Versions now available in the Manage Process Option in Planning
Hi All,
I am using Hyperion Planning 11.1.1.1.0 and have a planning application.
While creating the app i selected 12 months as my year distribution.
I have a version "V1" standard target .. and others "V2" "V3" as Standard Bottom up.
Now when i try to start the budget cycle by going to File --> Workflow -->Manage Process on the Version Selection I can see V2 and V3 which are standard bottom up but dont see V1 which is Standard Target.
Is there a way i can get it on the versions drop down..
If somebody could please suggest ..
Looking forward to soem advice.
Alicia
Target version enables data entry even at the parent level which you would typically do to set targets (..I assume the numbers would already have been approved) and the users will plan their data at the bottom levels accordingly.
Similar Messages
-
I have got the new iPhone 5 and the iOS inside is suppose to have the facebook integration, i have upgraded to the latest version, now i get the facebook option in my notification centre, but i thougth i was going to get all the notifictaion , but sadly i have to log on to fb application to get all my notification updates , nothing is notifyied to me , is there a way to make this happen ??, if yes please help me out , i have tried all the options but doesnt seem to work im afraid ..
Good.
Three things come to mind:
1. I think you're implying when you travel away from your home to a more populated area, the cellular coverage improves and your iPhone works well. Is that right?
2. Do you have a case or some other obstruction over or near your iPhone's antenna? Have you tried moving or removing any possible obstructions near the antenna?
3. AT&T has a (free) app in the App Store called "Mark the Spot". You can use this app to report voice and/or data issues to AT&T, as well as keep up on progress they may be making in improving coverage in your area. Your trouble reports are geotagged (if you wish). -
I have Yosimite Beta on my Mac. Is the regular version now available and if so how do I download that?
It's been out a couple of weeks now. Download it from the App Store.
-
The Manage Bookmarks option has disacppeared from the Mac version.
The Manage Bookmarks option is no longer shown when I click on Bookmarks in the Navigation Toolbar. I have just found out that by opening the sidebar I can move a folder manually while holding the Command key. However, the Manage Bookmarks option was much more convenient. Can you put it back?
"Organize Bookmarks" has been renamed to "Show All Bookmarks" in the bookmarks menu.
-
Trying to start up the manager process in a fresh installation
Version 11.2.1.0.3
Platform : RHEL 5.4
To configure manager process in a machine (which is going to be a target server ), I downloaded GG installer from edelivery.
Unzipped the installable in the desired location. Then I created a basic parameter file for the manager and tried to start up the manager process. But the manager process is not coming up.
This is what I've done till now after the installation of GG (By installation , I mean Unzipping and Untarring)
1. set the env variables for the database
2. Created the parameter file for manager as shown below.
$ ./ggsci
Oracle GoldenGate Command Interpreter for Oracle
Version 11.2.1.0.3 14400833 OGGCORE_11.2.1.0.3_PLATFORMS_120823.1258_FBO
Linux, x64, 64bit (optimized), Oracle 11g on Aug 23 2012 20:20:21
Copyright (C) 1995, 2012, Oracle and/or its affiliates. All rights reserved.
GGSCI (stryker179) 1> info mgr
Manager is DOWN!
GGSCI (stryker179) 4> view param mgr
port 7809
purgeoldextracts /u04/ggData/dirdat/MS/*, usecheckpoints
dynamicportlist 7840-7849
GGSCI (stryker179) 2> start mgr
Manager started.
GGSCI (stryker179) 3> info mgr
Manager is DOWN!I haven't created any gguser at DB level. But that is not a pre-requisite for manager process. Right ?
-- Regarding the logging of GG's errors
Wish I could check some logs to see what is causing this issue ?
Where are the logs (.rpt files) stored ? I believe we have to manually create a directory called dirrpt.
