Versions missing in imported project

I've imported an Aperture project from another Aperture Library. I can see all master images, but there are no versions.
Rebuilding the library didn't show any effect. Any hints how I can get the versions?
Thanks in advance,
Boris

You likely will find a review of the parts of Aperture useful.
Covered more thoroughly in the first 7 chapters of the User Manual.
By which I mean no scolding -- post back with more info on what you actually did -- but to get up to speed with Aperture quickly I suggest first learning what all the parts are.

Similar Messages

Adjustments missing on imported projects in 3.2.2.

In 3.2.2, I'm having problems with importing a library from my laptop into my master library on my desktop. Exporting the project as a library and then importing that library stopped working since the previous release. I was able to import the entire library, but it took a couple of tries. The first time my adjusments and keywords were missing. I deleted the library and the second try seemed to work. Is this a known issue that's being worked?
Thanks,
Blake

Blake,
No one here can say what is being worked or what isn't, or whether the Aperture development team knows about a particular problem. (However, someone may be able to tell you if they have experienced the same problem.)
Have you tried the Troubleshooting Basics on either or both libraries?
I deleted the library and the second try seemed to work.
Are you implying that you deleted your primary ("into") library? That sounds like your master library, so I'm not sure I understand that remark properly, since I doubt you are deleting your master library.
nathan

I just find out many images missing from my most important project for no reason and don´t know what to do!

I was checking my SDHC cards to see which ones had already been downloaded to my computer and sudenly after I inserted one of the cards an anouncement poped out telling me Aperture had trouble importing many files... since this card had already been downloaded in one of my projects and had been working on some of the pictures I did not mind and took the card out and formated it in my camera (as I said before all the pictures had been downloaded before!) and I went to work on Apperture. When I opened the project I was going to work in I found lots of pictures missing!
I don´t know how to recover this pictures or if it can be done!
This is my most important project to date!
I will greatly appreciate any help.
Alberto Ayala

Hello Léonie,
I will try to be more specific:
I inserted my memory card and opened Aperture. I Pressed import and chose an existing project as a destination after choosing only the pictures I wanted to keep for imediate use (done this same precedure before). The importing procedure started and everything was "normal" but the "procesing" indicator (the spinning circle in the low left corner) never stoped (even the day after) so I quit Aperture,turned of my computer and took out the memory card.
Later I restarted my computer, oppened Aperture and saw all the pictures I wanted there, I even made versions and worked on some of them and everything was fine so far... The big problem came when I was cheking my memory cards -days later- to erase some of them for reuse and to make a back up copy of the full card in a diferent folder on the desktop of my computer (as I told before In Aperture only downloaded some pictures) and inserted the card that presented the continus "procesing" inconvinience: Somehow it created a link to Aperture and a notification poped telling me that some files where unable to download...
Since I had already seen and worked with the files in Aperture I thought the message was a mistake (the files had been imported ok before!) so I took out the card and reformated it in my camera (BIG MISTAKE!) and for my surprise when I wanted to work with this files and their versions and opened Aperture all of them were gone as If they had never been imported!
I opened the back up folder on my desktop just to find none of the files was saved there even though the downloading had run fine...
I tried to restore my Aperture library from Time Machine this morning but I think I made another BIG MISTAKE when answered to replace my library instead of keeping both... I found some files replaced, none of the diferent versions I had done, some files missing, some foulty tumbnails and God knows what else...
I´m very frustrated and disapointed and don´t know if there is anything I can still do to recover my files...
I don´t know if I should blame Apple´s Aperture or the card´s manufacturer for the origin of this problem but how can I trust my work to this combination of factors?
Thanks for your concern Léonie and have a good new year!

Can't import project from older version

I can't import project into a newer version of final cut as the project is whited out.and when i do get around it the error says:
The document "CurrentVersion.fcpevent" could not be opened Final cut pro cannot open files in the "final cut pro event" format.
I'm working in 10.0 and trying to open on another computer in 10.1.4
Any ideas would be great.
thanks

10.0 and 10.1.4 are very different, but in neither of the the procedure included "opening" such files.
In 10.0, you simply let the content be in the designated locations and the program would find it.
In 10.1 and beyond, projects and events reside in libraries, which are now like regular FCP X "documents" thare are opened and closed in the common way documents usually are.
To use older material, you need to update it. This is done by letting the stuff in its original locations, starting FCP X and doing File->Update Projects and Events... This creates a new library with your old material.

