Vertical lines of diffrent length in smartforms

Hi,
I need to draw vertical lines in smart forms where the Height of the line need to more in all pages except the last page where the Height of this line should be less.
If there is only one page then the heght of this line should be that of last page.
How to do it.
I have created two names as First Page and Next page.
Kindly guide me
Regards
Irfan

As for that it can be a faulty LED.
You must send the computer to the country you bought it from but you won't get it back for a couple of days, possibly up to a week.
I have more HP devices than you'd expect.
1 HP TouchPad 32 GB with Android
2 HP Touchsmarts (310-1000z and IQ527)
2 HP Printers (J6480 and J5750)
1 Laptop (HP DV6253CL)
Have at least some experience in each of those devices, and i'll do my best to help you.
Kudos if I helped!

Similar Messages

URGENT: vertical lines length in the Mainwindow in smartforms

hI,
In main window 4 vertical lines are there like.. below
item | material no.er | mat.desc | quantity | total price
| | | |
Now the problem is: these vertical lines entered into the next below window.. Now I want to reduce the length of these vertical lines.
Please explain where can I reduce to these vertical lines length.
Thanks and Regards,
Surya

Hi,
in the beginning of the report program:
report <program_name> line-size <give the length say eg:150>.
<b>reward points if useful.</b>
regards,
Vinod Samuel.

Regarding vertical lines smartform main window

hi all,
How can i draw vertical lines in Smartforms. I want vertical lines between columns in the main window and i want the lines from top to bottom even if i have just one record in the table data.
how can i solve this using table.
Please reply.
Regards
Rami Reddy

Hi Rami,
Refer these links.
Re: how to draw vertical line in a particular window
http://209.85.175.104/search?q=cache:phjbJwuDWssJ:www.zebra.com/id/zebra/na/en/documentlibrary/misc/sap_smartforms_technical.File.tmp/SAP_SmartForms_V3.pdfHowtodrawverticallinesinsmartform&hl=en&ct=clnk&cd=3&gl=in
Or table tab -> ypu will see a box for table pattern - > click on select
pattern and there u will find many options to draw lines!!!
below your table, you will have the header line type.
double click to select it.
on the right pane, go to attributes
click on the top left button here (select option) ...
in the popup, click the display frame button
select your choice
activate your smart form. this should work
Or
Even you can draw a window as vertical and specify its width as 0
.02.It will automaticall draw a vertical line of specified parameters.
Cheers
Mohinder Singh Chauhan

Smartforms: vertical lines

Hi
How can i do to have vertical lines between columns in a table node for all main even if i have just one record in the table data?
The same problem how can i solve using loop and template instead of table?
Thanks lot.
Matteo Vernile.

Thanks,
but my problem is: inside the main i have a loop for items of a document: i want that the vertical lines are drawn until the bottom of main even if i have just on item.
Now i set the border in template but vertical lines stopped at the last item, not at the bottom of main.
Thanks.
Matteo Vernile

How to set vertical line in SAPScript

Dear All,
I have to set vertical line at a particular position of SAPScript. Here the lines are of varying length. Can you suggest how to do that?
Line 1......................            | Vertical Line
Line 2.........................         | Vertical Line
Line 3...............                   | Vertical Line
Thanks and regards,
Atanu

Hii
use this
BOX WIDTH 0 FRAME 10
BOX HEIGHT 0 FRAME 10
BOX WIDTH 5 CM HEIGHT 1 CM FRAME 10 TW INTENSITY 10
BOX WIDTH 7 CM HEIGHT 5 CM FRAME 10 TW INTENSITY 10
HOPE THIS HELPS
Thanks & Regards
Naresh

One pixel vertical line on new iMac 24" display - defective?

