Version Tab in contract

Hi Experts,
When modifying the contract by using transaction code ME32K during saving there is an error ENTER REASON FOR CHANGE FOR VERSION but unable to get any place for giving reason for change or version?
Best Regards,
Varun Bisaria

Hi Arif,
Please follow the steps mentioned in the below link.
Create Additional data tab in Rfx/Response/Contract
Thanks and Regards,
Shakeer Hussain

Similar Messages

  • ISSUE:regarding production version tab of MRP4 of  data transfer using BD10

    Hi all,
    This is regarding production version tab of MRP4 of  data transfer using ALE idoc (BD10).
    When i transfer the data using BD10 the production version is received at receiving end through segment
    but not created in MRP4 view tab.An error is coming as-
    "You wanted to maintain the master record of the material AB_06.04.09(2). However, it is already being processed by the user EBGABAP and is therefore locked."
    I logged in as-EBGABAP
    Please help me resolve the issue.
    Thanks
    Edited by: sanu debu on May 6, 2009 11:08 AM
    Edited by: sanu debu on May 6, 2009 11:09 AM
    Edited by: sanu debu on May 6, 2009 11:11 AM

    >
    sanu debu wrote:
    > Hi,
    > I have to upload production version tab data of  MRP4 view(MM01).Please suggest a function  moduleor bapi  for the same.
    >
    > Thanks.
    >
    > Edited by: sanu debu on May 6, 2009 3:24 PM
    BAPI_MATERIAL_SAVEDATA can be used, populate the respective fields in input parameter PLANTDATA

  • User-exit/BADI for version tab in ME22N

    Dear Friends,
    I have a requirement pertaining to user exit/BADI.
    In ME22n in version tab when ever we change any data of PO the Version Completed check box should be checked.
    Please let me know about the User Exit to be used and few lines of Pseudo code to proceed further.
    Thanks,
    Anshul

    Dear Dave,
    Check any enhancement Point is available to inlcude your logic in that place.
    With Regards,
    Selvan.M

  • BAPI/Function module for production version tab data of  MRP4 view(MM01).

    Hi,
    I have to upload production version tab data of  MRP4 view(MM01).Please suggest a function  moduleor bapi  for the same.
    Thanks.
    Edited by: sanu debu on May 6, 2009 3:24 PM

    >
    sanu debu wrote:
    > Hi,
    > I have to upload production version tab data of  MRP4 view(MM01).Please suggest a function  moduleor bapi  for the same.
    >
    > Thanks.
    >
    > Edited by: sanu debu on May 6, 2009 3:24 PM
    BAPI_MATERIAL_SAVEDATA can be used, populate the respective fields in input parameter PLANTDATA

  • Versioning Tab empty in SQL developer data modeler

    Hi I was wondering if anyone could help.
    I have installed Oracle SQL Develeoper Data Modeler 3.0.0.665.
    I am unable to save any projects.
    When I try I get no error and the saved project does not apper where I have selected to save.
    If I go to the versioning tab there is nothing in the drop down list.
    Everything works fine on an XP pc.
    I have installed this on Windows server 2003.
    Thanks in advance
    Patrick

    In the release notes it tells the certification:
    Platform Support and System Requirements
    Oracle SQL Developer Data Modeler runs on the following operating systems:
    - Microsoft Windows (XP, Vista, Windows 7 including x64)
    - Linux
    - Mac OS X
    Windows Server 2003 is not certified.

  • Payment Transaction tab in contract

    Hi all,
    Can anyone tell me how to get payment transaction tab at contract level (when we click on STP icon on top) as it comes in customer master (XD02).
    Edited by: Sunil SAP on Mar 27, 2009 7:07 PM

    There are couple of OSS notes 116732/179011 somewhat relevant to your issue.
    This can provide some help.
    Regards
    Sachin

  • Options under versioning tab

    Hi,
    What is the difference between the options available under "Versioning" tab
    "Commit" and "Commit Design", "Update", "Update Design "
    Thanks and Regards
    Sugirtha

    Hi Sugirtha,
    "Commit" and "Update" should work on a selection in Pending Changes, while "Commit All" and "Update All" should respectively commit and update all changes regardless of selection.
    I see that there is a bug and the "Commit" and "Commit All" have one and the same behavior, and "Update" and "Update All" have the same too.
    I will log a bug for that.
    Thanks and best regards,
    Ivaylo

  • New tab for Contract for data about products and product sales.

