Vertical axis scaling problem with XYZ bar/line chart

Post Author: satwar
CA Forum: WebIntelligence Reporting
Is there a trick to making the scaling on the
Z-axis equal to the Y-axis. I don't want to specify the scaling on
either axis because I am generating report with filtered "dimensons" in
order to generate all measure charts for a given set of filters. The
measures have various value ranges so by not specifying chart scales,
the Y-axis is auto ranged, which is good, but so is the Z-axis, which
is bad. I want both Y & Z axis to range together so I get a good
visual comparison of the two measures being plotted.

Post Author: jsanzone
CA Forum: WebIntelligence Reporting
satwar,
There is no "trick", we're just victims of the limitation that WebI has in portraying XYZ type charts to our better liking.  I submitted a request to Business Objects Tech Support in Oct 2006 and became the proud holder of two ADAPTs:
ADAPT00676587 u2013 for the scaling issueADAPT00676609 u2013 for the stacked bar chart, line graph issue
When fully implemented, the scaling for Y and Z should be able to correspond to each other.  For instance, max value of Y and max value of Z will set on both scales the same max value.  I don't discourage you from submitting a trouble-ticket, perhaps if they get more noise on this situation they'll resolve my (our) ADPAT sooner, but just hoping....

Similar Messages

  • Problem with Table control lines

    Hi Friends,
    This is the problem with table control lines:
    I have screen with table control and I would like change the table control lines dynamicaly.
    Exp:
    In my PBO the Internal table which I am using to loop the TC is havig 7 records and its displayed with 7 records, now I have added one more record into my ITAB and now ITAB is having 8 records, when I am looping this ITAB with TC its taking the TC lines 7 only.
    here is the code:
    Initial values in gt_scr400 = 8
    Initial values in tc_scr400 = 8
    Now added one more recor into gt_scr400 , now gt_scr400  = 9.
      LOOP AT   gt_scr400
           INTO wa_scr400
           WITH CONTROL tc_scr400
           CURSOR tc_scr400-current_line.
      ENDLOOP.
    I have used this logic :
      DESCRIBE TABLE gt_scr400 LINES g_rec_300 .
      tc_scr300-lines = g_rec_300.
    but its not modifying the lines in my table control.
    How to change the TC lines based on ITAB total records.
    Thanks,
    Sridhar

    there is a field in TableViewName-xxx
    don't remember the exact field name for (total no of records)
    you can check it in debug.  when you add records in Internal table, u need to modify this field which is set at the first time when table control is populated.

  • Big problem with status bar legibility in IOS 7.0.4

    Hi, i'm adressing this problem to Apple. I recently update my iphone 4s to ios 7.0.4 and i have found some problems with status bar visibility in certain apps. Ex: in Photo app, the status bar is dark and it is unreadable, same in Lockscreen in Emergency menu, in menu when someone calls or you call someone and in Camera app the status bar is black and overlaps with the text and option buttons of the app. Please fix this as soon as possible because it is very frustrating.Sorry for bad english :d

    There is no Apple hear in this user to user forum.
    YOu can send feedback here http://www.apple.com/feedback/

  • Problems with stacked bar chart in Java SDK and CRDesigner

    Hi @ll,
    I have an issue with the rendering of stacked bar charts through the Java SDK and the CRDesigner. unfortunately, my research in this forum and with the help of aunt google didn't lead to success.
    These are my problems:
    I have a  stacked bar chart which, when datasets/stacks increase in number per bar, displays errors:
    1.)  the single stacks of the bar merge together randomly and form bigger stacks with the sum of the singles. the information of  single stacks gets lost in the bar.
    2.)  the total sum of all singles is bigger than the maximum value on the y-axis displays. thus, the scaling is wrong.
    1.) appears in the CRDesigner as well as in the Java SDK
    2.) only occurs in the Java SDK
    Is there any trick to turn the random merging of slices off?
    Is the false scaling a known issue and is there a bugfix/workaround?
    many thanks for all advice
    Tom

    hi folks,
    i found the answer to the above problems:
    when you specify the recordfields that are responsible for the change to the next stack or bar, the 'stack' fields have to be unique.
    in my case i evaluated durations in msec (as stacks) from different devices (as bars). randomly i had the same durations for one device. what happens is, that CR does not notice a change and accumulates to the first stack with the same duration.
    surprisingly this also seems to derange the axis scaling. fix the problem by simply using an overall unique recordfield like rownum or a formula that forms the current timestamp to text as identifier for the stacking.
    cheers
    .t

