Vertical images are fine in iPhoto, but don't display properly in aperture.

Hello everyone, i have an old project around 1000 pictures and all the images show properly in iPhoto. I have a shared library with aperture and when i open that project in aperture , all the vertical images seems to be destroyed as soon as i double click on them. It looks like an half downloaded jpg. None of the Previsualisation or the full screen display are correct. What's wrong ?

I had already tried it and it doesn't work "the selected element has been modified in iphoto and cannot be updated" (L’élément sélectionné a été modifié en externe dans iPhoto et ne peut être mis à jour.)
here are screencaps to show you what it looks like.
So everything is normal in iphoto, then I double click on an image in aperture and this happens, then the thumbnails are destroyed, and then in iphoto it is also destroyed.

Similar Messages

  • HT201302 I have a new iPod Touch and am trying to download photos for the first time.  Both iPhoto & Image Capture recognize the device but don't seem to recognize the photos, or at least I can't import them.  Nothing happens when I click on anything in e

    I have a new iPod Touch and am trying to download photos for the first time.  Both iPhoto & Image Capture recognize the device but don't seem to recognize the photos, or at least I can't import them.  Nothing happens when I click on anything in either.

    If you manually open iPhoto do you not see the photos?
    Maybe here:
    iOS: Unable to import photos or device not recognized as a camera
    Yu are trying to impoort photos taken by or saved to the iPod, right? If the photos were synced to the iPod then iPhot does not work.

  • I recently switched to Aperture. When I opened an image I imported from iPhoto, I don't have an option to edit it. Top of "Adjustments" tab says "image offline". How can I adjust Aperture so I can make adjustment to my iPhoto images?

    I recently switched to Aperture. When I opened an image I imported from iPhoto, I don't have an option to edit it. Top of "Adjustments" tab says "image offline". How can I adjust Aperture so I can make adjustment to my iPhoto images?

    I never tried importing from the iPhoto library as referenced images. I wonder if Aperture can access images stored in an iPhoto library package?  Even if it would work, it sounds like a bad thing to do.
    You might consider starting over and this time have Aperture manage the images.  That will copy them to the Aperture library, leaving the iPhoto library untouched. This assumes you have sufficient space to make a complete copy of all the images in your iPhoto library plus another copy of each image that Aperture makes as the preview image. You can then back up your iPhoto library (two backup copies, just to be sure) then remove it from your hard drive when you start getting too low on space.  As I write this I don't know where your iPhoto or Aperture libraries are/will be located so I'm assuming you have them on your HD.

  • How write a field to screen(report list) but don't display it ?

    Hi, All
        How write a value to screen(report list) but don't display it ?  Because i will use this value as the user click the current line ,but i don't want to expose this value to the user.

    Hi,
    U can Use the option NO-DISPLAY with PARAMETERS.
    Can write in the Selection screen statement with the syntax as
    Paramaters: <fieldname> type <data type>
                 value <value> no-display.
    -Rakesh

  • The internet pages don't display properly I'm using osx10.3.3, yahoo for example asks me to update, but I cant find out how to as the apple store just keeps sending back to the same page with no down load option...do i need to up date or is it just my mac

    The internet pages don't display properly I'm using osx10.3.3, yahoo for example asks me to update, but I cant find out how, as the apple store just keeps sending back to the same page with no down load option...do i need to up date or is it just my mac

    What Mac model do you have? You might be able to upgrade the OS to Tiger 10.4 or Leopard 10.5.
    Even browsers for Tiger 10.4 will get the update message.
    You could try a newer browser than Safari, which is obsolete, by downloading Firefox v2.0.0.20 at http://www.oldapps.com/mac/firefox.php
     Cheers, Tom

  • Why some fonts don't display properly

    I use Windows 7, Pagemake 7 (with update 7.01)
    Some fonts don't display properly in pagemaker file. Sometimes they look blank; sometimes display in part and the rest as blank. In fit-in Window view, sometimes a page displays properly, and next page is blank, go back to the previous page, it also turns blank. Some times letters look garbled. Display varies as and when the view size is changed.Example for the fonts - Souvenir LtBt . What could be the problem and what is the solution ?

    Pagemaker is old software, it was designed for use when fonts were quite limited. It will only display the first 256 characters in a font.  Modern fonts have moved way beyond this limitation. The solution is to stick with older fonts, or to upgrade to indesign. It does sound like your souvenir font  could be corrupted, running font management software is a good practice no matter what program you use.
    Jay

  • My songs are fine on iTunes but completely messed up on my iPod

    hey, ive gotta problem. when i listen to my songs on iTunes, not the store, but my library, they are fine. when i listen on my iPod, they are completely messed up! what i mean is that when played on my ipod, the beat (or rest of music besides the lyrics) is louder than normal, and i can barely hear the lyrics. whats going on and how do i fix it?
    thnx alot for the help

    Please set the EQ setting on you iPod to "flat". It does not help, please restore your iPod to factory settings
    http://docs.info.apple.com/article.html?artnum=60983
    Once completed, update your iPod with your iTunes

  • Images in RH Html are fuzzy; generated Help images are fine

    I am using RH 7.003.001. I have over 7000 files in my project. Recently the images in RoboHelp all appear fuzzy. They are fine in my generated project.
    I have 2 GB RAM and a 100 GB drive with 41 GB free. Disk Defragmentor says I do not need to defragment my disk.
    Anyone ever see this before? I have attached a sample image.