    Looking for ideas to implement a new tab on the Contract (RECN)
    We have some basic data about products and product sales that we want to have implemented on a screen tab for a contract.  The user needs to be able to enter information about a product, quantity, year grown, and tax info. And then each of these products may have one or many sales records showing date of sale, quantity sold, and a brief note.
    So a contract can have 1 or many products and a product can have one or many sales records.
    The user needs to be able to enter, update and delete any one of these records.  And, ideally, enter multiple of each before saving.
    Do any of you have ideas about how to go about this?  Using ALV grids? or table controls? I'm still wet behind the ears regarding doing screen development in SAP so am open to any and all suggestiions.
    SAP 6.4 is the version we are at.
    Thanks
    Laurie

    Maybe the original order to renew and keep unlimited data was cancelled because it was not an option. It wasn't a "bait-and-switch" The order was cancelled, it wasn't switched. When you called to reissue the order they told you the correct options so they did not switch you without your knowledge. The second rep was correct, he didn't lie, the first rep did. Verizon cancelled the order because if they didn't you would have been set up w/ new 2 year agreements on a tiered data plan, which would have been illegal. Thats why they cancelled it. So you can either not make the change, keep the unlimited data and buy the phones outright. Or switch, go to a tiered plan, and get new phones. By glitch they meant the system accidentally allowed you to keep the unlimited plan, though it was not an option. Verizon has had this rule since they removed the unlimited plan back in '11.
    << Full name of rep removed >>
    Message was edited by: Verizon Moderator

  • Additional Tab in Contract Header for SRM 7

    Hello,
    I have a requirement to add custom tabs into the Contract in SRM 7 (latest version)
    So I added custom fields in the header structure via config, the fields are visible in BBP_PDHSC. Also I did add additional tab into the contract using FPM configuration where I have attached the custom webdynpro component to it.
    Now the issue is the custom field values doesn't get updated into the system. The CLL layer class /SAPSRM/CL_CH_WD_BOM_CTR method submit_update doesn't get triggered for the custom fields whereas it gets triggered for standard fields. Also I noticed that the mt_mapper table has the /SAPSRM/WDC_CTR_DODC_H_BD as deactive..
    I think I am missing something in my custom component but cannot figure it. Could anyone please help me out with the update of custom fields into teh system..
    Thank you..

    Hi Arif,
    Please follow the steps mentioned in the below link.
    Create Additional data tab in Rfx/Response/Contract
    Thanks and Regards,
    Shakeer Hussain

  • Addition of new tabs under contract item screen in SRM 7.0

    Hello Experts,
    My requirement is to add the three new tabs with custom fields under the contract item screen.
    I thin i have to user web-dynpro ABAP for this requirement since it is SRM 7.0. Once i developm the web dynpro applications separately for each tab, how do i integrate those web dynpro with the contract item dynpro and how to populate the values for the new fields added in the tabs. if i want to fetch the data from the custom tables into the tabs, i need to create a new web dynpro where i will write the logic to fetch the values, but to fetch the values i should first get the input data from the contract scrren which is a standard application. In the new tabs, i need to display and edit values for demands ( purchase requisitions ) for that contract line items, so i sould get the material number, year of demand, purchasing organisation etc from the contract screen. So it means i have to enahnce the main screen for contract item.
    Please advise how to achieve this.
    I have seen the details for adding a new fields to the the contract item scrren and some oss notes  , but here i need to add the new tabs and custom fields into that and i need to integrate these data with the contract line item.
    Your help is very much appreciated
    Regards,
    Srinath

    Hi,
    I think you need to enhance the existing WebDynpro.
    Just FYI.  Good to know WebDynpro side enhancement techniques.
    6 series on User Interface flexibility in WebDynpro ABAP.
    http://www.sdn.sap.com/irj/scn/advancedsearch?query=%22abapUIFlexibility%22
    ABAP UI Flexibility Part 1: Demo Overview
    ABAP UI Flexibility Part 2: Floorplan Manager
    ABAP UI Flexibility Part 3: Feeder Classes
    ABAP UI Flexibility Part 4: BADIs
    ABAP UI Flexibility Part 5: BRF+
    ABAP UI Flexibility Part 6: Looking Ahead to 7.02
    Regards,
    Masa

