Version to version Copy - in HR - Short dumps
Hello gurus,
I have a question regarding version to version copy in BPS.
1. We use the standard planning function copy.
2. We use variable called version from and version to to set the values.
After we went live it used to work fine for the last 6 months.
The copy function appears as a pushbutton in the ALV layout.
These are the steps the user does:
1. User sets the value - From version and To version for example in our case ; FFF and X90.copy version FFF to X90.
2.Then comes to the HR planning layout. executes the layout. Select the varsion range FFF - X90.The presses the push button - HR ver to ver copy. It shortdumped due to memory issue.
SAP consultant suggested to refer OSS note 546464 which is
Note 546464 - Partitioning of Planning Packages
Does anyone use the
UPC_BUNDLE_EXECUTE_STEP or
UPC_BUNDLE_EXECUTE_STEP_2
program.
How it works. I think we can execute the planning function in the background.
Anyone use the above program.
Please advise.
Thanks for your help.
Senthil
I've used UPC_BUNDLE_EXECUTE_STEP in the past; basically you can use it to schedule running a planning sequence in the background, similar to UPC_BUNDLE_EXECUTE. I used it in a similar situation to yours: maybe you are copying more data than before, or the system is busier.
You can get a description of UPC_BUNDLE_EXECUTE at
<a href="http://http://help.sap.com/saphelp_nw04/helpdata/en/d6/ce42b8dee611d3b7890000e82debc6/frameset.htm">UPC_BUNDLE_EXECUTE</a>
The basic difference is that the 'STEP' version divides up the data into chunks based on a characteristic, such as Region, defined in the Planning Level(s) as 'selection in package' . It is run from Ad-hoc package.
So from SE38, execute UPC_BUNDLE_EXECUTE_STEP, enter the planning sequence and Characteristic used for steps, and 'From' and 'to' values of the characteristic ( e.g. # and ZZZ).
Then execute in background, or schedule. If it fails, I sometimes ran in foreground to get some diagnostics.
Similar Messages
-
Buffer Table Not Up To Date Short Dump When Publishing Change Version of Bid Invitation
Hi experts,
We are running SRM 5.5 with Support Level 16.
We have a bid invitation for which a user is trying to publish a Change Version. This bid contains two bid outlines, with one line item in each bid outline:
ITEM 1: HIER (Bid Outline)
ITEM 2: Line Item
ITEM 3: HIER (Bid Outline)
ITEM 4: Line Item
However, upon clicking on the Check or Publish button, the system throws a CX_BBP_PD_ABORT exception short dump. The reason for the exception given in ST22 is "Buffer table not up to date".
Due to organisational system security restrictions, I am unable to copy-paste the dump from ST22, so I will be typing out some of the details here.
Transaction: BBP_BID_INV
Program: SAPLBBP_PDH
Screen: SAPLBBP_BID_INV_1000
Termination occurred in the ABAP program "SAPLBBP_PDH" - in "BBP_PD_ABORT". The main program was "SAPLBBP_BID_INV".
In the source code you have the termination point in line 73.
Active Calls/Events
(formatted below as "No: Type: Name")
24: Function: BBP_PD_ABORT
23: Form: ABORT
22: Form: ITMADM_UPDATE
21: Form: ITMADM_MAINTAIN_SINGLE
20: Form: ITEM_F_CHECK_FROM_WTAB
19: Form: ITEMLIST_F_CHECK
18: Function: BBP_ITEMLIST_CHECK
17: Form: PROCDOC_DB_CHECK
16: Form: PROCDOC_CHECK
15: Function: BBP_PROCDOC_CHECK
14: Form: SSIS_DOCUMENT_CHECK_COMPLETE
13: Form: STATUS_SET_AND_INTERNAL_SAVE
12: Form: PROCDOC_UPDATE
11: Function: BBP_PROCDOC_UPDATE
10: Form: CHANGE_VERSION_UPDATES_ACTIVE
9: Function: BBP_PDCV_UPDATE_ACTIVE
8: Form: PROCDOC_CHECK
7: Function: BBP_PROCDOC_CHECK
6: Function: BBP_PD_BID_CHECK
5: Form: FCODE_DOCUMENT_CHECK
4: Form: FCODE
3: Function: BBP_BID_PROCESS
2: Form: PROCESS
1: Module (PAI): PROCESS
The ABORT subroutine is being called in Step 22 (ITMADM_UPDATE), at the following line:
* parent guids have to be identical ...
if gt_itmadm-parent <> w_itmadm-parent.
perform abort.
endif.
Upon tracing the variable values in the ST22 dump, it appears the program terminates when processing line 3 (i.e. the second Bid Outline). It appears that the first Bid Outline processes fine.
In the iteration for Line 3, the dump provides that gt_itmadm-parent contains the GUID to the Change Version document header, whereas w_itmadm-parent contains the GUID to the original Bid Invitation document header, resulting in a mismatch and subsequently program termination.
We have tried to replicate this bid invitation in our Development environment, but when executing, both gt_itmadm-parent and w_itmadm-parent contain GUIDs to the Change Version document header, hence the program does not abort.
Any suggestions would be greatly appreciated.
Thanks!
Best regards,
Kwong HowHi Janu,
For Note 1561750, I have looked at the Correction Details and observed that it makes changes to an IF-ELSE block, but will result in the same path of code execution as before. I.e., the Note changes the code from "IF a THEN b, ELSE c" to just "c", but according to my code trace, we are already executing the "ELSE c" block in its current state.
We will look further into Note 1877600. The unfortunate situation here is that since we are unable to replicate this issue in our Development/QA environment, and the Note description does not explicitly fit the situation we are facing, we need to be very sure that the Note can address the issue before bringing it into Production.
Otherwise, we will raise a message as suggested.
Thank you so much for your help!
Best regards,
Kwong How -
Short Dump while copying Org structure from ERP to CRM
Hello Experts:
We are trying to copy the Org structure from ECC to CRM.
We have a standard transaction 'CRMC_R3_ORG_GENERATE' to copy the the org structure from ECC or the IMG path:
SPRO->CRM->Master Data->Organization Management->Data Transfer->Coppy ECC Sales Structure
We have a multiple assignment scenario where each sales groups are assigned to multiple sales offices and likewise,each sales office is assigned to multiple sales org unit in ECC.
This can be achieved by turning on the enhanced version.
In our current business,even though the sales offices and groups are created,but are not having relavance in the business,hence while running in the sandbox system, we ran the program to copy the structures in the standard mode(default) and we could copy it without issues and create the org units for every entity in CRM based on how the number ranges are defined.
What happens when enhanced version switch is turned on ::
While we turn the mode to enhanced version, The system automatically::
- enhances the Function tab page in the ppoma_crm transaction to include a grid table, in which you maintain multiple assignments of organizational units
- generates an extra dialog box to the Organization tab page in business transactions for you to select the relevant assignment path for the organizational unit
- adapts the consistency check in business transactions to take into account organizational units that have been multiple assigned
Risk factor :
Once you have switched to the enhanced backend integration version of the organizational model you cannot return to the standard backend integration version. The system will also automatically make changes to the organizational model version in CRM Mobile Sales.
Also this structure will happen across all the clients in the system,so unfortunately cannot try in a sandbox client also of the new environment.
We are building our development box,so while running the above step in standard mode,the program gives a short dump due to long execution time even though we have the same amount of data as in our prototype system.
Also, we increased the idle time value to a very high value.
When I approached SAP OSS,I was told that it is due to the multiple assignment scenario,hence we need to switch to enhanced version in CRM before we run the copy program ( CRMC_ORG_R3_GENERATE )
I am not quite sure if the mismatch of the scenarios between CRM and ECC could be causing this short dump as we could run it in standard mode in our prototype/sandbox environment without issues even with the same data volume as in the new development system .
I am looking for help from all the experts if they have come across similar issue and your recommendations/feedback if this can be corrected.
Appreciate your guidance/recommendation on this issue.
thanks!!In CRM Best Practices Building block C05 is the step by step description how to replicate Org. structure and some of employee's master data.
Follow link - http://help.sap.com/bp_crmv12007/CRM_DE/BBLibrary/html/C05_EN_DE.htm -
Dear All,
Budget Data is copied from one Version to another Version using Tools>copy Version option. How can you view Data copied to new Version, when you receive a message Version is successfully copied.
I think we can do that by selecting appropriate version in the version dimension while accessing the Forms or in Smart View.
Can you please let me know how to do this or different options available with this process.
Thanks in Advance for your valuable time...A form to check the data with the correct POV, a Smart View query, excel addin retrieve, financial report, export data, report script, take your pick.
Cheers
John
http://john-goodwin.blogspot.com/ -
PO copy in SRM 7 leads to short dump
Hello,
We are implementing SRM 7 Level 9 with ECS.
Each time we are trying to copy one PO we get a short dump :
http://XXX/sap/bc/webdynpro/sapsrm/wda_l_fpm_oif/
OBJECTS_OBJREF_NOT_ASSIGNED_NO
Access via 'NULL' object reference not possible.
Method: CHECK_COPY of program /SAPSRM/CL_PDO_DYN_MDA_HD_PO==CP
Method: /SAPSRM/IF_PDO_META_CONF_BO~GET_BO_HDR_ACTION_METADATA of program /SAPSRM/CL_PDO_META_CONF_PROV=CP
Method: /SAPSRM/IF_PDO_META_CONSUMER~GET_ACTION_METADATA of program /SAPSRM/CL_PDO_META_BO_PO=====CP
Method: /SAPSRM/IF_PDO_META_CONSUMER~GET_ACTION_METADATA of program /SAPSRM/CL_PDO_META_BO_PO_ADV=CP
Method: /SAPSRM/IF_PDO_META_CONSUMER~GET_ACTION_METADATA of program /SAPSRM/CL_PDO_META_HANDLER===CP
Method: UPDATE_ACTIONS of program /SAPSRM/CL_CH_WD_MAP_IDENT====CP
Method: /SAPSRM/IF_CLL_MAPPER~REFRESH of program /SAPSRM/CL_CH_WD_MAP_IDENT====CP
Method: OVERRIDE_LEAVE_INIT_SCREEN of program /SAPSRM/CL_FPM_OVRIDE_OIF=====CP
Method: /SAPSRM/IF_FPM_OVRIDE_EVT_OIF~OVERRIDE_EVENT_OIF of program /SAPSRM/CL_FPM_OVRIDE_OIF=====CP
Method: OVERRIDE_EVENT_OIF of program /1BCWDY/9OA8VNC7OSV3G978R0K5==CP
It occurs with PO created from scratch or generated from SC.
In st22 we have :
OBJECTS_OBJREF_NOT_ASSIGNED_NO CX_SY_REF_IS_INITIAL
Everything is full standard. We tried with a SAP ALL/SAP NEW user.
Thanks in adance for your helpHi,
Fix has been available.
https://service.sap.com/sap/support/notes/1513127
Regards,
Masa -
How to find Software version using a copy of software without installing
How to find Software version using a copy of software without installing
How to find Software version using a copy of software without installing
See answer given by Ahmed
Right click on setup file and select properties and then details tab.
http://social.msdn.microsoft.com/forums/sqlserver/en-US/c5424ffa-ce98-4899-ac0d-97cbcac10029/how-to-get-versionbuild-from-sql-install-media
You can also open Mediainfo.xml to see information from Installation file
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles -
Custom error message in user exit is giving Short dump
Hi All,
We have a scenario where in if any user try to create/Change/Delete particular types of contract in SAP system we have to issue error message
saying ZIN/ZIR contract creation/Change/Deletion is blocked in SAP. This has to be done from the web application. So we are putting below code
in user exit MV45AFZZ in the form USEREXIT_SAVE_DOCUMENT_PREPARE.
CONSTANTS: lc_vbcpic01 TYPE sy-uname VALUE u2018VBCPIC01u2019, u201CWeb application user ID
lc_zin TYPE vbak-auart VALUE u2018ZINu2019,
lc_zir TYPE vbak-auart VALUE u2018ZIRu2019,
lc_text(32) TYPE c VALUE u2018Check long text for more detailsu2019.
DATA: l_uname TYPE sy-uname.
CLEAR: l_uname.
MOVE sy-uname TO l_uname.
*If user ID is not the Web application ID then block the creation/Change/Deletion
IF l_uname NE lc_vbcpic01
AND ( vbak-auart EQ lc_zin
OR vbak-auart EQ lc_zir ).
MESSAGE e830(zv) WITH lc_text.
ENDIF.
This code is working fine while creating/Changing the contract i.e. Giving us error message so that user wonu2019t be able to create/change the contract.
But when we delete the contract from VA42, Control is coming to this message statement and is giving Short dump. Below is the error analysis of the dump.
Error Analysis:
During "Exit Command" processing, the program tried to send a " " message.
This is not allowed at this point in processing.
The program had to be terminated.
Screen name.............. "SAPMV45A"
Screen number............ 4001
If any one has come across such scenario/any work around for this problem please let me know your inputs. Your inputs are highly appreciated.
I am working on 4.6C version of SAP.
Note: When i issue information/Warning message contract is getting deleted after displaying the message.
Thanks,
Vinod.I exactly replicated the same in DELETE_DOCUMENT also
I am getting the Dump. I tried with exit also , but it continued and deleted. To avoid deletion we have to use Leave program or LEAVE TO CURRENT TRANSACTION.
Delete Function is Defined as EXIT command. so it is not possible to give error message. To convice you i just copied demo program and raised the error message.
it is also giving the dump.
copy the demo program DEMO_DYNPRO_AT_EXIT_COMMAND and make this change , information to error .
MODULE cancel INPUT.
MESSAGE e888(sabapdocu) WITH text-001 ok_code input1 input2.
IF ok_code = 'CANCEL'.
CLEAR ok_code.
LEAVE PROGRAM.