    Hi there
    I would examine the zoom setting of the editor. Sounds like it's something other than 100%.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • New topics are compiled in but don't display when help button is pressed

    Folks,
    I'm using RoboHelp HTML Build 6. I am the only writer who uses RH and have been using this build for 2 years or so.
    I recently got a new map file from the developer containing 2 new map IDs. I used the same steps to import the map file, create the new topics, and map them to the new map IDs that I have been using for years. But when I compiled RH and pasted the chm into the application folder, those 2 new topics don't display when the help button is clicked on the dialog box to which they are mapped.
    When I generate the chm I can look at the output at the bottom of RH project view and see that that the 2 new htm files are being compiled into the RH project. I can also see them if I open the generated chm and go into the TOC and click on a link to them.
    Does anyone have any ideas? I have tried redoing the usual procedure (see below) for the importing and mapping from scratch several times. I have also tried BugHunter (see below).
    Procedure for Importing and Mapping (this time the help for all the older dialog boxes works but not for the 2 new ones)
    1. Open the new map (.hm) file from the developer and add #define followed by a space to each entry beginnng with the string HID in the new map file (I don't know why but nothing works unless I do this.)
    2. Delete the old map file from the RH project.
    3. In Windows Explorer, copy the new .hm file into the RH project folder.
    4.In Project Manager view, open Context-Sensitive Help. Right-click on Map Files. Select Import. Browse and select the new map file.
    6. Map the new topics using File, Edit Map IDs.
    7. Generate the .chm and pasted it into the application where it always goes.
    BugHunter Procedures and Results
    I first tried the Test HTML Help API dialog.
    I specified the .CHM file I compiled and tested both options:
    --HH_DISPLAY_TOPIC: I put in the name of the new help (htm) file and its relative path and clicked Help. Nothing happened.
    --HH_HELP_CONTEXT: I put in the Map Number for the new dialog box and clicked Help. The new help topic I had created displayed.
    I also used the Tools tab in BugHunter to do a CSH (context sensitive help) Test. I identified the chm file and opened it and put in a new map number, then clicked Show Help. Nothing happened.

    Welcome to the RH forums.
    On the surface it sounds like you have done everything correctly so it should just be a case of going back and double checking that you have the correct CHM, that the mapid is exactly the same as in the app and that the app has been updated.
    Read the RoboColum(n) for a tips, tricks and musings on the Technical Communication Suite products.
    Follow the RoboColum(n) on Twitter

  • Can you sync photos to an iPad from both Aperture and Pictures Folder?  I know there are options for both but I have photos on both Aperture and Pictures Folder that I want to put on my iPad.

    If I select Aperture as the option to sync for photos I can't select photos from the Pictures folder.  Currently I have my photos synced to Aperture but I want to add photos from Pictures Folder.  It doesn't really look like it's possible to add stuff as it would delete my photos from Aperture if I resync with the Pictures Folder.  Really frustrating because I don't want to have to add those photos to my Aperture library as I'm currently moving away from using Aperture to Lightroom.  So all my older photos are in Aperture but most of my newer images are saved in my Pictures Folder.  Thanks for any help with this.
    Darci

    Hi Lawrence,
    Thanks for that... I thought of that, of adding my iPad Pix as a subfolder of Pictures and syncing to Pictures but I remember many versions of iTunes' ago that I could add folders. Can I still do that or has that option gone? If the option doesn't exist then I suppose I will have to use folders and subfolders.
    The thing is, I have iPad Pix as one folder then another folder of Pictures with various subfolders within it. It's a couple of those different subfolders I want to sync as well as iPad Pix and I don't want the hassle of moving and syncing specific folders etc... it really would be easier if I could sync more than one folder at the same time. Hope it's possible...
    Thanks,
    Maz

  • SVGs display locally, but don't display live online...

    Hi guys,
    Thanks in advance for your help in diagnosing and fixing! Over the past few days, been giving my portfolio site a long overdue rebuild; coincidentally just as Adobe introduced SVG support in Muse, which I wanted to / intend to take full advantage of.
    Here's what I'm trying to work through:
    - Initially I was saving vector work right out of Illustrator as an SVG -- tightly cropping the artboard, saving as an SVG, and placing into Muse. This placing into Muse worked fine at first, but then some weird behavior started, where the bounding box around the SVG in Muse was way wider / taller than the graphic itself, even though I had saved it out with a tightly cropped artboard. (i.e., the tight boundaries stopped carrying over to Muse.)
    - So, then as alternate way of doing it, I started to select / copy the graphic in Illustrator, and paste directly into Muse...this worked great! At least, for pasting directly into Muse.
    - Here's the big trouble: when I previewed my site locally in browser, the SVGs were displaying fine, but then when I exported the site and made live online, the SVGs don't show at all. They don't show in Firefox, Safari, Chrome, etc., and I looked at the live site on my new MacBook Pro as well as an aging PC laptop, and my iPhone. No show.
    Example page where SVGs aren't showing (just look for the empty spaces, where they should be): Digger Designs: Logo Design
    Help! Am I missing a piece of code needed for SVGs to display? Could it be my hosting (GoDaddy)? Some other issue? I could of course replace all of the SVGs with jpegs, but highly prefer utilizing SVGs, thanks!
    D