  • Problem with the progress line in MS Project

    Hi there,
    I have a question about the progress line in MS Project. 
    My boss asked me to see how far we were with the work, so I inserted the column '% Complete' and then the progress line.
    Now my boss has a problem with the layout and I don't know how the fix it. The problem is at line 43 and 44, where the progress line indicates that we are behind on that group of tasks. But is it possible for the progress line to not indicate it on lines
    43 and 44 but only on lines 45 to 50? So my question is if it's possible to make the progress line go down (vertically) over line 43 and 44 instead of jumping to the back? 
    It would be much more simple if I could insert lines 43 ad 44 as text but not as a task, so that it just counts as a title of some tasks but nothing more than that. Is that possible in Project?
    (Lines 45 to 50 are subtasks for line 44, and 44 is a subtask for 43. So line 43 is the main task.)
    Normally there was a picture here but I couldn't upload it because my account is not yet verified... So hopefully you can understand the problem with the text. 
    If anyone could give my some advice or the solution, that would be great!
    Thanks in advance!

    Hi Thunderbal66--
    Basically your activity 43 is late because the sub tasks are also late. Thus MS Project shows the situation by moving the progress line backward. The progress line is automatically displayed based on your project progress, there is no way to manually change
    it unless you update your project.
    I think the question is not there. This is more a matter of project governance and transparency: why not showin that a project is late when it is late and taking the appropriate corrective actions?
    Hope this helps,
    Guillaume Rouyre, MBA, MVP, P-Seller |

  • Problems with scroll bars in list view

    Hello,
    I am using Xcelsius 2008 (Build Number 12,2,166).  I am still having trouble with scroll bars on my list view control. Other list views in my dashboard seem to be ok. It seems that this list view is not ignoring the blank cells in my excel file. I have gone through many things to correct this problem. I have added a new list view, I have copied other list views that work correctly but still no success. It seems that the "Ignore Blank Cells" property is not working correctly. Does anyone have a solution for this?
    Much Thx!

    Hi Yusufel,
    Please check the data whether the cells are really blank or having any space which could not be seen, etc.
    With best wishes
    BaaRaa.

  • Problem with Stacked Bar Chart

    I have a problem with a stacked bar chart in Numbers 09. My chart is a single series with 6 categories. All of the categories have different values. The first 5 categories display correctly. However, the last category does not display in the color its supposed to, but rather shows up as white/background instead of the grey color shown on the legend. However, the value label is displayed in the proper place.
    When I select other chart types (pie, regular bar, or regular column) the category shows up like it's supposed to.
    This is kind of annoying since I would rather use stacked bar instead of a pie chart. Is there an upper limit on the number of values it can display as a stacked bar chart? Is this just a bug? Thanks!

    Here's my result with six values in a single series. I double clicked the last bar to change its colour from the default grey (which was visible) to magenta.
    Numbers 2.0.3, iBook G4, OS X v10.4.11
    (Shot in the dark:) Try double clicking the value label, then changing the order position of this item.
    Regards,
    Barry

  • Help with Bar & Line Chart on dual Axes

    I'm attempting to build a chart with 2 series
    Series 1 is a total
    Series 2 is a percent value
    I want Series 1 to be a column and series 2 to be a line
    Here is what I tried
    right click on the Bar that Iwant to display as line.
    Select the series option and then select "Line" from the drop down.
    But when I do this both series change even though they on different Axes.
    What did I miss?
    Thanks
    Steve

    you should first create a line chart, then click the series and turn to 'riser'.
    Thx, Hao

  • Embedding youtube video in flash with as2 - problem with black bars

    I have successfully embedded the youtube video in my flash code with:
    //create area to put youtube video on screen
    this.createEmptyMovieClip("reason1_video", 10000);
    reason1_video._xscale = 60;
    reason1_video._yscale = 60;
    this.reason1_video.loadMovie("http://www.youtube.com/v/PUt7Kw9Q_Qc?hd=1");
    However, the video plays with black bars on top and bottom even though it plays without those directly from youtube:
    http://www.youtube.com/parallelic#p/c/258EA3637F3467BD/7/PUt7Kw9Q_Qc
    Even if I take off the scaling, it still has the black bars. How do I get rid of them?