ENDIF.
ENDMODULE.
and see... -
Short dump while creating a plant.
Dear experts,
Iam getting a short dump whenever I try to create a plant and save it. Iam posting the contents of the dump ... Iam using Ecc 6.0 with Oracle as database. Kindly help me to resolve this ...
Runtime Errors RAISE_EXCEPTION
Date and Time 27.10.2007 17:10:59
Short text
Exception condition "DATA_INCONS_IN_EXIT_MANAGEM" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "CL_EXITHANDLER================CP" raised the
exception
condition "DATA_INCONS_IN_EXIT_MANAGEM".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"RAISE_EXCEPTION" " "
"CL_EXITHANDLER================CP" or "CL_EXITHANDLER================CM001"
"GET_INSTANCE"
or
"CL_EXITHANDLER================CP" "DATA_INCONS_IN_EXIT_MANAGEM"
or
"SAPLS_IMG_TOOL_5 " "DATA_INCONS_IN_EXIT_MANAGEM"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "BSLERP"
Network address...... "10.60.0.30"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x Intel 801586"
Character length.... 16 Bits
Pointer length....... 32 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "BSLERP"
Database type..... "ORACLE"
Database name..... "BTS"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Apr 2 2006 23:08:16"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "OCI_10103_SHARE "
Patch level. 52
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory consumption
Roll.... 8176
EM...... 17768808
Heap.... 0
Page.... 65536
MM Used. 12293456
MM Free. 1291704
User and Transaction
Client.............. 800
User................ "MURTHYTSN"
Language key........ "E"
Transaction......... "SPRO "
Program............. "CL_EXITHANDLER================CP"
Screen.............. "SAPLSZA1 0201"
Screen line......... 70
Information on where terminated
Termination occurred in the ABAP program "CL_EXITHANDLER================CP" -
in "GET_INSTANCE".
The main program was "SAPLS_IMG_TOOL_5 ".
In the source code you have the termination point in line 36
of the (Include) program "CL_EXITHANDLER================CM001".
Source Code Extract
Line
SourceCde
6
type_ref TYPE REF TO cl_abap_typedescr,
7
class_name TYPE seoclsname,
8
abs_type_classname TYPE string,
9
def_impl TYPE seex_boolean VALUE seex_false,
10
mig_enhspotname TYPE enhspotname,
11
is_impl TYPE enhboolean,
12
mig_badi_name TYPE enhbadiid.
13
14
CALL METHOD cl_exithandler=>get_class_name_by_interface
15
EXPORTING
16
instance = instance
17
IMPORTING
18
class_name = class_name
19
CHANGING
20
exit_name = exit_name
21
EXCEPTIONS
22
no_reference = 1
23
no_interface_reference = 2
24
no_exit_interface = 3
25
data_incons_in_exit_managem = 4
26
class_not_implement_interface = 5
27
OTHERS = 6.
28
CASE sy-subrc.
29
WHEN 1.
30
RAISE no_reference.
31
WHEN 2.
32
RAISE no_interface_reference.
33
WHEN 3.
34
RAISE no_exit_interface.
35
WHEN 4.
>>>>>
RAISE data_incons_in_exit_managem.
37
WHEN 5.
38
RAISE class_not_implement_interface.
39
ENDCASE.
40
41
CONCATENATE '\CLASS=' class_name INTO abs_type_classname.
42
43
Is the given instance initial?
44
IF NOT instance IS INITIAL.
45
CALL METHOD cl_abap_typedescr=>describe_by_object_ref
46
EXPORTING
47
p_object_ref = instance
48
RECEIVING
49
p_descr_ref = type_ref.
50
CHECK type_ref->absolute_name NE abs_type_classname.
51
ENDIF.
52
53
SELECT SINGLE mig_enhspotname mig_badi_name FROM sxs_attr INTO (mig_enhspotname,mig_badi_n
54
WHERE exit_name = exit_name.
55
Contents of system fields
Name
Val.
SY-SUBRC
4
SY-INDEX
1
SY-TABIX
0
SY-DBCNT
0
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
ADDR0200
SY-UCOMM
CHCK
SY-TITLE
Edit address: 5002
SY-MSGTY
SY-MSGID
SY-MSGNO
000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20071024
SY-UZEIT
171059
SY-XPROG
SAPCNVE
SY-XFORM
CONVERSION_EXIT
Active Calls/Events
No. Ty. Program Include Line
Name
43 METHOD CL_EXITHANDLER================CP CL_EXITHANDLER================CM001 36
CL_EXITHANDLER=>GET_INSTANCE
42 FUNCTION SAPLXSZAR ZXSZARU01 25
EXIT_SAPLSZAR_001
41 FUNCTION SAPLSZAR LSZARU01 108
ADDR_REGIONAL_DATA_CHECK
40 FORM SAPLSZA2 LSZA2F20 382
CHECK_ADDR1_DATA
39 FUNCTION SAPLSZA2 LSZA2U02 42
ADDR_CHECK
38 FUNCTION SAPLSZA0 LSZA0U01 79
ADDR_INSERT
37 FORM SAPLSZA1 LSZA1F22 1886
INSERT_ADDRESS_INTO_MEMORY
36 FORM SAPLSZA1 LSZA1F22 2234
PUT_ADDRESS_TO_MEMORY
35 FORM SAPLSZA1 LSZA1I02 409
D0100_OK_CODE
34 FORM SAPLSZA1 LSZA1F03 17
D0100_OK_CODE_WRAPPER
33 MODULE (PAI) SAPLSZA1 LSZA1I02 13
D0100_OK_CODE
32 FUNCTION SAPLSZA1 LSZA1U01 200
ADDR_DIALOG_INTERN
31 FUNCTION SAPLSZA1 LSZA1U05 177
ADDR_DIALOG
30 FORM SAPL0ORG LSVIMF24 292
ADDRESS_MAINTAIN
29 FORM SAPL0ORG LSVIMFX2 577
DETAIL_PAI
28 MODULE (PAI) SAPL0ORG LSVIMIXX 354
DETAIL_PAI
27 FORM SAPL0ORG LSVIMF2L 337
CALL_DYNPRO
26 FUNCTION SAPL0ORG L0ORGU34 35
VIEWPROC_V_T001W
25 FUNCTION SAPL0ORG L0ORGU33 49
VIEWFRAME_V_T001W
24 FUNCTION SAPLSVIM LSVIMU01 138
VIEW_MAINTENANCE
23 FUNCTION SAPLSVIM LSVIMU03 427
VIEW_MAINTENANCE_CALL
22 FORM SAPLS_CUS_ACTIVITY LS_CUS_ACTIVITYF01 358
START_SELECTED_TRANSACTION
21 MODULE (PAI) SAPLDSYH LDSYHI12 56
D1200_PAI_MODULE
20 FUNCTION SAPLDSYH LDSYHU11 70
OUTLINE_LIST_TCODES
19 FUNCTION SAPLS_CUS_ACTIVITY LS_CUS_ACTIVITYU07 103
S_CUS_ACTIVITY_EXECUTE
18 FUNCTION SAPLS_CUS_IMG_ACTIVITY LS_CUS_IMG_ACTIVITYU04 35
S_CUS_IMG_ACTIVITY_EXECUTE
17 FUNCTION SAPLS_IMG_TOOL_1 LS_IMG_TOOL_1U02 63
STREE_EXIT_TO_OBJECT_COBJ
16 FUNCTION SAPLSHI1 LSHI1U16 120
STREE_EXIT_TO_OBJECT
15 FORM SAPLSHI01 LSHI01F0Y 185
EXIT_TO_OBJECT_HC
14 FORM SAPLSHI01 LSHI01F05 70
HANDLE_LINK_CLICK
13 METHOD SAPLSHI01 LSHI01CI1 25
LCL_APPLICATION=>HANDLE_LINK_CLICK
12 METHOD CL_ITEM_TREE_CONTROL==========CP CL_ITEM_TREE_CONTROL==========CM013 53
CL_ITEM_TREE_CONTROL=>HANDLE_NODE_KEY_ITEM_NAME_EVT
11 METHOD CL_ITEM_TREE_CONTROL==========CP CL_ITEM_TREE_CONTROL==========CM00S 60
CL_ITEM_TREE_CONTROL=>HANDLE_EVENT
10 METHOD CL_GUI_COLUMN_TREE============CP CL_GUI_COLUMN_TREE============CM01O 15
CL_GUI_COLUMN_TREE=>HANDLE_EVENT
9 METHOD CL_TREE_CONTROL_BASE==========CP CL_TREE_CONTROL_BASE==========CM017 32
CL_TREE_CONTROL_BASE=>DISPATCH
8 METHOD CL_GUI_CFW====================CP CL_GUI_CFW====================CM001 138
CL_GUI_CFW=>DISPATCH
7 FORM SAPLSHI01 LSHI01F1M 17
EXECUTE_USER_COMMAND_W_EXITS
6 FUNCTION SAPLSHI01 LSHI01U12 30
STREE_BROWSER_PAI
5 MODULE (PAI) SAPLSHI01 LSHI01I01 55
PAI_200
4 FUNCTION SAPLSHI01 LSHI01U07 165
STREE_BROWSER_DYNP_HC
3 FUNCTION SAPLSHI21 LSHI21U03 144
STREE_EXTERNAL_DISPLAY
2 FORM SAPLS_IMG_TOOL_5 LS_IMG_TOOL_5F01 20
DISPLAY_REFERENCE_IMG
1 MODULE (PAI) SAPLS_IMG_TOOL_5 LS_IMG_TOOL_5I01 39
USER_COMMAND_0100
Chosen variables
Name
Val.
No. 43 Ty. METHOD
Name CL_EXITHANDLER=>GET_INSTANCE
EXIT_NAME
22222222222222222222
00000000000000000000
00000000000000000000
00000000000000000000
NULL_INSTANCE_ACCEPTED
2
0
0
0
ACT_IMP_EXISTING
2
0
0
0
INSTANCE
F0000000
F0000000
SY-REPID
CL_EXITHANDLER================CP
4454545444444533333333333333334522222222
3CF589481E4C52DDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
%_SPACE
2
0
0
0
CL_DRAGDROP=>COPY
1
0000
1000
CL_WB_REQUEST=>TO_IMMEDIATE_START
SY-SUBRC
4
0000
4000
CL_DRAGDROP=>USEDEFAULTEFFECT
4
0000
4000
SYST-REPID
CL_EXITHANDLER================CP
4454545444444533333333333333334522222222
3CF589481E4C52DDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
CL_GUI_CONTROL=>LIFETIME_DEFAULT
0
0000
0000
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ABS_TYPE_CLASSNAME
No. 42 Ty. FUNCTION
Name EXIT_SAPLSZAR_001
IV_NATION
2
0
0
0
X_ACCEPT_ERROR
2
0
0
0
X_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
X_DIALOG_ALLOWED
X
5
8
0
0
Y_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Y_RETCODE
2
0
0
0
ERROR_TABLE[]
Table IT_2299[0x572]
\FUNCTION-POOL=SZA1\FORM=INSERT_ADDRESS_INTO_MEMORY\DATA=ERROR_TABLE[]
Table reference: 208
TABH+ 0(20) = 00000000F8EB2E3D00000000D0000000FB080000
TABH+ 20(20) = 000000003C020000FFFFFFFF04A90100303E0000
TABH+ 40( 8) = 10000000C1248001
store = 0x00000000
ext1 = 0xF8EB2E3D
shmId = 0 (0x00000000)
id = 208 (0xD0000000)
label = 2299 (0xFB080000)
fill = 0 (0x00000000)
leng = 572 (0x3C020000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000317
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
shmTabhSet = Not allocated
id = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
shmVersId = Not allocated
shmRefCount = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
collHook = 0x00000000
ext2 = 0xD09AD03C
>>>>> 2nd level extension part <<<<<
tabhBack = 0x30F18E3D
delta_head = 000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
SY-XPROG
SAPCNVE
5454454222222222222222222222222222222222
3103E65000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SY-XFORM
CONVERSION_EXIT
444545544454545222222222222222
3FE65239FEF5894000000000000000
000000000000000000000000000000
000000000000000000000000000000
%_VIASELSCR
0
4
%_SPACE
2
0
0
0
SY-REPID
SAPLXSZAR
5454555452222222222222222222222222222222
310C83A120000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
LR_EXIT
F0000000
F0000000
%_DUMMY$$
2222
0000
0000
0000
Y_ERROR_TABLE
Table[initial]
No. 41 Ty. FUNCTION
Name ADDR_REGIONAL_DATA_CHECK
IV_NATION
2
0
0
0
X_ACCEPT_ERROR
2
0
0
0
X_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
X_DIALOG_ALLOWED
X
5
8
0
0
X_T005
800IN IND064 ININD000 00 15500 4111 0000 00 436 664000INDIEN 000 1
3334424443332222222222224444433322233233333223333223333233233322222233333344444423332322222222
8009E09E40640000000000009E9E40000000001550000411100000000004360000006640009E495E00000100000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Y_ADRC_REGIO
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Y_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Y_RETCODE
2
0
0
0
ERROR_TABLE[]
Table IT_2299[0x572]
SY-XPROG
SAPCNVE
5454454222222222222222222222222222222222
3103E65000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
LV_MAND
C
422
300
000
000
SY-REPID
SAPLSZAR
5454554522222222222222222222222222222222
310C3A1200000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
%_SPACE
2
0
0
0
%_CX_GRID_ID
1
0000
1000
SYST-REPID
SAPLSZAR
5454554522222222222222222222222222222222
310C3A1200000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SV_THERE_IS_CUST_EXIT
X
5
8
0
0
T005S
22222222222222
00000000000000
00000000000000
00000000000000
T005
00 000 00 00 00 00 0000 00 000 000
2222222223322222222222222222233322233233233222332223333233222222222222233322222223332222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
CO_ERROR
E
4
5
0
0
No. 40 Ty. FORM
Name CHECK_ADDR1_DATA
SY-MSGV3
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV4
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
FIELDNAME
222222222222222222222222222222
000000000000000000000000000000
000000000000000000000000000000
000000000000000000000000000000
C_NULL
0
0000
0000
RETURNCODE_ERRORS
2
0
0
0
C_ERROR_OCCURRED
E
4
5
0
0
H_ADRC_STRUC+0(1800)
2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ADDR1_DATA+460(1800)
2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
H_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
C_COMM_TTX
TTX
555
448
000
000
NATION
2
0
0
0
G_ACCEPT_ERROR
2
0
0
0
G_DIALOG_ALLOWED
X
5
8
0
0
T005
800IN IND064 ININD000 00 15500 4111 0000 00 436 664000INDIEN 000 1
3334424443332222222222224444433322233233333223333223333233233322222233333344444423332322222222
8009E09E40640000000000009E9E40000000001550000411100000000004360000006640009E495E00000100000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
TSAD6T
222222222222222222222222222222222222222222222222
000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000
ERROR_TABLE[]
Table IT_2299[0x572]
%_SPACE
2
0
0
0
No. 39 Ty. FUNCTION
Name ADDR_CHECK
ADDRESS_HANDLE
8005002
3333333222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
8005002000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ADDRESS_NUMBER
2222222222
0000000000
0000000000
0000000000
ADDRESS_OBJECT_TYPE
1
3
1
0
0
NATION
2
0
0
0
RETURNCODE
2
0
0
0
ERROR_TABLE[]
Table IT_2299[0x572]
ADDRESS_DATA_1
00000000000000000003XYZ SOLUTIONS LIMITED
3333333333333333333355525445544452444454422222222222222222222222222222222222222222222222222222
0000000000000000000389A03FC549FE30C9D945400000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ADDRESS_DATA_2
0000000000000000
3333333333333333222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ADDRESS_DATA_3
0000000000000000
3333333333333333222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
LV_ADRC_STRUC+0(1800)
2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ADDRESS_DATA_1+460(1800)
2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
C_DEFAULT_HANDLE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SYST-REPID
SAPLSZA2
5454554322222222222222222222222222222222
310C3A1200000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
ERROR_TABLE
000
2222222222222222222223332222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
LV_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
C_DEFAULT_NATION
2
0
0
0
C_SHOW_ALL
2
0
0
0
C_PERSONAL_ADDRESS
2
3
2
0
0
SY-REPID
SAPLSZA2
5454554322222222222222222222222222222222
310C3A1200000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
ADDRESS_DATA_2+32(1800)
2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
No. 38 Ty. FUNCTION
Name ADDR_INSERTDear Sunil,
Thanks a lot for your reply. I did search in service market place for notes regarding this problem. However, i could not find possible solutions to resolve this. I will once again search the notes in case if i have missed something. in case, if you come across any solutions to resolve this problem, Kindly post that here and that would be a great help for me.
