Vertical blue line is displaying on the screen.

In my iphone4 the vertical blue line is displaying on the screen.please provide the solution.
the running ios is 6.1.3.

If your iPod Touch, iPhone, or iPad is Broken
Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
ATTN: Beginning July 2013 Apple Stores are now equipped to do screen repairs/replacements in-house on iPhone 5s. In some cases while you wait. According to Apple this is the beginning of equipping Apple Stores with the resources needed to do most repairs for iPhones, iPads, and iPod Touches that would not require major replacements. Later in the year the services may be extended as Apple Stores become equipped and staffed with the proper repair expertise. So, if you need a screen repaired or a broken screen replaced or have your stuck Home button fixed, call your local Apple Store to see if they are now doing these in-house.
You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
iPod Service Support and Costs
iPhone Service Support and Costs
iPad Service Support and Costs
There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task:
1. iResq or Google for others.
2. Buy and replace screen yourself: iFixit

Similar Messages

  • Vertical blue lines on external Thunderbolt display

    I use an Apple Thunderbolt Display connected to a 27" iMac using OS X 10.9 (Mavericks). I've been using this set up since last June, but in the last 30 days or so I have noticed that vertical blue lines started appearing in the Thunderbolt Display. It started with one single pixel wide line at first, but now the section with vertical blue lines is about 2 inches wide. The lines are not always there. It happens mostly in the morning.
    The display is still under Apple's warranty, but I wanted to find out if there's anything I can do to fix the problem before deciding to take the display to the nearest Apple Store.

    If touching the tab can make the problem go away, perhaps you can put a piece of compressible material, like weather stripping, in the assembly such that when you bolt it all back together the material keeps pressure on the tab same as if you had your finger on it. OK, that's a long shot. But there is no other way to restore a failed tab bond that I am aware of.

  • I repaired a cracked iphone 5c screen now I have a black screen with a vertical blue line on the left hand side of the screen. please help!!

    Hi all,
    Please help, I repaired an iphone 5c and have now tried two different lcd screens on it but all I get is a black screen or a black screen with a vertical blue line on the left hand side of the screen. I definitely have the cables connected properly etc and before I repaired it the phone had a cracked screen and there was a picture on it.
    I have tried hard reset and nothing. I have tried connecting to iTunes but it asks me to confirm on the iPhone which I can't do as there is nothing on the display.  I have tried randomly pressing all over the screen but it doesn't work. So I can't even try restoring it on iTunes.
    Please help any advice will be appreciated! I successfully have repaired iphone 4's and iphone 5 before but this is the first iphone 5c.
    Thanks.

    purplesunshine3 wrote:
    Please help any advice will be appreciated! I successfully have repaired iphone 4's and iphone 5 before but this is the first iphone 5c.
    Thanks.
    Since you were successful the last two times, I'm sure you will figure it out.

  • I purchased Macbook Pro i5 in March 2011. Now the screen has problem; one vertical blue line is in the screen (at the right side). I noticed this last week when I opened the MacBook, and now I am always seeing it. How to remove it?

    I purchased Macbook Pro i5 in March 2011. Now the screen has problem; one vertical blue line is in the screen (at the right side). I noticed this last week when I opened the macbook and now I am always seening it. I am seeing the blue vertical line always in the screen. However, I am not seeing this line when I open Word, Excel, PowerPoint files (without pictures). But I am seeing this line always when I see movies, pictures, and all the files which have pictures. Please do let me know how can I remove this vertical blue line (blue tint) pernamentally from the screen.
    Regards,
    Ujjal

    Backup your files to a external hard drive and disconnect.
    Call Apple and make a warranty call, then take it to the nearest Apple Store etc.
    You can run these things and it might clear your issue or give further informaiton
    Perform a hardware check
    http://support.apple.com/kb/ht1509
    Then see if resetting the SMC/PRAM resolve your issue
    http://support.apple.com/kb/HT3964
    https://support.apple.com/kb/HT1379

  • Permanent vertical blue line the screen and a red one has just popped up too. What does it mean and how can I get rid of them?

