Vertical Bars in 1080p video (PP CS4)

I recently shot some footage on a newer camcorder capable of recording 1080p footage, and the footage recorded as MP4. When I import directly into PP CS4, I choose the 'AVCHD 1080p30' present. The video imports as it should into the project, and displays as it should in the Source Monitor, but when I move the footage to the timeline, the Program Monitor's output shows vertical bars around the footage. I should also note that I've only used the AVCHD preset because I'm not 100% how to simply start a new timeline that's 'just 1080p30.'
The Timeline's resolution and source video's resolution are both 1080p.
When I export the final video, I still see the vertical bars.
Any insights?

Ann, I had a look into your suggestion, and no such option exists in my Mac system preferences.
As a side thought, I imported some regular (non-HD) footage into Premiere, and matched up the settings, and I don't have this problem.

Similar Messages

CS4: Converting AVCHD to NTSC widescreen - narrow vertical bars

Hey, folks.
We're shooting with a Panasonic AG-HMC70P which saves as 1080/60i AVCHD. My target format is NTSC DVD Widescreen (16:9).
Using the MPEG2-DVD format in Media Encoder and selecting Widescreen as the pixel aspect ratio, I get very narrow vertical bars on the left and right, i.e. it's clearly widescreen and not 4:3, but it's simply not filling the complete width of the screen when converting.
The properties of the imported .mts file report a pixel aspect ratio of 1.3333, versus the output format 1.2121, and I'm wondering if this is the source of the bars or there's something else that I'm not setting properly. I'm rather new to CS4, so cockpit error is highly likely here.
This is what properties reports on the imported source file:
==========================================
Type: MPEG Movie
File Size: 363.5 MB
Image Size: 1440 x 1080
Pixel Depth: 32
Frame Rate: 29.97
Source Audio Format: 48000 Hz - compressed - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00:03:59:15
Average Data Rate: 1.5 MB / second
Pixel Aspect Ratio: 1.3333
And here's what the resulting converted file with the vertical sidebars reports:
=======================================================
Type: MPEG Movie
File Size: 10.4 MB
Image Size: 720 x 480
Pixel Depth: 32
Frame Rate: 29.97
Total Duration: 00;00;12;16
Average Data Rate: 852 KB / second
Pixel Aspect Ratio: 1.2121
(The target duration is shorter than the source because I'm testing and don't need to render the entire thing until I get it right.)
Been reading manuals, poking Google with a stick and trying various other forms of self education but have come up short. If any of you could point me in the right direction to properly convert AVCHD to NTSC widescreen, I'd be most grateful.
Thanks,
Chris

Hi, John.
Here's what I've learned thus far from Googling a bit. This seems to be a common issue, and the solution I've seen proposed (actually from a Vegas forum but the issue is the same) is to expand or crop the image. Taking that advice, I've cropped the top and bottom by 12 and it gets rid of the bars.
While this seems to work, I can't help but feel that this is a hack and that there's actually a "proper" way to deal with this. Surely we're not the only folks going from AVCHD to NTSC widescreen, so I'd be surprised if this was something that the Adobe devs simply missed.
So, while I have a momentary workaround, I'm still in search of the best way to address this issue. Hope my hack is helpful to you as well.
Chris

Vertical bars during video recording

Hi,
I have seen a vertical bar while I was recording a video using the primary camera in my iPhone 5. It appeared twice on the same day, but didnt see it again after that. I have attached the screenshot from the video how it looks, I could see it during the play back too. Is this a hardware issue, though it never occured again, just wanted to check if anyone else had experienced similar issue.
The phone is now upgraded to ios 7.
I have also seen issues when i try to resume the display from standby, it filckers for a second and had to press the standby button again to resume.
-Shak

I know. Same issue here. When I'm not recording but have the video camera on, the autofocus works fine. As soon as I tap the record button and recording starts, the focus is locked until I tap on the screen to focus. I haven't used the camera all that much because of this problem.

CSS, Flash, or HTML? What is causing the white vertical bar?

