Vertical Alignment Issue

I have a problem. I've browsed through existing solutions and
haven't found anything that works for me.
I am working on a site that has lots of nested tables. The
navigation bar and some other text are in a column on the left (in
a nested table) and the page content is in a table on the right (in
a nested table). However, the image and text in the left column
continue to migrate down whenever I add too much content in the
right column.
This happens only on page where the height of the content in
the right column exceeds the height of the content in the left.
ALL properties for all tables have the vertical alignment set
to "top" not to "default". Any help would be greatly appreciated. I
am attaching the code for my style.css file.
The page in question is located at
http://www.ssc.coop/science/news.html.
Thank you in advance ... Amy
Text

Yes. I stand corrected. Thanks Murray.
valign="top" is the correct HTML syntax. valign:top is some
invalid hybrid
of HTML & CSS. Regardless, it can't/won't/doesn't work.
Walt
"Murray *ACE*" <[email protected]> wrote
in message
news:[email protected]...
> Actually valign:top is nothing. But it's certainly
invalid!
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.dreamweavermx-templates.com
- Template Triage!
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
> ==================
>
>
> "Walt F. Schaefer" <[email protected]> wrote
in message
> news:[email protected]...
>>> valign: top;
>>
>> This is invalid CSS. It is HTML. Yu can't use HTML
code in CSS. Change it
>> to vertical-align: top;
>>
>> Walt
>>
>> "AGrover" <[email protected]> wrote
in message
>> news:[email protected]...
>>>I have a problem. I've browsed through existing
solutions and haven't
>>>found
>>> anything that works for me.
>>>
>>> I am working on a site that has lots of nested
tables. The navigation
>>> bar and
>>> some other text are in a column on the left (in
a nested table) and the
>>> page
>>> content is in a table on the right (in a nested
table). However, the
>>> image and
>>> text in the left column continue to migrate down
whenever I add too much
>>> content in the right column.
>>>
>>> This happens only on page where the height of
the content in the right
>>> column
>>> exceeds the height of the content in the left.
>>>
>>> ALL properties for all tables have the vertical
alignment set to "top"
>>> not to
>>> "default". Any help would be greatly
appreciated. I am attaching the
>>> code for
>>> my style.css file.
>>>
>>> The page in question is located at
>>>
http://www.ssc.coop/science/news.html.
>>>
>>> Thank you in advance ... Amy
>>>
>>>
Text
>>>
>>> td {text-align: left;
>>> valign: top;
>>> font-family:tahoma;
>>> font-size:10px;
>>> color:#919191;
>>> line-height:13px;}
>>>
>>> a {text-decoration:underline;
>>> color:#298EAA;}
>>>
>>> body { margin:0px;padding:0px;}
>>>
>>> ul {margin:0; padding:0; list-style:none}
>>> li {background:url(images/a.gif) center left
no-repeat; margin:0 0 0
>>> 0px;
>>> padding:0 0 0 10px; line-height:16px }
>>> li a { color:#54A5BB}
>>>
>>> .usa span { color:#298EAA}
>>> .copy { color:#BABABA}
>>> .copy a { color:#BABABA; text-decoration:none}
>>> .copy a:hover {text-decoration:underline}
>>> .education { color:#757575}
>>> .team span { color:#54A5BB}
>>> .privacy a { color:#54A5BB}
>>>
>>> .white {color:#ffffff; text-decoration:none}
>>> .arrow_right { margin-right:6px;}
>>>
>>> .form { width:205px;
>>> height:29px;
>>> font-family:tahoma;
>>> font-size:10px;
>>> border-style: solid;
>>> border-width: 1px;
>>> border-color:#9E9E9E;
>>> background-color:#ffffff;
>>> color:#919191;
>>> margin-left:0px;
>>> margin-right:0px;
>>> padding-top:8px;
>>> padding-left:8px;}
>>>
>>> .textarea { width:190px;
>>> height:119px;
>>> font-family:tahoma;
>>> font-size:10px;
>>> border-style: solid;
>>> border-width: 1px;
>>> border-color:#9E9E9E;
>>> background-color:#ffffff;
>>> color:#919191;
>>> margin-left:0px;
>>> margin-right:0px;
>>> padding-top:8px;
>>> padding-left:8px;}
>>>
>>> a:hover{text-decoration:none;}
>>> .a:hover{text-decoration:underline;}
>>>
>>
>>
>
>