For , the fresh installation, the dirrpt directory was not created. Only the following directories were found after the installation (Untar)
$ ls -alrdFt * | grep /
drwxr-x--- 7 oracle oinstall 4096 Aug 24 07:06 UserExitExamples/
drwxr-x--- 2 oracle oinstall 4096 Aug 24 07:33 cfg/
drwxr-x--- 2 oracle oinstall 4096 Aug 24 07:33 dirprm/
drwxr-x--- 2 oracle oinstall 4096 Aug 24 07:33 dirjar/Hi ,
1. Did you execute CREATE SUBDIRS in GGSCI prompt?
It will create all the required folders like dirprm,dirrpt,dirdef,dirsql,dirdat...etc
Db level user is not required for starting the manager process, But you have to create mgr parameter file under dirprm folder , for that you have to execute ,
GGSCI > EDIT PARAMS MGR
in that file mention the PORT number , usually it will be 7809 ex, PORT 7809,
then start the mgr in GGSCI
GGSCI > START MGR
again if you are getting MANAGER DOWN message then check the details in ggserr.log file which is available in GG home directory where you have unzipped the binaries .
Hopefully this will help you
Annamalai. -
iTunes randomly stops playing purchases that have previously viewed on the same hardware. It has an error message about HD. How can this issue be resolved? What information is available besides the "learn more" option that does not deal with the problem?
Many people have the same problem. However, there is little or nothing readily available to users. This problem has existed for two or more years. Does anyone have anything to offer about this disturbing problem?Thanks for the suggestion kcell. I've tried both versions
9.0.115 and 9.0.124 and both fail with the policy permission error.
I also tried with and without your crossdomain.xml file but
with the same result. It looks like this file is intended for URL
policy, instead of socket policy. Recently Adobe separated the two.
When I run with the files installed on my dev PC, it does
work, which makes sense because the flash player isn't loaded from
an unknown domain.
I did get one step closer. If a crossdomain.xml in the server
root exists and the socketpolicy file is loaded from the app folder
then the first two warnings disappear. The logs now show:
OK: Root-level SWF loaded:
https://192.168.2.5/trunk/myapp.swf
OK: Policy file accepted: https://192.168.2.5/crossdomain.xml
OK: Policy file accepted:
https://192.168.2.5/trunk/socketpolicy.xml
Warning: Timeout on xmlsocket://192.168.2.5:843 (at 3
seconds) while waiting for socket policy file. This should not
cause any problems, but see
http://www.adobe.com/go/strict_policy_files
for an explanation.
Warning: [strict] Ignoring policy file with incorrect syntax:
xmlsocket://192.168.2.5:993
Error: Request for resource at xmlsocket://192.168.2.5:993 by
requestor from https://192.168.2.5/trunk/myapp.swf is denied due to
lack of policy file permissions.
Which basically says, everything is okay, but you stay out
anyway.
PS: I found the XML schema files here:
http://www.adobe.com/devnet/flashplayer/articles/fplayer9_security_02.html
and the socket policy schema:
http://www.adobe.com/xml/schemas/PolicyFileSocket.xsd.
UPDATE: When serving up the policy file on port 843 using the
example perl script then the socket connection seems to be accepted
and the connect succeeds. After that flex hangs trying to logon to
the IMAP server. -
Cannot see the manage dimension option
Hi,
We have newly installed BPC for MS version in our place but we cannot see the manage dimension option in the BPC admin as shown in this screen shot http://wikisend.com/download/618558/BPC admin page.JPG
May i know why?Hi,
This is normal... that mean your task profile for "BPCUser" doesn't offer the possibility to perform Administration tasks.
You should take a look to the Security Guide, in order to see if Primary Administrator or Secondary Administrator could be assigned to your users.
You can find all the guides under this link:
http://help.sap.com/content/bobj/sbu/docu_sbs_bpc_design.htm
But in any case, the problem only comes from a task profile that doesn't allow Admin tasks.
Hope it will help.
Kind Regards,
Patrick -
Could not find the Manage Accounts option in File = Info Tab in MS Project 2010
Hi,
I am using MS Project Professional 2010 first time. I am trying to setup Project Professional 2010 Desktop to connect project server. Somehow I couldn't find the "Manage Accounts" option in File => Info Tab.
Quick help is required!
Thanks,
PrashantJulie,
what did you tell him? I am having the same issue. I can only navigate to ALL Programs>Microsoft Office> Microsoft Office 2010 Tools. There is no Microsoft Project Server 2010 Accounts.