    So basicly your putting a video in to your flash project

  • Problem with SCROL BAR

    In my form i have fields in tabelar view and i have scrol bar.
    When the query has been executed, I want to see all of data in my form and I offcourse must to scrol down, but when I receive a lot of data my action with scrol bar occure system block, CPU time increase and I must to terminate(with end task) the aplication.
    This happened, not allways, in Forms9i and Forms6i.
    Is this some oracle bug or exist some developers trick to solve this problem?
    Thanks, it's very imported to us!

    this may be affected by many factors assuming your form coding is good.
    you may first try to set the block's QUERY ARRAY SIZE to see if it helps. if you allows DML, then the DML arrary size too, but you need to balance them by many trials. In fact, if you get a powerful server/client machine, that helps too.

  • Problem with tool bar

    Hi,
    I have a problem with my illustrator CS5, the toolbar doesn't show sub-options.
    For example if I click the Rectangle Tool (M) button looking for sub-options (a sub-option is for example the Ellipse Tool (L)), nothing happens. I managed to use the Ellipse Tool (L) through shortcuts, but I want my tool bar to be able to display all the sub-options.
    In other words all the buttons with a little triangle at the button-right corner, are supposed to show sub-options, but they don't.
    I've consulted the problem with one of my co-workers, he suggested installing it all again -> I don't wanna do that.
    Please help.
    Thanks in advance.

    You have to click and hold the button. As an alternative you can alt-click it to cycle through the tools

  • Image scaling problem with object handles

    Hi,
    I am facing scaling problem.I am using custom actionscript component called editImage.EditImage consists imageHolder a flexsprite which holds
    image.Edit Image component is uing object handles to resize the image.I am applying mask to the base image which is loaded into imageholder.
    My requirement is when I scale the editImage only the mask image should be scaled not the base image.To achieve this I am using Invert matix .With this
    the base image is not scaled but it  is zoomed to its original size.But the base image should not zoomed and it should fit to the imageholder size always. When I scale the editImage only the mask image should scale.How to solve this.Please help .
    With thanks,
    Srinivas

    Hi Viki,
    I am scaling the mask image which is attached to imageHolder.When i  scale
    the image both the images are scaled.
    If u have time to find the below link:
    http://fainducomponents.s3.amazonaws.com/EditImageExample03.html
    u work with this component by masking the editImage.If u find any solution
    for scale only mask ,plz share the same.
    thanks,
    Srinivas

  • Problem with Video Time Line in CC

    I have encountered a problem with the video time line panel in CC.
    When importing a clip, the time line panel remains on top of the video image window.
    As before, the image window does not automatically resize to float above the time line panel.
    I cannot resize the clip image panel to make more room for the time line.
    I have tried to reset Photo Shop to the original state without success.  

    Are you using a docked workspace? What zoom? Is hardware acceleration working properly? What system? What footage? Screenshots? Much more info is required...
    Mylenium

  • Problems with Menu Bar after recent security update

    Ever since installing yesterday's security update I have been having problems with the menu bar. When clicking on the blue Apple in the upper left hand corner, no drop-down menu appears as it should. This problem also occurs in the drop-down menu named for the program in various instances (Thunderbird, Azureus, iTunes, Finder, Firefox) but not in others (Safari, Adium, VLC). Sometimes the menus are simply truncated and do not include all the options they should rather than not opening at all.
    I have run Disk Utlity which found no problems and have performed a hard restart multiple times but the problem persists. Any advice would be very helpful. Thank you.

    Thanks for the help. I tried most of the solutions listed in the link you supplied, but am still having the same problem. However, when I tried to run the Tiger Cache Cleaner, I got the following error message:
    Runtime Error 4: Failed Assertion
    Location: /Volumes/RBUS/Common/MacOs/MacOSMenu.cpp:420
    Failure Condition: appMenu
    Failure Message:
    Please report what caused this error along with the details above.
    Thoughts?

  • Problems with usage bar in iTunes 12.1.0.71

    Hello,
    I'm having a problem with the usage bar in iTunes: the "apps" section of the usage bar will just disappear as I'm syncing/removing/adding music.  Restoring my iPhone and uninstalling/reinstalling iTunes does not help.  Anyone know why this is happening?  It makes it  hard to know how much space  is remaining when the apps category disappears while I'm adding/removing music.
    Thank you!
    Kevin

    the1212 wrote:
    After updating to the latest version of iTunes 12.1.0.71,my ipad mini is not being picked up by itunes even though its showing its connected and i can see it 
    This doesn't make sense. Your statement "even though it's showing its connected" means that iTunes does see the iPad. Or am I misreading what you are saying?
    Go through the troubleshooting steps in here.
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

Maybe you are looking for