Vertical dashed lines and bad shading on Satellite P30-109
Hi
Sorry for my bad English,
I have a TFT problem on my Satellite P30-109.
Regular vertical dashed lines and bad shading.
I have formatted the hard-disk with the recover-disk but nothing changed.
An irregular visualization is present while windows is starting.
What can it be?
Have you any suggestion? I have to discard my PC?
Thanks for your help.
Stefano
Can you connect your Laptop to an external screen?
If the lines will appear there too, then it might be a broken Graphics card.
If there are no lines on your externel screen, then your TFT screen might need replacement.
Either way, it'll need service from a Toshiba service center.
Is it more like this: http://www.laptoprepairguy.com/wp-images/reddish-screen.jpg
or like this? http://www.laptoprepairguy.com/wp-images/laptop-screen-vertical-lines.jpg
Regards
electrochain
Similar Messages
-
i was editing vacation photos in aperture 3 all of a sudden the thumbnail disappeared and now all i have is a vertical white line and an orange flag... how do i get my photo back? thanks
Hi Frank.
I have just had jb Atlanta's problem while adjusting the contrast on a photo. I was creating a slideshow at the time. After a lot of reading up I was about to give up when I tried restoring the file to its original settings as you suggested. Bingo!
However, that would only work for me, if I restored the settings while in the slideshow. All data had 'disappeared' when I attempted to open the photo in its original project folder.
Hope this is of help. Many thanks. -
The screen looks completely normal besides the vertical white lines on the right hand side of the screen, as the "slide to unlock" is lighting up and the time and date are changing, but the screen is unresponsive. After several problems with Apple in the last few months (and two defective iPods including this one and one iPhone), I really don't want to go through the whole process of bringing it in or getting a new one entirely. It would greatly help if someone knows a solution, even if that would require completely resetting the iPod to factory settings, as I have had is synced to iTunes before. It would be greatly appreciated if someone could help. Thanks.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. Seems like a bad digitizer or connection or logic board.
Apple Retail Store - Genius Bar -
Vertical grid lines and Dates on Graph
When I use date values on the x-axis for a graph, the only vertical grid lines that appear in the graph are at the year boundary. For example, if I was showing data for 3 years, I get 3 vertical grid lines; one at each January.
How can I get vertical grid lines at each month?
It will work if I convert the date to character, but then I lose the ability of Oracle Reports to fill in the tick marks for missing dates (say, if there isn't any data between January and March, the graph will still show a label for February).Hi, Ravens Fan.
Thanks for your reply.
Now, the main loop has a wait statement, but the problem remains. I'm using LabView 2009, and I didn't see this behaviour in the previous version, LabView 8.6.
I send you back the uptaded program, and two snapshots as well:
- snapshot 1: just after pressing "Run", "increment" value takes "maximum" value; due to this, there's only one text marker, at "12:00" (there should be one major grid line and one text marker every 10 minutes as "increment" value is set to 600 before entering the while loop);
- snapshot 2: when pannning, "minor increment" takes "maximum" value, and due to this, vertical grid lines don't show any more (there should be one minor grid line every 5 minutes as "minor increment" is set to 300 before entering the while loop).
Regards,
Francisco
Attachments:
1.jpg 309 KB
2.jpg 283 KB
XY-Graph. Time Axis problem.vi 14 KB -
JTree - dashed lines and + and - icons not visible
Hi,
I implemented a TreeCellRenderer for my JTree:
public java.awt.Component getTreeCellRendererComponent(javax.swing.JTree tree, Object value, boolean sel, boolean expanded, boolean leaf, int row, boolean hasFocus)
Object userObject = ((DefaultMutableTreeNode)value).getUserObject();
if (userObject instanceof Struct)
this.setLeafIcon(this.iconStructClosed);
this.setClosedIcon(this.iconStructClosed);
this.setOpenIcon(this.iconStructOpen);
else if (((DefaultMutableTreeNode)value).isRoot())
this.setLeafIcon(iconEmptyClosed);
this.setClosedIcon(iconEmptyClosed);
this.setOpenIcon(iconEmptyOpen);
/*else
this.setLeafIcon(iconDatatypeClosed);
this.setClosedIcon(iconDatatypeClosed);
this.setOpenIcon(iconDatatypeOpen);
return super.getTreeCellRendererComponent(tree, value, sel, expanded, leaf, row, hasFocus);
...the icons of the nodes are displayed correctly, but the dashed lines to visualize the level of a node and the + and - icons for collapsed or not collapsed nodes are not visible. I am using Windows LAF. What's wrong ?Please provide following information also:
1) Are you using the default images?
