Version XI 11.0.02 overlaps nearly all desktop and start menu applets

Help!
Running Windows 7 and have repeatedly installed & uninstalled Reader. After installation, Reader overlaps applets. Reader works fine. Can not use desktop or start menus. Then I uninstall Reader. Presently it is not installed.

Hi,
This might help you : http://helpx.adobe.com/acrobat/kb/application-file-icons-change-acrobat.html
Thanks

Similar Messages

Windows 7, when adobe downloaded and installed all desktop and taskbar icons become adobe icons, why

Windows 7 operating system, when Adobe downloaded and installed all desktop and task bar icons have the Adobe icon and will not open, why does this happen?

to answer your questions, i) tried installing both
ii) Tried 9 and 10
iii) Free version of both
iv) No!
I turned off the anti virus but the same thing happened, I'm getting tired of downloading and then having to uninstall Adobe. There must be an answer, something on the computer is not right. I had problems with a CD drive my computer stopped reading it, Replaced the CD burner and it still would not read, took it to be repaired and was a faulty registry which the guy at the shop fixed but the problem with adobe is only since I had the computer fixed last week or is this just a coincidence?

Project Manager will not collect all files and Start a Complete New Project

As editor of several projects consisting of multiple terrabytes of footage, it's very important to me to be able to use the project manager to collect all files and start a new project. However, this is not happening!! After I've completely finished a project I should be able to save a new "trimmed" project in the desired location of choice. When I use this feature with PrPro CS 4.2.1 - I only get a partial trimmed project that when opened asks where are the missing files. I've also tried using the project manager to collect all files and move to a new location. Again, only a part of my project is being moved!!!! Earlier versions of the PpPro had no problems with this function. I've got two systems and both of them are identical in actions. Any help would be greatly appreciated!!!
BBTv

How can one do that if each project has thousands of pieces of video, text templates, music scores, photoshop documents, after effect files and so on? The number of different folders per project is almost mind boggling. Any help at all in a quick fix or update or anything would be greatly appreciated. I don't have any problem with my other editing programs and have run earlier versions of PrPro that had no problems with collecting all the files within a project and exporting them to a new location throught project manager either in trimmed or full projects. I really hate to have to start using Final Cut again because of such an easy issue. I know I'm overlooking something and any help would be greatly appreciated.

I bought this apple ipad from pawn shop and have receipt. its locked by previous owner and pawn shop had no info on previous owner to contact. how can I delete all content and start fresh so my grandson can use for college?

i bought this apple ipad from pawn shop and have receipt. its locked by previous owner and pawn shop had no info on previous owner to contact. how can I delete all content and start fresh so my grandson can use for college?

If it's activation locked, you can't; go back to the shop and ask for a refund.
(120778)

I have a problem with my mac i have too many archives and programs and i want to delete all files and start at the begin my mac with out do format

i have a problem with my mac i have too many archives and programs and i want to delete all files and start at the begin my mac with out do format

I do not recommend reformatting your harddrive and reloading your software. This is a Windows thing. On an older mac it may be difficult to find all your software again.
Best to have greater than 2gig of free space. Many posters to these forums state that you need much more free space: 5 gig to 10 gig or 10 percent of you hd size.
(0)
Be careful when deleting files. A lot of people have trashed their system when deleting things. Place things in trash. Reboot & run your applications. Empty trash.
Go after large files that you have created & know what they are. Do not delete small files that are in a folder you do not know what the folder is for. Anything that is less than a megabyte is a small file these days.
(1)
Run
OmniDiskSweeper
"The simple, fast way to save disk space"
OmniDiskSweeper is now free!
http://www.omnigroup.com/applications/omnidisksweeper/download/
This will give you a list of files and folders sorted by size. Go after things you know that are big.
(2)
These pages have some hints on freeing up space:
http://thexlab.com/faqs/freeingspace.html
http://www.macmaps.com/diskfull.html
(3)
Buy an external firewire harddrive.
For a PPC computer, I recommend a firewire drive.
Has everything interface:
FireWire 800/400 + USB2, + eSATA 'Quad Interface'
save a little money interface:
FireWire 400 + USB 2.0
This web page lists both external harddrive types. You may need to scroll to the right to see both.
http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
(4)
Buy a flash card.