Regards,
Chaitanya -
Getting short dumps while reading bulky data from excel sheet
Hi all,
We have converted our non-unicode based sap system (R/3 4.7, Windows 2003,
SQL 2000) into a unicode based system recently. We are facing two peculiar
problems for last few days.
*Problem 1 - *Whenever we want to upload the data from excel sheet, the
system throws a dump after reading about 400 entries, while last week the
same system used to read about 8000 entries in a single go.
*Problem 2 - *Also, whenever we realease a transport requst from development
containing a lot of changes, the request will reach the quality system but
without the changes. but if i ll try to import the changes into quality
system after generating more than one request containing small small
changes, they get reflected in QAS immediately. Is there any size
constraint in transporting a request fro DEV->QAS->PRD.
Please suggest some ways.
I am pasting the dump (that I am getting while data uploading from Excel).
~~~~~~~~~~~~~~~~~~
Runtime errors
MESSAGE_TYPE_X*
Occurred on
22.02.2008 at
13:21:02*
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
Short text of error message:
Control Framework : Error processing control
Technical information about the message:
Diagnosis
An error occurred when the system tried to process the commands
from the Automation Queue on the presentation server.
There are several possible reasons for this:
- The installation of the SAP GUI on the presentation server is
faulty or obsolete.
- There is an error in the application program
- There is an error in the SAPGUI or an integrated control
Procedure
1. Make sure that you have imported the appropriate Support
Package, the current kernel, and GUI patch for the release of your
System
2. Check whether the error occurs locally on one or a few PCs, or
generally on all PCs. Note whether the error only occurs for some
users, for example because of a specific Customizing setting.
If it only occurs locally, this suggests an installation problem
with the PC. Check the installation; if necessary, reinstall the
software. In the dump, search for the SY-MSGLI field, since it may
point to the cause of the error.
3. Activate the Automation Trace (in accordance with SAP Note
158985).
4.Start the transaction and continue until the screen immediately
before the dump.
5. From the System -> Utilities menu, choose Autom. Queue,
Synchronous Processing.
The status bar of the GUI displays the text:
"Automation synchron flush mode on"
6. If you now proceed with the application, the short dump will
display the ABAP call that caused the error; the Automation Trace
will contain the error on the presentation server.
7. If necessary, load the short dump and trace files on to
sapservX, so that SAP can analyze them.
Message classe...... "CNDP"
Number.............. 006
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"MESSAGE_TYPE_X" C
"SAPLOLEA" or "LOLEAU02"
"AC_SYSTEM_FLUSH"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "620"
Application server....... "nhbho930"
Network address.......... "192.168.0.30"
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "4x Intel 801586"
Character length......... 16 Bits
Pointer length........... 32 Bits
Work process number...... 0
Short dump setting....... "full"
Database server.......... "NHBHO930"
Database type............ "MSSQL"
Database name............ "DEV"
Database owner........... "dev"
Character set............ "C"
SAP kernel............... "640"
Created on............... "Aug 17 2007 00:18:58"
Created in............... "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version......... "SQL_Server_8.00 "
Patch level.............. "196"
Patch text............... " "
Supported environment....
Database................. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version..... "640"
Operating system......... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2,
Windows NT 6.0"
User, transaction...
Client.............. 300
User................ "NHBABAP"
Language key........ "E"
Transaction......... "SE38 "
Program............. "SAPLOLEA"
Screen.............. "SAPMSDYP 0010"
Screen line......... 0
Information on where terminated
The termination occurred in the ABAP program "SAPLOLEA" in
"AC_SYSTEM_FLUSH".
The main program was "ZBDC_CONTRACT ".
The termination occurred in line 29 of the source code of the (Include)
program "LOLEAU02"
of the source code of program "LOLEAU02" (when calling the editor 290).
~~~~~~~~~~~~~~~~~~~~~
Thank you all.
Cheers.
Mitra __.____._for the 50 millionth time: Excel spreadsheets are NOT databases, you should NOT try to use them as such and NEVER access them using JDBC.
You should also under NO condition use the JDBC-ODBC bridge driver (that was actually the 78 millionth time that was told someone). -
Short Dump while Activating a Heirarchy
Hi Experts,
I have a hierarchy which is in M version, I am trying to copy hierarchy from Quality to Dev system.
The hierarchy in DEV system is in M version. When I try to activate the Hierarchy I am getting a short dump which I am not able to understand.
I have tried also with the ABAP programe to activate it but still I am getting this.
Sorry to paste all the dump but can any one advise what could be reasons behind heirarchy not getting activated.
Thanks,
Tati.
Please find the Dump message.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_RSSH_MESSAGE_HANDLER=======CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
Only message types A, E, I, W, S, and X are allowed.
Information on where terminated
Termination occurred in the ABAP program "CL_RSSH_MESSAGE_HANDLER=======CP" -
in "CALL_MESSAGE".
The main program was "RSSH_HIERM_START_NEU ".
In the source code you have the termination point in line 11
of the (Include) program "CL_RSSH_MESSAGE_HANDLER=======CM003".
Source Code Extract
Line SourceCde
1 METHOD call_message .
2
3 FIELD-SYMBOLS: <l_s_msg> TYPE gt_s_msg.
4
5 READ TABLE p_t_msg INDEX 1 ASSIGNING <l_s_msg>.
6 IF sy-subrc <> 0.
7 MESSAGE x000.
8 ENDIF.
9
10 <l_s_msg>-handled = rs_c_true.
>>>>> MESSAGE ID <l_s_msg>-msgid TYPE <l_s_msg>-msgty NUMBER <l_s_msg>-msgno
12 WITH <l_s_msg>-msgv1 <l_s_msg>-msgv2 <l_s_msg>-msgv3 <l_s_msg>-msgv4.
13
14
15 ENDMETHOD. "CALL_MESSAGEHi Prasad,
Have you changed the 'Object Status' from INA to ACT when using the program RSDG_TRFN_ACTIVATE?
You can also refer to the note SAP Note 1030987 - Activation of transformations dumps
regards,
Ashvin -
Short dump on production server
ABAP runtime errors GETWA_NOT_ASSIGNED
Occurred on 28.12.2007 at 11:16:11
>> Short dump has not been completely stored. It is too big.
Field symbol has not yet been assigned.
What happened?
The current ABAP/4 program "SAPLCEI0 " had to be terminated because
one of the statements could not be executed.
This is probably due to an error in the ABAP/4 program.
What can you do?
Note the actions and input that caused the error.
Inform your SAP system administrator.
You can print out this message by choosing "Print". Transaction ST22
allows you to display and manage termination messages, including keeping
them beyond their normal deletion date.
Error analysis
You attempted to access an unassigned field symbol
(data segment 2941).
This error occurs:
- if you address a typed field symbol before it has been set with
ASSIGN or
- if you address a field symbol that has been reset with UNASSIGN
or pointed to a local field that no longer exists, or
- if you address a field symbol that pointed to a line of an internal
table that has now been deleted, or
- if you address a global function interface partameter, even
though the relevant function module is not active,
i.e. it is not in the list of active calls. You can get the list
of active calls from the this short dump.
How to correct the error
If the error occurred in a non-modified SAP program, you may be
able to find a solution in the SAP note system.
If you have access to the note system yourself, use the following
search criteria:
"GETWA_NOT_ASSIGNED"
"SAPLCEI0 " or "LCEI0U29 "
"CEI0_DDB_HAS_VALUES_INTERNAL"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "46C"
Application server....... "SAPCLUN"
Network address.......... "172.18.112.20"
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "16x Intel 80158"
Database server.......... "DBCLUN"
Database type............ "MSSQL"
Database name............ "PRD"
Database owner........... "dbo"
Character set............ "English_United State"
SAP kernel............... "46D"
Created on............... "Apr 9 2006 21:37:58"
Created in............... "NT 4.0 1381 Service Pack 6 x86 MS VC++ 12.00"
Database version......... "SQL_Server_7.00 "
Patch level.............. "2225"
Patch text............... " "
Supported environment....
Database................. "MSSQL 6.5.213 or higher, MSSQL 7.0.1 or higher"
SAP database version..... "46D"
Operating system......... "Windows NT 4.0, Windows NT 5.0, Windows NT 5.1,
Windows NT 5.2, , System build information:,
, LCHN : "
User, transaction...
Client.............. 400
User................ "QPBASIC"
Language key........ "E"
Transaction......... "QA02 "
Program............. "SAPLCEI0 "
Screen.............. "SAPLQPL1 0200"
Screen line......... 34
Information on where termination occurred
The termination occurred in the ABAP/4 program "SAPLCEI0 " in
"CEI0_DDB_HAS_VALUES_INTERNAL".
The main program was "SAPLQPL1 ".
The termination occurred in line 49
of the source code of program "LCEI0U29 " (when calling the editor 490).
Source code extract
000190 *" EXCEPTIONS
000200 *" NOT_FOUND
000210 *"----
000220
000230 DATA:
000240 ls_charac TYPE api_char,
000250 lt_charac TYPE STANDARD TABLE OF api_char,
000260 ls_vali TYPE api_vali.
000270
000280 DATA: ls_mi TYPE ts_mi,
000290 ls_wi TYPE ts_wi,
000300 ls_icv TYPE ts_value,
000310 ls_defval TYPE ts_defval,
000320 ls_inco_val TYPE ts_inco_val,
000330 ls_char_list TYPE ts_char_list,
000340 lv_subrc TYPE sy-subrc,
000350 lv_kntype TYPE cukntype.
000360
000370 data: ls_vallist TYPE ddb_c04, "676840
000380 lt_vallist TYPE STANDARD TABLE OF ddb_c04, "676840
000390 ls_restrict type ddb_c03, "699141
000400 lt_restrict type STANDARD TABLE OF ddb_c03, "699141
000410 lv_rflag type c. "676840
000420
000430 *----
000440 REFRESH exp_values.
000450
000460 DESCRIBE TABLE imp_characteristics LINES sy-tfill.
000470 IF sy-tfill EQ 0.
000480 LOOP AT
INTO ls_char_list.
000500 ls_charac-atinn = ls_char_list-atinn.
000510 APPEND ls_charac TO lt_charac.
000520 ENDLOOP.
000530 ELSE.
000540 lt_charac = imp_characteristics[].
000550 ENDIF.
000560
000570 LOOP AT lt_charac
000580 INTO ls_charac.
000590 IF ls_charac-atnam NE space.
000600 * input: name
000610 PERFORM read_mi_with_atnam
000620 USING
000630 ls_charac-atnam
000640 CHANGING
000650 lv_subrc
000660 ls_mi.
000670 ELSE.
000680 * input: atinn
Contents of system fields
SY field contents..................... SY field contents.....................