Similar Messages

  • Vertical Alignment issue in Safari

    I have an issue in Safari displaying content of a table cell as if it's middle aligned and not vertically aligned. It works fine in IE and FF, but not in Safari.
    I am using a basic CSS setting for the table cell with vertical-align=top. I have also put in in the td tag valign=top and still have the problem where the content is middle aligned and not top aligned.
    Has anyone seen something like this and know what I can do to get it to work?

    Do you have a sample or a screenshot that illustrates this?
    Check out the Safari Developer's forum for more help; this is mainly used by people who are Users of Safari vs. Web Developers (who should know the difference between browsers).

  • Keynote on Ipad warning: custom and mixed lists may look different... bulleted list have bullet vertical alignment "issues" any fixes?

    Help.
    I am working on a high-end Keynote presentation. It was originally a poerpoint file, that I opened in keynote. So far so good. I applied keynote themes, and used bullets etc, looks great on the mac. Move it to the ipad, and the top bullet looks fine, all 1st level bullets below it have a higher vertical alignment, which no longer in alignment with the text. What am I doing to cause this? all spacing etc, is exactly the same.
    anybody know a tip or trick to keep this from happening?

    I answered my own question... with many, many tests.
    I FINALLY figured out what the common feature was, that was causing the misalignment of the bullets.
    Line spacing.
    If you apply line spacing BEFORE a paragraph, it misaligns the bullets... which is WHY it wasn't happening to the 1st bullet in each text box, but only those following....
    In the final test I changed the line spacing attribute to AFTER a paragraph, and VOILA! no more misaligned bullets.
    It's definitely a bug in the software, since either way it looks fine on the mac, and is only a problem on the iPad.
    hope that saves someone else some valuable time!!!

  • Table content vertical alignment issue in Dreamweaver cs4

    Hello,
    I can't figure this one out. I made a sample file (code below) to debug my problem.
    I have a table inside a table. Both have no cell padding or spacing and top alignment, yet, the text appears to the top but there's a gap between the top of the cell and the text. Has anyone had that problem ? Same issue when I place a picture in the table, even if the pictute is 100px X 100px and the table size the same, there still is a gab between the picture and the top of the table ???
    Many thanks,
    <body>
    <table width="500" border="0" cellspacing="0">
      <tr>
        <td valign="top" bgcolor="#00FF00">Test</td>
      </tr>
      <tr>
        <td valign="top"><table width="100%" border="0" cellspacing="0" cellpadding="0">
          <tr>
            <td valign="top"><p>This text is in a table inside the first table</p>
              <p>Both tables have no cellspacing and no cellpadding yet the text is not entirely aligned to the top of the cell/table !</p></td>
          </tr>
        </table></td>
      </tr>
    </table>
    </body>

    See this live example of a basic table.
    http://alt-web.com/DEMOS/basic-table.html
    Content in table cells is effected by heading and paragraph styles.
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    http://alt-web.com/
    http://twitter.com/altweb

  • Solution to JLabel Vertical Alignment Issue

    I spent the last hour messing with all the alignment properties on a JLabel. None seemed to get rid of the small gap above the text in the JLabel. So here is what does work:
    JLabel label = new JLabel();
    label.setBorder(BorderFactory.createEmptyBorder(-2, 0, 0, 0));
    You can make the negative number higher to move the text further up.
    Hopefully this saves someone else some time.
    Dan