What to do about Finder options for "all desktops" and "none" not working

I have seen only one thread dealing with an issue similar, not identical, to mine. Hope I'm not missing something obvious.
I have experiment with the finder showing after upgrading to Lion. I have consistently found that the show options of "all desktops" and in "none" needs to be altered after I re-boot. If I have it as 'all desktops' it doesn't show unless I change it to "none." If I have it set to "none" then I have to change it to "all desktops" or "this desktop" after re-booting.
I even tried to reduce the number of desktops. That didn't work.
I tried deleting my finder preferences file and that hasn't worked.
Is this a bug or do I need to do some other process?
Thanks.

Solved through applecare; had me delete all of my preferences and start over (with saving things like mail, dock settings). Has worked fine for weeks.

I have a few collections, but not all PC's in those collections are listed in "All Desktop and Server Clients".

I have a few collections, but not all PC's in those collections are listed in "All Desktop and Server Clients". Does anyone happen to know the reason for this? It should have at least the same number of clients as the largest collection.
Thanks,
James
James A+, Network+, MCP

Hi James,
The All Desktops and Server collection only contains devices that show client=yes.
Meaning the Configuration Manager client is installed on those devices.
This WQL query will give you a collection of all devices that do not have the client installed.
select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System where (SMS_R_System.Client is null or SMS_R_System.Client = 0) and SMS_R_System.Name != 'Unknown'
Another handy collection is all clients that are inactive (No communication for the default 7+ days)
select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_CH_ClientSummary on SMS_G_System_CH_ClientSummary.ResourceId = SMS_R_System.ResourceId where SMS_G_System_CH_ClientSummary.ClientActiveStatus = 0
I normally create both and then a third collection of all devices and exclude the above two which should show you all healthy devices.
Have a look at the ccmsetup.log file on the client if it has attempted to install the ConfigMgr client but failed.

Pin shortcuts to Taskbar and Start Menu for all users in Windows 7

How can i Pin shortcuts to Taskbar and Start Menu for All Users in Windows 7? Office 2007 Word, Excel and Outlook.

There are a few ways...
You can configure a default profile which will give you the ability to setup the Start Menu as you want it with the items pinned how you like. However, in my experience customizations done to the Taskbar are not maintained in a default profile.
So, one way to get around that would be to create a script and use the "Active Setup" hooks that are built into Windows 7 to achieve the desired results.
If you combine this script...
http://blogs.technet.com/deploymentguys/archive/2009/04/08/pin-items-to-the-start-menu-or-windows-7-taskbar-via-script.aspx
With Active Setup...
http://www.visualbasicscript.com/Active-Setup-Examples-m67461.aspx
You can get the results you want to get...
Pinned items on the Taskbar have two components, one is in the file system and the other is in the registry. You could also use GPO Preferences to add both components to a new profile and therby get similar results. I played around with this method a little and did get it to work also.
Mike N.

I'm using the sync option for when I'm not near my desktop and no matter what it won't work its telling me my account name or password is not correct and it is!

I'm using the sync option for when I'm not near my desktop and no matter what it won't work its telling me my account name or password is not correct and it is!

This is from my personal experience:
It almost happens every time I tried to connect with Sync from my Android phone, the window asking me to enter my account name and password always shows up. And if I enter the information, it'll say I have the wrong password, etc. My workaround is to click the "cancel" button. But it does not cancel immediately. The window will stay on for a while (usually a few minutes), then it'll disappear and start connecting to Sync. And it'll connect and sync successfully.
You can try this workaround but you have to be patient to wait for the window to disappear.
I don't know what is the cause of this, but it has happened ever since FF4 for Mobile came out. I have searched around and couldn't find any solutions.