    I have had a permanent vertical blue line on the right side of my imac screen for some time now.  It does not affect the use of the computer.  A red one has popped up on the right side of the screen and is not going away either.
    Would you know why these are appearing and perhaps how to get rid of them please?
    Thank you in advance

    Best guess is that either your GPU or LCD is failing. You should take it to the nearest Apple Store or AASP for proper diagnostic. Once you know what the problem is you can decide wether or not it's worth repairing.

  • IMac 21.5" boots to white screen with vertical blue lines/bars then locks up

    iMac 21.5" (mid 2010) Intel Core i3 4GB RAM with Radeon HD 4670 boots to white screen with vertical blue lines/bars:
    Then it locks up after a few minutes, at which point the screen changes to white with these blue symbol things all over the screen:
    If boot to Safe Mode, it still has the white screen with blue lines/bars, but eventually loads the login screen and I can successfully login and get to the desktop, but even that has the bars/lines.
    Eventually, after enough restarts or hard shutdowns it will boot normally with no video/display issues. I've run disk checks, did the SMC and PRAM resets, checked logs (that I know of), and have even taken it completely apart, cleaned it out, reseated everything, put it all back together, but no change. I've read a few other posts about similar issues (but not quite the same video issue as this) where people had the logic boars replaced or reinstalled OSX, but that didn't always fix it. Any ideas? Has anyone seen this issue before? Thank you.

    crw4096 wrote:
    Is this a dead disk?
    Very well could be.
    If you can not startup from the Hardware Test, in Safe Mode or from > OS X Recovery  as discribed in the Support article's.
    Dig out the original Install Disc set that came with the iMac and do one of the following.
    1. Attempt to Repair the Hard Drive.
    Start from your Mac OS X Install disc: Insert the installation disc, then restart the computer while holding the C key.
    When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    Click the First Aid tab.
    Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    Select your Mac OS X volume.
    Click Repair. Disk Utility checks and repairs the disk.
    2. Run the Hardware Test from the second Install Disc.
        1. Insert Disc 2 and Startup holding the D key.
        2. Select the Extended Hardware Test.
    Then if you still can not get anything going, you need to contact your Local Apple Store or AASP and make a Service appointment.
    see > Apple - Find Locations

  • My macbookpro 15" screen has vertical blue lines

    Hello,
    I have a Macbook Pro 15" (mid 2010) 2.53GHz Interl Core i5 running OSX Lion 10.7.4.
    Generally the computer and screen are in good condition and have had no damage.
    The screen has Vertical blue lines and there is a tint of blue generally. The startup apple grey screen however is perfect, it is only when it enters the login screen that the lines appear. All the colours are off. Other than these lines the computer works perfectly 
    The computer was used yesterday (09 June 2012) without a problem for approx 1hour. It was then left for the day indoors on a desk out of direct sunlight. The computer was switched on later that evening and the problem started to appear
    I have already tried to reset the PRAM and SMC with no affect.
    I also read that it may be a cable problem, however as the startup screen works perfectly i question this.
    Please can you help!
    Thanks in advance,
    Alex.

    I suggest you take it to an Apple store genius bar or a repair facility for evaluation.  This is most likely a hardware problem.
    Ciao.

  • Thunderbolt display with vertical blue lines

    Hi All - My 2011 Thunderbolt display (connected to an early 2011 mbpro) is now displaying the dreaded vertical blue lines of old - any one else have any experiance of this?

    Hi askier,
    Thanks for visiting Apple Support Communities.
    You may find the steps in this article helpful as a starting point for troubleshooting the display issue you're seeing:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573
    Best,
    Jeremy

  • Vertical blue line won't go away ANYONE ELSE HAVE THIS ?

    I have a vertical blue line on my MBP display, only one pixel thick but all the way top to bottom. Location-wise, in the finder menu the line runs between the 'e' and 'l' of the 'help' option - about 4" from the left of the screen.
    The problem persists after a restart and stays there no matter which app I'm using. It's most noticable when the screen is displaying a darker image but when displaying a white/light/bright background (like the apple discussions) it's hardly noticable.
    Seems to me like I have a vertical line of dead pixels and it needs to go back to apple for a replacement. HAS ANYONE ELSE EXPERIENCED THIS PROBLEM? and can anyone confirm that this means dead pixels, I've never experienced it before.
    Thanks in advance for any replies.