2) What is the Image URI?
3) Snapshot of the Structure window, property inspector window?
4) Are you using any switcher? -
My I mac 27 with vertical blue lines and work in save mode only?
My I mac 27 just works in save mode and with vertical blue lines. in normal mode it crash in botting and only the mose arrow move. Is it a hardward proplem and what is it?
EtreCheck version: 1.9.11 (43) - report generated May 23, 2014 at 3:26:05 PM GMT+3
Hardware Information:
iMac (27-inch, Late 2009)
iMac - model: iMac11,1
1 2.8 GHz Intel Core i7 CPU: 4 cores
4 GB RAM
Video Information:
ATI Radeon HD 4850 - VRAM: 512 MB
System Software:
OS X 10.9.2 (13C1021) - Uptime: 0 days 0:49:51
Disk Information:
ST31000528AS disk0 : (1 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
I Mac Drive (disk0s2) / [Startup]: 542.08 GB (373.66 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
I Mac Drive 2 (disk0s4) /Volumes/I Mac Drive 2: 457.13 GB (282.47 GB free)
OPTIARC DVD RW AD-5680H
USB Information:
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Internal Memory Card Reader
Configuration files:
/etc/hosts - Count: 20
Gatekeeper:
Mac App Store and identified developers
Problem System Launch Daemons:
[failed] com.apple.ucupdate.plist
Launch Daemons:
[not loaded] com.adobe.fpsaud.plist Support
[not loaded] com.adobe.SwitchBoard.plist Support
[not loaded] com.google.keystone.daemon.plist Support
[not loaded] com.microsoft.office.licensing.helper.plist Support
[not loaded] com.oracle.java.JavaUpdateHelper.plist Support
[not loaded] com.trusteer.rooks.rooksd.plist Support
[not loaded] com.zeobit.MacKeeper.plugin.AntiTheft.daemon Support
[not loaded] org.macosforge.xquartz.privileged_startx.plist Support
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[not loaded] com.adobe.AdobeCreativeCloud.plist Support
[not loaded] com.adobe.CS5ServiceManager.plist Support
[not loaded] com.google.keystone.agent.plist Support
[not loaded] com.hp.help.tocgenerator.plist Support
[not loaded] com.trusteer.rapport.rapportd.plist Support
[not loaded] org.macosforge.xquartz.startx.plist Support
User Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[not loaded] com.adobe.ARM.[...].plist Support
[not loaded] com.adobe.ARM.[...].plist Support
[not loaded] com.zeobit.MacKeeper.Helper Support
User Login Items:
smcFanControl
Garmin Express Service
iTunesHelper
Dropbox
Degrees
AdobeResourceSynchronizer
BitTorrent
Google Chrome
SpeechSynthesisServer
Internet Plug-ins:
o1dbrowserplugin: Version: 5.3.1.18536 Support
Default Browser: Version: 537 - SDK 10.9
AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 Support
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 Support
FlashPlayer-10.6: Version: 13.0.0.206 - SDK 10.6 Support
Flash Player: Version: 13.0.0.206 - SDK 10.6 Outdated! Update
iPhotoPhotocast: Version: 7.0 - SDK 10.8
googletalkbrowserplugin: Version: 5.3.1.18536 Support
AdobeExManCCDetect_x86_64: Version: AdobeExManCCDetect_x86_64 1.0.0.0 - SDK 10.7 Support
AdobePDFViewer: Version: 11.0.06 - SDK 10.6 Support