I have a Mac running OS X 10.6.8 and have installed all updates and disabled Java Applets. Do I need to put virus protection on this computer and, if so, any recommendations?

I have a Mac running OS X 10.6.8 and have installed all updates and have disabled Java Applets. Do I need to install antivirus software and, if so, do you have a recommendation on what works best.

Mac OS X versions 10.6.7 and later have built-in detection of known Mac malware in downloaded files. The recognition database is automatically updated once a day; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders. In most cases, there’s no benefit from any other automated protection against malware.
The most effective defense against malware is your own intelligence. All known malware that affects a fully-updated installation of Mac OS X 10.6 or later takes the form of trojans, which can only work if the victim is duped into running them. If you're smarter than the malware attacker thinks you are, you won't be duped. That means, primarily, that you never install software from an untrustworthy source. How do you know a source is untrustworthy?
Any website that prompts you to install a “codec,” “plug-in,” or “certificate” that comes from that same site, or an unknown site, merely in order to use the site, is untrustworthy.
A web operator who tells you that you have a “virus,” or that anything else is wrong with your computer, or that you have won a prize in a contest you never entered, is trying to commit a crime with you as the victim.
“Cracked” versions of commercial software downloaded from a bittorrent are likely to be infected.
Software with a corporate brand, such as Adobe Flash Player, must be downloaded directly from the developer’s website. No intermediary is acceptable.
Disable Java (not JavaScript) in your web browser(s). Few websites have Java content nowadays, so you won’t be missing much. This setting is mandatory in Mac OS X 10.5.8 or earlier, because Java in those versions has bugs that make it unsafe to use on the Internet. Those bugs will probably never be fixed, because those older operating systems are no longer being maintained by Apple. Migrate to a newer version of the Mac OS as soon as you can.
Follow these guidelines, and you’ll be as safe from malware as you can reasonably be.
Never install any commercial "anti-virus" products for the Mac, as they all do more harm than good. If you need to be able to detect Windows malware in your files, use ClamXav — nothing else.

All the icons in the desktop, taskbar and start menu are messed up

I installed Windows 7 5 days ago.   Somehow all the icons in the desktop, the taskbar and the start menu have been replaced by a notepad icon. Additonally, When I click the Start button, the captions for the different icons are like "calculator.lnk", "snipping tool.lnk", etc. If I click on any of these options in the menu, instead of opening the application, it opens notepad. As if notepad had become the default application for all the links.
Why did this happen, and how can I work around it?   Looks like this is a nice bug to fix in SP1.

Hi SnowflakeCoder,
According to your problem description, it seems that the icon cache and the file associations are damaged.
I suggest we perform the following troubleshooting suggestions to check the issue.
Suggestion 1: Rebuild icon cache
=========================
1. Click “Start” and open “Computer”.
2. Click “Organize” on the Tool bar, and choose “Folder and Search Options”.
3. Then click the “View” tab, check to select the “Show hidden files and folders option”, and click “OK”.
4. After that, enter the following directory and press Enter.
%userprofile%\AppData\local
5. Find the “IconCache.db” file, and rename it as “IconCache.db.old”.
6. Close the window, and restart the computer.
Suggestion 2: Restore the Start Menu via previous versions
=========================
1.    Click “Start” and open “Computer”.
2.    Enter the following directory and press Enter.
C:\ProgramData\Microsoft\Windows\Start Menu
3. Right-click the “Programs” folder, and then click “Restore Previous Versions”.
4. You'll see a list of available previous versions of the folder.
5. Select a previous version of the file or folder you would to restore, click “Restore” button.
6. Please click “Restore” if the window titled Previous Versions prompts.
7. Please click “OK” when the file or the folder has been successfully restored to the previous version.
8. Click “OK” again.
If both suggestions cannot fix the issue, you may also try the System Restore which should be the easiest way to fix this issue.
Suggestion 3: Run System Restore
=========================
1. Click “Start”, type “System Restore” (without quotation marks) in the Search bar, and then click “System Restore” in the “Programs” list.
If you are prompted for an administrator password or confirmation, type your password or click “Continue”.
2. In the “System Restore” dialog box, click “Choose a different restore point”, and then click “Next”.
3. In the list of restore points, click a restore point that was created before you began to experience the issue, and then click “Next”.
4. Click “Finish”.
The computer restarts, and the system files and settings are returned to the state that they were in at the time that the restore point was created.
Please check the result again.

