Vertical black line with shade dots down left side of page - NEW Cartridge

I installed a NEW cartridge and was able to print about 30 pages before the paper began having a 1/16" black stripe with shade(?) dots down the left side.  Could someone please advise.
Thank you,
Erin

Thanks.
I am very new to Pages. Yesterday I decided to go after a "Brochure" template, as it already had at least one vertical line separating text passages on the left and right. But there were too many sections, so I went about deleting all the extraneous, unwanted lines. And also the unwanted horizontal lines. To do this, you have to click the line itself to discover where the "nodes" are. But the nodes are locked, so you have to go to the top control bar of the desktop. (I think that this is the option titled "arrange").
It appears that the secret to tinkering with the lines in the templates, is by unlocking the nodes to the lines, dragging them around, and then locking them in place again, saving them between major changes. In any case, none of this is going to be intuitive to users who come to the Mac from a text based 'DOS' universe. (I have absolutely no experience with Microsoft products, and would be lost if somebody asked me to do this from Windows.)
Now, I think I am going in the right direction, and I appreciate your help, but I'm still having a little difficulty switching back and forth from editing templates, and typing text in. What are the sequences of keypresses for going back and forth from editing the templates, and typing the text in?

Similar Messages

  • HP Laserjet 3600 Series Printer with a blank or incorrect colour column down left side of page

    Have a HP3600 Series Laserjet that has started to show a definite column (about 1/2" wide) of incorrect colour down the lefthand side of the page. Narrowed it down to the Magenta Cartridge after printing a diagnostics page.  Have replaced the Magenta Cartridge after doing calibrations and diagnostics and have also now replaced the Fuser Kit. Still the same - has anyone any suggestions?

    Hi ProspeorusCE,
    The product you have is a commercial printer. I suggest posting in the forum for HP Business Support for a better chance at finding a solution.
    Here is the link to the Commercial Laserjet board:
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • One of first versions of macbook air with black horizontal lines on bottom one third of screen and vertical line also one third of left side of screen

    one of first versions of macbook air with black horizontal lines on bottom one third of screen and vertical line also one third of left side of screen

    Hi
    I've recently notice I have a thin black line in my screen.. I went to Apple store and was told it’s a hardware problem (400$+ to fix as no warranty).
    This is the second time I’m having hardware screen issues with a Macbook Air (last time it was 3 months after I bought it, and it was replaced with this one)
    Looks like the Macbook Air screens are very problematic!  Anyone experience something like that?
    Thanks,
    Eyal.

  • My ipad mini is cracked in the bottom left corner of the screen and their is a thick black line with smaller coloured lines within it, is their anything I can do to fix it?

    My ipad mini is cracked in the bottom left corner of the screen and their is a thick black line with smaller coloured lines within it, is their anything I can do to fix it?

    Does this only happen on specific pages?
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    You can try to disable notifications as a test (you may want to reverse this).
    You can try to set the dom.webnotifications.enabled pref to false on the <b>about:config</b> page.
    *http://kb.mozillazine.org/about:config

  • IPad 3 - black line down left-side of screen

    My new iPad has dark thin line down left-side of screen.
    Any ideas why this appears?
    Screen appears fine apart from this line.

    take it to your local apple store and have them take a look at it. You probably want to make an appointment first.

  • Vertical black line artifact on JPEG exports

    Tried to export 57 images to original sized JPEGS. Images were shot RAW on a Nikon D80. My problem is that some of the photos were exported with a thin black line down the middle of the image. Strangely, this only happened to my photos that were shot in portrait orientation. This line is not there in the RAW files, or in the Aperture previews. I also exported one of these images to Photoshop CS3 for editing and the vertical black line appeared in that conversion as well. Does anyone have any idea what's going on or how to fix it?
    Example here: http://dl.dropbox.com/u/1375121/black_line.jpg
    I am running Aperture 3.0 and OSX 10.6.2 on a MBP 2.16 C2D with 2GB RAM. Aperture runs slowly, but otherwise seems to be working fine (except for the occasional green screen freakout when I'm using a brush).
    Thanks so much,
    Austin

    AustinFlack wrote:
    Yes, the images in question definitely have Noise Reduction. I think I set the value over 1.6. So there's no solution? That's incredibly frustrating.
    We only have to wait for a new release!!
    I have also noticed that the Noise Reduction seems not to be applied to the exported version, at least not in the same way as it is applied to the master image. Have you noticed this?

  • Vertical black line om camera and photos

    I have a vertical black line in my camera on my new iPhone 6. This black line also appers on photos I take. Something to do, or is it a pixel error?

    the line is only visible on camera not on video. if it is the lens i think it would be visible both on picturs and videos.

  • I did a hard reset on my iphone 5.  When it was resetting  black lines with text saying there were errors popped up at the top of the screen. any ideas??

    I did a hard reset on my Iphone 5,  when it was resetting black lines with white text popped up at the top of the screen.  Last line says _fetchBorrowedList:881 number of borrowed blocks 16.  It is stuck at this point and will do nothing.  Tried another hard reset and the same thing happened.  Any Ideas??

    Make an appointment at the genius bar and get the screen replaced if that's available in your area ($149) or get the phone replaced if it's not or if the damage is more extensive ($269).

  • TS1718 trying to watch repeats of itunes festival 2012, all I get is a black box with x in top left corner. any ideas? thanks

    trying to watch repeats of itunes festival 2012, all I get is a black box with x in top left corner. any ideas? thanks

    Thanks so much.  I saw this on "desktop strangeness" immediately after I posted and tried to retract my question.  It worked perfectly.  I'm not sure how VoiceOver got turned on unless something happened when I was trying to wake up the computer.  I open the lid and it flashes whatever is open and then the screen goes black and I can't wake it up.  Still looking for the resolution to this.