    I spent the last hour messing with all the alignment properties on a JLabel. None seemed to get rid of the small gap above the text in the JLabel. So here is what does work:
    JLabel label = new JLabel();
    label.setBorder(BorderFactory.createEmptyBorder(-2, 0, 0, 0));
    You can make the negative number higher to move the text further up.
    Hopefully this saves someone else some time.
    Dan

  • Form Alignment issue in table: Custom submit button

    Yesterday as I was putting together a "check availability"
    form within a horizontal table, I ran into difficulties getting the
    form to vertically align in the middle, it kept aligning to the
    top. I was able to correct the problem using the following CSS:
    <style>
    form {
    display:inline;
    </style>
    Now this morning I was switching the generic "submit" button
    with a custom gif button using this code within the form:
    <input type="image" name="submit" src="image.jpg"
    width="110" height="20">
    This worked fine, but every part of the form is aligning to
    the middle correctly except the custom button which is sticking to
    the top. I'm completely lost on how to resolve this issue. If
    anyone has any information on how I can fix the button to align
    with the rest of the form I would greatly appreciate your help. I
    am a beginner at adjusting code.
    Thank you so very much!

    Hello Ram,
    > No custom coding.
    The current forum is for developers. That's why I'd recommend asking non-programming questions in the
    Using SharePoint Designer, InfoPath and Other Customizations forum instead.

  • More alignment issues

    hi,
    I'm hardly an expert - but I have made great strides because of helpful people who throw me a hint.
    my site: www.kirarmerica.com
    I still have JUST a FEW alignment issues.  I like to have everything centered, so now I am just down to my spec sheets.
    I know that they might not be configured ALL the same, but I am hoping I can change a few things
    please look at Kira America | Products
    click on any spec sheet and you will see that the headers menu and sometimes the footer stays centered, but the spec info jumps to the  left of the page.
    I've found the correct .css to edit.  but I cant quite figure out how to align the columns vertically on the page.
    for example if I put a margin on #right_column it put it in the right spot, but then the rest of the content jumps all over the page.
    any hints would be helpful!

    These changes will center content in white area
    #container h1, #container h2, #container h3, #container h4, #container h5, #container h6 {
        border-bottom: 1px solid #DEDACB;
        padding-bottom: 8px;
        text-align: center;
    .excel214 {
        border: medium none;
        color: #000000;
        font-family: Calibri,sans-serif;
        font-size: 11pt;
        font-style: normal;
        font-weight: 400;
        margin-left: auto;
        margin-right: auto;
        padding-left: 1px;
        padding-right: 1px;
        padding-top: 1px;
        text-decoration: none;
        vertical-align: bottom;
        white-space: nowrap;

  • VERTICAL ALIGNMENT ON WORD TABLE IS MISS.