I am using an I-frame to embed a photo gallery that was created with Adobe Bridge CS4. Adobe Bridge instructed me to make the iframe height = 75% of the width. The code is <iframe src="PhotoAlbum/index.html" width="900" height="675" frameborder="0"></iframe>
#photoAlbum contains the iframe with the following properties:
#photoAlbum {
margin-top: 20px;
margin-right: auto;
margin-bottom: 0px;
margin-left: auto;
width: 900px;
text-align: center;
padding-top: 20px;
padding-bottom: 20px;
border-top-width: 2px;
border-top-style: groove;
border-top-color: #333;
I tried changing the width to 960, 900, 850 etc with no success.
I have tried making the background of #photoAlbum black with no success.
The link to the photo album is http://www.gigharborrealestate.com/youtube/016/PhotoAlbum/index.html
The site that I am having problems with is http://www.gigharborrealestate.com/youtube/016/ On the right side of the Trelliis Grove Photo Gallery is a white vertical bar. If you go to /PhotoAlbum/index.html there is no white bar.
Why does this bar show up when /PhotoAlbum/index.html is put into an I-frame? How can I get rid of the vertical bar?

Cool so where do I start
I found this Tutorial:
http://www.toxiclab.org/tutorial.asp?ID=37
But I've never done html in flash before

IPhone 5 1080p video

My iTunes preferences are all set to 1080p for HD movie downloads, although Apple says my iPhone 5 will play 1080p video, its only downloading the 720p version to my device. Does anyone know why this is the case?
Thanks

haha...its 'marketing' all right..not science... 1080p video means 1080 number of vertical lines. iphone 5 is 1136x640. so it really doesnt even have the number of lines required for half-HD which is 720p. In any case, you won't see any difference viewing 720p vs 1080p on the iphone because the # of lines are just not there. Now if you are downloading and connecting to a hdtv and streaming thats a different thing because the hdtv will support 1080p. but the phone does not.

GREP search: vertical bar

What GrEP expression will find a vertical bar(like this: | )?
I would have thought a simple escape (like this: \| ) would do it, but no.

Surely that does work? The Vertical Bar (or "pipe", though I bet non-smokers object to that name) is a special character in GREP as it separates excluding expressions, and as such it should be escaped as usual for literal use.
(In addition to Eugene's: you can always put \Q and \E around any sequence that should not be parsed as special GREP command. That would be:
\Q|\E
and it has the advantage you don't have to know the hex code for the pipe. )
Here is an image of \| in a GREP style (and on my CS4 it also works just fine with the usualy Find/GREP mode):