GarminGpsControl: Version: 4.0.4.0 Release - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.1 - SDK 10.6 Support
zako: Version: zako 1.0.0.0 - SDK 10.8 Support
JavaAppletPlugin: Version: Java 7 Update 55 Check version
Safari Extensions:
Open in Internet Explorer: Version: 1.0
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
Google Earth Web Plug-in: Version: 7.1 Support
3rd Party Preference Panes:
Flash Player Support
Trusteer Endpoint Protection Support
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
I Mac Drive: Disk size: 504.86 GB Disk used: 156.86 GB
Destinations:
I Mac Drive 2 [Local] (Last used)
Total size: 425.73 GB
Total number of backups: 7
Oldest backup: 2014-05-06 18:36:54 +0000
Last backup: 2014-05-23 12:02:15 +0000
Size of backup disk: Too small
Backup size 425.73 GB < (Disk used 156.86 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
13% update_dyld_shared_cache
1% WindowServer
0% Skype
0% fontd
0% System Events
Top Processes by Memory:
172 MB com.apple.WebKit.WebContent
168 MB softwareupdated
164 MB com.apple.IconServicesAgent
160 MB Safari
156 MB Skype
Virtual Memory Information:
559 MB Free RAM
1.86 GB Active RAM
1.12 GB Inactive RAM
483 MB Wired RAM
531 MB Page-ins
0 B Page-outs -
While accessing PAGES on my 27" iMAC computer, then screen suddenly displayed thick green vertical lines and then went to a whitish grey screen. Each time I shutdown and turn back on it shows the same thing and then goes to a blue screen. The last time I rebooted and I came to this site to try to problem solve. Any idea?
It sounds like a GPU problem, but I am not sure. Try booting in AHT (Apple Hardware Test) to be sure. Also, if you have another Apple computer, try to boot the other computer with the hard drive from the iMac using target disk mode. While booted on your imac's hard drive, check console for kernel panic logs. Paste only Kernel panic logs not application crash logs here please.
-
Satellite P30-109 Notebook suddenly turns off
Hi
I have a P30-109 Notebook. When I run heavy applications or something, it suddenly turns off... When I turn it on again, everything's all right. But then it can happen all over again any time. Anyone knows what to do please?!?Hello guys
I agree with you, David. It could be a overheating issue. Sometimes if the cooling ventilators cant work properly the temperature increase to the critical limit and the notebook shuts down. This is a overheating protection.
I suggest to check the ventilators and to clean it with a vacuum cleaner. -
Random Vertical red lines and banding
happy new year everyone,
I have recently bumped into as very annoying problem with my photoshop. It will randomly show red vertical lines on top of the image (see pic attached). This lines will sometimes dissapear when I zoom in/out or they will stay until re-open the image, so....
is this Photoshop (only noticed it since one of the last updates) glitch? or a grasphic Card problem?
Specs are:
i7 X980 3.33Ghz
24Gb Ram
W7 Pro
GeForce GTX 480 (with latest drivers)
thanks in advance!!Thanks!
there you go, there lots of info here!