Version management- the 'I' type (version created by import)

Hi,
We are in the midst of upgrade. I noticed that after the system copy, some program screens are missing in the new system. A check on the program version in the old system shows this:
Version Cat Fla SAP Rel. Arch Request    Project
Version(s) in the development database:
activ          X 700
Version(s) in the version database:
00002 I          700       UPGRADE700
00001 S          40B       D01K905538
We are thinking to do a transport to the new system to resolve the missing screens problem. However, there is no way I can navigate to the transport request created with UPGRADE700. Does anyone know how is this being created? It has version type 'I' which means is a version created by import?
Thanks in advance!

Hi,
Yes, you need to import the screen once again separately. Regarding the version Mgmt Transport indicators:
'I' --> Imported Version
'S' --> System Request (Before an import)
'U' --> User Request
Thanks,
Shiv

Importing project from Pro 1.5 to CS5

I just purchased an iMac. Loaded CS5, but could not import a project I worked hard on Adobe Premier Pro 1.5. I get an error message that reads "This project was saved in a version prior to Adobe Premiere Pro CS3 and cannot be opened on a Mac."
Can anyone give me advise as to how best I can import my old projects?
Regards,
Ban

GLenn,
Good work, and there will be something extra in your Adobe payroll envelope.
The problem with the PrPro 1.5 to CS5 Mac, is that there was no PrPro 1.5 Mac version. With older Pr versions, say 6.5, there is not a platform limitation. Older (pre Pro) Mac Projects work fine in my PC. With the Pro introduction, PrPro 1.0/Pr 7.0/PrPro 7.0 (rather an anomaly), Mac support was stopped, until CS3. This created a gap, with ONLY PC versions, and no Mac compatibility. As Harm and GLenn pointed out, the only workflow is to take the older PRPROJ file (created on a PC), and Improt/Open - Save (essentially Converting it) in version CS3 on the PC, and that will allow a Mac to use the PRPROJ file.
This is when it pays to have friends on PC's, running PrPRo, so that they can do the Conversion for you. Baring that, then it's great to have folk, like GLenn, on the forum, who will do it for you. It's simple, so long as there is a PC, running CS3, or later, to get those Projects into a format/version, that the Mac can read. Time for some "bi-partisan" cooperation.
Glad that you got it to work, and happy editing.
Hunt
PS - one little caveat: There are differences in the Effects & Transitions, between the platforms, so a Project that was created in PrPro 1.5 (or 1.0, or 2.0), might have Effects, or Transitions, that do not exist on the Mac. Also, if one had 3rd party Effects or Transitions on the older PC, then those might show as missing, when the Project Opens on the Mac. In most cases, PrPro is very good at pointing out the exact location, and more details, where those appear. One can then just make note of the location, and go there to replace the missing Effect, or Transition, with one that does exist on the Mac. For me, going from Mac to PC, this process has been perfect, but I cannot say that it would be in all cases going from PC to Mac.

Importing project from ..... Ulead Media Studio Pro

Hi there,
I made a project in Ulead MEdia Studio Pro 7 (really, I did....), and I'm not satisfied with the results : the video is like a computer animated movie, and I see horizontal lines.
I'm told my Canopus Raptor RT doesn't work properly with Ulead, so I switched to Adobe Premiere 7 Pro.
Is there a possibillity to import the project (a whole day work....) into Adobe Premiere, or is that impossible.
Further : what would be the right settings for this 16:9 movie (PAL) to MAKE the final movie ? It is all digitally mastered, so I want a perfect result.....
Regards,
Marco

GLenn,
Good work, and there will be something extra in your Adobe payroll envelope.
The problem with the PrPro 1.5 to CS5 Mac, is that there was no PrPro 1.5 Mac version. With older Pr versions, say 6.5, there is not a platform limitation. Older (pre Pro) Mac Projects work fine in my PC. With the Pro introduction, PrPro 1.0/Pr 7.0/PrPro 7.0 (rather an anomaly), Mac support was stopped, until CS3. This created a gap, with ONLY PC versions, and no Mac compatibility. As Harm and GLenn pointed out, the only workflow is to take the older PRPROJ file (created on a PC), and Improt/Open - Save (essentially Converting it) in version CS3 on the PC, and that will allow a Mac to use the PRPROJ file.
This is when it pays to have friends on PC's, running PrPRo, so that they can do the Conversion for you. Baring that, then it's great to have folk, like GLenn, on the forum, who will do it for you. It's simple, so long as there is a PC, running CS3, or later, to get those Projects into a format/version, that the Mac can read. Time for some "bi-partisan" cooperation.
Glad that you got it to work, and happy editing.
Hunt
PS - one little caveat: There are differences in the Effects & Transitions, between the platforms, so a Project that was created in PrPro 1.5 (or 1.0, or 2.0), might have Effects, or Transitions, that do not exist on the Mac. Also, if one had 3rd party Effects or Transitions on the older PC, then those might show as missing, when the Project Opens on the Mac. In most cases, PrPro is very good at pointing out the exact location, and more details, where those appear. One can then just make note of the location, and go there to replace the missing Effect, or Transition, with one that does exist on the Mac. For me, going from Mac to PC, this process has been perfect, but I cannot say that it would be in all cases going from PC to Mac.