  • How to get production version in your contract?

    hi all,
    I have already maintain multiple production versions for one product, but how can I let it appear in the contract item?
    thanks

    Hi,
    I think I have already answered this one. You can get the curent version either from wwv_usr_menus$ or wwv_modules$
    select version from wwv_modules$
    where id = <module_id>
    and status = 'PRODUCTION'
    This gives the version of the current production version.
    Thanks
    Sharmila

  • Component tab in Contract - ME33K

    Hi
    Where i can find component tab for subcontract(item category - L) - Contract display option - ME33K.
    Thanks...Gopi

    Hi,
    the following is the T.code hope you know
    ME31 Scheduling Agreement  create
    you can create fully finished order(std) .Incase of Subcontracting use item category "L"
    ME31K  SA create with Contracts , you can send subcontract material with this order.
    You cannot find the Component tab in the ME33K
    What is your requirement.
    G.GaneshKumar

  • How to obtain the active version of a contract?

    Function module BBP_PD_CTR_GETDETAIL and table CRMD_ORDERADM_H do not seem to filter the non-active contracts.
    How to get the active version only.

    It is at the item level. Refer to table BBP_PDIGP field ITM_RELEASED

  • Missing sub-workflow versions in PO, Contract, and Bid workflows

    In SRM 5.0, the definitions for the following workflow templates are missing:
    WS14000076, WS14000085, WS79000003. 
    These are sub-workflows used by WS14000075 (PO), WS14000086 (Contract), and WS79000010 (Bid).  Any feedback will be appreciated.
    Thank You,
    Kiran

    hi,
    14000076 Wait for BUS2201 Events
    14000085 Wait for BUS2000113 Events
    79000003 Wait for BUS2202 Events
    i have checked these and are available , these are all wait events.
    you can see the details in the tranaction
    1) Transaction ---> PFTC
    2) Enter Task type ---> Workflow template
    3) In the Task Enter ---> 14000085.
    4) click Display
    you can see the details , perform the same for other two to get details

  • Field "Reason for change" mindatroy in PO under "Version" tabe ?

    Hello Exp.,
    Is there any EXIT or BADI available to make "Reason for change" mandatory while changing PO in ME22N tcode.
    In SPRO, is there any standard location where we can make this field mandatory? .
    Input and suggestion is highly appreciable.
    Regards
    Sanjay

    Dear sir,
    go to SPRO-IMG-Materials Management-Purchasing-Version Management-Set Up Version Management for External Purchasing Documents.
    select your document type for which you want to make the required entry reason for change. and click details indicator(CtrlshiftF2). and in field selection Reason field make the Required entry.
    then when u r changing PO the system will ask required entry for reason for change.
    regards
    jrp

Maybe you are looking for

  • Trying to charge my iphone but the apple logo goes ond and off

    I am trying to charge my phone, and when I plug it to the mains or my pc wont charge, the apple logo comes one for seconds and goes off, the phone just got a new battery, what can I do?

  • Java error "invalid data page"

    Hi, I am hoping someone can please help me... I am trying to access a real site that show live scoring updates and everytime I try, it continually says that the site is loading in in my java console it states that the error is an "invalid data page".

  • How do I batch convert wav files to mp3?

    Just wondering how I can convert a batch of wav files into mp3 files (including metadata). I was looking thru features in both soundbooth and bridge, but I can't find it (if it exists). Thanls

  • Time Machine always prompting to Inherit Backup

    Setup: 1 x iMac A with External Hard Drive connected via Firewire (New iMac / Migration Assistant was used from Mac B) 1 x iMac B on the LAN (Old iMac been formatted and os reinstalled since MAssistant used) Both running Lion - Both using Time Machin

  • Question on Mail and MS Office?

    Sorry if this is the wrong topic heading.. I was having difficulty finding the correct one! Question is: I wish to paste tables etc from MS Excel for Mac into Mail and it does not like it! It wont accept the pastes. This maks life difficult for me as