    Hello there. This problem is definitely a defect in the LCD display. Take it back to Apple for repair. I have had this happen with an old iBook.
    If this helps you or solves your problem, please indicate this by clicking the appropriate icon in the header of this response.

  • Vertical Blue Lines - Please help!!

    I've got a G5 with 2 30" Cinema Screens. On my main screen there are often vertical blue lines that appear. I was told that this might be a graphics card issue and that I should unplug one of the screens. I've done that & if anything the blue lines are worse...
    Having done a search I've found some archived questions but they don't have any solved answers. Is my screen totally bust & needing to go back to apple or can I change some settings here?

    Could still very well be your video card. It probably has some bit addressing issues. Try swapping video cards with a friend or have the Genius Bar at your local Apple Store use a good video card to diagnose the problem. If the blue lines disappear, replace the video card.
    If the blue lines still appear on your displays, then run Apple Hardware Test and check for any error codes. Write down any error codes and bring them to your local Apple Store. Either way, you are looking at a display replacement and/or repair.

  • Electrical noise when a white background is displayed on the screen

    My iMac 27 mid-2010 got the LCD and graphics card replaced recently, due to the infamous dark spots on the display and some other video problems (vertical dotted lines on the screen).
    Those issues are fixed, but now I have a new problem that didn't exist before the repair:
    There is an annoying high-pitched electrical noise, but only when a white background is displayed on the screen. For example: When I open a blank page in Safari, the noise comes up. If I switch to another tab with a black background web page, the noise disappears.
    The noise is perfectly noticeable, and very annoying, when using the computer in a silent room. It is not related to display brightness, since it's always there no matter what brightness level I set.
    The Genius in the local Apple Store was able to hear it, so it's not a problem of perception. But he could neither find the cause nor solve the issue, so he returned the computer to me, with a vague 'its a normal noise, maybe caused by the CPU or the graphics card when they have to display white backgrounds'.
    Well, the thing is, this noise wasn't there before the LCD/graphics card replacement. I'm pretty sure about it, since I have been using this computer in a daily basis for the past two years and I know each and every noise that comes out of it.
    I would like to ask if any of you know of this problem. I've done a lot of searching in the internet, but couldn't find anything about this noise in particular.
    Thanks,
    Miguel

    Hi, thanks for your suggestion.
    Unfortunately, they have made up their mind about this issue. I even talked to the Store Manager, asking for a solution, but he pretty much ignored me saying he had full confidence in his team: if the genius says the noise is 'normal', then there's nothing more to discuss. Full stop.
    They just replaced a fan, which didn't solve anything, because the noise is clearly electrical in nature, NOT mechanical. I suspect it's related to capacitor resonance in the graphics card. The display and LED backlight panel seem to be OK, since the noise is not heard when I use the mac in target display mode via the mini-displayport input.
    I gave them this information in order to help with the diagnosis, but they didn't even bother to write it down.
    So far, the Apple Technical service seems very un-professional to me. I'm stuck with a defective computer for which I've paid 2.000 euros + Apple Care.
    Well, in this case, Apple doesn't Care at all. I can't even find an email address where I can submit a written formal complain.
    (Sorry for the rant)

  • Vertical Blue Lines Problem

    All my footage has these vertical blue lines across it, before and after exporting the video too. There's no reason this happened, it just randomly appeared after opening the project.
    Screen Grab
    http://dl.dropbox.com/u/632365/Screen%20Grabs/Screen%20shot%202010-03-08%20at%20 21.04.30.png

    I am having the same issue,
    I have a 15in MacBook Pro, Late 2011, 2.4ghz i7, 12gb ram, ADM Radeon HD 6770M 1024 MB.
    Im running Mac OS X Lion 10.7.5 (11G63b)
    This started happening yesturday (Jan 5th.)
    Are you still having this problem? I plan on taking mine into apple later today.