    A follow-up to this: yes, for the SVGs not displaying online (only locally), the fix with GoDaddy was to place an .htaccess file into my root directory, with this code in it:
      AddType image/svg+xml svg
      AddType image/svg+xml svgz
    Instructions at: http://www.w3.org/services/svg-server/
    Re: my other question about the oversized bounding box around placed SVG files, anyone know? I did see some chatter about this elsewhere the other day...
    Thanks!
    D

  • AS3 - Font Loads but don't display... what might be happening?

    I'm trying to load a custom font to use at runtime in AS3.
    The code seems to work but the font is not displayed properly.
    Could you point what I'm missing?
    [*]The SWF with the font item inside Library, which is
    exported with "GoodTimes" name, using "flash.text.Font" as the
    superclass.
    [*]FLA and its respective AS document class file. The code is
    quite simple, look:

    reseting the System Management Controller won't wipe my SSD drive will it?
    No, but if you don't already have a backup, you must back up immediately, before you reset the SMC or do anything else.

  • Album frames don't display properly: Since .MAC converted to MobileME help?

    ORIGINAL MESSAGE POSTED TO APPLE SUPPORT
    Ever since .MAC was recently down - and converted to Mobile Me - I have been having problems with my iWEB site:
    1. Frames around Photo Albums no longer display (on mac or win web browsers)
    - On Windows Computers - The Frames do not Display at all
    - On Mac (Safari or Firefox) they all look like see thru WIRE frames
    2. iWEB text box frames (that were once hidden) now seem to Display and
    they display in weir positions over and under other boxes.
    3. Safari Web Browser now ask to load certain fonts!
    4. Browsing my iWEB site is VERY VERY VERY SLOW!
    - From home
    - From work
    - over at friends
    In other words the speed of a persons internet connection does not seem to
    make any difference. It was all beautiful and fine before the transition, and now
    its slow.
    I have not done an upload to .MAC from iWEB for several months - so I don't believe it is anything I have done.
    My iWEB site is our FAMILY TREE site - so family members have been calling and telling me of the problems and the slowness over the past week.
    PS: I like the extra 10GB of storage, and the new Mobile ME features seem cool --BUT I MUST GET our family iWEB site running smooth once again.
    I have just recently upgraded to Leopard and for the most part everything is running fine - but as stated - I have NOT performed an iWEB upload using Leopard - the last was two months ago under Tiger.
    MacBookPro Intel Core Duo
    2.16GHz processor
    2GB RAM
    120GB Harddisk
    Mac OS X 10.5.4 (Jaguar - just installed July 7)
    Second posting to Support
    Hello,
    Ever since the transition - I'm still having the following problems with anyone trying to view my iWEB site (uploaded over 2 months ago before the Mobile ME transition).
    (of note: I performed the MobileME system update yesterday and that did nothing)
    1. Website redraw is VERY SLOW
    2. Text Box FRAMES are now Visible - when they were not before!
    3. Viewing my WEBSITE that I built using iWEB - the FRAMES applied to Photo and Movie Albums do not display properly as they did prior to the Apple mobile Me conversion. (see attached screenshot).
    As stated I have not done an iWEB upload for over two months - and everything was working fine until this Mobile me conversion. Now when viewing on Mac or Windows all of my Photo Album frames display improperly (they look like see through wireframes) when viewing in Safari or MS Explorer. NOTE: The albums will NOT display at all using FIREFOX.

    Since I recieved no responses I assume no one knows. Thanks anyway.

  • Altered graphics don't display properly

    I am running Lookout 6.2 on a small panel pc.
    I am using custom graphics which up to now display properly. I needed to make a couple of changes to the graphic, which was done on another computer then the exiting graphic was replaced with the new one, using the same name.
    Lookout displays the graphic but with messed up colour (greens are reduced to shades of grey) and the image is fuzzy. Untouched graphics remain ok
    Solved!
    Go to Solution.

    Thanks Ryan
    The resolution and colour were all correct, so I had the graphic re-drafted and this time it worked.
    Yet another mystery

  • Adobe Reader Shortcut Icons don't display properly

    Uninstalled and reinstalled latest version. Recently used program list on XP Home S3 Start Menu doesn't display Adobe logo and neither does Adobe Reader 9 shortcut on All Programs. PDF shortcuts display properly.
    Tried to search knowledge base and found no relevant articles. I can't believe you have to buy support for Adobe products.
    Thanks

    You can use Properties | Change Icon to adjust the icons on shortcuts.  Unfortunately this has to be done on each shortcut itself; it will not adjust all of them automatically.

Maybe you are looking for