I have a one pixel vertical line that is fairly constant on my new (one week old) 24" iMac -- it sits there between the Edit and View mens mocking me, and runs the length (well, height) of the screen.
I've tried changing resolutions and resetting the SMC and neither seemed to do anything. My guess is it's defective, so I'm probably looking at a trip to our nearby Apple Store... the only thing is, I don't want to be without my computer for an extended period of time, since I use it for work and everything.
Is this the sort of thing that the Apple Store could order the new part and do the swap in house? If they replace the whole unit, could I put the existing HD in it? (of course the defect shows up right after I migrate and do all my upgrades, installs and patches)

I recently just had the LCD on my 24" imac replaced due to a stuck pixel. Without even bringing my imac into the apple store i told one of the genius bar associates about my problem and they ordered the LCD without even seeing my computer. They then called me when it came in and i took it down there for it to be replaced. I took it on a monday morning and i went and picked it up on tuesday. It is an in house repair so as long as they are not super busy you should not have to be without it for to long. I would try what i did, go in their without your imac first and tell them your issue and see if they will order the part. That way your not leaving your imac there while they order the part in.

Vertical Line in a LineChart

Is there a built-in way to create a vertical line along a
lineChart? Or do I get to build it manually?
For an example, see the red line on the chart at...
http://trail.motionbased.com/trail/player/2232944
Thanks,
Jason

Hello Chitty,
There is no such key word to print vertical line in reports. In Script/Smartforms we can draw vertical lines. You should use SY-VLINE in side the LOOP. Then only you will get that.
Try this to get data into table format.
TABLES: mara.
DATA: BEGIN OF g_t_mara OCCURS 0,
        matnr TYPE matnr,
        spart TYPE spart,
      END OF g_t_mara.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
SELECT-OPTIONS: s_matnr FOR mara-matnr.
SELECTION-SCREEN END OF BLOCK b1.
START-OF-SELECTION.
SELECT matnr spart
    INTO TABLE g_t_mara
    FROM mara
    WHERE matnr IN s_matnr.
LOOP AT g_t_mara.
    AT FIRST.
      ULINE 1(24).
    ENDAT.
    WRITE: /1(1) sy-vline,
            3(18) g_t_mara-matnr, 19(1) sy-vline,
            21(2) g_t_mara-spart, 24(1) sy-vline.
    AT LAST.
      NEW-LINE.
      ULINE 1(24).
    ENDAT.
ENDLOOP.
Thank you.
Best Regards,
Sasidhar Reddy Matli.

Creating vertical line in pages

How do I include a vertical line in every page of my Pages document?

Pages '09 or Pages v5.2.2 (Mavericks), or Pages v5.5.1 (Yosemite)?
Pages v5+
Menu > View > Show Layout
Click the Shape tool in the toolbarChoose the line segment
Click the Arrange tab
Object PlacementStay on Page
Text WrapNone
RotateMake veritcal (90°)
Select the line
Choose horizontal position
Choose line length
Menu > Arrange > Section Masters
Move Object to Section Master
Deselect
Menu > View > Hide Layout
Done.

Vertical lines in table untill end of the window

Hi All,
I have created a table with 5 cloumn for item details in main window, but the lines are not running untill to the end of window size which i given .if i have 2 line items then the vertical lines stops at 2nd lines itself ,but i want it upto end of page.
Can you provide a solution for this.
Thanks,
Kumar

Hi Alex / Deesnath,
I can not able to do this. I assume that your solution targets for smartforms. If so I did as you mentioned. But I am getting the following error.
Table %Template1 does not fit into window.
I had to create a template in a window with same dimensions as and above the main window. My goal is to have a template for the entire height of the main window and use table to print values in the main window.
From your answer:
What is the line setting in main window?
How do you use line type in template?
Please help me.
Thank you,
Surya.

Vertical line in a report

Hi every body,
In a report I need to draw a vertical line using sy-vline up to a certain height.
i am writing d code like write : 50 sy-vline.Then it just draw a vertical line upto one row level.But I want upto the end of the page.
How can i draw vertical line upto a ceratin Height.Plz suggest.
Advance Thanks to all.
@Everyone: Please avoid responding to such
basic questions and keep the forums clean.
This issue can easily be resolved with a
little more effort by the user. Answering basic
questions or posting links is also treated as
an offense!
Edited by: Suresh Datti on Aug 24, 2009 12:36 PM