Adobe Photoshop Version: 14.1.2 (14.1.2 20130923.r.427 2013/09/23:23:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:12, Stepping:2 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 6
Logical processor count: 12
Processor speed: 3340 MHz
Built-in memory: 24567 MB
Free memory: 21179 MB
Memory available to Photoshop: 22218 MB
Memory used by Photoshop: 64 %
Image tile size: 128K
Image cache levels: 1
Display: 1
Display Bounds: top=0, left=0, bottom=1080, right=1920
Display: 2
Display Bounds: top=0, left=1920, bottom=1080, right=3840
OpenGL Drawing: Enabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
NumGPUs=1
gpu[0].OGLVersion="3.0"
gpu[0].MemoryMB=1536
gpu[0].RectTextureSize=16384
gpu[0].Renderer="GeForce GTX 480/PCIe/SSE2"
gpu[0].RendererID=1728
gpu[0].Vendor="NVIDIA Corporation"
gpu[0].VendorID=4318
gpu[0].HasNPOTSupport=1
gpu[0].DriverVersion="9.18.13.3182"
gpu[0].Driver="nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um"
gpu[0].DriverDate="20131111000000.000000-000"
gpu[0].CompileProgramGLSL=1
gpu[0].TestFrameBuffer=1
gpu[0].OCLSupported=1
gpu[0].OCLVersion="1.1"
gpu[0].CUDASupported=1
gpu[0].CUDAVersion="6.0.1"
gpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="4.40 NVIDIA via Cg compiler"
gpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[16384]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[4]
gpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[192]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[32]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[32]
gpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[4096]
gpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[2048]
gpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[124]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
gpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
gpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
gpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=1
Serial number: 90970615815722860221
Application folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\
Temporary file path: C:\Users\GUILLE~1\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
D:\, 1.82T, 554.3G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Required\Plug-Ins\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Plug-ins\
Installed components:
ACE.dll ACE 2013/07/14-12:09:50 79.543790 79.543790
adbeape.dll Adobe APE 2013/02/04-09:52:32 0.1160850 0.1160850
AdobeLinguistic.dll Adobe Linguisitc Library 7.0.0
AdobeOwl.dll Adobe Owl 2013/03/03-12:10:08 5.0.13 79.533484
AdobePDFL.dll PDFL 2013/03/13-12:09:15 79.499517 79.499517
AdobePIP.dll Adobe Product Improvement Program 7.0.0.1786
AdobeXMP.dll Adobe XMP Core 2013/03/13-12:09:15 79.151481 79.151481
AdobeXMPFiles.dll Adobe XMP Files 2013/03/13-12:09:15 79.151481 79.151481
AdobeXMPScript.dll Adobe XMP Script 2013/03/13-12:09:15 79.151481 79.151481
adobe_caps.dll Adobe CAPS 7,0,0,21
AGM.dll AGM 2013/07/14-12:09:50 79.543790 79.543790
ahclient.dll AdobeHelp Dynamic Link Library 1,8,0,31
aif_core.dll AIF 5.0 79.534508
aif_ocl.dll AIF 5.0 79.534508
aif_ogl.dll AIF 5.0 79.534508
amtlib.dll AMTLib (64 Bit) 7.0.0.169 BuildVersion: 7.0; BuildDate: Mon Apr 8 2013 2:31:50) 1.000000
ARE.dll ARE 2013/07/14-12:09:50 79.543790 79.543790
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2013/07/14-12:09:50 79.543790 79.543790
BIBUtils.dll BIBUtils 2013/07/14-12:09:50 79.543790 79.543790
boost_date_time.dll DVA Product 7.0.0
boost_signals.dll DVA Product 7.0.0
boost_system.dll DVA Product 7.0.0
boost_threads.dll DVA Product 7.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.1.6.30929 2.1.6.30929
CITThreading.dll Adobe CITThreading 2.1.6.30929 2.1.6.30929
