Vertical bar in table control
HELLO ALL,
I AM HAVING A PROBLEM WITH VERTICAL BAR IN MODULE POOL PROGRAM FOR A TABLE CONTROL.
WHEN I TRIED WITH WIZARD ITS WORK FINE BUT WHEN I CREATE MANUALLY, FIRST OF ALL IT DOESN'T GIVE ME ANY VERTICAL BAR.
Pls do let me know if i need to anything to get vertical bar so that i can insert any number of lines in my table control
hi RAVI KANTH,
I just want to create table control manually with vertical bar and i don't have page down icon on my screen.
can you tell how to proceed regarding this
tHANKS IN ADVANCE
Similar Messages
-
Remove vertical scroll bar from table control
hi,
i had used table control in my application. i want remove vertical scroll bar from table control.
At initial time in table control there is no vertical scroll bar. In my table control lines are dependent on internal table which i was used to fill it.
i was used these code for to set table control lines.
DESCRIBE TABLE IT_RISK_ZINRISEXC LINES EXC_LINE.
TC_RISK_EX-LINES = EXC_LINE .
Initially there is no data in internal table so there is no vertical scroll bar. After getting value i am filling internal table. and there is scroll bar in my table control. but i does not want that.
i was not selected RESIZING-VERTICAL OR -HORIZONTAL.Hi,
From Scroll Bars in Table Control
You can remove the scroll bar in the table control by switching off horizontal and vertical scrolling in the properties of the table control. The properties can be accessed from the screen painter by double clicking on the table control. Regarding the page up and page down functions, I believe you add those buttons in the screen layout and code for them. You can use the standard function code for the page up and page down functions.
or
You can get rid of the vertical scroll bars by not setting table control lines. This way the user can only see the visible lines of the table control. As for the horizontal scrollbar, just make sure that your table control doesn't contain too many fields.
Regards,
Raj. -
How to handle scroll bar in table control in bdc
hi friends,
how to handle scroll bar coding in table control in bdc
Thanks & Regards,
Srinadh Dhi,
check the sites :
table control scrolling:
Scrolling in table control
Re: scrolling in table control
Table control - Vertical scrolling problem
table control scrolling problem -
Scroll bar in table control without wizard
Dear All,
I have made a module pool program for gate pass. In which i have taken a TABLE CONTROL WITHOUT WIZARD. Now my problem is , the table control does not have the SCROLL BAR functionality. It is not showing the scroll bar also. So can any one of you can help with the code that i can use to bring that scroll bar.
Table control is without wizard.
Thanks & Regards
VijjuHi,
In PBO module write the code as,
data: fill TYPE i.
DESCRIBE TABLE itab LINES fill.
flights-lines = fill.
Flights is the table control name in screen and itab is the internal table name.
Regards
Haritha
Edited by: Haritha Teegala on Jan 6, 2012 7:53 AM -
How to create vertical Scrollbar in table control?
Dear All,
How to create vertical scrollbar in table controll.?
regards,
DharmeshHi
It should be created automatically, if you can't see it, try to set the field lines of table control
PROCESS PBO
MODULE SET_ATTR_TC.
LOOP AT ITAB WITH .....
ENDLOOP.
MODULE SET_ATTR_TC.
DESCRIBE TABLE ITAB LINES SY-TABIX.
<TABLE CONTROL>-LINES = SY-TABIX.
ENDMODULE.
Max -
Vertical scroll bar in table control with wizrads
Hi,
Im working on a table control with a customised table. I created a table control with wizards. But vertical scroll bar is not working. How can i invoke vertical scroll bar and can any one provide the code for the all the operations on a table control like save,find,find next,change....Thanks in advance.
AvinashHi Avinash
move the records number of your internal table into field LINES of tablecontrol. So you should change the code generated by wizard in PBO, for example create a new module:
PROCESS PBO
MODULE SET_DATA_TO_T_CTRL.
LOOP..
ENDLOOP.
MODULE SET_DATA_TO_T_CTRL.
DESCRIBE TABLE ITAB LINE SY-TABIX.