SY-SUBRC 0 SY-INDEX 0
SY-TABIX 0 SY-DBCNT 1
SY-FDPOS 1 SY-LSIND 0
SY-PAGNO 0 SY-LINNO 1
SY-COLNO 1
Chosen variables
Name.......................... Contents.1........2........3....+....4
PROP_BITMAP 310
3000
6100
ALLOWED_VALUES
2
0
PROP_WIDTH 300
2000
C100
ASSIGNED_VALUES X
5
8
TOP_WINDOW 33
2000
1000
ASSIGNED_VALUES_API_DI
2
0
PROP_INDEX 350
5000
E100
DEFAULT_VALUES
2
0
DYNPRO_9 19
1000
3000
DEFAULT_VALUES_API_DN
2
0
DYNPRO_8 18
1000
2000
DEFAULT_VALUES_API_ST
2
0
DYNPRO_7 17
1000
1000
DOCUMENT_INFO
2
0
PROP_SOUND 340
5000
4100
FIRST_ASSIGNED_VALUE
2
0
PROP_TEXT 330
4000
A100
INCONSISTENT_VALUES
2
0
LANGUAGE E
4
5
SY-LANGU E
4
5
PROP_BITMAP_STYLE 320
4000
0100
VALID_VALUES
2
0
PROP_FONT_SIZE 380
7000
C100
EXP_VALUES[] #########################À##°###########
0000000000000000000000000C00B00000000000
00000000000000000000000040000A0000000000
... + 40 ################ÿÿÿÿ####################
0000000000000000FFFF00000000000000000000
1000000000001000FFFF81007000430000000000
... + 80 ################################
00000000000000000000000000008000
00000000000000000000000000004100
PROP_ITEM 370
7000
2100
IMP_CHARACTERISTICS[] #########################À##############
0000000000000000000000000C00800000000000
00000000000000000000000040000A0000000000
... + 40 ################ÿÿÿÿI###################
1000000000000000FFFF40000000000000000000
0000000000000000FFFF90002000430000000000
... + 80 ################################
00000000000000000000000000008000
00000000000000000000000000005100
SCREEN-ACTIVE 0
3
0
SY-XPROG SAPCNVE
5454454222222222222222222222222222222222
3103E65000000000000000000000000000000000
TVS_EDITLABELS 6
0000
6000
SY-TFILL 0
0000
0000
INCL_PRICE 0000
3333
0000
LS_CHAR_LIST 00000000000000000000
3333333333333333333322222222222
0000000000000000000000000000000
RSJOBINFO 00000000
2222222222222222222222222222222233333333
0000000000000000000000000000000000000000
... + 40 000000
3333332222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 80 ####
0000
0000
SYST ########################################
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
... + 40 ####################################I###
0000000000000000000000000000000000004000
1000100010000000100000000000000000009000
... + 80 ########################################
0000000000000000100000000000000000000000
0000000000000000E00000000000000000000000
... + 120 ####################################p###
00000000
0000000
LT_CHARAC Table[initial]
0000FFFD
0000FFFF
LS_CHARAC 0000000000
3333333333222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40
222222222222222222222222222222222
000000000000000000000000000000000
SPACE
2
0
Active calls / events
No.... Type........ Name..........................
Programm
Include Line
1 FUNCTION CEI0_DDB_HAS_VALUES_INTERNAL
SAPLCEI0
LCEI0U29 49
2 FUNCTION QMCF_CONFIGURATION_READ
SAPLQMCF
LQMCFU02 61
3 FUNCTION QMCF_SPECIFICATION_CONFIG_READ
SAPLQMCF
LQMCFU01 60
4 FUNCTION QPAP_PLAN_READ
SAPLQPAP
LQPAPU02 297
5 FUNCTION QEEV_TABLES_GENERATE
SAPLQEEV
LQEEVU01 118
6 FORM MERKMALSSAETZE_ANLEGEN
SAPLQPL1
LQPL1F12 85
7 FORM ST_RECHNE_571
SAPLQPL1
LQPL1F1L 26
8 FORM OK_PROBENBERECHNUNG
SAPLQPL1
LQPL1F1W 23
9 FORM FCODE_BEARBEITEN
SAPLV00F
LV00FF0F 97
10 FUNCTION SCREEN_SEQUENCE_CONTROL
SAPLV00F
LV00FU02 46
11 FORM FCODE
SAPLQPL1
LQPL1F2D 61
12 MODULE (PAI) FCODE
SAPLQPL1
LQPL1I0P 11
Internal notes
The termination occurred in the function "getwa_abswa" of the SAP
Basis System, specifically in line 1003 of the module
"//bas/46D/src/krn/runt/abgetwa.c#20".
The internal operation just processed is "LOOP".
The internal session was started at 20071228111310.
Active calls in SAP kernel
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Callstack without Exception:
App : disp+work.EXE (pid=500)
When : 12/28/2007 11:16:13.65
Threads : 2
Computer Name : ELEPRDCI
User Name : prdadm
Number of Processors: 16
Processor Type: x86 Family 15 Model 4 Stepping 8
Windows Version : 5.2 Current Build: 3790
Stack Dump for Thread Id a5c
eax=00000000 ebx=000003a8 ecx=00000e58 edx=00000000 esi=000003a8 edi=00000000
eip=7c82ed54 esp=03138cc4 ebp=03138d34 iopl=0 nv up ei ng nz ac po cy
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000297
function : KiFastSystemCallRet
7c82ed54 c3 ret
7c82ed55 8da42400000000 lea esp,[esp] ss:03138cc4=7c822124
7c82ed5c 8d642400 lea esp,[esp] ss:40cd7cc3=????????
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
03138d34 77e6ba12 000003a8 0001d4c0 00000000 03138d6c ntdll!KiFastSystemCallRet
03138d48 00baaa71 000003a8 0001d4c0 77bf1d88 00000002 kernel32!WaitForSingleObject
03138d6c 004d113b 004d10fc 77bf1d88 77bf1d88 77bf1d88 disp+work!
04b5ffb8 77e66063 00215740 00000000 00000000 00215740 MSVCRT!endthreadex
04b5ffec 00000000 77bcb4bc 00215740 00000000 00000000 kernel32!GetModuleFileNameA
List of ABAP programs affected
Type
Program
Gen. date time
LoadSize
Prg
SAPLQPL1
17.09.2006 09:35:11
479232
Prg
SAPMSSYD
14.08.2000 15:39:21
16384
Prg
SAPFSYSCALLS
21.12.1999 19:32:31
7168
Prg
CL_EXITHANDLER================
18.12.2004 13:14:45
13312
Prg
CL_ABAP_TYPEDESCR=============
04.01.2000 19:06:00
17408
Prg
CL_ABAP_ELEMDESCR=============
04.01.2000 19:06:00
13312
Prg
CL_ABAP_DATADESCR=============
04.01.2000 19:06:00
11264
Prg
CL_ABAP_REFDESCR==============
04.01.2000 19:06:00
14336
Prg
CL_ABAP_STRUCTDESCR===========
04.01.2000 19:06:00
16384
Prg
CL_ABAP_COMPLEXDESCR==========
04.01.2000 19:06:00
11264
Prg
CL_ABAP_TABLEDESCR============
04.01.2000 19:06:00
16384
Prg
CL_ABAP_CLASSDESCR============
04.01.2000 19:06:00
23552
Prg
CL_ABAP_OBJECTDESCR===========
04.01.2000 19:06:00
28672
Prg
CL_ABAP_INTFDESCR=============
04.01.2000 19:06:00
21504
Prg
IF_EX_INSPECTIONLOT_UPDATE====
13.07.2002 00:12:42
5120
Typ
SXS_INTER
30.11.1998 15:55:16
1024
Prg
SAPLSEXV
17.09.2006 08:50:01
155648
Prg
SAPLSXCH
18.12.2004 13:22:27
80896
Typ
V_EXT_ACT
14.10.1999 22:16:55
2048
Prg
CL_EX_INSPECTIONLOT_UPDATE====
13.07.2002 00:12:42
26624
Prg
SAPLV00F
08.03.2001 10:01:57
68608
Typ
T185E
15.07.1997 16:57:08
2048
Typ
T185F
14.08.1997 21:32:52
2048
Typ
T185
16.08.2000 11:43:40
3072
Typ
T185V
10.11.1999 17:45:26
4096
Typ
TQ01
14.02.1998 14:07:17
2048
Prg
SAPLSTXD
17.09.2006 08:53:44
406528
Prg
SAPCNVE
04.01.2000 19:06:37
7168
Prg
SAPLLANG
04.01.2000 19:06:49
9216
Prg
SAPLV01Z
17.09.2006 09:34:42
210944
Prg
SAPLCLFM
17.09.2006 09:34:56
688128
Prg
SAPLCUOB
17.09.2006 09:18:21
34816
Prg
SAPLCLSE
13.02.2005 06:50:14
177152
Prg
SAPLCTMS
17.09.2006 09:34:59
942080
Prg
SAPLCTCV
17.09.2006 09:27:23
192512
Prg
SAPLCTCF
12.02.2005 20:42:31
24576
Prg
SAPLV01P
17.09.2006 09:34:42
166912
Prg
SAPLMFAW
18.12.2004 14:02:28
51200
Typ
TFAWY
29.07.1998 19:48:52
2048
Typ
TFAWL
29.07.1998 19:48:49
2048
Typ
TFAWX
29.07.1998 19:48:51
2048
Typ
TFAW
29.07.1998 19:48:45
2048
Prg
RDDFIE00
04.01.2000 19:06:11
19456
Prg
SAPLQAST
13.02.2005 07:23:55
28672
Prg
SAPLBSVA
17.09.2006 09:02:09
270336
Prg
SAPLQSTA
20.01.2000 10:08:08
26624
Typ
TQ01A
29.07.1998 19:56:34
2048
Prg
SAPLOMCV
04.01.2000 19:06:50
14336
Typ
TMCNV
24.02.1999 03:33:25
2048
Prg
SAPLSCNT
15.11.2001 05:19:20
28672
Prg
SAPLSVSM
15.11.2001 05:19:20
25600
Prg
SAPLSGUI
15.11.2001 05:19:20
33792
Prg
SAPLSTTM
17.09.2006 08:49:52
83968
Prg
SAPLSBDC
17.09.2006 08:46:17
66560
Prg
CL_DATAPROVIDER===============
15.11.2001 05:19:18
50176
Typ
OBJ_RECORD
14.02.1998 08:30:43
2048
Prg
SAPLSTUP
17.09.2006 08:46:10
96256
Prg
SAPLCNDP
17.09.2006 08:53:21
201728
Prg
SAPFGUICNTL
18.12.2004 11:31:41
20480
Prg
SAPLOLEA
12.07.2002 21:39:11
81920
Prg
SAPLSFES
17.09.2006 08:53:22
164864
Prg
SAPLGRFC
12.07.2002 21:39:11
16384
Prg
SAPSHDTV
18.12.2004 12:16:52
36864
Typ
SHDSTU
14.12.1998 23:15:34
1024
Typ
SHDSTCIU
14.12.1998 23:15:34
1024
Prg
CL_GUI_PROPS_CONSUMER=========
18.12.2004 11:27:30
26624
Prg
CL_DYNAMIC_GUI_EXTENSIONS=====
11.02.2000 14:36:06
55296
Prg
CL_GUI_DATAMANAGER============
18.12.2004 11:34:01
82944
Prg
/1BCDWBEN/SAPLQEN0000
13.07.2002 02:11:40
51200
Prg
SAPLSENA
04.01.2000 19:06:53
28672
Prg
SAPLQELA
17.09.2006 09:27:48
415744
Typ
QALS
13.07.2002 00:12:42
27648
Prg
SAPLQAUT
13.02.2005 01:25:27
177152
Prg
SAPLSWUG
17.09.2006 08:53:33
264192
Typ
SWOTOBJID
04.05.1995 15:20:52
2048
Typ
SWHACTOR
04.04.1995 16:18:07
1024
Prg
CL_GOS_MANAGER================
17.09.2006 08:53:30
24576
Prg
CL_GOS_VIEW_MANAGER===========
21.12.1999 19:23:29
29696
Typ
SGOS_MVOBJ
01.12.1999 08:16:05
2048
Prg
SAPLSUU1
17.09.2006 08:53:37
183296
Typ
USR02
15.11.2001 05:09:06
5120
Typ
USREFUS
18.12.2004 11:18:28
1024
Prg
SAPLTHFB
17.09.2006 08:53:29
270336
Typ
BORIDENT
28.08.1997 08:38:50
1024
Prg
CL_GOS_TOOLBOX_MODEL==========
17.09.2006 08:53:30
39936
Typ
SGOS_MODL
08.02.2000 16:42:30
3072
Prg
SAPLBDLS
14.08.2000 15:20:53
13312
Typ
T000
11.09.1997 10:17:18
3072
Prg
CL_GOS_PUBLICATION============
17.09.2006 08:53:30
24576
Prg
CL_GUI_OBJECT=================
15.11.2001 05:19:18
187392
Prg
CL_GUI_CFW====================
18.12.2004 13:28:20
195584
Typ
TOLE
29.07.1998 19:56:01
2048
Prg
SAPLSGOSHIST
17.09.2006 08:53:33
56320
Prg
SAPFSGOS
08.11.2003 23:57:36
13312
Typ
SGOSHIST
14.10.1999 22:09:01
2048
Prg
SAPLURFC
04.01.2000 19:08:13
14336
Prg
CL_GOS_STARTER================
09.12.1999 13:49:28
21504
Prg
CL_GUI_CONTROL================
08.11.2003 23:57:31
117760
Prg
CL_GUI_TOOLBAR================
15.11.2001 05:19:18
72704
Prg
CL_GUI_GOS_CONTAINER==========
01.02.2000 10:16:37
38912
Typ
CFW_LINK
01.12.1999 12:16:48
2048
Prg
CL_GUI_CONTAINER==============
15.11.2001 05:19:18
58368
Prg
SAPLCNTH
08.11.2003 23:56:48
26624
Prg
SAPLSCONTROLINFO
04.01.2000 19:06:52
13312
Prg
SAPLSCONTROLSTATUSCHECK
04.01.2000 19:06:52
10240
Typ
USR05
09.07.1997 23:46:52
1024
Typ
CNTLWARN
25.01.1999 13:09:44
2048
Prg
SAPLICON
17.09.2006 08:39:01
25600
Prg
%_CICON
14.08.2000 15:39:36
55296
Typ