CoolType.dll CoolType 2013/07/14-12:09:50 79.543790 79.543790
dvaaudiodevice.dll DVA Product 7.0.0
dvacore.dll DVA Product 7.0.0
dvamarshal.dll DVA Product 7.0.0
dvamediatypes.dll DVA Product 7.0.0
dvaplayer.dll DVA Product 7.0.0
dvatransport.dll DVA Product 7.0.0
dvaunittesting.dll DVA Product 7.0.0
dynamiclink.dll DVA Product 7.0.0
ExtendScript.dll ExtendScript 2013/03/21-12:10:31 79.535742 79.535742
FileInfo.dll Adobe XMP FileInfo 2013/03/19-12:09:02 79.151561 79.151561
filter_graph.dll AIF 5.0 79.534508
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
imslib.dll IMSLib DLL 7.0.0.116
JP2KLib.dll JP2KLib 2013/02/19-12:28:44 79.248139 79.248139
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libiomp5md.dll Intel(R) OMP Runtime Library 5.0
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
LogSession.dll LogSession 2.1.2.1785
mediacoreif.dll DVA Product 7.0.0
MPS.dll MPS 2013/03/15-13:25:52 79.535029 79.535029
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
PatchMatch.dll PatchMatch 2013/06/11-12:08:08 79.542390 79.542390
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CC CC
Plugin.dll Adobe Photoshop CC CC
PlugPlugOwl.dll Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit) 4.0.1.34
PSArt.dll Adobe Photoshop CC CC
PSViews.dll Adobe Photoshop CC CC
SCCore.dll ScCore 2013/03/21-12:10:31 79.535742 79.535742
ScriptUIFlex.dll ScriptUIFlex 2013/03/21-12:10:31 79.535742 79.535742
svml_dispmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
tbb.dll Intel(R) Threading Building Blocks for Windows 4, 1, 2012, 1003
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 4, 1, 2012, 1003
updaternotifications.dll Adobe Updater Notifications Library 7.0.1.102 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 7.0.1.102
WRServices.dll WRServices Mon Feb 25 2013 16:09:10 Build 0.19078 0.19078
Required plug-ins:
3D Studio 14.1.2 (14.1.2 x001)
Accented Edges 14.1.2
Adaptive Wide Angle 14.1.2
Angled Strokes 14.1.2
Average 14.1.2 (14.1.2 x001)
Bas Relief 14.1.2
BMP 14.1.2
Camera Raw 8.3
Camera Raw Filter 8.3
Chalk & Charcoal 14.1.2
Charcoal 14.1.2
Chrome 14.1.2
Cineon 14.1.2 (14.1.2 x001)
Clouds 14.1.2 (14.1.2 x001)
Collada 14.1.2 (14.1.2 x001)
Color Halftone 14.1.2
Colored Pencil 14.1.2
CompuServe GIF 14.1.2
Conté Crayon 14.1.2
Craquelure 14.1.2
Crop and Straighten Photos 14.1.2 (14.1.2 x001)
Crop and Straighten Photos Filter 14.1.2
Crosshatch 14.1.2
Crystallize 14.1.2
Cutout 14.1.2
Dark Strokes 14.1.2
De-Interlace 14.1.2
Dicom 14.1.2
Difference Clouds 14.1.2 (14.1.2 x001)
Diffuse Glow 14.1.2
Displace 14.1.2
Dry Brush 14.1.2
Eazel Acquire 14.1.2 (14.1.2 x001)
Embed Watermark 4.0
Entropy 14.1.2 (14.1.2 x001)
Extrude 14.1.2
FastCore Routines 14.1.2 (14.1.2 x001)
Fibers 14.1.2
Film Grain 14.1.2
Filter Gallery 14.1.2
Flash 3D 14.1.2 (14.1.2 x001)
Fresco 14.1.2
Glass 14.1.2
Glowing Edges 14.1.2
Google Earth 4 14.1.2 (14.1.2 x001)
Grain 14.1.2
Graphic Pen 14.1.2
Halftone Pattern 14.1.2
HDRMergeUI 14.1.2
IFF Format 14.1.2
Ink Outlines 14.1.2
JPEG 2000 14.1.2
Kurtosis 14.1.2 (14.1.2 x001)
Lens Blur 14.1.2
Lens Correction 14.1.2
Lens Flare 14.1.2
Liquify 14.1.2
Matlab Operation 14.1.2 (14.1.2 x001)
Maximum 14.1.2 (14.1.2 x001)
Mean 14.1.2 (14.1.2 x001)
Measurement Core 14.1.2 (14.1.2 x001)
Median 14.1.2 (14.1.2 x001)
Mezzotint 14.1.2
Minimum 14.1.2 (14.1.2 x001)
MMXCore Routines 14.1.2 (14.1.2 x001)
Mosaic Tiles 14.1.2
Multiprocessor Support 14.1.2 (14.1.2 x001)
Neon Glow 14.1.2
Note Paper 14.1.2
NTSC Colors 14.1.2 (14.1.2 x001)
Ocean Ripple 14.1.2
Oil Paint 14.1.2
OpenEXR 14.1.2
Paint Daubs 14.1.2
Palette Knife 14.1.2
Patchwork 14.1.2
Paths to Illustrator 14.1.2