Problem with VDPAU and 1080p videos

I made a fresh install of Arch on my trusty Thinkpad. It's a T510 with a 3100M gpu from Nvidia.
Hardware decoding worked fine in the past, but after my freshly made install mpv doesn't seem to
like 1080p videos.
File tags:
major_brand: isom
minor_version: 512
compatible_brands: isomiso2avc1mp41
encoder: Lavf55.33.100
[stream] Video (+) --vid=1 (*) (h264)
[stream] Audio (+) --aid=1 --alang=eng (*) (aac)
Trying to use hardware decoding.
AO: [pulse] 48000Hz stereo 2ch float
[ffmpeg/video] h264: get_buffer() failed
[ffmpeg/video] h264: thread_get_buffer() failed
[ffmpeg/video] h264: decode_slice_header error
[ffmpeg/video] h264: no frame!
Error while decoding frame!
Error using hardware decoding, falling back to software decoding.
AV: 00:00:00 / 00:02:23 (0%) A-V: 0.000
Using conversion filter.
AV: 00:00:00 / 00:02:23 (0%) A-V: 0.000
VO: [vdpau] 1920x1080 => 1920x1080 yuyv422
[vo/vdpau] Compositing window manager detected. Assuming timing info is inaccurate.
[vo/vdpau] Error when calling vdp_output_surface_create: The system does not have enough resources to complete the requested operation at this time.
[vo/vdpau] Error when allocating surface: The system does not have enough resources to complete the requested operation at this time.
[vo/vdpau] Error when uploading surface: An invalid handle value was provided.
AV: 00:00:00 / 00:02:23 (0%) A-V: 0.000
[vo/vdpau] Error when calling vdp_video_mixer_create: The system does not have enough resources to complete the requested operation at this time.
AV: 00:00:00 / 00:02:23 (0%) A-V: 0.000
[vo/vdpau] Error when calling vdp_output_surface_destroy: An invalid handle value was provided.
[vo/vdpau] Error when calling vdp_output_surface_create: The system does not have enough resources to complete the requested operation at this time.
[vo/vdpau] Error when calling vdp_output_surface_create: A catch-all error, used when no other error code applies.
[vo/vdpau] Error when calling vdp_output_surface_create: A catch-all error, used when no other error code applies.
AV: 00:00:00 / 00:02:23 (0%) A-V: 0.000
[vo/vdpau] Error when calling vdp_presentation_queue_block_until_surface_idle: An invalid handle value was provided.
[vo/vdpau] Error when calling vdp_video_mixer_destroy: An invalid handle value was provided.
[vo/vdpau] Error when calling vdp_video_mixer_create: The system does not have enough resources to complete the requested operation at this time.
[vo/vdpau] Error calling presentation_queue_query_surface_status: An invalid handle value was provided.
[vo/vdpau] Error when calling vdp_presentation_queue_display: An invalid handle value was provided.
AV: 00:00:00 / 00:02:23 (0%) A-V: 0.020
[vo/vdpau] Error when calling vdp_presentation_queue_block_until_surface_idle: An invalid handle value was provided.
[vo/vdpau] Error when calling vdp_video_mixer_destroy: An invalid handle value was provided.
[vo/vdpau] Error when calling vdp_video_mixer_create: The system does not have enough resources to complete the requested operation at this time.
[vo/vdpau] Error calling presentation_queue_query_surface_status: An invalid handle value was provided.
[vo/vdpau] Error when calling vdp_presentation_queue_display: An invalid handle value was provided.
AV: 00:00:00 / 00:02:23 (0%) A-V: -0.000
[vo/vdpau] Error when calling vdp_presentation_queue_block_until_surface_idle: An invalid handle value was provided.
[vo/vdpau] Error when calling vdp_video_mixer_destroy: An invalid handle value was provided.
[vo/vdpau] Error when calling vdp_video_mixer_create: The system does not have enough resources to complete the requested operation at this time.
[vo/vdpau] Error calling presentation_queue_query_surface_status: An invalid handle value was provided.
[vo/vdpau] Error when calling vdp_presentation_queue_display: An invalid handle value was provided.
AV: 00:00:00 / 00:02:23 (0%) A-V: -0.000