JSTO
27.08.1994 20:32:55
2048
Typ
JEST
27.08.1994 20:32:50
2048
Prg
SAPLAIEV
15.11.2001 05:18:17
14336
Prg
CL_OS_TRANSACTION_END_NOTIFIER
18.12.2004 13:21:30
8192
Typ
LFA1
13.07.2002 01:08:16
12288
Prg
SAPLCPDB
17.09.2006 09:17:36
113664
Typ
PLKO
15.01.1999 22:26:42
9216
Prg
SAPLCCPR
17.09.2006 09:09:14
231424
Typ
TCC08
17.03.1999 16:30:21
4096
Typ
AEEF
13.02.2005 06:49:14
3072
Typ
TCC10
23.04.1998 14:45:07
2048
Typ
TCCET
28.08.1997 09:33:24
1024
Typ
TCCEP
20.08.1998 11:28:15
2048
Typ
TCCER
10.11.1998 05:49:03
2048
Typ
TCCETT
14.02.1998 12:45:20
1024
Typ
TCCEPT
14.02.1998 12:45:07
1024
Typ
TCCERT
17.03.1999 16:24:38
2048
Typ
TCCS01
27.08.1999 18:28:00
1024
Prg
SAPLCCHO
17.09.2006 09:18:17
55296
Prg
SAPLCPTA
17.09.2006 09:09:03
122880
Prg
SAPLCQTA
17.09.2006 09:34:41
88064
Typ
TQ33
10.07.1997 00:12:25
2048
Typ
TQ30
15.04.1998 00:38:23
3072
Typ
TQ30T
14.02.1998 14:11:06
2048
Prg
SAPLCV141
17.09.2006 09:18:22
86016
Typ
DRAD
01.12.1999 15:17:34
3072
Prg
SAPLBSVT
16.08.2000 11:43:43
18432
Prg
SAPLSMSG
18.12.2004 13:27:29
108544
Typ
TJ05
30.11.1993 16:45:10
1024
Typ
TJ01
01.03.1999 13:50:12
4096
Typ
TJ07
30.11.1993 16:45:13
1024
Typ
TJ06
30.11.1993 16:45:11
1024
Typ
TJ03
16.08.2000 11:43:42
2048
Prg
SAPFGUICNTL_CFW
15.11.2001 05:19:19
17408
Prg
CL_GUI_DOCKING_CONTAINER======
15.11.2001 05:19:18
50176
Prg
SAPLQBCK
17.09.2006 09:27:37
106496
Typ
QINF
09.12.1999 19:04:48
5120
Typ
MTQSS
23.04.1998 14:51:52
4096
Prg
SAPLMAQM
17.09.2006 09:35:30
61440
Typ
T001W
18.11.1998 16:27:15
1024
Typ
T001K
01.02.2000 14:56:09
3072
Prg
SAPLMG21
17.09.2006 09:34:30
159744
Typ
MARA
17.09.2006 09:17:34
15360
Prg
SAPLMG22
17.09.2006 09:17:36
115712
Typ
MARC
04.01.2000 18:04:45
23552
Typ
RMQEA
13.08.1997 12:52:02
9216
Typ
TJ02
27.03.1996 18:28:28
1024
Typ
TJ02T
14.02.1998 13:40:18
2048
Typ
TJ04
30.11.1993 16:45:08
2048
Prg
SAPLKDIC
04.01.2000 19:06:48
17408
Prg
SAPLSDTO
04.01.2000 19:06:52
25600
Typ
DD07T
12.05.1997 16:45:51
2048
Prg
SAPLCSCE
04.01.2000 19:06:44
8192
Typ
T024E
10.12.1998 18:01:35
2048
Prg
SAPLSCVU
17.09.2006 08:50:02
59392
Typ
T006A
28.08.1997 09:04:18
2048
Typ
OLE_PA
04.04.1995 16:02:19
2048
Typ
ARFCRDATA
12.07.2002 21:39:11
3072
Typ
SWCBCONT
14.02.1998 10:14:45
2048
Typ
OLE_VERBS
04.04.1995 16:02:20
1024
Prg
SAPLSDSD
17.09.2006 08:53:36
437248
Typ
DDSHIFACE
20.08.1998 10:51:59
2048
Typ
DFIES
15.01.1999 16:49:52
6144
Typ
DDSHFPROP
20.08.1998 10:51:57
2048
Typ
DDSHSELOPT
20.08.1998 10:52:01
2048
Prg
SAPLSDNT
18.12.2004 12:05:44
188416
Prg
SAPLSDIF
18.12.2004 13:03:59
256000
Typ
T006
29.07.1998 19:25:31
3072
Prg
SAPLSCV0
17.09.2006 08:50:22
99328
Typ
TCA01
10.03.1999 18:31:19
5120
Typ
TCA02
14.02.1998 12:40:44
2048
Typ
TCA35
06.07.1998 20:51:04
2048
Typ
QMAT
27.08.1999 18:14:19
5120
Typ
TQ32
10.07.1997 00:12:23
2048
Prg
SAPLXQPL
17.09.2006 09:30:13
28672
Typ
TCA44
29.07.1998 19:44:06
2048
Prg
SAPLQPAP
17.09.2006 09:30:13
295936
Prg
SAPMSSY0
17.09.2006 08:53:44
69632
Prg
SAPLSNR3
17.09.2006 08:53:36
48128
Typ
TNRO
18.12.2004 13:02:43
4096
Prg
SAPLQEEV
17.09.2006 09:27:48
216064
Typ
QAPP
15.04.1998 00:12:33
7168
Typ
TQSS
20.01.2000 10:08:08
3072
Prg
SAPLQMCF
17.09.2006 09:34:35
46080
Prg
SAPLCEI0
03.12.2006 09:44:54
1121280
Prg
SAPLCUEV
13.07.2002 02:21:41
11264
Typ
IBINCOM
01.06.1999 11:56:27
2048
Typ
IBINCONF
01.06.1999 11:56:27
2048
Typ
IBSTCONF
01.06.1999 11:56:28
1024
Prg
IF_EX_CEI0_INVLD_POSSIBLE=====
12.02.2005 20:53:18
4096
Prg
CL_EX_CEI0_INVLD_POSSIBLE=====
12.02.2005 20:52:40
10240
Prg
CL_EXIT_MASTER================
01.02.2000 09:29:10
10240
Typ
V_EXT_IMP
14.10.1999 22:16:55
2048
Prg
SAPLCUCB
17.09.2006 09:34:59
199680
Typ
TCUIBSPECIAL
15.11.2001 05:31:05
1024
Prg
CL_CBASE======================
13.02.2005 07:14:09
95232
Typ
T371G
29.04.1998 10:42:48
1024
Prg
SAPLIBCO
13.02.2005 05:49:04
305152
Prg
SAPLIBXX
13.07.2002 02:21:41
12288
Prg
SAPLIBIBF
13.02.2005 06:58:29
177152
Prg
SAPLIBINF
13.02.2005 06:58:30
452608
Prg
CL_IBASE_STRUC================
13.07.2002 02:21:39
141312
Prg
CL_IBASE_STRUC_BUF============
13.02.2005 01:44:37
120832
Prg
CL_IBASE_STRUC_STAT===========
13.07.2002 02:21:39
9216
Prg
CL_IBASE_STRUC_BUF_IBSTREF====
13.02.2005 01:44:37
61440
Typ
IBINVAL
14.05.1998 22:39:25
2048
Prg
SAPLIBCU
13.07.2002 02:21:41
14336
Prg
SAPLIBCUT
13.07.2002 02:21:41
14336
Typ
T371B
14.05.1998 22:58:43
1024
Prg
CL_IBASE_SERVICE==============
13.07.2002 02:21:39
17408
Prg
CL_IBASE_T371D_BUF============
13.07.2002 02:21:39
15360
Typ
T371D
27.08.1999 18:19:44
2048
Prg
CL_IBASE_R3_MATERIAL==========
17.09.2006 09:33:39
99328
Typ
MAKT
28.08.1997 08:52:19
2048
Typ
ICON
03.01.1996 15:34:02
3072
Prg
IF_EX_CM_BADI_VERSION=========
12.07.2002 23:55:25
4096
Prg
CL_EX_CM_BADI_VERSION=========
12.07.2002 23:54:25
11264
Prg
CL_DEF_IM_CM_BADI_VERSION=====
12.07.2002 23:54:24
8192
Prg
SAPLASTAT_TRIG
18.12.2004 12:15:52
12288
Typ
ASTAT_TYP2
10.11.1998 05:35:18
1024
Typ
ASTAT_TYP1
30.11.1998 15:54:16
1024
Prg
IF_CM_BASELINE================
13.02.2005 06:50:14
40960
Prg
IF_IBASE_IBOF_TREE_OBJECT=====
13.02.2005 05:59:51
10240
Prg
IF_IBASE_INSTALL==============
13.07.2002 02:21:40
4096
Prg
IF_IBASE_MATERIAL=============
13.07.2002 02:21:40
4096
Prg
IF_IBASE_OBJECT===============
13.07.2002 02:21:40
5120
Prg
SAPLBOMA
01.02.2000 14:54:24
13312Hi Sanjay,
This dump generally occurs when there are inconsistencies between the name of the fields in the fieldcatalog and the names of the fields in the internal table. Please post ur code.(Assuming that this dump has occured in a Z* program)
Edited by: Rajesh on Dec 29, 2007 2:40 PM -
Short dump when trying to see the text elements of main window
Hi ,
The form is running properly in 4.7 c . But when the same is copied in ECC5.0 (unicode) , i 'm getting short dump while trying to see the TEXT ELEMENTS .
The message is like ' trying to create a field with zero length'.
Regards,
Jytoi.hi
I've never worked on ECC 5.0 version..however, I can only tell u that this could be the issue that code written in 4.7 may not be supported in 5.0..so try to get a good idea of ECC 5.0 before u start coding in this..
regards,
shamim -
In 4.5b system, program temporarily buffered; short dump when changing
Hi,
I have a program needs to be activated in 4.5B system.. when I clicked on Change button it is displaying options: -
a) get temporary version
b) get from database and keep temporary
c) get from database and delete temporary
I tried all the 3 options... and try to change the program and activate it.. It is going to short dump.
Could someone tell what needs to be done..to activate the program and delete the temporary version.
Regards,
HKHi,
Thats the real problem . Try this way which i used previously. dont know how effective in 4.5B
1) In the SE38 screen, give the program name. in the menu list,
Utilities ->Versions->Versions Management
2) Try compare the latest with last version. Note down if there are any changes. If not much, you can select the previous version and press Retrieve button ( or CTRL + F5 )
Then try enter the program again. It will be in previous version. then you can activate it
If still this is not working, the practical way is to copy the program, save in local system. Delete the program and create a new one
//Kothand -
Short Dump on BAPI_TRANSACTION_COMMIT with destination NONE
Hi All
I am using SAP-PM with Compatible Unit(CU) functionality in ECC6 environment.
After we release the CU design to Generate order we get SHORT DUMP.
Any help will be of great help.
I am pasting the details from the dump file here.
Please let me know.
Appretaite your help.
Thanks
Meghana
Runtime Errors CALL_FUNCTION_REMOTE_ERROR
Date and Time 27.08.2007 18:01:10
Short text
"The current application triggered a termination with a short dump."
What happened?
Error in the ABAP Application Program
The current ABAP program "/***/SAPLCUORDER_N" had to be terminated because it
has
come across a statement that unfortunately cannot be executed.
The error occurred during an RFC call to another system.
In the target system, a short dump has been written as well.
More detailed information on the error cause can be found there.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An error occurred when executing a REMOTE FUNCTION CALL.
It was logged under the name "MESSAGE_TYPE_X"
on the called page.
How to correct the error
Please refer to the notes described in the
short dump.
System environment
SAP-Release 700
Application server... "MB1ES1005"
Network address...... "10.191.97.206"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "2x Intel 801586"
Character length.... 16 Bits
Pointer length....... 32 Bits
Work process number.. 3
Shortdump setting.... "full"
Database server... "MB1ES1005"
Database type..... "ORACLE"
Database name..... "EC6"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Jul 25 2007 00:57:05"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "OCI_10201_SHARE (10.2.0.1.0) "
Patch level. 121
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 8176
EM...... 14633136
Heap.... 0
Page.... 131072
MM Used. 5005432
MM Free. 1263944
User and Transaction
Client.............. 200
User................ 10086330
Language key........ "E"
Transaction......... "/***/DESIGN "
Transactions ID..... "409954DC5D77F1C58E2D0013725D3B3B"
Program............. "/***/SAPLCUORDER_N"
Screen.............. "/***/SAPLCUORDER_N 2000"
Screen line......... 34
Information on where terminated
Termination occurred in the ABAP program "/***/SAPLCUORDER_N" - in
"SAVE_DESIGN".
The main program was "/***/SAPLCUORDER_N ".
In the source code you have the termination point in line 594
of the (Include) program "/***/LCUORDER_NF07".
Source Code Extract
Line
SourceCde
564
ENDIF .
565
ENDLOOP .
566
IF l_ret-type = 'E' OR
567
l_ret-type = 'A' .
568
CLEAR: save_okcode .