  • How to eliminate vertical black lines, every inch, from photos that I print.

    When I print my photos using Elements 13, I get vertical black lines every inch.  This does not happen when I print from other software.  What can cause this and how do I get rid of these?

    As Bruce said in post #4 the lines in the OP's question look very much like anti aliasing, but they might also be sharpening artifacts.  So, if these lines appear as a result of resizing the image, then the obvious question is which resize method is being used?  Preserve Details when upsizing might do that for instance.  (I do hope I haven't upset Chris Cox by misrepresenting Preserve Details). 
    So the question is, if you make the tile at one size, and try to use it at a larger size, how is the tile being upsized?  In fact I am not even sure that you can change the size of a custom pattern without redefining it.  Anyone?

  • How much will it cost to get the screen fixed on an ipad. theres no crack, its just a big black line with small colored lines.

    how much will it cost to get the screen fixed on an ipad. theres no crack, its just a big black line with small colored lines.

    If it's not considered to be within warranty, then the cost (from http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad for USA) will be :
    iPad Wi-Fi
    iPad 2 Wi-Fi
    Out-of-Warranty Service Fee
    16 GB
    $269
    32 GB
    $299
    64 GB
    $349
    iPad Wi-Fi
    iPad 2 Wi-Fi
    Out-of-Warranty Service Fee
    16 GB
    $319
    32 GB
    $369
    64 GB
    $419

  • Just tried setting up bootcamp on MacPro. Computer now boots to white screen before going to black screen with curser in upper left corner. Can anyone get me back to Mac operating system so I can start over again?

    Just tried setting up bootcamp on 2014 MacPro 13" laptop. Computer now boots to white screen before going to black screen with curser in upper left corner. Can anyone get me back to Mac operating system so I can start over again?

    Hi there rjr25350,
    You may find the information in the article below helpful.
    Boot Camp: Windows installation boots to black screen with blinking cursor
    http://support.apple.com/kb/TS4536
    -Griff W. 

  • No matter where I click a black box appears and on the left side a black box telling me where my cursor is at the moment. How do I get rid of those black boxes?

    No matter where I click a black box appears and on the left side a black box is telling me where the cursor is at the moment. How do I get rid of it?

     ▹ System Preferences ▹ Universal Access ▹ Seeing ▹ VoiceOver: Off

  • TS3276 When responding to an email, how do I suppress the "line" that appears on the left side of the originations email text?

    When responding to an email, how do I suppress the "line" that appears on the left side of the originations email text?

    Would you post a screen shot of a message so people can see what you are seeing? Make sure you cover any personal information using Preview. Post the screen shot in a Reply using the camera icon. Copy and paste doesn't work.
    Screen shots

  • How Can I Achieve Sliding Out Social Icons on Left side of Page?

    I have been trying to find free plugins, but ways to work with the various states in Muse, but am having trouble deciding which was is best. Here is an example of what I mean,,, but all are only for Wordpress.
    http://smartcatdesign.net/sliding-social-icons-free-wordpress-plugin/

    ok try and explain this best as I can....
    ok,,, I used a set PSD document size first to make sure all Active Icons were same size....(screen shot 1)
    2) Then after I had every icon I needed,, I saved each one as for instance facebook_active for site purposed,, but leave this document open to simply bring in the icon to next file
    3) Next I opened a new PSD document and set size to 153px x 47px (was size I was looking for, which would be my hover state in the end)
    4) If you look at my layers closely you will see kinda what I did,,, just added new layer and went little passed left edge of each icon with its own color: facebook=blue youtube=red.....
    5) Then I centered text to make sure all text would be in the same spot and look good.
    6) then when u have my 2nd screen shot,,, save that as facebook_hover
    7) Muse time,,,,, go to muse and make rectangle of the size of your hover size (my case was 153px X 47px) and place with left edge alligned to left side of page.
    go to fill,,, and image icon to upload your active icon first and make sure is original size and set to far middle left......then make sure your color fill is transparent,,, nothing.....
    8) Then go to states and rollover and then go back to fill and upload the hover image and do original size,, should fill rectangle exactly

Maybe you are looking for

  • How to see wsdl in JBoss?

    Hi, I have deployed a WebService application in JBoss. How to see wsdl at server (JBoss) side? I have supplied url: http://localhost:8080 in the browser, It is showing the below page, from here how to see the wsdl file? JBoss Online Resources     * J

  • Conflicting files problem when installing wine

    Hi, I'm trying to install wine, but get the following errors. # pacman -S wine resolving dependencies... :: There are 3 providers available for lib32-libgl: :: Repository multilib 1) lib32-mesa-libgl 2) lib32-nvidia-304xx-libgl 3) lib32-nvidia-libgl

  • SQL_Latin1_General_CP850_BIN2

    Hi, Any ideas/suggestions ? We are in a dev/qa/production landscape (R/3 470-200)and need to convert to SQL_Latin1_General_CP850_BIN2 before upgrading to SQL Server 2005. Firstly, are we able to do this progressively without affecting the transport q

  • Systemd --user can't create cpu cgroup

    Hi, recently I've started using 'systemd --user' to manage my sessions. I've followed the wiki and created xorg.service and several others. Then I configured cgroup controllers in /etc/systemd/{system.conf,logind.conf,user.conf} as follows (only rele

  • How to create a spool for the billing document

    Hi all In the ALV report i am getting the List of billing documents on the selection of any billinfg document i wanted to create the spool of the same is there any way for the same . please help.