PCX 14.1.2 (14.1.2 x001)
Photocopy 14.1.2
Photoshop 3D Engine 14.1.2 (14.1.2 x001)
Photoshop Touch 14.0
Picture Package Filter 14.1.2 (14.1.2 x001)
Pinch 14.1.2
Pixar 14.1.2 (14.1.2 x001)
Plaster 14.1.2
Plastic Wrap 14.1.2
PNG 14.1.2
Pointillize 14.1.2
Polar Coordinates 14.1.2
Portable Bit Map 14.1.2 (14.1.2 x001)
Poster Edges 14.1.2
Radial Blur 14.1.2
Radiance 14.1.2 (14.1.2 x001)
Range 14.1.2 (14.1.2 x001)
Read Watermark 4.0
Reticulation 14.1.2
Ripple 14.1.2
Rough Pastels 14.1.2
Save for Web 14.1.2
ScriptingSupport 14.1.2
Shake Reduction 14.1.2
Shear 14.1.2
Skewness 14.1.2 (14.1.2 x001)
Smart Blur 14.1.2
Smudge Stick 14.1.2
Solarize 14.1.2 (14.1.2 x001)
Spatter 14.1.2
Spherize 14.1.2
Sponge 14.1.2
Sprayed Strokes 14.1.2
Stained Glass 14.1.2
Stamp 14.1.2
Standard Deviation 14.1.2 (14.1.2 x001)
STL 14.1.2 (14.1.2 x001)
Sumi-e 14.1.2
Summation 14.1.2 (14.1.2 x001)
Targa 14.1.2
Texturizer 14.1.2
Tiles 14.1.2
Torn Edges 14.1.2
Twirl 14.1.2
Underpainting 14.1.2
Vanishing Point 14.1.2
Variance 14.1.2 (14.1.2 x001)
Variations 14.1.2 (14.1.2 x001)
Water Paper 14.1.2
Watercolor 14.1.2
Wave 14.1.2
Wavefront|OBJ 14.1.2 (14.1.2 x001)
WIA Support 14.1.2 (14.1.2 x001)
Wind 14.1.2
Wireless Bitmap 14.1.2 (14.1.2 x001)
ZigZag 14.1.2
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash: NONE
Installed TWAIN devices: NONE -
Help! Dell 1355cnw Prints Vertical Colour Lines and Blotches
Question = Have I messed my printer drum and/or belt?
History = My 1355cnw recently started printing short vertical magenta scuff lines at the tops of each page over the same 15mm width in the same place each time. I cleaned the fuser with IPA and used the toner cleaning wand on the toners to no effect.
I the used an airduster to blow out all the dust and loose toner from all accessible angles/ holes in casing
Doing this prevented the paper pickup shoe from working as it had become contaminated with dust so i fed a piece of paper partially dampened with IPA into the printer via the tray printing a blank page - it came out dry but there are now scuff marks of all colours across the width of the page :o(
The first page printed of several blank pages also has repetitive colour toner coloured blotches up the page.
Post print opening the back door reveal toner on the transfer belt and the sponge grip wheel where i'm sure I haven't seen it before.
Additionally, since this incident i am now seeing scuff marks being transfered onto the non-print of the paper - presumeably from all the loose toner flying around.
I have printed out the 4 colour configuration chart and the drum refresh configuration chart and they both have the same sreak paterns down them (JPGs available) but they look a mess! They look like a grand prix started on them!
Have I messed my printer and if so which bits? Any and all help offered is greatly appreciated to cover my blushes in making the print issue 100 times worse!!
Thank
AndyReply much appreciated. Although I do not claim to have much knowledge of this type of hardware and software problems but they do give me a challenge. I have been trying various things. while I was doing this, switching the pc on and off, at one point the display on LCD came back.
When I checked the status in Device manager the error message,'WINDOWS HAS STOPPED THIS DEVICE AS WINDOWS HAS REPORTED PROBLEM (CODE 43) had disappeared and it said.' The device is working properly'!
I notice that the CPU temp rises upto about 51 deg C, the fan goes crazy (fast and slow)and the temp falls down and fluctuates between 27 and 48.
The screen goes blank again and come on some time and most times not!
To me it looks like that the chipset gives up when too hot.