[vo/vdpau] Error when calling vdp_presentation_queue_block_until_surface_idle: An invalid handle value was provided.
[vo/vdpau] Error when calling vdp_video_mixer_destroy: An invalid handle value was provided.
[vo/vdpau] Error when calling vdp_video_mixer_render: An invalid handle value was provided.
[vo/vdpau] Error calling presentation_queue_query_surface_status: An invalid handle value was provided.
[vo/vdpau] Error when calling vdp_presentation_queue_display: An invalid handle value was provided.
AV: 00:00:00 / 00:02:23 (0%) A-V: -0.000
[vo/vdpau] Error when calling vdp_presentation_queue_block_until_surface_idle: An invalid handle value was provided.
[vo/vdpau] Error when calling vdp_video_mixer_render: An invalid handle value was provided.
[vo/vdpau] Error calling presentation_queue_query_surface_status: An invalid handle value was provided.
[vo/vdpau] Error when calling vdp_presentation_queue_display: An invalid handle value was provided.
It doesn't really matter if it's an 10 or 8 bit video, it always falls back to software decoding, spouts out these error messages and as a result
the video is completely fucked up or just stutters/drops frames like crazy. This only happens with 1080p videos, 720p or below is just fine.
Here's my mpv config...
# Write your default config options here!
# default configuration that applies to every file
[default]
# use alsa for audio output, choose pulse, or oss4 as fallback
ao=pulse
# try to use high quality opengl output, with standard opengl, classic xv, and
# wayland as fallbacks
# # note: opengl has numerous quality/performance trade-off options.
# # as per the mpv(1), "opengl-hq" is just an alias for
# "opengl:lscale=lanczos2:dither-depth=auto:fbo-format=rgb16"
vo=vdpau
hwdec=vdpau
hwdec-codecs=all
# set the window title using the media filename (see Property Expansion section
# of mpv(1))
title="${filename}"
# disable screensaver
stop-screensaver="yes"
# correct pitch when speed is faster or slower than 1.0
af=scaletempo
# gapless audio play
# gapless-audio
osd-font='droid sans'
screenshot-format=jpg
...and last but not least the output from 'vdpauinfo'...
display: :0 screen: 0
API version: 1
Information string: NVIDIA VDPAU Driver Shared Library 337.25 Tue May 27 12:24:30 PDT 2014
Video surface:
name width height types
420 4096 4096 NV12 YV12
422 4096 4096 UYVY YUYV
Decoder capabilities:
name level macbs width height
MPEG1 0 8192 2048 2048
MPEG2_SIMPLE 3 8192 2048 2048
MPEG2_MAIN 3 8192 2048 2048
H264_MAIN 41 8192 2048 2048
H264_HIGH 41 8192 2048 2048
VC1_SIMPLE 1 8190 2048 2048
VC1_MAIN 2 8190 2048 2048
VC1_ADVANCED 4 8190 2048 2048
MPEG4_PART2_SP 3 8192 2048 2048
MPEG4_PART2_ASP 5 8192 2048 2048
DIVX4_QMOBILE 0 8192 2048 2048
DIVX4_MOBILE 0 8192 2048 2048
DIVX4_HOME_THEATER 0 8192 2048 2048
DIVX4_HD_1080P 0 8192 2048 2048
DIVX5_QMOBILE 0 8192 2048 2048
DIVX5_MOBILE 0 8192 2048 2048
DIVX5_HOME_THEATER 0 8192 2048 2048
DIVX5_HD_1080P 0 8192 2048 2048
Output surface:
name width height nat types
B8G8R8A8 8192 8192 y Y8U8V8A8 V8U8Y8A8
R10G10B10A2 8192 8192 y Y8U8V8A8 V8U8Y8A8
Bitmap surface:
name width height
B8G8R8A8 8192 8192
R8G8B8A8 8192 8192
R10G10B10A2 8192 8192
B10G10R10A2 8192 8192
A8 8192 8192
Video mixer:
feature name sup
DEINTERLACE_TEMPORAL y
DEINTERLACE_TEMPORAL_SPATIAL y
INVERSE_TELECINE y
NOISE_REDUCTION y
SHARPNESS y
LUMA_KEY y
HIGH QUALITY SCALING - L1 y
HIGH QUALITY SCALING - L2 -
HIGH QUALITY SCALING - L3 -
HIGH QUALITY SCALING - L4 -
HIGH QUALITY SCALING - L5 -
HIGH QUALITY SCALING - L6 -
HIGH QUALITY SCALING - L7 -
HIGH QUALITY SCALING - L8 -
HIGH QUALITY SCALING - L9 -
parameter name sup min max
VIDEO_SURFACE_WIDTH y 1 4096
VIDEO_SURFACE_HEIGHT y 1 4096
CHROMA_TYPE y
LAYERS y 0 4
attribute name sup min max
BACKGROUND_COLOR y
CSC_MATRIX y
NOISE_REDUCTION_LEVEL y 0.00 1.00
SHARPNESS_LEVEL y -1.00 1.00
LUMA_KEY_MIN_LUMA y
LUMA_KEY_MAX_LUMA y