<TABLECONTROL>-LINES = SY-TABIX.
ENDMODULE.
Max -
How to activate the Vertival Scroll Bar to Table control
Hi All,
I Have created a Module pool table control(Wizard) with Input control,where user can enter the values in the screen.
In my screen 15 lines are visible,once i enter all 15 rows,vertical scroll bar is active,but rest of all lines are in deactivate mode.
My requirement is:Once i enter all the visible lines,the remaining lines should be in activ mode(In put control).
I appreciate your response.
Best Regards,
SeshadriDATA : BEGIN OF IT_MARA OCCURS 1,
MATNR LIKE MARA-MATNR,
ERSDA LIKE MARA-ERSDA,
ERNAM LIKE MARA-ERNAM,
MTART LIKE MARA-MTART,
MBRSH LIKE MARA-MBRSH,
V_FLAG TYPE C,
END OF IT_MARA.
DATA : WA_MARA LIKE it_MARA .
CONTROLS TABLE TYPE TABLEVIEW USING SCREEN 100.
MODULE POPULATE_100 INPUT.
CASE SY-UCOMM.
WHEN 'DISP'.
SELECT MATNR
ERSDA
ERNAM
MTART
MBRSH FROM MARA INTO WA_MARA .
APPEND WA_MARA TO IT_MARA.
ENDSELECT.
DESCRIBE TABLE IT_MARA LINES V_TEXT.
TABLE-LINES = V_TEXT.
CLEAR IT_MARA.
Regards..
Balaji ( assign if this helps u ..) -
Hi,
How do I remove the vertical and horizontal scroll bars in the table control? I would like to use the Pg Up/Down buttons instead.
Thanks,
Mounika.Mounika,
You can add or remove the scroll bar in the table control by switching off horizontal and vertical scrolling in the properties of the table control. The properties can be accessed from the screen painter by double clicking on the table control. Regarding the page up and page down functions, I believe you add those buttons in the screen layout and code for them. You can use the standard function code for the page up and page down functions.
Regarding the Page up Page down...You need to add some extra code in your program to activvate that. Check the following program for example.
DEMO_DYNPRO_TABCONT_LOOP_AT
or try something like this
try something like:
CASE sy-ucomm.
WHEN 'P+' OR
'P++' OR
'P-' OR
'P--'
CALL FUNCTION 'SCROLLING_IN_TABLE'
EXPORTING
entry_act = tc-top_line
entry_to = tc-lines
last_page_full = 'X'
loops = loops
ok_code = sy-ucomm
overlapping = 'X'
IMPORTING
entry_new = tc-top_line
EXCEPTIONS
no_entry_or_page_act = 1
no_entry_to = 2
no_ok_code_or_page_go = 3
OTHERS = 4
ENDCASE .
Hope this helps
Vinodh Balakrishnan -
Vertical scrolling in table control
Hi Friends,
How to enable the vertical scroll bar in the table control. I my form, this is not working, but horizontal scroll bar is working.
Kindly guide me to get the vertical scroll bar working.
TIA.
Regards,
Mark KHi,
Let us say table control name is TC1. You have to assign a value to TC1-lines in PBO event in a module.
try this. Determine the number of records in your internal table.
describe table itab lines gv_lines.
TC1-lines = gv_lines.
thanks,
sksingh -
Problem with Vertical scroll in table control
Dear All,
I am facing a problem with table control in module pool program. currently it displays 6 lines, but it does not display the vertical scroll button, even though when I fill data in the six rows and hit enter.
I have set the vertical scroll option on the table control properties also.
Can someone help me by sending some sample code?
Thanks,
Amit GoyalHI Amit ,
If you have already selected the properties of vertical and horizontal scroll bar then no other operations needed .. if the number of rows increases then that of the table control , you will automatically see the Vertical scroll in your table control ..
if still you dont see it then write back ..
Reward if helpful !
Thanks
Ranjita -
Urgent!!!!Add a Horizontal Scroll Bar for Table Control
Hi Experts,
I want to have a Horizontal Scroll Bar on my Table control.
