Vertical Grid Line in datagrid disappears

Apology in advance - this is sort of a long shot, but thought I'd try. I have a fairly large app that employs an AdvancedDataGrid component. When resizing a specific column (the second one to be exact), the separator between the second and third column disappears for a fairly small, but non null, range of widths of column 2. Any ideas of why that would ever happen? Unfortunately I don't have any code to show this and thus realize it'll be hard to help, but am open to suggestion as far as where to look...
thank you

Hi,
Refer this tutorial and compare the same against your code and make the modifications.
http://www.cflex.net/showFileDetails.cfm?ObjectID=552&ChannelID=1
HTH

Similar Messages

Vertical grid lines and Dates on Graph

When I use date values on the x-axis for a graph, the only vertical grid lines that appear in the graph are at the year boundary. For example, if I was showing data for 3 years, I get 3 vertical grid lines; one at each January.
How can I get vertical grid lines at each month?
It will work if I convert the date to character, but then I lose the ability of Oracle Reports to fill in the tick marks for missing dates (say, if there isn't any data between January and March, the graph will still show a label for February).

Hi, Ravens Fan.
Thanks for your reply.
Now, the main loop has a wait statement, but the problem remains. I'm using LabView 2009, and I didn't see this behaviour in the previous version, LabView 8.6.
I send you back the uptaded program, and two snapshots as well:
- snapshot 1: just after pressing "Run", "increment" value takes "maximum" value; due to this, there's only one text marker, at "12:00" (there should be one major grid line and one text marker every 10 minutes as "increment" value is set to 600 before entering the while loop);
- snapshot 2: when pannning, "minor increment" takes "maximum" value, and due to this, vertical grid lines don't show any more (there should be one minor grid line every 5 minutes as "minor increment" is set to 300 before entering the while loop).
Regards,
Francisco
Attachments:
1.jpg ‏309 KB
2.jpg ‏283 KB
XY-Graph. Time Axis problem.vi ‏14 KB

Interactive report showing vertical grid lines

Has anyone adjusted an interactive report so that it shows the vertical grid lines? I see the horizontal lines by default but I am thinking the vertical lines will make my data easier to read. Just can't figure how to do that.

Hello Edward,
@Jeff Eberhard has a good solution for showing vertical grid lines.
Here is the solution for whole grid for interactive report to be included in the Region Header/Region Footer/Page HTML Header:
<style>
table.apexir_WORKSHEET_DATA {
        border-width: 2px;
     border-spacing: 0px;
     border-style: solid;
     border-color: black;
     border-collapse: collapse;
table.apexir_WORKSHEET_DATA th {
        border-width: 1px;
     padding: 4px;
     border-style: solid;
     border-color: black;
table.apexir_WORKSHEET_DATA td {
        border-width: 1px;
     padding: 4px;
     border-style: solid;
     border-color: black;
</style>Hope it helps!
Regards,
Kiran

Spry table, vertical grid lines

How do you format a table so the vertical grid lines show up.
I have the roll over effect working for rows in the table, but the
tables are large enough that is can be difficult to follow columns
straight down. I would like black vertical line to appear between
columns.
thanks.

If I understand you right, you wish to have spreadsheet type
columns. In that case this is not a Spry question but an HTML and
CSS question.
In CSS the format would look something like:
#mytable th {
text-align: left;
padding: 3px;
font-weight: bold;
border:1px solid #AAA;
background-color: #EFEFEF;
In the above example I am formatting a heading cell.
In IE, if the cell is empty there will be no border, thus it
is best to populate the cell with a space as in ' '.
I hope this helps.

HT1414 My iPhone5 got a problem of getting automatically switched off and then automatically switched on. First i can see my screen getting faded to pinkinsh sort of color and then showing vertical grid lines. any suggestions?

My iphone5 got a problem of getting switched off and on automatically. I can see my screen getting faded and then i can see the pink vertical lines before it switches off. After about 10 seconds it switches on again.

Hi sumit1310,
Thanks for visiting Apple Support Communities.
I'd start with these troubleshooting steps:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Regards,
Jeremy

In Report I have a 2D axis system. How do I properly calculate the grid line interval for exactly 10 dots per tick

Having trouble getting the dots to line up correctly with the ticks of a 2D axis. I would like to have exactly 10 dots per tick. The programming is no problem. I set the D2AxisGridInterv variable after opening the 2D axis object. I can't seem to figure out how to calculate the number that results in exactly 10 dots per tick. I also have tried manually iterating to get 10 dots and have not been succesful. What is this number based from? It says as a percentage of the diagonal of the worksheet. I can get pretty close to 10 dots per tick, but it is always off just a bit. Is there really a way to get scientific based dots on a 2D axis so that the data can be analyzed from a printed plot?
Thanks-Ryan

Hi Ryan,
I'm not entirely sure what you mean by "dots", but I'm going to guess you meant grid lines set to dot display. In that case you can align the grid lines to the axis sub-ticks, then set the sub-ticks to invisible. The sub-ticks can be set to N of them per axis tick. Attached you will find an example of 10 dotted vertical grid lines per X axis tick.
Let me know if you meant something else,
Brad Turpin
DIAdem Product Support Engineer
National Instruments
Attachments:
Ryan37.zip ‏30 KB

Abode 7.0 Reader : Can I add grid lines ?