I'm experiencing this as well, specifically on 0.4.x. If I downgrade to 0.3.9 it works fine, vdpau and all. Try it yourself. I'm thinking it's a bug in mpv.

When i play 1080p video on my new lg tv from my macbook retina late 2013, it stutters.

When i play videos from my ssd from my macbook pro retina it stutters. Mostly it happens with 1080p videos.
Ive read different discussions about this topic and ive already tried to set my tv in cinema mote. This didnt help.
Also i tried to turn off tru motion, this didnt help as well.
Ive also tried different videoplayers but it didnt make a difference.
When i play it on my internal macbook screen it doenst stutter at all. It only happens on my external lg tv screen with hdmi.
Ive tried different hdmi cables as well but this too didnt make a difference.
Ive also heard about different refresh rates but i doent know how i can adjust this on my lg tv (lg46LM760).
Please help the stuttering is very annoying and there is no quick awnser available anywhere on the web. And since this is a common problem with many people the awnser probably helps a lot of people.

Additionally, you can run the Apple Diagnostics test from home, though it would not be as reliable as Apple's in house diagnostics in detecting an issue:
Using Apple Diagnostics - Support

I dropped my iPhone 5s and white vertical bars problem

Hey all,
Recently today I dropped my iPhone 5s and white vertical bars started to appear in the right hand side of my phone... Do I just need to get my screen replaced or is there more to the problem?

Apple doesn't replace the display on the 5s, only the 5 and the 5c. Probably wouldn't matter anyway. The damage is probably more extensive than just the display.
Make an appointment at the genius bar. A replacement is $269 if you don't have AppleCare+

How to create a vertical bar chart from a table? (PHP, HTML and CSS)

Hi everyone,
I have created a table and wish to proceed to do it even better in terms of analysis pattern. I want
to create a vertical bar chart from the created table but I dunno how to start it.
Here is the code for the table:
<?php
$gpa11=$_REQUEST['gpa11'];
$gpa12=$_REQUEST['gpa12'];
$gpa21=$_REQUEST['gpa21'];
$gpa22=$_REQUEST['gpa22'];
$gpa31=$_REQUEST['gpa31'];
$gpa32=$_REQUEST['gpa32'];
$gpa41=$_REQUEST['gpa41'];
$gpa42=$_REQUEST['gpa42'];
$gpa51=$_REQUEST['gpa51'];
$gpa52=$_REQUEST['gpa52'];
?>
<!doctype html>
<html lang="en">
   <head>
      <meta charset="utf-8">
      <meta name="viewport" content="width=1024">
      <title>Feng Mentor Mentee</title>
   </head>
   <body>
      <div id="wrapper">
         <div class="chart">
            <h3>GPA Performance Graph</h3>
            <table id="data-table" border="1" cellpadding="10" cellspacing="0"
            summary="The performance of students throughout the years in university">
               <thead>
                  <tr>
                     <td> </td>
                     <th scope="col">Year 1</th>
                     <th scope="col">Year 2</th>
                     <th scope="col">Year 3</th>
                     <th scope="col">Year 4</th>
                     <th scope="col">Year 5</th>
                  </tr>
               </thead>
               <tbody>
                  <tr>
                     <th scope="row">Sem 1</th>
                     <td><?php echo $gpa11;?></td>
                     <td><?php echo $gpa21;?></td>
                     <td><?php echo $gpa31;?></td>
                     <td><?php echo $gpa41;?></td>
                     <td><?php echo $gpa51;?></td>
                  </tr>
                  <tr>
                     <th scope="row">Sem 2</th>
                     <td><?php echo $gpa12;?></td>
                     <td><?php echo $gpa22;?></td>
                     <td><?php echo $gpa32;?></td>
                     <td><?php echo $gpa42;?></td>
                     <td><?php echo $gpa52;?></td>
                  </tr>
               </tbody>
            </table>
         </div>
      </div>
   </body>
</html>
Here's the look:
                                                          GPA Performance Graph
Year 1
Year 2
Year 3
Year 4
Year 5
Sem 1
Sem 2
Please help me on this because this is my 1st project on php.

Hi
Are you using BI query? If yes then follow the steps -
1. Take Sales org in rows of BI query. & take invoice type & Key figure in Columns.
2. In VC use this query & drag chart from the output of this query.
3. Right click on chart & go to 'Configure Element'. There select Chart Type as 'Bar chart'
4. Below that you will get default option as clustered, there you select 'Stacked'
5. Create Data series as per your requirement.
6. Arrange proper layout of the model & then deploy.
You will get required output in stacked format.
Regards
Sandeep

A cursor is displaying where I clicked mouse on the Firefox screen. If, I clicked on a page or a link in a page, a cursor pointer(vertical bar is blinking).