569
570
Show Messages
571
CALL FUNCTION '/***/N_LOG_ADD_MSG'
572
EXPORTING
573
i_log_type = 'G'
574
TABLES
575
t_ret = t_ret.
576
PERFORM log_order_create_show .
577
Show first Message
578
MESSAGE ID l_ret-id TYPE l_ret-type NUMBER l_ret-number
579
WITH
580
l_ret-message_v1 l_ret-message_v2
581
l_ret-message_v3 l_ret-message_v4.
582
CALL FUNCTION '/***/N_DESIGN_INIT' .
583
ELSE .
584
IF g_design_mode = con_mode_crea.
585
Need to update DMS documents with real design number
586
PERFORM document_prepare_002 USING con_desnum_tmp_1
587
lv_desnum.
588
ENDIF.
589
Commit design BAPI's
590
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' .
591
592
IF save_okcode = con_order.
593
Commit order BAPI's
>>>>>
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
595
DESTINATION 'NONE'.
596
597
call of fct. RFC_CONNECTION_CLOSE is important to get a new
598
initial roll area with initial internal tables next time
599
CALL FUNCTION 'RFC_CONNECTION_CLOSE'
600
EXPORTING
601
destination = 'NONE'
602
EXCEPTIONS
603
destination_not_open = 1
604
OTHERS = 2.
605
ENDIF.
606
607
IF lv_desnum IS INITIAL .
608
lv_desnum = /***/cudesign-desnum .
609
ENDIF .
610
SET PARAMETER ID '/***/DESNUM' FIELD lv_desnum .
611
Changes saved
612
MESSAGE ID '/***/MSG' TYPE 'S' NUMBER '529' WITH lv_desnum .
613
ENDIF .
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
0
SY-TABIX
1
SY-DBCNT
1
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
2000
SY-UCOMM
CU01
SY-TITLE
Change Design: 50000109
SY-MSGTY
X
SY-MSGID
00
SY-MSGNO
341
SY-MSGV1
MESSAGE_TYPE_X
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20070827
SY-UZEIT
180110
SY-XPROG
SAPMSSY1
SY-XFORM
XAB_READ
Active Calls/Events
No. Ty. Program Include Line
Name
4 FORM /***/SAPLCUORDER_N /***/LCUORDER_NF07 594
SAVE_DESIGN
3 FORM /***/SAPLCUORDER_N /***/LCUORDER_NF07 2616
CHECK_AND_SAVE_F07
2 FORM /***/SAPLCUORDER_N /***/LCUORDER_NF04 311
USER_COMMAND_D2000
1 MODULE (PAI) /***/SAPLCUORDER_N /***/LCUORDER_NI05 28
USER_COMMAND_2000
Chosen variables
Name
Val.
No. 4 Ty. FORM
Name SAVE_DESIGN
%_DUMMY$$
2222
0000
0000
0000
CL_GUI_RESOURCES=>COL_TEXTAREA
31
1000
F000
G_DESIGN_MODE
R
5
2
0
0
CON_MODE_CREA
I
4
9
0
0
GT_NODE_CUI
Table[initial]
SY-REPID
/***/SAPLCUORDER_N
2454254544545445542222222222222222222222
F35DF310C35F2452FE0000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
CON_DESNUM_TMP_1
TM00000001CY
543333333345
4D0000000139
000000000000
000000000000
LV_DESNUM
222222222222
000000000000
000000000000
000000000000
SAVE_OKCODE
CU01
4533222222222222222222222222222222222222222222222222222222222222222222
3501000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
CON_ORDER
CU01
4533222222222222222222222222222222222222222222222222222222222222222222
3501000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
SY-XPROG
SAPMSSY1
5454555322222222222222222222222222222222
310D339100000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
CON_DELETE
LVMS
4545222222222222222222222222222222222222222222222222222222222222222222
C6D3000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
No. 3 Ty. FORM
Name CHECK_AND_SAVE_F07
CL_GUI_ALV_GRID=>MC_MB_VIEW
&MB_VIEW
2445544522222222222222222222222222222222222222222222222222222222222222
6D2F695700000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
GT_OP
Table IT_303[2x1320]
PROGRAM=/***/SAPLCUORDER_NDATA=GT_OP
Table reference: 118
TABH+ 0(20) = 7039FC3C5824DB3C00000000760000002F010000
TABH+ 20(20) = 0200000028050000FFFFFFFF0400000030140000
TABH+ 40( 8) = 08000000C1308001
store = 0x7039FC3C
ext1 = 0x5824DB3C
shmId = 0 (0x00000000)
id = 118 (0x76000000)
label = 303 (0x2F010000)
fill = 2 (0x02000000)
leng = 1320 (0x28050000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000093
occu = 8 (0x08000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x2010FC3C
pgHook = 0x00000000
idxPtr = 0x00000000
shmTabhSet = 0x00000000
id = 234 (0xEA000000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 8 (0x08000000)
lineAlloc = 8 (0x08000000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = 0x60B7153D
collHook = 0x00000000
ext2 = 0x1024DB3C
>>>>> 2nd level extension part <<<<<
tabhBack = 0xE00FFC3C
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
G_BADI_PROGRAM
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
LOG_ERROR
2
0
0
0
CON_BUTT_DELETED
@11QDelete@
43355466676422222222222222222222222222222222
011C145C545000000000000000000000000000000000
00000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000
G_CU_EXIT_CU_EXPLODE
F0000000
F0000000
/***/CUDESIGN-OBJNR
CY00000000000000008835
4533333333333333333333
3900000000000000008835
0000000000000000000000
0000000000000000000000
CL_GUI_RESOURCES=>COL_TEXTAREA
31
1000
F000
G_SEC_COUNT
0
0000
0000
LV_UPD
X
5
8
0
0
%_SPACE
2
0
0
0
GS_ROW_NO
0.0.0.1.
0000
1000
0000
0000
SCREEN
/***/CUDESIGN-GLTRP
2454245445444244555222222222222222222222222222222222222222222222222222222222222222222222222222
F35DF3545397ED7C420000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SY-MSGID
00
33222222222222222222
00000000000000000000
00000000000000000000
00000000000000000000
SWO_%CONTAINER
000000000
2222222222222222222222222222222233333333322222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SPACE
2
0
0
0
SY-MSGNO
341
333
341
000
000
/***/CVCUI-CUTYP
2
0
0
0
SY-MSGV1
MESSAGE_TYPE_X
44554445555455222222222222222222222222222222222222
D533175F4905F8000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV2
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV3
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV4
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
No. 2 Ty. FORM
Name USER_COMMAND_D2000
/***/CVCUI
0.0.0.0.0.0.0.1. 000000
2220000000022222222222222222222222222222222222222222222222222222222222222222222222223333332222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SYST-REPID
/***/SAPLCUORDER_N
2454254544545445542222222222222222222222
F35DF310C35F2452FE0000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
CON_MODE_COPY
C
4
3
0
0
LT_BAPI_RETURN
Table IT_1778[2x1088]
PROGRAM=/***/SAPLCUORDER_NFORM=USER_COMMAND_D2000DATA=LT_BAPI_RETURN
Table reference: 310
TABH+ 0(20) = 8837083D407E1C3D0000000036010000F2060000
TABH+ 20(20) = 0200000040040000FFFFFFFF04000000F0170000
TABH+ 40( 8) = 08000000C1308101
store = 0x8837083D
ext1 = 0x407E1C3D
shmId = 0 (0x00000000)
id = 310 (0x36010000)
label = 1778 (0xF2060000)
fill = 2 (0x02000000)
leng = 1088 (0x40040000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000113
occu = 8 (0x08000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
groupCntl = 0
rfc = 1
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x50C6073D
pgHook = 0x00000000
idxPtr = 0x00000000
shmTabhSet = 0x00000000
id = 1534 (0xFE050000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 8 (0x08000000)
lineAlloc = 8 (0x08000000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
collHook = 0x00000000
ext2 = 0x6067033D
>>>>> 2nd level extension part <<<<<
tabhBack = 0xE82F063D
delta_head = 0000000000000000CF000000000000000400000020180000000000004D00430055004F000000000
pb_func = 0x00000000
pb_handle = 0x00000000
CON_MODE_ORDE
O
4
F
0
0
TGSBT
22222222222222222222222222222222222222
00000000000000000000000000000000000000
00000000000000000000000000000000000000
00000000000000000000000000000000000000
CL_GUI_RESOURCES=>COL_TEXTAREA
31
1000
F000
LS_NUMBERS-AUFNR_NEW
000001000677
333333333333
000001000677
000000000000
000000000000
T024I
200UT10100PG for Term & Comp
33355333335426672567622246672222222222222222
20054101000706F20452D0603FD00000000000000000
00000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000
LS_T399X
200UT10UM01 X INST 30UT01UT01
3335533543322222222222222222252222445522335533553322222222222222222222222222222222222222222222
20054105D01000000000000000000800009E3400305401540100000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
CON_VBKZ_U
U
5
5
0
0
/***/CU_ORDER_IO-DISP_FACTOR
2097152
0
0
LS_DESIGN
200########000050000109DDCY00000000000000008835PROFILE1 0001UT10UM0100220100MWH001
333D5FC807333333333333344453333333333333333333355444443223333553354333333333345433322222222222
200CDB1E02B00005000010944390000000000000000883502F69C5100000154105D0100220100D7800100000000000
000599F215300000000000000000000000000000000000000000000000000000000000000000000000000000000000
0004C91D3DB00000000000000000000000000000000000000000000000000000000000000000000000000000000000
/***/CUDESIGN
200########000050000109DDCY00000000000000008835PROFILE1 0001UT10UM0100220100MWH001
333D5FC807333333333333344453333333333333333333355444443223333553354333333333345433322222222222
200CDB1E02B00005000010944390000000000000000883502F69C5100000154105D0100220100D7800100000000000
000599F215300000000000000000000000000000000000000000000000000000000000000000000000000000000000
0004C91D3DB00000000000000000000000000000000000000000000000000000000000000000000000000000000000
G_DROP_COUNT
0
0000
0000
LS_DESIGN-DESNUM
000050000109
333333333333
000050000109
000000000000
000000000000
No. 1 Ty. MODULE (PAI)
Name USER_COMMAND_2000
GT_SELTAB_INIT
Table[initial]
Internal notes
The termination was triggered in function "RfcExtendedReceive"
of the SAP kernel, in line 422 of the module
"//bas/700_REL/src/krn/rfc/abrfcrcv.c#4".
The internal operation just processed is "FUNC".
Internal mode was started at 20070827180011.
Status of connection:
RFC state: " "
RFC error text: "RFC_ERROR_SYSTEM_FAILURE"
CPI-C error text: "The current application triggered a termination with a short
dump."
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Callstack without Exception:
App : disp+work.EXE (pid=26488)
When : 8/27/2007 18:1:10.942
Threads : 2
Computer Name : MB1ES1005
User Name : ec6adm
Number of Processors: 2
Processor Type: x86 Family 15 Model 4 Stepping 10
Windows Version : 5.2 Current Build: 3790
State Dump for Thread Id 5e10
eax=000f93c0 ebx=0000042c ecx=00003118 edx=00000000 esi=0000042c edi=00000000
eip=7c82ed54 esp=056d71f0 ebp=056d7260 iopl=0 nv up ei ng nz ac po cy
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00200297
function : KiFastSystemCallRet
7c82ed54 c3 ret
7c82ed55 8da42400000000 lea esp,[esp] ss:056d71f0=7c822124
7c82ed5c 8d642400 lea esp,[esp] ss:62bd5803=00000000
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
056d7260 77e6ba42 0000042c 0001d4c0 00000000 056d7298 ntdll!KiFastSystemCallRet
056d7274 0109504d 0000042c 0001d4c0 00000001 7c38b5c8 kernel32!WaitForSingleObject
056d7298 00582118 00582151 7c38b5c8 7c38b5c8 7c38b5c8 disp+work!NTDebugProcess (ntstcdbg.c (501))
056d729c 00582151 7c38b5c8 7c38b5c8 7c38b5c8 01e9b1b8 disp+work!NTStack (dptstack.c (1367))
056d72b8 00582185 7c38b5c8 00000000 008b7ec8 7c38b5c8 disp+work!CTrcStack2 (dptstack.c (352))
056d72c4 008b7ec8 7c38b5c8 00000000 005f0059 00330030 disp+work!CTrcStack (dptstack.c (182))
056d72e8 008bb39f 00711076 056d8018 056d7be8 00200020 disp+work!rabax_CStackSave [abrabax.c (7063)
056d7b90 009eca8b 020b9e4c 020b9e14 000001a6 5d88acf0 disp+work!ab_rabax (abrabax.c (1243))
056d7bcc 009ed19e 00000003 00711076 00000020 00000000 disp+work!rcv_message (abrfcrcv.c (422))
056d8068 009ed29d 00000003 00000000 00710c47 056d80c0 disp+work!RfcExtendedReceive [abrfcrcv.c (14
056d808c 00714873 00000003 00710c47 056d80c0 00711076 disp+work!ab_rfcreceive (abrfcrcv.c (59))
056d80e4 0071886b 2694a7c8 2694a7cc 2694a7cc 2694a7cc disp+work!jfunc_get (abfunc.c (5103))
056d89f4 007191d0 00000003 000000b4 00000000 05e8b7c0 disp+work!jfunc_nonstandard [abfunc.c (1655)
056dcfb0 006e3e2d 00000003 3ced8f90 00000000 056dd018 disp+work!ab_jfunc (abfunc.c (554))
056dd018 0081cb5e 00000000 3ced8f90 056dd164 3cedb514 disp+work!ab_extri (abextri.c (552))
056dd02c 00897dbd 00000000 3cedae46 005bf4cd 3ceda13c disp+work!ab_xevent (abrunt1.c (281))
056dd038 005bf4cd 3ceda13c 000000ea 3cedae46 00000000 disp+work!ab_dstep (abdynpro.c (492))
056dd164 005c25be 3ced8f90 3ced8f90 056dfc78 00000000 disp+work!dynpmcal (dymainstp.c (2398))
056dd178 005c1def 00000001 3ced8f90 00000003 056dfc78 disp+work!dynppai0 (dymainstp.c (1004))
056dd194 00595e69 3ced8f90 00000001 00000001 00000001 disp+work!dynprctl (dymainstp.c (360))
056dfcec 00490e06 00000004 0049d15f 00000004 01dadd00 disp+work!dynpen00 (dymain.c (1628))
056dfcf4 0049d15f 00000004 01dadd00 00000003 00000002 disp+work!Thdynpen00 (thxxhead.c (4773))
056dfee0 0049d6d6 00000001 00000000 00000000 00430000 disp+work!TskhLoop (thxxhead.c (4455))
056dff00 00421c36 00000000 00000000 7ffde000 056dff60 disp+work!ThStart (thxxhead.c (1173))
056dff14 00401080 00000003 05876980 00000001 00000000 disp+work!DpMain (dpxxdisp.c (1121))
056dff60 01242970 00000003 05876980 05877a10 01cce000 disp+work!nlsui_main (thxxanf.c (82))
056dffc0 77e523e5 00000000 00000000 7ffde000 8967f020 disp+work!wmainCRTStartup (crtexe.c (395))
056dfff0 00000000 0124282d 00000000 00905a4d 00000003 kernel32!IsProcessorFeaturePresent
State Dump for Thread Id 61fc
eax=00000000 ebx=00000103 ecx=0587a700 edx=02714360 esi=00000000 edi=00000000
eip=7c82ed54 esp=0799fec0 ebp=0799ff04 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246
function : KiFastSystemCallRet
7c82ed54 c3 ret
7c82ed55 8da42400000000 lea esp,[esp] ss:0799fec0=7c821514
7c82ed5c 8d642400 lea esp,[esp] ss:64e9e4d3=00000000
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
0799ff04 0119030a 000006e0 00000000 00000000 0587a798 ntdll!KiFastSystemCallRet
0799ff84 7c349565 00000000 00000000 00000000 0587a700 disp+work!SigIMsgFunc (signt.c (610))
0799ffb8 77e6608b 0587a700 00000000 00000000 0587a700 MSVCR71!endthreadex
0799ffec 00000000 7c3494f6 0587a700 00000000 00000000 kernel32!GetModuleFileNameA
List of ABAP programs affected
Index
Typ
Program
Group
Date
Time
Size
Lang.