I intend to open up the laptop and see if the GPU chip is seated, has good contact with its heatsink etc.
If anyone has any further suggestions, will be appreciated. -
Thin vertical black lines and somewhat blurry fonts
I was using the App store when all of a sudden my screen goes into a trange whitish background. I rebooted the laptop when when it came back on it is fuzzy in the fonts are a little blurry with small black lines running vertically across the entire screen. Could anyone help? Its a macbok pro 2009.
Take it in for diagnosis. A hardware problem cannot be diagnosed remotely.
Barry -
Satellite P30-109 doesn't run at power when AC adaptor is connected
When I unplug of the charger from the socket he goes automatically to battery: until now nothing wrong with it;
The point is that when I the plug back the charger in the socket he remains on the battery till when, after approximately 20 minutes with the high performance plan, begins to "pip" (battery less then 10%) and goes in "coma".
Normal discussed it should automatically go on net power and fill up the battery
Just after I shut it down, I disconnect the battery and connect it again then it begins to charge again.
The battery is not new, usage level according to Everest 65%; he lasts approximately 20 minutes on this moment for me more than enough. I just need to displace the pc from one room to the other for a presentation.
Even if I'd not use the battery I'd still have an issue: the plug to the rear side of the notebook is not really tight: sometimes it looses contact: without battery it'd abruptlly switch off.If hardware is not defective something like this should not happen. You can disconnect AC power supply 100 times a day but every time if the notebook is connected to AC power supply again the battery should be charged.
I can really not say what is wrong there but it can be some power supply electronic issue. It seems to be that this electronic is somehow confused. Sorry but just exact test by service can give more answers. -
Can Flash create dashed line with blunt not rounded dashes ?
Hi,
using Flash8
I can select line tool and dashed line in properties and draw a dashed line and get a line of sausages. How do I get a line of dashes without rounded ends to each dash ?
Line option has end caps option with None (gives straight or blunt tip to line, round gives rounded tip .
Draw a line with None and its got blunt ends, select it and choose dashed line option and it gets round ends to the dashes, the end cap option is greyed out !
Are dashed lines with blunt dashes now possible again with CS4, a forum poster also found that CS3 no longer gave blunt dashes ?
Why do I ask:-
I am trying to bring a map into Flash8 from Illustrator (Illus version 10 as it allows blunt tip lines to remain blunt it was said on the forum)... which has blunt ends to roads and has blunt type dashed lines. The roads remain blunt..GOOD !..but the dashed lines become what looks like a solid line. BAD !
I do a right click - break apart, then double click one of those now solid lines that should be dashed, and I am able to select a portion of the line, it is no longer a continual line as drawn in Illustrator. Properties shows it as solid line. Flash8 obviously having a problem with supporting Illustrator 10 dashed line then !
Select dashed in properties box and I get a portion of the line as sausage dashes, but working my way along the line doing each bit sees a far from correct dashed line result as sausages dont start stop evenly as each line is a separate entity and ignores the previous line.
Looks like I shall have to try and draw the line as one long line again in flash but unless I can give it blunt dashes when done, there is no point even trying that method, hence my question.
Would the latest Illustrator and Flash versions (CS4) allow blunt type dashed lines to appear in Flash ?
This is crucial for bringing maps into Flash.
EnvirographicsI noticed one problem with my solution.
If you look, very carefully, at the end of the stream, it's flat. Not rounded like it should be. After a bit of trial and error, I tried a different brush:
Note that, in addition to the rounded rectangle (done with the new corner controls in the latest version of Illustrator CC that just came out) and the three circles, there is also a rectangle, with no stroke and no fill, to provide a space at the end of the three dots. Here is the result: -
My iPad is a little less than a year old. While playing a game on my iPad, multicolored vertical lines appeared across left side of iPad followed by a black screen. After a few seconds the screen flicked back on....then a few more vertical colored lines and completely black screen again. Initially when pushing home button I heard Siri but after attempting several times to restart iPad, soon I no longer heard Siri and screen was just completely black and iPad seems to be dead. Battery was at 60%. I attempted to plug into wall and charge anyway, but that did nothing. I also attempted to plug into iTunes but iPad screen remains black and isn't recognized by computer or iTunes. (No apple logo shows up...nothing) Resetting by holding home button and reset switch for 10 seconds isn't working...I tried over and over holding both buttons for way over 10 seconds. Please help....is it dead? Anything else I can try on my own?