Want to stop all sounds and start them up too

Hi.
I have a flash website that is entirely based on videos. It
loads and starts with an intro. Then a scene where a loop movie
plays, and depending on which objects from the scene you press on a
different videos start playing and then back to the scene.
The problem si that, as with all videos, the sound is
incorporated into the different videos that load.
I want to stop or set the volume to zero by pressing on a
button and to restore the sound by pressing again. How can i do
that and have the sound stopped even if i load different movies all
with their sound incorporated?
Thank you.

I do not recommend reformatting your harddrive and reloading your software. This is a Windows thing. On an older mac it may be difficult to find all your software again.
Best to have greater than 2gig of free space. Many posters to these forums state that you need much more free space: 5 gig to 10 gig or 10 percent of you hd size.
(0)
Be careful when deleting files. A lot of people have trashed their system when deleting things. Place things in trash. Reboot & run your applications. Empty trash.
Go after large files that you have created & know what they are. Do not delete small files that are in a folder you do not know what the folder is for. Anything that is less than a megabyte is a small file these days.
(1)
Run
OmniDiskSweeper
"The simple, fast way to save disk space"
OmniDiskSweeper is now free!
http://www.omnigroup.com/applications/omnidisksweeper/download/
This will give you a list of files and folders sorted by size. Go after things you know that are big.
(2)
These pages have some hints on freeing up space:
http://thexlab.com/faqs/freeingspace.html
http://www.macmaps.com/diskfull.html
(3)
Buy an external firewire harddrive.
For a PPC computer, I recommend a firewire drive.
Has everything interface:
FireWire 800/400 + USB2, + eSATA 'Quad Interface'
save a little money interface:
FireWire 400 + USB 2.0
This web page lists both external harddrive types. You may need to scroll to the right to see both.
http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
(4)
Buy a flash card.

I can't print from Firefox (on a MacBook) since I tried to instal the new version. How do I uninstall it (all components), and then reinstall?

Can't print from Firefox - it crashes.
== This happened ==
Every time Firefox opened
== I upgraded ==
== User Agent ==
Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_5_8; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

Also can't print from FF 3.6.12, but it doesn't crash. There's no error message, no job gets queued to the printer. Other applications (including Safari) print without a problem.

I downloaded the trial version of LR 5 just to get a feel of LR 5. However, now that I have bought it, it has all my photos in a mess and I need to delete all photos and start with a blank LR...Help!

How do I save my photos and then reimport them??

You can create a new catalog which will be empty File->New Catalog. There is no SAVE command in Lightroom, so in general you don't need to SAVE your photos. If you have done some editing of the photos, and you want that to show up in the new catalog, select the photos and then Ctrl/Cmd-S to save the metadata with the photos.
If all your photos are "in a mess" (whatever that means), you might consider learning how to organize in Lightroom by getting rid of that mess using Lightroom methods. But generally, if you are beginning and your photos are all "in a mess", then creating a new catalog and importing again will result in the same mess. You would need to identify what you did wrong, and fix that.

I get the "unresponsive script" message now for nearly all sites, and sometimes this is followed by the popup box saying that the "plugin contain for Firefox has stopped working."

Many sites now say that a script is unresponsive. And by unresponsive I mean that the whole browser slows to a crawl and it can take ~20 minutes to get 2 pages loaded.
Also, I sometimes get a popup window saying the the plugin container has stopped working.
This whole issue is making Firefox unusable. I cringe to say it, but I'm currently in IE. :-/

See http://kb.mozillazine.org/Plugin-container_and_out-of-process_plugins

Version XI 11.0.02 overlaps nearly all desktop and start menu applets

Similar Messages

Maybe you are looking for