Hello Chitty,
There is no such key word to print vertical line in reports. In Script/Smartforms we can draw vertical lines. You should use SY-VLINE in side the LOOP. Then only you will get that.
Try this to get data into table format.
TABLES: mara.
DATA: BEGIN OF g_t_mara OCCURS 0,
        matnr TYPE matnr,
        spart TYPE spart,
      END OF g_t_mara.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
SELECT-OPTIONS: s_matnr FOR mara-matnr.
SELECTION-SCREEN END OF BLOCK b1.
START-OF-SELECTION.
SELECT matnr spart
    INTO TABLE g_t_mara
    FROM mara
    WHERE matnr IN s_matnr.
LOOP AT g_t_mara.
    AT FIRST.
      ULINE 1(24).
    ENDAT.
    WRITE: /1(1) sy-vline,
            3(18) g_t_mara-matnr, 19(1) sy-vline,
            21(2) g_t_mara-spart, 24(1) sy-vline.
    AT LAST.
      NEW-LINE.
      ULINE 1(24).
    ENDAT.
ENDLOOP.
Thank you.
Best Regards,
Sasidhar Reddy Matli.

Bold, vertical, line and inverted drawing created when using Penpad in Flash CC - Help?

Hello.
Just recently, whenever I use my VisTablet 465 Penpad Stylus and tablet to mark on the Canvas in Flash, a vertical line is created. The length of it is proportional to how horizontally centered the cursor is on the screen. When I try to move the cursor, the brush makes an inverted mark off the end of the line. I cannot find out how to stop it, and cannot draw anything sensible in Flash.
I contacted Flash assistance, and this was the conversation:
Vivek: Hi, Welcome to Adobe Support.
Vivek: Please give me a moment to study this case.
Martin Laight: Thanks Vivek.
Vivek: Are you using the latest version of driver for the tablet.
Vivek: Please make sure Flash pro version, Tablet driver version and Windows is up to date.
Martin Laight: Yes, we believe it to be 'Model A' driver from the VisTablet website
Vivek: This kind of issues requires the envolvement from engineering team
Martin Laight: As far as we can see all drivers are up to date. The pen pad works fine in Windows 7 Paint
Vivek: ok
Vivek: Please go to the link above and post the issue with tablet model, operating system details.
Please help if you can.

Hi,
The issue is resolved in the latest update of Flash Pro.Please update Flash professional to 14.1.0.96 .Follow the instruction below for the same :
Installation instructions
Log out and log in to the CC desktop application. Update the application when prompted.
You should see the list of new updates as soon as the new CC desktop application is launched.
Install Flash Professional CC and Mobile Device Packaging app. On a high speed connection, it took me around 8 minutes.
After the application is installed, you can launch the application directly from the desktop app by clicking on it.
Thanks & Regards,
Sangeeta

Use 40 black 1 pixel x 400 pixel vertical lines, and create an experimental composition using varying vertical spacing?

Ive been pulling my hair out on how to do this all day and im getting no where i dont even know where to begin! Please help if anyone knows how to do this.

enforcer4u,
she said posting here if help was needed was a good idea...
This is Classroom in a forum.
I believe the first line should have read Use 40 black 1 pixel x 400 pixel vertical lines, and create an experimental composition using varying vertical > horizontal spacing.
One way (she may be following this thread, you know) would be to:
1) create a horizontal/vertical (composition Three/Four) line with the Pen Tool with a length corresponding to the whole composition and two or more Anchor Points, ShiftClickDragging at each with different lengths of the Handles;
2) Create a vertical/horizontal line by ClickDragging with the Line Tool (or just Click with the Line Tool and set the Length and direction, then move a copy (ShiftAlt/OptionDrag the original, start dragging a tiny bit before you press the keys);
3) Object>Blend>Blend Options, set Spacing to Specified Steps, 38 steps;
4) Select the lines from 2) and Object>Blend>Make;
5) Select both the Blend from 4) and the line from 1) and Object>Blend>Replace Spine.
Other ways include creating the first line and then ShiftAlt/OptionDragging to create the other lines up/down/left/right depending on composition, or creating or all the lines (maybe using the blend) and then ShiftClickDragging individual lines.