Audio missing from saved project

Hi All...
New user here, first-time "test movie" combines video with ambient audio, stills and a music track. Based on Mr. Hunt's article, here's the background information:
Dell Precision T1500 / Windows 7 Professional 64-bit OS, no pen or touch input
Processor: Inter Core i7CPU 870 @ 2.93 GHz
Installed memory: 8 GB
Single hard drive: 930 gb SATA file system, NTFS, compression unchecked / no RAID
"D" drive is HL-DT-ST- DVD+-RW GH50N DVD burner
"E" drive is HL-DT-ST BD-RE BH30N CD ROM drive
No external drives
Virtual memory: 8151 mb dynamically controlled by windows
Video Card: NVDIA QUADRO FX 580 / pci BUS 1 / driver no. 8.17.12.5896, driver date 7-9-2010
Audio System: Realtek high definition audio, 2-channel 16-bit 48000Hz / driver version 6.0.1.5919 / driver date: 8-18-09
Using PE 8.0.1, updated July 14
Project settings: Editing Mode: HD 1080i, timebase 29.97 fps, frame size 1920 x 1080, 16:9 / pixel aspect ratio: square pixels (1.0) / Fields: No Fields (progressive scan) / Display Format 30fps drop-frame timecode / title safe area 20 % / action safe area 10 % audio sample rate: 48000 Hz
Video clips: MPEG movies, image size 1440 x 1080, pixel depth: 32, frame rate 29.97. Average data rate 630-650 KB/second (there are a couple dozen clips, I didn't check them all...)
Source audio format: 48,000 Hz Compresses stereo; project audio format 48,000 Hz 32-bit floating point stereo
Music track: MP3 source audio format: 44,100Hz compressed stereo; project audio format 44,100 Hz 32-bit floating point stereo; average data rate 23KB/sec
Still images: all JPEGs, some 1280 x 960, some 2048 x 1636, pixel depth 32, pixel aspect ratio 1.0.
Other app's typically running: IE and/or Firefox, perhaps MS word and/or Publisher, Mozilla's Thunderbird. However, I've "saved" this project with *no other apps* running, and there's still no audio.
Hope all this suggests a solution...
Thanks for your help, all...
T

Thanks for all this information, T.
So why are you editing a 1440x1080 video in a 1920x1080 project? If this is AVCHD footage, it's very important to use the right project settings.
That has no effect on your audio, of course. But it could affect your video quality when you output your file.
That say, can you explain what you mean by "Audio missing from save project"?
Do you mean that you don't hear the audio in Premiere Elements -- or that you don't hear it when you output, say, an MOV or WMV file?
What file format are you exporting and what are you playing soundless this file on?
And, finally, is there no audio whatsoever, or is only some audio (music, for instance) missing from your output?

Can Premiere CS3 import project from Premiere 6.5

I see elsewhere that Premiere Elements cannot import project file from Premiere 6.5 and wondered if CS£ would. It would get me out of a hole if it could.