Hi, Hello, Sir/Madam, I'm a Firefox user from India. My problem is,
"Whenever I opened Firefox browser, and clicked on a page in the browser(even the start-up home page), a vertical bar starts to blink in the screen, even if I used tab button, to move over the link, the vertical bar appearing also moves accordingly. This problem I'm facing from yesterday(29.10.2012)".
Could you please tell me how to resolve this issue?

In addition to the above:
You probably have switched on caret browsing.
*http://kb.mozillazine.org/accessibility.browsewithcaret
*Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"
*http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
*http://kb.mozillazine.org/Accessibility_features_of_Firefox

Display name and value on label of vertical bar chart

Hi,
i have a vertical bar chart. On x-axis there are Countries: (Italy, Netherlands and so on), and on y-axies there are the values.
When i mouse over a bar, on default is shown only the value. I want show a tooltip with the value and the name.
For example, when i mouse over Netherlands bar, i want to display, NETHERLANDS , 92,45.
I've modified bar.pcxml file adding following string:
FormatString='%_YVALUE'
I've restarted all processes, but now when i mouse over on bar i see a tooltip with %_YVALUE text.
What's the correct syntax?
Thanks
Giancarlo

I don't think its possible to use this '%_YVALUE' for Bar graphs. Please refer to table 1.1 in the below link for the supported values for FormatString for each graph type:
[http://www.corda.com/docsource/doc4/popchart/docs/builder/creatin7.htm#447987]
As you can see, '%_YVALUE' and '%_XVALUE' are supported for X-Y graphs only, which I guess are Scatter and Bubble charts. I tried using other ones like '%_GRAPH_TOTAL' for bar graphs which just works fine.
Hope this helps!!
Thanks

When typing text in forms, the vertical bar gets multiplied all over the place.

Often when I'm typing text into a form on various sites, be it Facebook or this very site, the vertical bar that follows the input text gets randomized all over the line and appears multiple times. The glitch disappears about half a second after I stop typing (as soon as the pipe character starts blinking), but it still drives me nuts when I'm typing something regularly. You can find a screenshot of this in action from a Facebook form here: http://imgur.com/mNr9Y

Try to disable "Morphological Filtering" in the Catalyst drivers:
* Catalyst Control Center > 3D Settings > Disable Morphological Filtering

Quicktime not playing Apple ProRes (Proxy) 1080p video - help!

Hey guys I have a Apple ProRes (Proxy) 1080p video sent to me via Firevilla from a friend in the states - which simply says - "will not play - quicktime does not understand the format and may need additional software." All my software updates have been made. Does anyone know if I actually need a specific ad on??!! Or what is going on here!!??
Many Thanks

Because you're using QT 6.5.2 you can't view all QuickTime content. Quite a lot of pages are now using H.264 video and it can't be viewed using 6.5.2.
Try one of my pages to test your browser plug-in and QT version:
http://homepage.mac.com/kkirkster/California/index.html
The file is about 3MB's. If it plays correctly your browser and QT version are OK.
The plug-in settings can be found in the QT Control Panel (under MIME settings). You can also check your browser preferences for "helpers".

Does Mac support 1080p video?

Does mac and imovie 11 support 1080p video?

"Got your "Ins and Outs of iMovie" eBook; did not finish reading.
Read Appendix B (720p) or C (1080p). Here is some additional information for you:
When you next launch iMovie, and create a new project, the Project Properties will show 25fps or 30fps.
However, when you drag the first 50p or 60p clip into the project, when you check Project Properties you will see the fps field is blank.
Do not click in this Properties field.
From this point onward, iMovie will work at 50fps or 60fps.
Animated effects created by iMovie will be, however, created at25fps or 30fps. Each frame will be repeated twice.
iMovie must now process twice the number of frames per second, so it may be more sluggish.

Vertical Bars in 1080p video (PP CS4)

Similar Messages

Maybe you are looking for