Hello,
I have large data files with more than 500 lines and many columns in PDF format. These are mainly text and numeric figures.
May I know if it is possible to add horizontal and vertical grid lines to the pages as in spreadsheets software ?
At present, I find it difficult to read the data correctly as the rows and columns are very close to each other.
Appreciate very much if somebody knowledgeable could give me advice.
Thanks
Low

[email protected] wrote:
> May I know if it is possible to add horizontal and vertical grid
> lines to the pages as in spreadsheets software ?
>
> At present, I find it difficult to read the data correctly as the
> rows and columns are very close to each other.
This cannot be done with the *Reader* which is just for reading
documents (as it names says).
It would have to be done in the *source* documents prior to publishing
them as PDFs.
Rainald

Abode 7 Reader: Can I add grid lines to pages ?

Hello,
I have large data files with more than 500 lines and many columns in PDF format. These are mainly text and numeric figures.
May I know if it is possible to add horizontal and vertical grid lines to the pages as in spreadsheets software ?
At present, I find it difficult to read the data correctly as the rows and columns are very close to each other.
Appreciate very much if somebody knowledgeable could give me advice.
Thanks
Low

While you are in the wrong forum, the answer is no. Users of Reader
cannot alter a pdf, except for form filling and commenting when allowed.
Mike

Printing excel grid lines

I just installed an HP All-in -One Desket printer, Envy 3350. I downloaded the software from the WEB as instructed. When I print an Excel spreadsheet with print grid lines selected, only everyother horizontal grid line is printed. All vertical grid lines print as expected. I have Windows Vista Home Premium as my operating system. I had no such issue with my previous DELL printer. I suspect there is a selection in one of the set-up options that needs to be checked/changed. I have tried to find such an option, but have not been successful. Any suggestions??

Hello,
Please click Printing Excel Gridlines Office 2007 to access the steps that should resolve the issue .
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Printing Horizontal Grid lines while Printing

Hi,
I am using the ALV to print some data, where in after printing I am able to see only the vertical grid lines and not the horizontal grid lines between each row. can somebody throw inputs on this as how to acheive the same. will appreciate for quick responses.
Jagath.

Hi,
I guess Sorting should help you to print Horizontal lines.
Sri.

How to have a vertical grid lineon the waveform graph indicator for every 10% percent of the maximum X axis value?

Hi,
how to have a vertical grid line on the waveform graph indicator for every 10% percent of the maximum X axis value, so the x axis will split into 10, the vertical grids line in total will be 11 (including first and last)
Example if the maximum X axis value is 11.56, first vertical grid is at the origin(0), second vertical grid is at 1.156 and continue to last one 11.56

Thanks JohnM and Evan,
the increment work great and i modify it to pass the 10% into "start" too, so it will start at the point of 10% of maximum range
attached file to let people download in future, if they met the similar situation
Attachments:
10percent.vi ‏31 KB

Grid Lines show up in certain print types.

HP Officejet Pro 8600 all in one.Imac OS 10.6.8When ever I print in black and white mode for any size or type document or when I print in color to a single 4x6 photo page the vertical grid lines show up on the print. I don't have this problem when I print the same 4x6 color photo on a full size 8x10 page. I don't have this problem whenever I print any document in color. I have deep cleaned the print heads and realigned the print heads several times; but I cannot lose the grid lines when I print in black and white and try to print color to the smaller format paper? I love this printer otherwise. Setup was easy, operation is user friendly, and it prints beautifully other than these two little annoying instances. Can anyone offer a solution?

Yes, I am experiencing this as well. Thin black vertical lines about 2.8cm apart. Initially I thought they were just on things sent to the printer from Photoshop, but now I see them on colour items I print directly from the copier and on an email attachment from my iPad. At times the lines are barely visible ant that is what happened when I was talking wiht hp support. It looked as though the problem had been solved after reloading the software onto my iMac. But afterI hung up with them it happened again and when I went back to look at the other prints the lines were there too but not very visible. I have cleaned and aligned the heads and replaced an empty yellow cartridge. I printed a blank white sheet that had no lines. I cannot figure it out. Any suggestions anyone?

I was editing vacation photos in aperture 3 all of a sudden the thumbnail disappeared and now all i have is a vertical white line and an orange flag... how do i get my photo back? thanks

i was editing vacation photos in aperture 3 all of a sudden the thumbnail disappeared and now all i have is a vertical white line and an orange flag... how do i get my photo back? thanks

     Hi Frank.
     I have just had jb Atlanta's problem while adjusting the contrast on a photo. I was creating a slideshow at the time. After a lot of reading up I was about to give up when I tried restoring the file to its original settings as you suggested. Bingo!
     However, that would only work for me, if I restored the settings while in the slideshow. All data had 'disappeared' when I attempted to open the photo in its original project folder.
     Hope this is of help. Many thanks.

Spark DataGrid - Turn off separators (grid lines) while using Grid itemRenderer?

I have a spark dataGrid. We have to use an itemRenderer to format numbers and column colors. When I apply a Data Grid Skin to remove the separtors (grid lines), the grid lines remain? It seems you can't have an itemRenderer and a Grid Skin at the same time ?? That sounds kind of foolish, however that's what I'm seeing?!?!
So, how can I get rid of the grid lines (separators) while using itemRenderers as well?

See http://forums.adobe.com/message/3795887.

Make Crop Grid Vertical Center Line Bold

When you do a rotate action and the grid pops up. I would love to see the vertical middle line a little bolder so you know which one it is. Specially useful in architectural photography.

3D ??
Hey Nanda Kishore,
It is not possible. Alternative is making client to view them in different way/view.
Try this:
1. Select Block/Chart
2. Properties: Data
3. Check : Show data markers
4. Check : Vary data markers
this way we can attract the Users. Hope it helps you.
Thank You!!
H2H

Vertical Grid Line in datagrid disappears

Similar Messages

Maybe you are looking for