Sorry that I missed this thread first time around, and only just now noticed it. In Nick's (the OP) case, I think that Colin helped him with his problem.
As Nick, the OP, found PrElements will NOT Open a PrPro Project. As PE does not allow Import of a Project into another Project, that avenue is out. If one attempts to Open a PrPro Project in PE, they'll get an error message, along the lines of "Fool, this is a PrPro Project. You cannot Open it in PE. You must get PrPro. Fool." OK, maybe not that harsh, but close. Now, with some exceptions, PrPro WILL Open PE Projects. The biggest exceptions will be if Themes or Instant Movie were used. These do fritz up the works quite a bit. Still, a straight PE Project (PREL) will Open in PrPro fine, so long as the general versions of each program are close, or the PrPro version is newer.
As Colin points out, the only problem with going from an older version of a Project to a newer version of a Project is that "hole" that exists, because Pr was not ported for the Mac. This was from PrPro 1.0 (called 7.0 in some circles), PrPro 1.5 and PrPro 2.0. During that time, all Pr Projects were PC-only. Mac's, regardless of whether they are running CS3 (first version to be dual-platform, since Pr 6.5) or CS4. No Open, no Import.
The "trick" is to find a PC-user, who has at least CS3, or CS4, and have them Open the PrPro 1.0 through 2.0 Project. Once "converted" and Saved, then the Mac-user can Open it, provided that they have the same version of PrPro, or a later one. If the Mac-user has CS3, and the PC-user has CS4, this Open/Save will not work. If the PC-user has CS3 and the Mac-user CS4, it will work. This situation often shows Mac-users that PC-users are not such bad people after all, and that they'll usually put platform differences behind to help a fellow PrPro-user.
Above, I've outlined the steps and have also added some warnings, such as 3rd party hardware (like Matrox), Effects and Transitions. Heed those warnings carefully.
This will not help Nick now, but might help someone in the future. Remember, if you're on a Mac, and the Project was created in that time from PrPro 1.0 - 2.0, you WILL need a PC-friend to help you, and you will need to insure that your version of PrPro is at least equal to, or newer than, the PC-user's.
Good luck,
Hunt

Error while deploying import project

I am getting the following error while deploying the import project.
I dont get any error while importing assets from the xls sheet. it successfully imports all the assets.
It only gives error when i try to deploy this project.
I have checked all the assets and i dont see any id as null in the data that i m importing.
09:28:31,978 ERROR [DeploymentManager] item = repositoryMarker:mark5621005 cause = CONTAINER:atg.deployment.DistributedDeploymentException; SOURCE:atg.repository.Repos
itoryException: Ids cannot be null
        at atg.deployment.repository.RepositoryWorkerThread.processMarkerForAddUpdatePhase(RepositoryWorkerThread.java:274)
        at atg.deployment.DeploymentWorkerThread.processMarkerPhase(DeploymentWorkerThread.java:562)
        at atg.deployment.DeploymentWorkerThread.run(DeploymentWorkerThread.java:335)
message = Deployment Failed time = Wed Jul 24 09:28:31 PDT 2013 atg.deployment.DeploymentFailure@13738c4f
CAUGHT AT:
CONTAINER:atg.deployment.DistributedDeploymentException; SOURCE:atg.repository.RepositoryException: Ids cannot be null
        at atg.deployment.repository.RepositoryWorkerThread.processMarkerForAddUpdatePhase(RepositoryWorkerThread.java:274)
        at atg.deployment.DeploymentWorkerThread.processMarkerPhase(DeploymentWorkerThread.java:562)
        at atg.deployment.DeploymentWorkerThread.run(DeploymentWorkerThread.java:335)
Caused by: atg.repository.RepositoryException: Ids cannot be null
        at atg.adapter.version.VersionRepository.getItem(VersionRepository.java:903)
        at atg.deployment.repository.RepositoryWorkerThread.getSourceItem(RepositoryWorkerThread.java:995)
        at atg.deployment.repository.RepositoryWorkerThread.deployItem(RepositoryWorkerThread.java:1024)
        at atg.deployment.repository.RepositoryWorkerThread.processMarkerForAddUpdatePhase(RepositoryWorkerThread.java:262)
        ... 2 more

Hi,
It looks like the mapping is either wrong or some conflicts between pub and target database. What is the id-column-name for this item? Can you also turn on the debugs for that repository while deploying and get the insert statement that is throwing the error? It would be helpful if you can also share the item definition.

10.2 crashes when I try to convert old libraries for use in the new software. Is there a workaround for this? Or will i have to continue using the previous version to complete older projects?

Final Cut Pro X 10.2 crashes when I try to convert old libraries for use in the new software. Is there a workaround for this? Or will I have to continue using the previous version to complete older projects? the only foreseeable solution is to begin any new projects on 10.2 or importing footage on 10.2 and starting form scratch--which is something i definitely don't want to do or have time to do. ANY advice, thoughts, or opinions would be greatly appreciated! Thank you!
Running 10.10.3 // MacBook Pro (Retina, 15-inch, Early 2013) // 2.4 GHz Intel Core i7 // 8 GB 1600 MHz DDR3

Exactly the same problem with me.
Some other threads advice to remove fonts, clean the caches, remove add ins but nothing works consistenty, for some it looks like it works, for me it failed.
What I did not try yet, was to move the Render files out of the malicious library to trash.

All clips missing after import from camcorder!