  • Horizontal blue lines are appearing on white screens.  Can I fix this?

    Horizontal Blue lines are appearing on my screen whenever the background is white.  Is this something I can fix?

    Hello Eliza,
    Thank you for the details of the issue you are experiencing with your display on your MacBook Pro.  I definitely understand your concern with this.
    I found an article with steps to troubleshoot issues with displays.  This article is for internal and external displays, so you can skip any steps referring to an external display.  I recommend reviewing the full article, but this step specifically stands out to me:
    Reset the system
    You can reset the Mac's parameter RAM and SMC.
    You can find the full article here:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • Problem in the code while fetching records and displaying in the screen

    Hi,
       I have developed a screen which is having various fields, all the records are stored in a ztable,when i enter the records into various i/o fields and press submit pushbutton they are stored in the table now, what i wont is when i enter one record the (primary one) and press enter the corresponding records of that record should be shown in the i/o fields means they should be fetched back from the d/b table and displayed on the screen. For this i Have written a code please see it once.
    TABLES : ZFISALDT.
    DATA ITAB LIKE ZFISALDT OCCURS 0 WITH HEADER LINE.
    ZFISALDT-BILLINGDOCU = ITAB-BILLINGDOCU.
    ZFISALDT-SALESDOCU = ITAB-SALESDOCU.
    ZFISALDT-FORM402 = ITAB-FORM402.
    ZFISALDT-SALESTAXFORM = ITAB-SALESTAXFORM.
    ZFISALDT-FREIGHTDOCNO = ITAB-FREIGHTDOCNO.
    ZFISALDT-FPARTYNAME = ITAB-FPARTYNAME.
    *&      Module  STATUS_5555  OUTPUT
          text
    MODULE STATUS_5555 OUTPUT.
      SET PF-STATUS 'SALALL'.
      SET TITLEBAR 'SAL'.
    ENDMODULE.                 " STATUS_5555  OUTPUT
    *&      Module  USER_COMMAND_5555  INPUT
          text
    MODULE USER_COMMAND_5555 INPUT.
    CASE SY-UCOMM.
    WHEN 'BACK'.
    LEAVE TO SCREEN 0.
    WHEN 'SUB'.
    IF ZFISALDT-BILLINGDOCU = ' '
    OR ZFISALDT-SALESDOCU = ' '.
    MESSAGE 'PLEASE FIRST SUBMIT THE BILLING DOCUMENT NO AND SALES DOCUMENT NO' TYPE 'E'.
    ENDIF.
    ZFISALDT-BILLINGDOCU = ZFISALDT-BILLINGDOCU.
    ZFISALDT-SALESDOCU = ZFISALDT-SALESDOCU.
    ZFISALDT-FORM402 = ZFISALDT-FORM402.
    ZFISALDT-SALESTAXFORM = ZFISALDT-SALESTAXFORM.
    *ZFISALDT-FREIGHTDOCNO = ZFISALDT-FREIGHTDOCNO.
    *ZFISALDT-FPARTYNAME = ZFISALDT-FPARTYNAME.
    *SUBMIT ITAB.
    WHEN ' '.   (THIS THE PART OF CODE WHICH IS NOT WORKING)
    SELECT * FROM ZFISALDT INTO corresponding fields of TABLE ITAB WHERE BILLINGDOCU = ZFISALDT-BILLINGDOCU.
    ITAB-BILLINGDOCU = ZFISALDT-BILLINGDOCU.
    ITAB-SALESDOCU = ZFISALDT-SALESDOCU.
    ITAB-FORM402 = ZFISALDT-FORM402.
    *ZFISALDT-BILLINGDOCU = ITAB-BILLINGDOCU.
    *ZFISALDT-BILLINGDOCU = ITAB-BILLINGDOCU.
    *ZFISALDT-SALESDOCU = ITAB-SALESDOCU.
    *ZFISALDT-FORM402 = ITAB-FORM402.
