Vertical lines when printing a PDF

Software: Adobe Acrobat Standard 9.1.3.1 (German)
OS: Win XP Prof SP3
Printer: Lexmark C935
Hello Community
I have a strange problem: When user A tries to print out his building plans in PDF format on a Lexmark C935, there are vertical lines on the printout.
What I tried:
User A prints on another client: NOK
User B prints the same document: OK
Both users use the same printer with the same driver > shouldn't be a problem with the printer
User A has the same problem on another client > shouldn't be a problem with the client
Are there some user-specific settins that could cause these lines? I tried reinstalling Acrobat Standard, but it did not work...
Any comments / ideas are appreciated!
Cheers,
Simon

Try adjusuting your pdf page display settings (eg: turn off enhance thin lines).

Similar Messages

  • I have vertical lines when printing even after changing cartridges.

    I have vertical lines when printing even after changing cartridges. There are no lines when copying, faxing or scanning, only printing. I have cleaned the glass, scanner and even dusted where the toner cartride slides in.  Any suggestions?

    Sorry but I have worked on laser printers for over 20 years and never encountered your issue.  That is of course if you are explaining it correctly.  When you make a copy to be printed or print a reports page from the printer or send a print job to the printer, if in all these cases you get the line, then yes the issue is either the toner cartridge or the fuser.  If you make a copy to be printed and it prints without the line (Put original in adf, press copy button and print should come out), then you have one weird unit since it does not make sense since the print formatter on the unit whether making a copy or printing from the computer or unit itself uses the same hardware.  Now to test if the printed copy has a line then just put a sheet of paper on top of the feed tray and do a self test from the printer.  When the back edge of the paper enters the printer, quickly open the toner door to stop the printing.  Remove the toner cartridge and look at the image below.  If the defect is present the toner cartridge is the issue and if the image below does not have the defect, then the fuser needs to be replaced.  Best I can do.  Good Luck.

  • White vertical lines when printing

    Hi hope someone can help me I have white vertical lines when printing photo tried doing the usual cleaning etc but still there.

    Hi SandyWilkey,
    It is recommended that you contact live technical support .  There is NO charge for this call.  Real time feedback of a live technical support call would be very beneficial in this case.  Please dial 1-866-261-9362, Monday - Friday 10:00 a.m. - 10:00 p.m. ET (excluding holidays).  A Canon technical support representative will be able to resolve this issue faster.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • How can I remove vertical lines when printing from Aperture 3.2.2 to Epson Stylus Photo RX690?

    I have been generally quite happy with my access to and use of Aperture 3.2.2 (recently purchased) for import and manipulation of photos and movies, etc.I am using Aperture on a MacBook Pro OSX 10.6.8.
    However I have been unable to print high quality images on Epson premium glossy, glossy or matt paper on my Epson Stylus Photo RX690.
    High quality prints on screen show perfectly in preview, but all prints come out with good and accurate colours, but a series of vertical lines or bands of lines across the photo print.
    Using the Aperture Manual I have checked my settings in Aperture for the printer, for colour and quality of paper etc and they all seem to be correct.
    The Epson Printer is networked with a Toshiba (Vista) laptop which prints perfect results from Picasa and Photoshop with fine colour and no markings.
    I would appreciate any help please.
    Cam Opie

    Thank you Mark
    I thought I had done all the settings .....but no.
    I now have perfect prints. Easy when you know how!!!
    Cheers
    Cam

  • Cm3530 colored vertical line when printing

    When printing over a wireless network (entire office is wireless but printer is wired), printout have a verticle blackish, blue verticle line on the left side of every page.  It does not happen when copying or scanning only printing from any PC.  I have changed the ITB and transfer roller.  This helps for a few days/weeks but the problem comes back.  I hate to throw parts at it again, ie, formatter or DC controller but I don't know what else I should do.  Anyone have any suggestions?
    I have had this printer for several years and it is now out of warranty and issue has just started about a month ago.  Any suggestions is greatly appreicated.

    @Scificajun 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • [LaserJet Pro 200 color MFP M276nw] only vertical lines when scanning, scanner broken?

    Hi all! I have a problem with the scanner in my HP all in one. If I scan (using the printer function or apples ImageCapture: same result) the output is just a lot of vertical stripes (in colors when in color mode). Not a trace of the image I try to scan. The lines are there even if i scan an empty white page. I see the stripes both when doing a preview scan and an actual scan. The problems are very similar regardless of if I use the flatbed or the feeder scanner (they are separate scanner hardware, yes?). I have updated to the latest software for the printer/scanner and I am connecting over bonjour via wireless. I am on Os X 10.9.1. Anybody having similar problems or is my scanner just plain broken? Thanks in advance!Jon

    , , I understand that both of you are seeing vertical lines when scanning from your Laserjet M276nw. First, make sure the printer is plugged directly into a wall outlet and not a surge protector. Now, so I know where to begin I'd need to know the following:If you are seeing the vertical lines when you copy as well as scan?Are you seeing the vertical lines when you copy from the flatbed? The document feeder? both?If you are seeing the lines from both the flatbed and the feeder are they in the same place?Once I know this I'll be better able to assist you.

  • HP Officejet Pro 8610 bought 2 weeks ago. giving vertical lines while printing.