I know this has been closed for awhile, but I need to fix this ASAP. I had the "Manage Accounts" while I was on XP, but they upgraded me to Windows 7 and now it is gone. -
N8 angry birds full version now available
alot was asking for this now the full version is available for the N8
http://store.ovi.com/content/61009?clickSource=search
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520shashankbalaji wrote:
How is it that the full version is available for free for Android phones and not for nokia n8?
it's just how the developers decide to price it.
It was a similar situation with the N900 and iPhone, £1.50 on the N900 and £0.59p on the iPhone
Also, the Android version is Ad supported which is why it's free
If this Post is helpful. A click on the White Kudos star is always Appreciated
Last Nokia: Nokia Lumia 800
Current Phone: A Non Nokia Device
Previous Phones:Don't Ask ;-) -
hi., i bought a 8GB ipod touch for $199 on September 2nd.. but apple has announced that 16GB ipod will be now available at the same price.. is it possible for me to exchange my 8GB to a 16GB one..??
If you purchased it within the last 14 days you can return it for a full refund and then purchase the 5G.
-
I wish to re attach my device to my iTunes account but I do not appear to have the manage devices option - someone please help
If you want to add it then you need to do one of the 3 things mentioned on that page e.g. use iTunes Match on your iPad, use automatic downloads on it, or redownload one of your past purchases. I think that the 'manage devices' section will only show when you have one or more devices/computers associated to your account, if you don't have any associated then it won't appear.
-
OS 10.3.1.1016 Now Available for the AT&T BlackBerry Passport
http://nerdberry.net/2014/10/30/os-10-3-1-1016-now-available-for-the-att-blackberry-passport/
so, what is this ...? does anyone have any knowledge about this firmware ?? & especially, does it have flash ??? & what else ????
10.3.1 SW .1779 OS .2726 WLAN .1.1 Radio .2727Not really sure about that. Can't really recommend anything since its not the official software.
You can read more about it here if you want to check out some more information:
http://crackberry.com/blackberry-os-10311154-autoloaders-all-blackberry-10-devices-available
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music! -
In one screen all the Maintenance Process Option
Hi Friends
The Customer required the maintenance Process like thier Logbook , whcih has Employess, shift , Timings, Operationos, Consumables, Breakdown, Next communications in One screen.
Looking into this i could go for notifications for technical issues (IW21), IW31 for Order and IW42 for completion. Out of these there is no HR management to record the employees data.Let me know how could i combine these all t codes in one screen.
Thier log book visualising the total consumables and its cost..With out the BW module iam not able to provide the reports of breakdown in analysis(graphs) . I cant do the SMS after notification without the Workflow. Is SMS possible by ABAP programme+s014 t code? another thing is without HR management how could i work for employees data what the way charecteristics help? The option of making shift is huge task. We tried and added thro exit at Order screen. But its not pretty
I hope your suggestion makes me some comfortPlease cross-reference your posts: http://www.sapfans.com/forums/viewtopic.php?f=7&t=329934
-
Adobe Revel 1.0 is now available on the Google Play Store!
We are pleased to announce that Adobe Revel 1.0 is now available on Google Play Store!
Revel for Android phones (4.0 & above)
Features include
Favorites and Activity View
Editing
Commenting & Favoriting
Subscription through adoberevel.com
Auto Import
Download
Video and photo support
Sharing on 3rd party apps through Android Share intent
Print to Walgreen
You can download Adobe Revel from the Google Play Store at https://play.google.com/store/apps/details?id=com.adobe.revelHi,
In previous versions i had no problems but with the new 11.1.1.1.0 version i can not get updates. If i go to Help -> Check for Updates and click next i get an error that JDev can not connect to the Internet. If i click cancel the details link shows the following error stack:
java.net.UnknownHostException: www.oracle.com
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:177)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:519)
at java.net.Socket.connect(Socket.java:469)
at sun.net.NetworkClient.doConnect(NetworkClient.java:163)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:394)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:529)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:233)
at sun.net.www.http.HttpClient.New(HttpClient.java:306)
at sun.net.www.http.HttpClient.New(HttpClient.java:323)
at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(HttpURLConnection.java:837)
at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:778)
at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:703)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:1026)
at oracle.ideimpl.webupdate.CheckMasterListRunnable.run(CheckMasterListRunnable.java:147)
at java.lang.Thread.run(Thread.java:619)
All other internet traffic is no problem and the previous jdev release can connect without a problem. If i add www.oracle.com to my /etc/hosts file i does work but then i can not login to otn in the next steps. Any ideas?