All clips are missing after import from camcorder - Canon ZR20. For some tapes all clips are there, for others there are none. All the files are there in the finder, but I don't know how to have them show up in Final Cut Pro X.
Any suggestions?

Ok - this is frustrating. I have been importing my old miniDV tapes again into FCPX as I wasn't able to transfer all of these projects from iMovie - don't get me started... After importing about 7 of the tapes the first 3 came in fine, but the last 4 didn't have any clips as I said in my original posting. Now after restarting FCPX a couple of times all of a sudden the clips are all coming in! Strange! Guess I'm OK now.

Download Presenter trial in your website but when I published object scorm in zip file miss some important file such as ismmanifest.xml. In fact Moodle upload is wrong! Is it a bug or what? Thank you.

Download Presenter trial in your website but when I published object scorm in zip file miss some important file such as ismmanifest.xml. In fact Moodle upload is wrong! Is it a bug or what? Thank you.

You can publish Adobe Presenter Projects to your Moodle LMS (this will work for many other LMS’ too.)Please follow the steps as mentioned in the blog linked below.
https://blogs.adobe.com/presenter/2013/08/step-by-step-how-do-i-publish-my-presenter-cours e-to-my-learning-management-system.html#more-6260
Regards,
Rajeev.

The package file is missing from the project directory

Today after working in SSIS all day with no problems, I re-opened one of my projects and got the message:
The package file ‘package_name.dtsx’ is missing from the project directory. This package has been skipped, and project will continue to load.
So two of my packages loaded and all remaining packages where skipped, one pop-up dialog for each “missing” package. I then looked in my project directory and all my packages are still there.
1. Has anyone experienced this and found why this happens?
2. Can I just import my packages again and be good to go?
Update:
I discovered that this had to do with renaming my packages in SSDT. For some reason the name changes did not get saved into the project .dtproj file. I was able to correct by renaming the .dtsx files in the project directory to their original name. Then
I re-opened the project, renamed the packages to the new names, saved and closed all packages. At this point you need to save the project, which actually wasn't really straight forward. You need to highlight the project name in Solution Explorer
and then from the File menu select 'Save Selected Items'. This updates the .dtproj file.
Upon closing SSDT, a dialog SOMETIMES appears asking you to save the project, after selecting Yes, the .dtproj file also updates. However, I've realized that upon closing the project, that the dialog asking to save the project does not always appear,
depending on what has changed in the project. To be safe, use method previously described, especially after renaming packages. Also, if SSDT happens to crash after you have renamed a package, the project will not re-open properly.

I remember one such occurrence when I used Source Control (if I recall right it was TFS), and yes, you can simply right-click on the packages folder and choose 'add existing package'.
But check for project file perhaps it has a wrong reference. E.g. something from the outside manipulated on the package files.
Arthur
MyBlog
Twitter

Raw files missing in import direct from canon eos 350D

Hi,
I realise that files missing for import is fairly common, but I still haven't been able to find a reason. I can load jpg and cr2 from a folder no problem, but when I attach the camera, using the latest canon WIA driver on windows xp, the window that comes up shows only the jpgs on my camera. I realise that a workaround is to get the files on the pc and import from there, but I don't have my canon software anymore to do that, and besides, I'm using the trial version to decide whether or not to buy. Is this a LR problem? a canon one? and is there a fix in the pipeline?
Apart from that, really like the product.
Many thanks
Dave

Dave
There was a problem with version 1.0 about importing JPG's and RAW's because although they have a different suffix i.e. JPG or CR2 they have the same file name. LR, as primarily a RAW converter sees these as one and the same file and only imported the RAW file. The work round for this was to rename the JPG's slightly outside of LR using a name that you could yourself identify with the original RAW e.g. RAW 0000001.crs with the JPG being renamed to 0000001A.JPG followed by Importing. I had thought they had cured this with the update but as I don't shoot JPG + RAW haven't tried this for myself. What's strange about your post though, is that if memory serves me correctly the problem lay not in the Importing of the RAW file but in the JPG file as described above. Perhaps someone with more up to date knowledge of this will jump in here.
The importing directly from the camera I referred to earlier was a known problem with Canon cameras - perhaps something to do with the folder structure although I couldn't swear to it. Hence the reference to using a Card Reader. In any event downloading from a Card Reader is faster as I'm sure you know.
If you right click and explore the Card you'll find that not all of the files are empty. The top folder will be something like DCM and by double clicking on this top folder it will open up the others.

Versions missing in imported project

Similar Messages

Maybe you are looking for