    Hello everybody,
    Can somebody clear my mind? I did the code below, and this generates a beautiful and clean table on word 2010. The problem is that the instruction “.Rows.Height = 8” and 
    “.Cells.VerticalAlignment = Word.WdCellVerticalAlignment.wdCellAlignVerticalCenter” seems
     not work, besides, when I try to adjust the rows height and vertical alignment by myself, after routine generates the table of course, Word don´t allow me to do these adjustment by hand.
    The property “.Rows.Height = 8” seems to be working, because when I change to “.Rows.Height = 25” the rows height really goes to it, also, there is no problem with horizontal alignment, this is work very fine.
    Working with VS 2012 and Word 2010.
    Tried everything, no result….
    Thank you.
    Private Sub Button6_Click(sender As Object, e As EventArgs) Handles Button6.Click
    Dim WA As New Word.Application
    Dim WD As Word.Document
    Dim WS As Word.Selection
    Dim model_address, mes_extenso, texto, texto_ref, pic_address As String
    model_address = Application.StartupPath & "\GTMS_MDL.docx"
    pic_address = Application.StartupPath & "\PIC\TABELA01.png"
    WD = WA.Documents.Open(model_address, [ReadOnly]:=True)
    WS = WA.Selection
    Dim WT1 As Word.Table
    Dim WR1 As Word.Range
    Dim lin_wt1, lin_wt2, lin_wt3 As Integer
    lin_wt1 = 3
    WT1 = WD.Tables.Add(WA.Selection.Range, lin_wt1 + 2, 5)
    With WT1.Range
    .ParagraphFormat.Alignment = Word.WdParagraphAlignment.wdAlignParagraphCenter
    .Cells.VerticalAlignment = Word.WdCellVerticalAlignment.wdCellAlignVerticalBottom
    .Rows.Shading.BackgroundPatternColor = Word.WdColor.wdColorAqua
    .Rows(1).Shading.BackgroundPatternColor = Word.WdColor.wdColorBlueGray
    .Rows.Borders.OutsideLineStyle = Word.WdLineStyle.wdLineStyleSingle
    .Columns.Borders.InsideLineStyle = Word.WdLineStyle.wdLineStyleSingle
    .Font.Bold = True
    .Font.ColorIndex = Word.WdColorIndex.wdWhite
    .Rows.Height = 8
    .Columns(1).Width = 30
    .Columns(2).Width = 350
    .Columns(3).Width = 40
    .Columns(4).Width = 50
    .Columns(5).Width = 50
    .Font.Size = 7
    End With
    WT1.Range.Text = ""
    WT1.Cell(1, 1).Range.Text = "ITEM"
    WT1.Cell(1, 2).Range.Text = "DESCRIÇÃO"
    WT1.Cell(1, 3).Range.Text = "QTD."
    WT1.Cell(1, 4).Range.Text = "UNIT."
    WT1.Cell(1, 5).Range.Text = "SUBTOTAL"
    For i = 0 To lin_wt1
    WT1.Cell(i + 1, 2).Range.ParagraphFormat.Alignment = Word.WdParagraphAlignment.wdAlignParagraphLeft
    Next
    For i = 0 To lin_wt1 - 1
    WT1.Cell(i + 2, 1).Range.Text = i + 1
    WT1.Cell(i + 2, 2).Range.Text = DGV1.Rows(i).Cells(2).Value
    WT1.Cell(i + 2, 3).Range.Text = DGV1.Rows(i).Cells(3).Value
    WT1.Cell(i + 2, 4).Range.Text = DGV1.Rows(i).Cells(4).Value
    WT1.Rows(i + 2).Range.Font.ColorIndex = Word.WdColorIndex.wdBlack
    WT1.Rows(i + 2).Range.Font.Bold = False
    Next
    WT1.Cell(lin_wt1 + 2, 1).Merge(WT1.Cell(lin_wt1 + 2, 2))
    WT1.Cell(lin_wt1 + 2, 2).Merge(WT1.Cell(lin_wt1 + 2, 4))
    WT1.Cell(lin_wt1 + 2, 1).Range.Text = "TOTAL GERAL"
    WT1.Rows(lin_wt1 + 2).Range.Font.ColorIndex = Word.WdColorIndex.wdDarkRed
    WT1.Rows(lin_wt1 + 2).Range.Font.Size = 10
    WT1.Cell(lin_wt1 + 2, 1).Range.ParagraphFormat.Alignment = Word.WdParagraphAlignment.wdAlignParagraphLeft
    WT1.Cell(lin_wt1 + 2, 2).Range.ParagraphFormat.Alignment = Word.WdParagraphAlignment.wdAlignParagraphCenter
    WT1.Cell(lin_wt1 + 2, 2).Range.Text = FormatCurrency(12560, 2)
    WA.Visible = True
    WA = Nothing
    WD = Nothing
    WS = Nothing
    End Sub