    *ZFISALDT-SALESTAXFORM = ITAB-SALESTAXFORM.
    append ITAB.                                                      (ALSO USED INSERT BUT NOT WORKING)
    WHEN 'ENTER'.
    IF ZFISALDT-BILLINGDOCU = ' '
    OR ZFISALDT-SALESDOCU = ' '.
    MESSAGE 'PLEASE FIRST SUBMIT THE BILLING DOCUMENT NO AND SALES DOCUMENT NO' TYPE 'E'.
    ENDIF.
    ZFISALDT-FREIGHTDOCNO = ZFISALDT-FREIGHTDOCNO.
    ZFISALDT-FPARTYNAME = ZFISALDT-FPARTYNAME.
    ZFISALDT-FREIGHTBILLNO = ZFISALDT-FREIGHTBILLNO.
    ZFISALDT-FREIGHTDATE = ZFISALDT-FREIGHTDATE.
    ZFISALDT-TRUCKNO = ZFISALDT-TRUCKNO.
    ZFISALDT-FREIGHTAMOUNT = ZFISALDT-FREIGHTAMOUNT.
    ZFISALDT-COMNAGBILL = ZFISALDT-COMNAGBILL.
    ZFISALDT-AGENTNAME = ZFISALDT-AGENTNAME.
    ZFISALDT-CAGDATE = ZFISALDT-CAGDATE.
    ZFISALDT-CMNAGAMOUNT = ZFISALDT-CMNAGAMOUNT.
    ZFISALDT-SHIPMENTNAME = ZFISALDT-SHIPMENTNAME.
    ZFISALDT-SHIPDOCUNO = ZFISALDT-SHIPDOCUNO.
    ZFISALDT-SHIPBILLNO = ZFISALDT-SHIPBILLNO.
    ZFISALDT-SHIPBILLDATE = ZFISALDT-SHIPBILLDATE.
    ZFISALDT-BLNOGOV = ZFISALDT-BLNOGOV.
    ZFISALDT-CHAAGENTNAME = ZFISALDT-CHAAGENTNAME.
    ZFISALDT-CHABILL = ZFISALDT-CHABILL.
    ZFISALDT-CHADATE = ZFISALDT-CHADATE.
    ZFISALDT-CHAAMOUNT = ZFISALDT-CHAAMOUNT.
    ZFISALDT-B_L_NO = ZFISALDT-B_L_NO.
    ZFISALDT-B_L_NODATE = ZFISALDT-B_L_NODATE.
    ZFISALDT-DEPBLICNO = ZFISALDT-DEPBLICNO.
    ZFISALDT-LICENCE_DATE = ZFISALDT-LICENCE_DATE.
    ZFISALDT-FOC_VALUE = ZFISALDT-FOC_VALUE.
    ZFISALDT-DEPB_VALUE = ZFISALDT-DEPB_VALUE.
    INSERT ZFISALDT.
    CLEAR ZFISALDT.
    ENDCASE.
    ENDMODULE.                 " USER_COMMAND_5555  INPUT
    This is the code please check it once.
    Thanks in advance.

    Hi Sumeet.
    WHEN ' '.  " (THIS THE PART OF CODE WHICH IS NOT WORKING)
    SELECT * FROM ZFISALDT INTO corresponding fields of TABLE ITAB WHERE BILLINGDOCU = ZFISALDT-BILLINGDOCU.     
    " here in where condition u r checking with ZFISALDT-BILLINGDOCU, i guess there is no value in that, Once check in debugging mode and proceed further.
    Regards,
    Aby

  • My iPhone has white lines going through half the screen and is locked. Is this a glItch or is it dead

    My iPhone has white lines going through half the screen and is locked. Is this a glItch or is it dead

    Hey there Yodude52,
    it sounds like you've got some unexpected graphical issues on your phone. This article provides details and tips that should help you get it sorted.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Pay close attention to these sections
    Display image issues
    This can include bright or dark pixels, lines in video, or sections of video missing.
    1.Try turning iPhone off and then on again.
    2.Verify the issue is not content related, by viewing different content.
    3.If the image is too dark, adjust the brightness. In General Settings choose Brightness and Wallpaper and slide the slider.
    Issue not resolved
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

Maybe you are looking for