I tried with few properties for the Table UI Element but not able to solve it.
If any one who had already done this please help me out.
Thanks in advance..
Regards, Kishore KHI Koen,
Thanks for early Reply.
When I use this I get
Page Down ( ->!!, Arrown with lines pointing Down)
Page UP
Page Top ( ->, Arrown with lines pointing Top)
Page Down ( ->, Arrown with lines pointing Down)
But I need only Page top and Page down for this Table UI .
I think my question is clear enough.
Please let me know this also.
Thanks & Regards,
Kishore K -
Vertical resizing in Table control
Hi,
I am using 2 table controls in a screen . I have marked vertical resizing in attributes of the screen. but it is not allowing for vertical scroll. i have checked out in all screen attributes . Please help me with this issue.in the PBO include these lines
<tabctrlname> is the name of the table control placed on the screen.
it_tabctrl is the internal table data that is being passed to the table control.
describe table it_tabctrl lines N.
<tabctrlname>-lines = N.
Regards
Gopi -
Error in Vertical Scrolling of Table Control
Hi All,
I make Table control using wizard for internal table which I declare in TOP include.
But my Vertical Scrolling is not working.
Would appreciate your reply .
Regards,
PoojaHi pooja ,
When you will fill the entries till the bottom , scroll will appear .
don't worry about it
Regards
Yogendra Bhaskar -
Disable Vertical scroll but enable Page down in Table control for BDC
Hello All
In my 4.6C sysem , i had enabled Scroll bar in table control by populating TABC-lines = <No of records>...Then when i try to capture the BDC recording of this , then the scrolling event is not captured in BDC , as we all know.....
So i put few buttons on the application bar as NEXT PAGE, NEXT LINE , PREV PAGE n PREV LINE...and i did the scrolling by writing the code manually in PAI...and that is getting captured in BDC so my problem is partially solved...
Now as u see..i have default working Scroll bar on my T.C..also i have my buttons on the application bar....i want to get rid of the vertical scrolling....so now i am NOT populating the TABC-lines field...But as soon as i do this , my buttons stopped also working...Any idea how to get rid of this ?
In short when i don't write : TABC-lines = no_of_records .....to remove vertical scroling.......my manual scrolling mechanism also getting disabled..
Is it possible to remove only vertical scrolling ?
Thanks in advance .
NileshNo reply from any one ???
-
Table control scroll bar issue
how to set the scroll bar for table control for the transaction code va42 for billing plan tab.
i have added few custom fileds for the table control, when i m re-arranging the columns for the table control, the scroll bar is fixed for one field( as standard) and the scroll bar starts from that place. how to fix the scroll bar or control the scroll bar and sets it position for the desired column.HI,
Table control ahs a property called FIXED_COLS. You ave to pass the column number to this property.
Maybe you are looking for
-
Battery repair request online NOT working- please help!
Hello- I have been trying for 2 weeks to request battery replacement for my 20GB iPod but am unsuccessful. I get to the page to enter my credit card information and it times out each time. Is there someone I can talk to, or perhaps do this so that it
-
I want to know if i can buy i phone 4s unlocked becausse i live
I want to know if i can buy i phone 4s unlocked becausse i live in Argentina? And what is the price, for 32gb
-
Ora:12705 unable to access NLS data files or invalid environment specified
Hi All, In our BW production SAP standard job DBA:update_stats is failing . In Job log we found that the info like Ora:12705 unable to access NLS data files or invalid environment specified. Connect to DB instance failed. Brconnect terminated with
-
Distribution point not installing
I'm having some issues with a new Distribution point. This is my first Server 2012 R2 distribution point and after installing the roles and features (I believe are required) the distribution point does not install. I can't see anything on the distrib
-
Is it possible to batch bounce audio files from markers?
Archiving old DAT tapes, I'm wondering if it's possible to create and even name markers on the fly and later "batch bounce" the whole tape offline to audio files bearing the same name as the markers. I'm aware that you can split regions & batch bounc