    Hi,
    >>The problem is that the instruction “.Rows.Height = 8” and 
    “.Cells.VerticalAlignment = Word.WdCellVerticalAlignment.wdCellAlignVerticalCenter” seems
     not work, besides, when I try to adjust the rows height and vertical alignment by myself, after routine generates the table of course, Word don´t allow me to do these adjustment by hand.
    The property “.Rows.Height = 8” seems to be working, because when I change to “.Rows.Height = 25” the rows height really goes to it, also, there is no problem with horizontal alignment, this is work very fine<<
    I am not able to understand the issue exactly. Can you set the height for the rows using Rows.Height? I made a quick test using VBA based on the code above, it works well for me. And I can also adjust by hand after run the code.
    >> “.Cells.VerticalAlignment = Word.WdCellVerticalAlignment.wdCellAlignVerticalCenter” seems
     not work<<
    What effect did you want to achieve? Based on the code samlpe you were setting the verical alignment to bottom however the description are center. Both center and bottom for the vertical alignment works well for me.
    I would suggest that you test the code using a new document to see whether the issue is realtive to the specific document. Here is the test code in VBA for your reference:
    Sub test()
    Dim WA As New Word.Application
    WA.Visible = True
    Dim WD As Word.Document
    Dim WS As Word.Selection
    Dim model_address, mes_extenso, texto, texto_ref, pic_address As String
    'model_address = Application.StartupPath & "\GTMS_MDL.docx"
    model_address = "C:\doc1.docx"
    'pic_address = Word.Application.StartupPath & "\PIC\TABELA01.png"
    Set WD = WA.Documents.Open(model_address, ReadOnly:=True)
    Set WS = WA.Selection
    Dim WT1 As Word.Table
    Dim WR1 As Word.Range
    Dim lin_wt1, lin_wt2, lin_wt3 As Integer
    lin_wt1 = 3
    Set WT1 = WD.Tables.Add(WA.Selection.Range, lin_wt1 + 2, 5)
    With WT1.Range
    .ParagraphFormat.Alignment = Word.WdParagraphAlignment.wdAlignParagraphCenter
    .Cells.VerticalAlignment = Word.WdCellVerticalAlignment.wdCellAlignVerticalCenter
    .Rows.Shading.BackgroundPatternColor = Word.WdColor.wdColorAqua
    .Rows(1).Shading.BackgroundPatternColor = Word.WdColor.wdColorBlueGray
    .Rows.Borders.OutsideLineStyle = Word.WdLineStyle.wdLineStyleSingle
    .Columns.Borders.InsideLineStyle = Word.WdLineStyle.wdLineStyleSingle
    .Font.Bold = True
    .Font.ColorIndex = Word.WdColorIndex.wdWhite
    .Rows.Height = 8
    .Columns(1).Width = 30
    .Columns(2).Width = 350
    .Columns(3).Width = 40
    .Columns(4).Width = 50
    .Columns(5).Width = 50
    .Font.Size = 7
    End With
    WT1.Range.Text = ""
    WT1.Cell(1, 1).Range.Text = "ITEM"
    WT1.Cell(1, 2).Range.Text = "DESCRI??O"
    WT1.Cell(1, 3).Range.Text = "QTD."
    WT1.Cell(1, 4).Range.Text = "UNIT."
    WT1.Cell(1, 5).Range.Text = "SUBTOTAL"
    For i = 0 To lin_wt1
    WT1.Cell(i + 1, 2).Range.ParagraphFormat.Alignment = Word.WdParagraphAlignment.wdAlignParagraphLeft
    Next
    For i = 0 To lin_wt1 - 1
    WT1.Cell(i + 2, 1).Range.Text = i + 1
    WT1.Cell(i + 2, 2).Range.Text = "a" 'DGV1.Rows(i).Cells(2).Value
    WT1.Cell(i + 2, 3).Range.Text = "b" 'DGV1.Rows(i).Cells(3).Value
    WT1.Cell(i + 2, 4).Range.Text = "c" 'DGV1.Rows(i).Cells(4).Value
    WT1.Rows(i + 2).Range.Font.ColorIndex = Word.WdColorIndex.wdBlack
    WT1.Rows(i + 2).Range.Font.Bold = False
    Next
    WT1.Cell(lin_wt1 + 2, 1).Merge WT1.Cell(lin_wt1 + 2, 2)
    WT1.Cell(lin_wt1 + 2, 2).Merge WT1.Cell(lin_wt1 + 2, 4)
    WT1.Cell(lin_wt1 + 2, 1).Range.Text = "TOTAL GERAL"
    WT1.Rows(lin_wt1 + 2).Range.Font.ColorIndex = Word.WdColorIndex.wdDarkRed
    WT1.Rows(lin_wt1 + 2).Range.Font.Size = 10
    WT1.Cell(lin_wt1 + 2, 1).Range.ParagraphFormat.Alignment = Word.WdParagraphAlignment.wdAlignParagraphLeft
    WT1.Cell(lin_wt1 + 2, 2).Range.ParagraphFormat.Alignment = Word.WdParagraphAlignment.wdAlignParagraphCenter
    WT1.Cell(lin_wt1 + 2, 2).Range.Text = FormatCurrency(12560, 2)
    WA.Visible = True
    Set WA = Nothing
    Set WD = Nothing
    Set WS = Nothing
    End Sub
    Hope it is helpful.
    Regards & Fei
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Vertical alignment in text form