0
Prg
/***/SAPLCUORDER_N
0
10.08.2007
10:12:44
541696
E
1
Typ
/***/CUDESIGN
0
10.08.2007
10:05:19
7168
2
Typ
/***/CU_ORDER_IO
0
10.08.2007
09:53:38
4096
3
Typ
/***/DESTYPE
0
10.08.2007
10:05:21
2048
4
Typ
/***/PRF_ORD
0
10.08.2007
10:05:21
4096
5
Prg
SAPMSSYD
0
04.04.2007
10:28:36
21504
E
6
Prg
SAPFSYSCALLS
0
09.09.2004
14:18:32
8192
E
7
Typ
/***/G_CUST
0
10.08.2007
09:53:39
3072
8
Prg
/***/SAPLTABLES
8
10.08.2007
10:13:00
19456
E
9
Typ
/***/G_CHAR
0
10.08.2007
10:05:21
3072
10
Prg
SAPLCTCE
10
09.09.2004
14:18:34
9216
E
11
Typ
CABN
0
18.09.2001
10:02:26
12288
12
Prg
SAPLICON
12
04.04.2007
10:10:28
27648
E
13
Prg
%_CICON
12
07.02.2006
10:40:00
104448
E
14
Typ
ICONT
0
04.04.2007
10:10:08
2048
15
Typ
NRIV
0
02.04.1998
08:14:54
3072
16
Prg
SAPLBSVA
16
04.04.2007
14:47:00
296960
E
17
Typ
/***/CU_ORDER_S_OP_N
0
10.08.2007
09:53:39
14336
18
Prg
CL_GUI_CONTROL================CP
18
28.02.2005
21:03:09
112640
E
19
Prg
%_CCNTL
18
18.02.2005
14:15:08
15360
E
20
Typ
OBJ_RECORD
0
14.02.1998
08:30:43
2048
21
Prg
CL_GUI_OBJECT=================CP
21
05.07.2005
13:10:15
375808
E
22
Prg
CL_GUI_CFW====================CP
22
28.02.2005
21:03:09
172032
E
23
Prg
CL_GUI_PROPS_CONSUMER=========CP
23
18.02.2005
14:15:08
30720
E
24
Prg
SAPLTHFB
24
04.04.2007
13:24:38
390144
E
25
Typ
EUDB
0
06.11.2003
20:28:08
8192
26
Prg
SAPLSFES
26
08.08.2007
16:46:17
259072
E
27
Prg
SAPLSPLUGIN
27
09.09.2004
14:18:36
8192
E
28
Prg
SAPLSTTMYes even i find it strange. But there is no syntax error and the fact is that it was working 2 days back. Suddenly it has started giving us this dump.
The code is as follows.
Commit design BAPI's
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' .
IF save_okcode = con_order.
Commit order BAPI's
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
DESTINATION 'NONE'.
Here con_order is CU01.
Please let me know if anybody has faced this problem earlier.
Thanks in Advance
Meghana -
RE: Short dump after activation of BADI
Hi all,
We are getting short dumps in all the transactions after activating the BADI 'BADI_LAYER'
We are not able to execute any of the transactions.
The details of runtimeerror
Runtime Errors RAISE_EXCEPTION
Date and Time 30.07.2007 09:58:06
Short text
Exception condition "SINGLE_EXIT_MULTIPLY_ACTIVE" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "CL_EXITHANDLER================CP" raised the
exception
condition "SINGLE_EXIT_MULTIPLY_ACTIVE".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"RAISE_EXCEPTION" " "
"CL_EXITHANDLER================CP" or "CL_EXITHANDLER================CM001"
"GET_INSTANCE"
or
"CL_EXITHANDLER================CP" "SINGLE_EXIT_MULTIPLY_ACTIVE"
or
"SAPMF05A " "SINGLE_EXIT_MULTIPLY_ACTIVE"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "sapdevp"
Network address...... "192.168.0.205"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x Intel 80686"
Character length.... 16 Bits
Pointer length....... 32 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "SAPDEVP"
Database type..... "ORACLE"
Database name..... "TDV"
Database user ID.. "SAPSR4"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Apr 2 2006 23:08:16"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "OCI_10103_SHARE "
Patch level. 52
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory consumption
Roll.... 8176
EM...... 6271344
Heap.... 0
Page.... 57344
MM Used. 1728072
MM Free. 360856
User and Transaction
Client.............. 400
User................ "FIUSER01"
Language key........ "E"
Transaction......... "FB50 "
Program............. "CL_EXITHANDLER================CP"
Screen.............. "SAPMF05A 1010"
Screen line......... 7
Information on where terminated
Termination occurred in the ABAP program "CL_EXITHANDLER================CP" -
in "GET_INSTANCE".
The main program was "SAPMF05A ".
In the source code you have the termination point in line 145
of the (Include) program "CL_EXITHANDLER================CM001".
Source Code Extract
Line
SourceCde
115
SELECT SINGLE is_impl FROM badiisimpled INTO is_impl
116
WHERE badi_name = mig_badi_name.
117
IF sy-subrc NE 0.
118
not yet filled
119
is_impl = cl_enh_badi_tool_utilities=>update_badiisimpled( mig_badi_name ).
120
ENDIF.
121
122
IF is_impl = 'X'.
123
ok at least one implementation found
124
act_imp_existing = 'X'.
125
ENDIF.
126
127
ENDIF.
128
ENDIF.
129
ELSE.
130
131
check how many implementations exist for an exit
132
CALL METHOD cl_badi_flt_data_trans_and_db=>act_imps_per_flt_val
133
EXPORTING
134
runtime_call = seex_true
135
exit_name = exit_name
136
EXCEPTIONS
137
singular_exit_multiply_active = 1
138
no_active_implementation = 2
139
only_default_implementation = 3
140
OTHERS = 4.
141
CASE sy-subrc.
142
WHEN 0.
143
act_imp_existing = seex_true.
144
WHEN 1.
>>>>>
RAISE single_exit_multiply_active.
146
WHEN 2.
147
act_imp_existing = seex_false.
148
WHEN 3.
149
act_imp_existing = seex_false.
150
def_impl = seex_true.
151
WHEN 4.
152
RAISE data_incons_in_exit_managem.
153
ENDCASE.
154
155
new parameter considered for performance purposes
156
IF act_imp_existing = seex_true OR
157
def_impl = seex_true OR
158
null_instance_accepted = seex_false.
159
160
ok, then do your job
161
CREATE OBJECT exit TYPE (abs_type_classname).
162
CATCH SYSTEM-EXCEPTIONS move_cast_error = 1.
163
instance ?= exit.
164
ENDCATCH.
Contents of system fields
Name
Val.
SY-SUBRC
1
SY-INDEX
0
SY-TABIX
0
SY-DBCNT
2
SY-FDPOS
1
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
FSKB
SY-UCOMM
SY-TITLE
Enter G/L Account Document: Company Code TJ01
SY-MSGTY
S
SY-MSGID
B!
SY-MSGNO
015
SY-MSGV1
00001140
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20070730
SY-UZEIT
095806
SY-XPROG
SY-XFORM
Active Calls/Events
No. Ty. Program Include Line
Name
5 METHOD CL_EXITHANDLER================CP CL_EXITHANDLER================CM001 145
CL_EXITHANDLER=>GET_INSTANCE
4 METHOD CL_EXIT_MASTER================CP CL_EXIT_MASTER================CM004 2
CL_EXIT_MASTER=>CLASS_CONSTRUCTOR
3 METHOD CL_EX_FI_HEADER_SUB_1300======CP CL_EX_FI_HEADER_SUB_1300======CM003 53
CL_EX_FI_HEADER_SUB_1300=>IF_EX_FI_HEADER_SUB_1300~PUT_DATA_TO_SCREEN_PBO
2 FORM SAPMF05A MF05AF00_D0100_PRE_APPL_SUB_2 50
D0100_PRE_APPL_SUB_PBO
1 MODULE (PBO) SAPMF05A MF05AO00_D0100_PRE_APPL_SUB 10
D0100_PRE_APPL_SUB
Chosen variables
Name
Val.
No. 5 Ty. METHOD
Name CL_EXITHANDLER=>GET_INSTANCE
EXIT_NAME
BADI_LAYER
44445445452222222222
2149FC19520000000000
00000000000000000000
00000000000000000000
NULL_INSTANCE_ACCEPTED
2
0
0
0
ACT_IMP_EXISTING
2
0
0
0
INSTANCE
F0000000
F0000000
%_SPACE
2
0
0
0
RSJOBINFO
00000000000000 ##
2222222222222222222222222222222233333333333333222222222222222222222222222222222200
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
%_DUMMY$$
2222
0000
0000
0000
SEEX_TRUE
X
5
8
0
0
SYST-REPID
CL_EXITHANDLER================CP
4454545444444533333333333333334522222222
3CF589481E4C52DDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
<%_TABLE_BADIISIMPLED>
SY-REPID
CL_EXITHANDLER================CP
4454545444444533333333333333334522222222
3CF589481E4C52DDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SY-SUBRC
1
0000
1000
SY-XPROG
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
No. 4 Ty. METHOD
Name CL_EXIT_MASTER=>CLASS_CONSTRUCTOR
%_SPACE
2
0
0
0
SYST-REPID
CL_EXIT_MASTER================CP
4454545544554533333333333333334522222222
3CF5894FD13452DDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SY-REPID
CL_EXIT_MASTER================CP
4454545544554533333333333333334522222222
3CF5894FD13452DDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
CL_EXIT_MASTER=>LAYER_EXIT
F0000000
F0000000
%_DUMMY$$
2222
0000
0000
0000
No. 3 Ty. METHOD
Name CL_EX_FI_HEADER_SUB_1300=>IF_EX_FI_HEADER_SUB_1300~PUT_DATA_TO_SCREEN_PBO
IM_BKPF
TJ01 2007SA00000000200707300400000000000000000000000000000000000000
2225433222222222233335433333333333333333333333333333333333333333333333333333333222222222222222
0004A01000000000020073100000000200707300400000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
IM_X_NO_INPUT
2
0
0
0
FLT_VAL
IN
44
9E
00
00
<EXIT_OBJ>-IMP_CLASS
<FLT_CACHE_LINE>-OBJ
|
| F0000000 |
| F0000000 |
| %_DUMMY$$ |
| |
| 2222 |
| 0000 |
| 0000 |
| 0000 |
| ME->INSTANCE_BADI_TABLE |
| Table[initial] |
| <EXIT_OBJ> |
| ??? |
| ?????? |
| ?????? |
| <%_L001> |
| ??? |
| ?????? |
| ?????? |
| RSJOBINFO |
| 00000000000000 ## |
| 2222222222222222222222222222222233333333333333222222222222222222222222222222222200 |
| 0000000000000000000000000000000000000000000000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000000000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000000000000000000000000000000000000000000000 |
| SY-REPID |
| CL_EX_FI_HEADER_SUB_1300======CP |
| 4454554454444455554533333333334522222222 |
| 3CF58F69F851452F352F1300DDDDDD3000000000 |
| 0000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000 |
| <%_L001>-METHOD_NAME |
| ??? |
| ?????? |
| ?????? |
| EXIT_OBJ_TAB |
| Table[initial] |
| SY-SUBRC |
| 1 |
| 0000 |
| 1000 |
| ME |
|
F0000000
C0003000
SXRT_TRUE
X
5
8
0
0
No. 2 Ty. FORM
Name D0100_PRE_APPL_SUB_PBO
*BSEG-STBUK
2222
0000
0000
0000
%_DUMMY$$
2222
0000
0000
0000
SY-REPID
SAPMF05A
5454433422222222222222222222222222222222
310D605100000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SYST-REPID
SAPMF05A
5454433422222222222222222222222222222222
310D605100000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
KDBTAB-DMBTR
0.0.0.0.0.0.1.