Kind regards,
Andre Jochems -
Mobile version now available via WidSets
Hi all,
I am happy to tell you that we recently joined forces with the Nokia WidSets team to create a "widget" for Nokia Support Discussions.
With WidSets, you can get your favorite web content straight to your mobile device. WidSets works on over 300 phone models from all manufacturers. Using WidSets is free of charge apart from any data traffic charges by your operator.
The Discussions widget is basically a light, mobile version of Nokia Support Discussions. Although the boards work pretty well with device browsers, the pages can be quite heavy to load and there's a lot of data traffic. The widget only downloads the texts, making the experience very fast and user-friendly on most mobile devices.
The new widget lets you search and read messages posted by Nokia users on this global discussion board, which is available via several Nokia websites around the world. There are almost 250 000 posts in 40 000 different topics, so you won't run out of things to read.
Note that you won't be able to login or make posts, but you can search and read all posts.
The widget was created by utilizing the board software's API interface. This enabled us to create an elaborate and feature-rich widget that aligns very nicely with the online version of the service.
If you haven't yet discovered the fascinating world of WidSets, you can start by visiting
www.widsets.com
If you already have installed WidSets, just add the Nokia Support Discussions widget from
http://www.widsets.com/widget/227607834
I wrote all my posts from 2005-2011 as an "Admin" for this community. I still work for Nokia as an external consultant, so my rank in all posts is now "Employee".Hi dani2xll,
thanks for that, excellent question. I agree it's not that easy to distinguish between widsets, widgets and gadgets.
The new mobile version of Nokia Support Discussions is indeed based on the java launcher of WidSets.com. The WidSets applications - they're called "widgets" - work on over 300 phone models from all manufacturers. You need to register at WidSets.com before you can add any of the thousands of widgets that are available.
The .wgz applications - apparently they're also called "widgets" - you mentioned are a similar but newer thing. Theyre based on WRT (web run time) technology, which is currently supported by N95, E90, N82 and N78 (N95 and E90 may require the latest sw update for this.) These WRT widgets can be run independently, straight from the device desktop.
And yes, we are certainly looking into the possibility of getting Discussions to work also via a WRT widget on all compatible phones.
(And if it was up to us in the Nokia Support Discussions team, such a widget would naturally be preinstalled in every compatible device )
edit: and with gadgets, I don't mean physical products but applications that run on a Vista or a Mac desktop or Igoogle. Stay tuned - more news about gadgets in the next few days!
Message Edited by vandelay on 06-Jun-2008 02:20 PM
I wrote all my posts from 2005-2011 as an "Admin" for this community. I still work for Nokia as an external consultant, so my rank in all posts is now "Employee".
Maybe you are looking for
-
Smartview 11.1.2.2.300 Essbase Server & APS Compatibility
We want to add LRO's to data cells, but we can't get it working. As stated in the thread title, we use Smartview 11.1.2.2.300 and Essbase Server 11.1.2.1.00. The core of the problem is that the 'Linked objects' button in the Essbase-ribbon in Excel c
-
Smart Card based ssl connection not possible with SunPKCS11 Provider?
Dear all We use jsse connections with file based Pkcs12 Keystores for longer time. Now we d'like to replace these .p12 files with SmartCards. While the jsse 5 reference guide suggests: "To use a Smartcard as a keystore or trust store, set the javax.n
-
Why Download does not start for Mavericks in app store ?!?!
I tries many times to download MAvericks OS from app-store but after clicking "free uograde" it turned to green "instal app" button and then nothing... I surrently use Mac OS 10.6.8.
-
Hi, I've set up a pair of switches in a DMZ type environment that hangs off of our DMZ firewall. The firewall has a static route to the supernet hosted on the switches via switch interface 10.1.191.12 The static route is: 10.1.160.0 /19 via 10.1
-
Iphoto won't open/tried to manipulate photos outside of iPhoto
Help! I didn't realize that you shouldn't manipulate photos in and out of folders on the desktop apart from iPhoto. Now iPhoto won't open! Does anyone know what I can do? I'm getting ready to be married, leaving the country on Wed!! Can anyone help a