    Been trying set vertical alignment so that text will align with the top of the form box, and having a frustrating result. It will only align if the box is one line only.
    A multi-line box will not expand vertically to accomodate long text; an expanded (vertically) box will result in text beginning below top alignment. Anyone working on a fix for this? It seems to be a new problem, as I have used this feature with in the past with old versions of Acrobat.

    If I understand your issue correctly, you can achieve this by playing witht the Left and Right values under Layout tab of the object properties.
    Let me know if this is not what youare looking for..
    Thanks
    Srini

  • SAP script printout alignment issue

    Hi Experts,
    I have facing one Script Printout Alignment issue.
    SAP Script Form printing some Values in Table format.
    While debugging( in debug mode ), I am getting the correct Alignment ( Proper table format with values ).
    But in printout the Alignment( The vertical and horizontal lines are not printed properly ) is not correct.
    Thanks in Advance.

    HI Glen Anthony,
    I am not using any printer details.
    from the Spol (SP01) I am checking the print priview.
    Success in debug mode but not in Print.
    Please suggest.
    Thanks

  • FormItem Vertical Alignment

    I have a custom skin for a TextInput that's inside a FormItem, and they don't align vertically.  The skin is fairly basic, and even has a fixed height.  I've dug through the FormItem and FormItemSkin trying to figure out how to fix this, but haven't gotten anywhere in about two hours.  Even setting verticalCenter=0 on all the FormItemSkin elements still left everything out of place.  Any suggestions on how to deal with alignment issues?
    I've made a demo showing my skin.  It's view source enabled: http://dl.dropbox.com/u/15760/bin-release/index.html
    Thanks

    Jason,
    Not sure whether this is still useful to you but it may be useful to anyone else who comes across this thread.
    I came across the same problem and the way I resolved it was by slightly modifying the "Standard" report template:
    1. Under Shared Components pick "Templates"
    2. Choose the report template you want to change (I use Standard for printing and Alternating Row Colours for everything else, but that's purely a matter of taste).
    3. Under "Column Templates" on the edit page you should see something like <td#ALIGNMENT#...
    4. Remove the #ALIGNMENT# tag and replace it with valign="top".
    I suppose you could create a new report template and use that instead, depending on your requirements across your app.
    This is (admittedly) a bit of a hack, I suppose the best way of doing this would be to find where the #ALIGNMENT# tag is set and change it there but at least my way you can apply it at template level rather than across the whole app.
    Regards,
    Matt