0000000
000000C
%_SPACE
2
0
0
0
KDPTAB-BELNR
2222222222
0000000000
0000000000
0000000000
KDPTAB-GJAHR
0000
3333
0000
0000
0000
KDPTAB-BUZEI
000
333
000
000
000
KDBTAB-XRUND
2
0
0
0
SPACE
2
0
0
0
F05ACTRL
2
0
0
0
SYST
######################################ð#######################################~######### C####
00000000000000000000000000000000000000F0000000000000000000000000000000000000107000000050240000
000000200000000000002010100010000000000000000010400000000000000000000000000080E000200080030100
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000040000000
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000D000000C
BSED
0000000# ############## 0000000000000000
2222222222222222233333330200000000000000223333333333333333222222222222222222222222222222222222
00000000000000000000000000000C000000C000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000C0000000C000000C000000000000000000000000000000000000000000000000000000
SY-SUBRC
1
0000
1000
G_APPL_SUB_ACTIVE
X
5
8
0
0
CHAR_X
X
5
8
0
0
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
BKPF-BUKRS
TJ01
5433
4A01
0000
0000
BKPF
TJ01 2007SA00000000200707300400000000000000000000000000000000000000
2225433222222222233335433333333333333333333333333333333333333333333333333333333222222222222222
0004A01000000000020073100000000200707300400000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
G_APPL_SUB_DISABLE
2
0
0
0
T005-INTCA
IN
44
9E
00
00
No. 1 Ty. MODULE (PBO)
Name D0100_PRE_APPL_SUB
C_FIELD_DIALOG_ALL
BUTTON_DIALOG_ALL
4555445444444544422222222222222222222222222222222222222222222222222222222222222222222222222222
2544FEF491CF7F1CC00000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Internal notes
The termination was triggered in function "ab_jfune"
of the SAP kernel, in line 2561 of the module
"//bas/700_REL/src/krn/runt/abfunc.c#10".
The internal operation just processed is "FUNE".
Internal mode was started at 20070730095806.
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Callstack without Exception:
App : disp+work.EXE (pid=4436)
When : 7/30/2007 9:58:6.359
Threads : 2
Computer Name : SAPDEVP
User Name : SAPServiceTDV
Number of Processors: 4
Processor Type: x86 Family 6 Model 15 Stepping 6
Windows Version : 5.2 Current Build: 3790
State Dump for Thread Id 250c
eax=34d52300 ebx=000003f8 ecx=0001ccc0 edx=34d039e0 esi=000003f8 edi=00000000
eip=7c82ed54 esp=053fceb4 ebp=053fcf24 iopl=0 nv up ei ng nz ac po cy
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00200297
function : KiFastSystemCallRet
7c82ed54 c3 ret
7c82ed55 8da42400000000 lea esp,[esp] ss:053fceb4=7c822124
7c82ed5c 8d642400 lea esp,[esp] ss:6627b4c7=00002100
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
053fcf24 77e6ba42 000003f8 0001d4c0 00000000 053fcf5c ntdll!KiFastSystemCallRet
053fcf38 0100b3aa 000003f8 0001d4c0 00000001 7c38b5c8 kernel32!WaitForSingleObject
053fcf5c 0055b4ac 0055b4e5 7c38b5c8 7c38b5c8 7c38b5c8 disp+work!NTDebugProcess
053fcf60 0055b4e5 7c38b5c8 7c38b5c8 7c38b5c8 01d35ab0 disp+work!NTStack
053fcf7c 0055b519 7c38b5c8 00000000 008536a8 7c38b5c8 disp+work!CTrcStack2
053fcf88 008536a8 7c38b5c8 00000000 005f0059 00300030 disp+work!CTrcStack
053fcfac 008569fa 6d1d037c 0000001b 00000000 01cfc168 disp+work!rabax_CStackSave [abrabax.c (6871)
053fd084 006aaaf4 0134837c 0134835c 00000a01 235f1640 disp+work!ab_rabax
053fd0c0 0067bb56 00000003 34cf5708 00000000 053fd128 disp+work!ab_jfune
053fd128 007af183 00000000 34cf5708 053fd274 34cf8c26 disp+work!ab_extri
053fd13c 00837a37 00000000 34cf7dd6 00596fa0 34cf68b4 disp+work!ab_xevent
053fd148 00596fa0 34cf68b4 000003db 34cf7dd6 00000000 disp+work!ab_dstep
053fd274 00597fa1 34cf5708 34cf5708 053ffd04 00597b13 disp+work!dynpmcal
053fd284 00597b13 34cf5708 34cf5708 00000003 053ffd04 disp+work!dynppbo0
053fd2a0 0056dcf1 34cf5708 0006e768 00000000 0000000c disp+work!dynprctl
053ffd04 00471848 00000013 07de0048 00000001 00494960 disp+work!dynpen00
053ffd14 00494960 0000000c 00000000 00000003 00000002 disp+work!Thdynpen00
053ffee0 00494ee2 00000001 00000000 00000000 00430000 disp+work!TskhLoop
053fff00 00421150 00000000 00000000 7ffd8000 053fff60 disp+work!ThStart
053fff14 00401080 00000003 003f6850 00000001 00000000 disp+work!DpMain
053fff60 011a94a0 00000003 003f6850 003f78f8 01bd5000 disp+work!nlsui_main
053fffc0 77e523e5 00000000 00000000 7ffd8000 88602680 disp+work!wmainCRTStartup
053ffff0 00000000 011a935d 00000000 00905a4d 00000003 kernel32!IsProcessorFeaturePresent
State Dump for Thread Id 27bc
eax=00000001 ebx=00000103 ecx=fffffffe edx=003f01f8 esi=00000000 edi=00000000
eip=7c82ed54 esp=075dfec0 ebp=075dff04 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246
function : KiFastSystemCallRet
7c82ed54 c3 ret
7c82ed55 8da42400000000 lea esp,[esp] ss:075dfec0=7c821514
7c82ed5c 8d642400 lea esp,[esp] ss:6845e4d3=50004500
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
075dff04 010f7ffc 000006c0 00000000 00000000 003f77d0 ntdll!KiFastSystemCallRet
075dff84 7c349565 00000000 00000000 00000000 0587ff08 disp+work!SigIMsgFunc
075dffb8 77e6608b 0587ff08 00000000 00000000 0587ff08 MSVCR71!endthreadex
075dffec 00000000 7c3494f6 0587ff08 00000000 00000000 kernel32!GetModuleFileNameA
List of ABAP programs affected
Index
Typ
Program
Group
Date
Time
Size
Lang.
0
Prg
SAPMF05A
0
22.05.2007
11:37:49
1563648
E
1
Prg
SAPMSSYD
0
10.01.2007
12:33:28
21504
E
2
Prg
SAPFSYSCALLS
0
09.09.2004
14:18:32
8192
E
3
Typ
TFDIR
0
13.02.2005
17:31:57
3072
4
Prg
SAPLAPAR_EBPP_SERVICES
4
03.01.2007
11:23:55
114688
E
5
Typ
T042ZEBPP
0
08.01.2002
14:42:24
2048
6
Typ
T020
0
24.02.1999
03:17:19
3072
7
Typ
RFOPT2
0
11.12.2003
15:00:17
5120
8
Prg
SAPFF001
0
22.05.2007
11:37:49
195584
E
9
Typ
SWOTOBJID
0
04.05.1995
15:20:52
2048
10
Prg
SAPLSWOR
10
10.01.2007
12:33:34
292864
E
11
Typ
TFBUF
0
30.11.1998
22:08:34
3072
12
Typ
ACC_KONTEXT
0
08.01.2003
17:30:26
3072
13
Typ
BKPF
0
13.03.2006
11:01:29
18432
14
Prg
SAPLFACSCORE
14
01.12.2006
22:00:12
13312
E
15
Typ
T001
0
25.08.2005
22:03:13
13312
16
Prg
SAPLACHD
16
03.01.2007
11:23:55
51200
E
17
Prg
SAPFSPOR
0
09.09.2004
14:18:32
15360
E
18
Prg
SAPLSCNT
18
18.02.2005
14:16:06
30720
E
19
Typ
DYCBOX
0
20.08.1998
11:16:53
3072
20
Prg
SAPLSVSM
20
18.02.2005
14:16:06
27648
E
21
Prg
SAPLSGUI
21
10.01.2007
12:33:33
82944
E
22
Prg
SAPLSTTM
22
05.07.2005
13:10:18
69632
E
23
Prg
SAPLSBDC
23
05.07.2005
13:10:18
44032
E
24
Prg
CL_DATAPROVIDER===============CP
24
28.02.2005
21:00:46
49152
E
25
Prg
%_CCNTL
24
18.02.2005
14:15:08
15360
E
26
Typ
OBJ_RECORD
0
14.02.1998
08:30:43
2048
27
Prg
SAPLSTUP
27
08.03.2005
19:04:31
73728
E
28
Prg
SAPLCNDP
28
01.12.2006
22:04:33
193536
E
29
Prg
SAPSHDTV
18
05.01.2005
16:26:16
33792
E
30
Typ
SHDSTU
0
14.12.1998
23:15:34
2048
31
Typ
SHDSTCIU
0
14.12.1998
23:15:34
2048
32
Prg
SAPFGUICNTL
0
18.02.2005
14:15:08
24576
E
33
Prg
SAPLOLEA
33
05.07.2005
13:10:18
96256
E
34
Prg
SAPLSFES
34
10.01.2007
13:26:20
256000
E
35
Prg
SAPLSPLUGIN
35
09.09.2004
14:18:36
8192
E
36
Typ
ARFCRDATA
0
13.02.2005
18:20:24
7168
37
Prg
SAPLGRFC
37
13.02.2005
18:20:25
16384
E
38
Typ
SWCBCONT
0
15.11.2000
17:55:11
3072
39
Typ
OLE_VERBS
0
04.04.1995
16:02:20
2048
40
Typ
OLE_PA
0
04.04.1995
16:02:19
2048
41
Typ
ACGL_HEAD
0
11.12.2003
14:59:21
8192
42
Typ
RF05A
0
11.04.2005
11:50:21
38912
43
Typ
TCURC
0
01.12.1999
12:14:40
2048
44
Prg
SAPLFAGL_ACTIVATION_SERVICES
44
30.04.2007
17:00:55
45056
E
45
Prg
SAPLSTR9
45
09.05.2006
10:39:47
39936
E
46
Prg
CONTEXT_X_TR_SYS_PARAMS
45
09.05.2006
10:39:47
40960
E
47
Typ
TCONT
0
09.09.2004
14:18:43
2048
48
Typ
CONTEXTB
0
09.09.2004
14:15:52
6144
49
Typ
FAGL_ACTIVEC
0
19.08.2004
16:55:10
5120
50
Typ
FAGL_CHECK_SETUP
0
11.12.2003
15:01:05
2048
51
Prg
SAPLSHD0
51
03.01.2007
06:52:22
232448
E
52
Prg
SAPLBFFM3
52
10.01.2007
13:15:21
169984
E
53
Typ
OFIWA
0
15.04.1998
00:11:05
2048
54
Typ
FTEXTS
0
20.08.2001
12:13:26
3072
55
Prg
SAPLITSR
55
10.01.2007
14:23:52
107520
E
56
Typ
FMRFC
0
13.08.1997
12:32:59
2048
57
Typ
TBE01
0
20.01.2003
16:41:38
2048
58
Typ
TBE31
0
03.09.1997
03:01:11
2048
59
Typ
TBE31
0
03.09.1997
03:01:11
2048
60
Typ
TBE11
0
03.09.1997
03:01:06
2048
61
Prg
CONTEXT_X_SP_INFO
55Hello Sowmya
The BAdI BADI_LAYER is not defined for <b>Multiple-Use</b> (see checkbox on tabstrip <i>Attributes</i>).
Apparently you have created <i>several </i>implementation of this BAdI and activated <i>several </i>(at least 2) of these implementations.
If you inactivate all except a single implementation the BAdI (and all transactions using this BAdI) should work again.
Regards
Uwe
Maybe you are looking for
-
List EM Users and their access to targets
Hi, We have a requirement to show who has access to Enterprise Manager and what can each person do. Seems simple enough. Still, lol, I cannot find a report or an example of how to do this. How do I list all of the administrators in Enterprise Manager
-
I applied hotfix kb 2842111 for my remote desktop server 2012, but I still get warning {Delayed Write Failed} in Event Viewer and it caused my application to hang. Is there a registry I can tweak to fix this problem or is there a new hotfix from Micr
-
Accruals interfaced from Oracle Purchasing to Oracle Projects
Hi Accrue Expense Items in Purchasing Options is set to Period End. If a purchase order which is project related is receipted, will an accrual be interfaced to Oracle Projects? Thanks for any help Regards Sean
-
My task bar and start menu have disappeared how do I recovery them?
The task bar has disappeared on my HP Touchsmart 610-1280qd. I have searched at all of the edges like suggested but mothing showed up. Any suggestions?
-
Hi Guys , I have a small dought related to data migration . Like i have a field FISCPER - Fiscal Year /Period is available in the Datasource (Example, 0FI_GL_6) but not available in BSEG,BSEG_ADD ,ZTABLES, FAGLFLEXA Tables.. How to get in