I have the same issue on my iMac 27" i7 late 2009 with ATI Radeon HD 4850.
Booting in safe mode is the only way to use it but the system can't do much and it's really slow.
From my findings it's for sure a GPU or VRAM issue so I've just bought a spare GPU board to replace the fault one.
Reballing could also solve this issue but usually you need also a new ATI GPU as well.
I'm not sure about nVidia GPU but it seems that you can replace it with a more powerful ATI Radeon HD 6970M card (if you use games to take advantage of it).
Your post is one year old and probably you already solved the issue so would be nice if you could share your solution for it.
best regards,
Franco -
Dashed line / dotted line coupon effect? FCPX
Seeing if anyone has any tips or tricks on how to create a dashed line type of effect around an object in a video, making it look like a coupon or like it was cut out of paper?
The line doesn't necessarily progress around the object in the video -- it can be a static layer. Though, if anyone DOES have tips on animating the lines, that could be cool, too!
Thanks in advance.Familiar with Motion?
Draw a short horizontal line. Select the Anchor point tool and drag the center to the right end of the line you drew. Replicate the line. Change the Arrangement to Outline. In the Cell Controls section, check the Align Angle option.
You will now have a dashed outline rectangle. You can publish the Size parameter and change the size of the rectangle with the Width and Height parameters from Size. You can increase the number of line segments with the Points parameter and you can animate the outline with the Offset parameter (but there's a catch.)
When animating the offset, you will have line segments extend "outside" the base rectangle shape briefly (since they are aligned to the side they are attached to, then snap to another side when the anchor point changes over from one side to the next.)
To get around that, you need to create another rectangle that is 100 by 100 and link the Scale X and Scale Y parameters (separately) to the Width and Height of the Replicator (in the Link behavior, set the Scale to 10 for both.) Drag the rectangle onto the Replicator in the Layers List and hold until you get the popup menu -- select Add Mask to Object. [PS -- you should center the Replicator AND the rectangle before adding the rectangle as a mask!] [You can create a square rectangle then select the Shape > Geometry tab and type in the exact points: (-50, 50); (50, 50); (50, -50); (-50, -50) to create the exact size you need.]
If the mask is perfectly aligned, you can now animate the dashed line and it won't look weird. You can change the width and height of the replicator and the mask will change in perfect synchronization.
You can also make the dashes longer or shorter by manipulating the Scale X parameter in the Cell Controls of the Replicator. If you made the original line white, you can colorize from the Cell Controls as well.
After that, you'll need to figure out if you want a solid color background; a drop zone or effect source/title background; what kind of text you want inside the dashed outline (or you can manually place a Basic Title in FCPX if you like); etc...
Hope this helps... If you need further help with this, let me know.
Maybe you are looking for
-
Fxp file issue in adobe bridge
Hello, I am posting here because I believe I have a small bug with fxp files in bridge. Basically, when I go thru Bridge to open an fxp file it opens in Flash Catalyst, but does not load the panels. If I go thru the program and open the project in Fl
-
In the smartform how to change the company adress in the standard form
Dear experts, In the smartform how to change the company adress in the standard form. Regards, Balakrishna R.V
-
URGENT: Removing element from a vector?
ok I have a text database where the lines look something like this: 5876,Tigger,50.00 7892,Piglet,25.00 my problem is I have to remove an element that I don't know the index of, so I figured I have to search the vector for the number(eg, 5876) and re
-
I can't figure out how to use my phone number and not my email for iMessage
-
***? Can anybody explain what i did wrong? 20 gig of music gone.
hi there, here is what happened: one macbook, two accounts. itunes library on an external harddrive. wanted to connect the other account on my macbook to the library, so i pointed itunes to the library, nothing happened. copied the itunes library fil