  • Alignement issue when exporting to PDF

    Hello,
    I'm having some alignment issues when exporting an InDesign file to PDF.
    I have a couple of square pictures, touching eachother at the edges. These are aligned bang on in InDesign (the lines overlap), but when exporting to a PDF and viewing in there, it seems that some seem to jump up slightly.
    Is this just a display issue or a setting issue when exporting to PDF?
    Thanks
    Benny

    The detail is cropped too tight for me to tell how many photos are intersecting there. Is there a vertical intersection as well? If not, I think you're looking at a very slightly non-rectangular frame, if there is, then you might still be looking at a non-rectangular frame, or the frames are not perfectly aligned, which doesn't surprise me if you snapped to a guide -- I find that less than 100% reliable since CS6.
    Presuming that you've zoomed in to show us the problem, that's probably a single pixel misalignment and you'd be very hard pressed to see it in printed output without a loupe.
    You can check the bottom edge of the top photo, and the top edge of the bottom photo(s) for being out of horizontal by using the direct select tool to select the corner points and seeing if the y-coordinate is the same on both sides of the frame.
    My printer tell me to always overlap frames, rather than butting them, for trapping, for what that's worth, but I don't always do what he says, and I've never had a problem.

  • Losing table vertical alignment when converting ditamap to book

    FrameMaker Version: 12.0.4.445 (latest, part of TCS5)
    I have a structured project, where several XML files have been arranged into a ditamap.
    For one of the XML files, I have a table, where I need to set Cell Vertical Alignment of the cells to MIDDLE.
    So using Paragraph Designer > Table Cell, I change the entries from Top to Middle (The defaults were Top).
    With the ditamap pane selected, I then go File menu >> Save Ditamap As
    I save the ditamap as "Book 12.0 with fm components (*.book)" file type.
    In the resulting book, the XML files are now .FM files.
    However, at this point, when I open the .FM file that has the table, the cell styles have reverted to TOP.
    I've searched high-and-low for a similar issue. This is looking like a bug to me, but can someone confirm?
    Thanks

    (Perhaps the moderator should move this to the FrameMaker Integration discussion (under RoboHelp).
    I've determined the correct settings for my purposes, that being vertical alignment in a FM-to-RH integration project. I originally thought it was specifically a FrameMaker issue, though the solution also involves settings in RoboHelp. Here are my findings:
    1. For the selected FM table, note its Table Tag in the Table Designer (e.g., FormatA). This will be used later.
    2. If there is table Entry > Image element, then select the Image element, and set its placement attribute = inline.
    Though inline is supposed to be the default, I found it necessary to state explicitly in order to control alignment of image within a RH table cell.
    3. Moving on from FM, in the CSS file that you are using with your RH project, suppose that you have defined your table as follows. Note that I'm using "CenterMiddle" as the title.
    table.CenterMiddle {
      width: 100% ! important ;  /* This forces the RH table to autofit the window */
      text-align: Center;
      font-family: "Adobe Garamond Pro";
      border-left-style: Solid;
      border-left-width: 1px;
      border-left-color: #000000;
      border-right-style: Solid;
      border-right-width: 1px;
      border-right-color: #000000;
      border-top-style: Solid;
      border-top-width: 1px;
      border-top-color: #000000;
      border-bottom-style: Solid;
      border-bottom-width: 1px;
      border-bottom-color: #000000;
    .CenterMiddle td {
      vertical-align: middle ! important ;  /* This forces the individual cells to align vertically */
      border-color: #000000;
      border-style: solid;
      border-width: 1px;
    4. Go to the RH project to which the FM project is linked.
    5. Go File menu > Project Settings.
    6. In the FrameMaker Document group, click Edit.
    7. Under FrameMaker Settings, locate the Table style that you noted in step (1), and set it to the name of your table from (3).
    At this point, you can update all the FM components in your RH project, and compile the RH project to get the desired results. In my case, I needed both text and images in the table cells to have vertical alignment = middle.