Moving vertical line looks weird

I animated a vertical line moving horizontally. At slow horizontal speeds it looks fine, but at the speed I want it to move (about 600 pixels/second) the vertical line "breaks up" like a section of it is strobing. Changing the field order makes no difference.
Either it's a limitation of computer displays (I've tried it on other systems) or I'm doing something wrong with the animation itself.
You can DL the animation below. It's 640x480, 30 fps, MS MP4 encoded, and about 1 Mb.
http://www.heimhenge.com/downloads/Triangle.avi
Using AE 5.0 on W2K, 2.6 GHz AMD, 2 Gb RAM, GeForce 7800 GS.
Any suggestion would be most appreciated. Thanks!
Dan Heim

>If what you meant was that it requires more power for encoding (in a
>reasonable time), that would make sense. Do I understand? Or am I still
>confused.
Yes, it uses a lot of resources for encoding, but also upon playback. The point here is that while it has low data rates, MPEG 4 uses a bunch of computationally intensive tricks. This can be any combination of variable GOP lengths to non-square, adaptive block sizes. If you will, because the files contain very little "real" pixel information, a lot of CPU (or graphics card) power is spent on reconstructing from the compressed info. You will not see this that much at low resolutions, but if you ever downloaded e.g. one of the HD-res QT clips from Apple, you could see a lot of processor activity while playing them. You can find some good info on MPEG encoding on forums like Doom9. There is also some tech blurb explaining the principles and differences between various implementations on the developer sites for TMPEG, XviD and SUPER©. Beyond that you can of course always check the official docs from the MPEG licensing group or organisations such as ITU, but that may go way beyond what you are trying to understand. In relation to the Adobe Media Encoder, the decisive factor is the GOP length. You may wish to shorten it from the default 15frames to something like 7. Be aware, though, that this will unavoidably increase average data rates, regardless how you set them. Also use VBR encoding, if you can and have the extra time. if you can#t get decent results from within AE, simply export uncompressed and use one of the tools I was mentioning.
Mylenium

Help to eliminate the vertical line in replying to an email in iCloud on a Mac

I have searched for an answer to this without luck! Any help gratefully appreciated.
If I reply to an email, I get a blue vertical line the length of the received mail.
In subsequent strings the number of lines increases for each email, with text in different colours. With a message that has a number of vertical lines on the left side, I can't delete any of them to simply forward the email clean.
I don't use Apple mail, sending everything through iCloud via Google Chrome. I have looked at system preferences aswell as those for iCloud and Chrome without success. Previous posters have suggested unchecking the 'quote level' but I cannot find where to do this.
I have a Macbook Pro running 10.8.4. Thanks.

Hi,
In tcode SE80, select BSP Application and put SWN_MESSAGE1 in text field. So, you can see plain_indiv and plain_multi HTML. If you click-on this you can see the layout and the standard horizontal line.
If you want to change it, you have to copy this BSP and create a Z one and change the layout. Now, in tcode SWNCONFIG, go to Message Template and change BSP-URL.
Regards,

Vertical Lines at boot up.

Evertime I bootup I get the white screen with vertical lines. I try to reset the PRAM but holding down the keys doesn't do anything. I have reset the PRAM before with no problem but now that doesn't even work. I tried to even boot off the Mac DVD by holding down the c key and that doesn't work. I have been reading the forums and everthing points to reseting the PRAM but I can't even do that.
Does anyone have any idea of what else I can try? Mac support was no help, the wouldn't even give me phone support because I an 2 days past my 90 days of phone support. They told me to bring it to a store.
Any suggestions would be appreciated.

Sadly, I had this very same issue with "two" Macbooks.. One died 3 days after I got it, the other 2 weeks later. I finally returned it and bought a PC instead. I'm a college student and haven't got time to futz around w/ this stuff.
Each time I was at the Apple Store, I was "told" it was a failed logic board; I don't know, nor do I care what it was, except to say that it was not working.
AppleCare support was helpful and by resetting the PRAM, I was able to get in long enough to extract some of my data the first time around, but the last one died altogether w/ these vertical lines.
Sorry to disappoint you, but if you can get into your machine at all, backup your data and tell AppleCare that it's a "failed logic board" (like they told me) or take it to the store.
Good luck!
John
PS: That 90 days thing is complete b/s. HP offers unl. technical support for the length of your warranty.

Vertical lines of diffrent length in smartforms

Similar Messages

Maybe you are looking for