safari5/041-0564. 20110413.Fi9pb/Safari5.0.5SnowLeopard.dmg) Opened the dmg in pacifist, right clicked on package and installed to default location.    I am now able to run the juniper vpn

  • How do I roll back to an older version of iTunes

    How do I roll back to an older version of iTunes? THIS NEW VERSION ***** BIG TIME!!!!!!!!

    Easy check this out http://www.youtube.com/watch?v=be09gGFw-
    Pass it along, this is the worst program EVER!!!!!!

  • Is there any possible way to roll back version 5 of Firefox? cause v6 kinda slows my system, and sometimes ends up freezing.

    Don't ask anymore questions about my add-ons, or whatever stuffs. I just want to know how can I roll back to the older version, PEROD.

    Unfortunately your suggestions didn't help me, although I really do appreciate your efforts. Finally I found a solution myself, thanks to the internet: it appears to be a problem, caused by Adobe's Flash Player The solution is described in this video, including the corresponding links to download a new flash player. It works fine for me: I installed it last saturday and not any strange behaviour so far: my G5 PowerPC quad with OSX 10.5.8 yet can view all kinds of videos and websites 'like in the earlier days' and so far no annoying pop ups ;-)
    http://www.youtube.com/watch?v=iCrAKhv3R_c

  • Roll back when trying to install iTunes with the version higher than 10.5

    I insall successfully with the iTunes with the version under 10.5. But my iPhone is not supported with those version. So I tried the new versions that are higher than 10.5 but a problem occurred during the installation.
    "An error occurred during the installation of assembly 'Microsoft.VC80.CRT,type="Win32",version=8.0.50727.6195",publicKeyToken="1fc8b3 b9a1e18e3b",processorArchitecture="x86"'
    Please refer to Help ans Support for more information. HRESULT:0x800736FD."
    When I click OK, it rolls back. Then it started to run the rest apps of iTunes.
    Anyone can help me, please!
    Thank in advance!

    Maybe no one can help!

  • I updated vietmobile remote files app. this app is broken on iOS 5.1.1 I do not have a backup of the previous version of the (paid) app, how can I roll back to the previous version? Is there a repository of previous versions? Am I boned?

    I updated vietmobile remote files app. this app is broken on iOS 5.1.1 I do not have a backup of the previous version of the (paid) app, how can I roll back to the previous version? Is there a repository of previous versions? Am I boned?
    Seems silly to not allow a rollback from a file repository of previous app versions.

    >All apps are tied to the account that downloaded it, so to be able to sync back the previous version you would need to still have your copy of that version
    I'm not sure I follow, I have not sync'd the ipad with my computer. I just saw an update in the app store and took it.
    I tried to del and install the app from the purchased tab in the app store, that reinstalled v2.1 of the app. This also fails to launch.
    I have made two service requests to the developer, no response at this time.
    Is there somewhere I can download and install Remote Files version 2 file? I can only find the new version 2.1 in the app store.

  • Rolling back version 10

    How do I  roll back to an earlier version?   11.1 is just too buggy -- I don't like the way it displays podcasts, and I can't add files (.mp3's) or folders.

    Hello Dr. Clocknik,
    Thank you for the details of the issue you are experiencing with video playback in iTunes.  You have taken some really great troubleshooting steps already, but I found an article with additional steps you can take.  I recommend reviewing the following article (you can skip any of the steps you have already tried):
    Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
    http://support.apple.com/kb/TS1718
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

Maybe you are looking for