  • Awt alignment issue with japanese character

    I am using japesenes OS(Win XP ) and running awt application (JDK1.6).
    For Choice box (dropdown box) ,if the font is less than 15 and if there
    is a mixture of japanese and number ,the numbers and the Japanese characters
    are not vertically aligned.
    I am using java.awt.Choice component to display all the months
    Choice month =new Choice();
    month.insert ("1 \u6708", 0);
    month.insert ("2 \u6708", 1);
    month.insert ("3 \u6708", 2); .. so on
    While running the applet , in display window
    The numbers and the Japanese characters are not vertically aligned.
    When a month is selected, it is slightly truncated at the top.
    My default font is [family=SansSerif,name=sansserif,style=plain,size=12]
    when i change the font to 15,the characters are properly aligned.
    Did anyone faced this before? if so can you please clarify why this behaviour when font size
    is less than 15 or how to resolve this issue without changing the font size .
    thanks in advance,
    ruhul

    Hi,
    I have also faced the above mentioned issue.The workaround of using Full Width unicode though resolves the alignment of Japanese with english/numbers/special characters.
    There is other issues with this to mention a few:
    (a) The text is still top aligned.
    (b) A leading and trailing space is added to the value in the choice component when full width unicode value is used instead of english/number/special characters.
    It would nice if the mentioned issues could be resolved or if a work around could be suggested.

  • T400's Vertical line issue

    I'm not sure how Lenovo doesn't have recalls yet but in our company we have T430's T440's and T450's that have a vertical line on the LCD screen. Almost everyday we have 1-2 laptops with this issue. What's even worse is we purchased some T440p's last year and for some reason they were only under warranty for a year and not 3 years and now one of the laptops T440p ran out of warranty as of 7/20/2015 and it's having this Vertical line issue. What is one suppose to do in a situation like this? It's fairly a new computer. We've had this issue on brand new machines out of the box. How is lenovo not getting sued for this problem?

    Hai Deep,
    Use Elements as suggested by Kodarapu.
    Now goto Paragraph Formats create a format for Item lines.
    ex.
    Name Paragraph Format as 'IL' Now click on the Push Button "Tabs" on bottom Right.
    now in "Tab Position" enter the spacing that you need for your item dispaly
    ex.
    Number     Tab position       Alignment
    1               6.00   CH          LEFT
    2               25.00  CH         LEFT
    3               54.00  CH         LEFT
    The above example is for 3 items
    Now in your Script Windows-> Main
    do the following.
    /E           ITEM_LINE_A
    IL           &EKPO-EBELP&,,&EKPO-EMATN&,,,,&EKPO-TXZ01&
    Hope it SOlves your Issue.
    Cheers,
    Suvendu

Maybe you are looking for

  • VMWare issue?

    I have been running a MacBook Pro with OSX 10.5.8. I needed to use it with Windows XP (SP2) running an old Risograph RP 3700 printer through a USB to RISO PARALLEL PORT cable (called Prolific Technology Inc IEEE 1284 Controller) running under the VMW

  • Opening a file using Webutil_Host.Host Command

    Dear Gurus I'm trying to open a file using following command behind a button on my form: Webutil_Host.Host('x:\03\03\39920000023.gif'); I expected from this command to open the given gif file in default image viewer but it takes no action when I pres

  • How to Transfer vids to Phone without Bluetooth or...

    How to Transfer vids to Phone without Bluetooth or Connector?? Don't tell me to go buy a connector and don't ask me why not. I just want to know how to do it without those two.

  • IPad apps crash after installing iOS 4.2

    After i installed iOS 4.2 almost any app crashes after a few minutes to the home screen and changes arent saved yet. Some apps handle it a bit longer, some crash right after a minute or so. Any idea why or what to do?

  • NullPointerException on wdContext.nodeMyNode().getElementAt(i)

    This is a strange one... The following loop throws a NullPointerException : <br>    int size = wdContext.nodeZoneList().size(); // size is 42...    for (int i = 0; i < size; i++)       // the following throws a NullPointerException when i == 0 !!