    Dear Sir,
    I bought new officejet pro8610 . 2 weeks ago. its giving vertical lines on printing any document from printer. scanner is absolutely fine just problem while printing and copying. i clear printhead few times. 
    i just check that when i am printing any paper from windows photo viewer,there are lines like this.
    but when i copy the same image in Ms Word 2007 and print it from there. the paper is clean without lines. its strange. while i have anyother printer HP Laserjet Color CP1025 attached with same computer . i print the same image from CP1025 from Windows Photo viewer, its clean from there without lines. can any one help me out from this issue

    Dear Sir,
    I bought new officejet pro8610 . 2 weeks ago. its giving vertical lines on printing any document from printer. scanner is absolutely fine just problem while printing and copying. i clear printhead few times. 
    i just check that when i am printing any paper from windows photo viewer,there are lines like this.
    but when i copy the same image in Ms Word 2007 and print it from there. the paper is clean without lines. its strange. while i have anyother printer HP Laserjet Color CP1025 attached with same computer . i print the same image from CP1025 from Windows Photo viewer, its clean from there without lines. can any one help me out from this issue

  • Text getting cut off when printing to PDF from Excel

    Hello,
         I've seen a lot related to this subject but nothing that shows a real solution.
         Using Excel 2003-sp3 and Adobe Acrobat v.9 Standard, the right half of the last character in the string gets cut off. It prints from excel fine.
         It's not always the text that is the right-most on the page either. An affected PDF file is attached - note the cut off "S" on the last line (NET ASSETS OF GOVERNMENTAL ACTIVITIES).
         Any assistance is appreciated.
    Thanks,
    Kevin Murphy

    please delete me from your mailing list.  tks.
    Date: Wed, 10 Feb 2010 11:20:28 -0700
    From: [email protected]
    To: [email protected]
    Subject: Text getting cut off when printing to PDF from Excel
    Hello,
         I've seen a lot related to this subject but nothing that shows a real solution.
         Using Excel 2003-sp3 and Adobe Acrobat v.9 Standard, the right half of the last character in the string gets cut off. It prints from excel fine.
         It's not always the text that is the right-most on the page either. An affected PDF file is attached - note the cut off "S" on the last line (NET ASSETS OF GOVERNMENTAL ACTIVITIES).
         Any assistance is appreciated.
    Thanks,
    Kevin Murphy
    >

  • Problem with page breaks in IE when printing to PDF

    Hey,
    I am having formatting issues with IE when printing to pdf, I have a dynamically created report which has page breaks at the end of each page, if I open this report(report is in html) in firefox and goto print the formatting is correct, if I open the same report in IE and print the report 80% of the pagebreaks are in tact, 20% are ignored which just makes the report look rubbish, my question is,( I know it not directly related to the reader but was unsure on which forum to post) is there a different css or formatting I should use to make IE play ball.
    Cheers
    Tom.
    the style I use to insert pagebreak is
    <code>
    .breakhere {page-break-before: always;}
    code I then use to implement it is.
    <TABLE BORDER=0 WIDTH=100% CELLSPACING=0 CELLPADDING=0 CLASS="breakhere">
    </code>

    You may use a forum for IE.

  • Adobe Acrobat 9 Pro do not open when printing a pdf document. Can anyone help?

    Adobe Acrobat 9 Pro do not open when printing a pdf document, instead I open it with Adobe Reader X to be able to print.
    Can anyone help?

    Hi Edna,
    It sounds like Adobe Reader X is your default PDF file handler. Launch Adobe Reader X.  Choose Edit > Preferences > General.  Click the 'Select Default PDF Handler' button at the bottom and choose Acrobat 9 from the drop-down menu.  Click Apply, then OK.
    Restart your computer.  Acrobat 9 should now be your default PDF file handler again.
    -David

  • Missing images when printing to pdf from Word

    When printing to pdf from MS Word 2003 in some cases textboxes and/or images disappear in the target PDF, depending on their position.
    Word and Acrobat Standard are the latest updates. If the Word text is converted on a Mac the target pdf has the images present, so it looks like it's a Windows only problem. Any suggestions where to start looking for a fix?

    You may have to turn on "display large images" in the preferences.

  • When printing to PDF from webpage, the pdf is compressed on the bottom of each page and markedly smaller print. How do I correct this?

    When printing to PDF from webpage, the pdf is compressed on the bottom of each page and with markedly smaller print, the top of the page is fine. How do I correct this?

    Open Contacts and click Preferences on the menu named Contacts. On the General tab of the Preferences window, select Show First Name: Before Last Name and then print. You can change that Preference back to the other way after printing if desired.

  • I have a user that has an issue when printing to PDF.

    I have a user that has an issue when printing to PDF. When printing to PDF the PC will intermittently freeze and sometimes the print spooler will crash taking all other printers offline. A reboot clears it up for a while but then it comes back.
    Acrobat 11 Pro
    Windows 7 x64
    Office 2010 Professional
    Any help would be great!  Thanks

    I manage a network of 30,000 + workstations all with Acrobat Pro 10.  Upon upgrading to 10.1.10, they all exhibited similar symptoms printing to the PDF printer.  The problem is most obvious in IE 11, it will cause the browser to stop responding, however it seems to depend on the page being viewed.  For example we can print google.com, but not yahoo.com.
    And of course there is no method to roll back to 10.1.9, other than to completely remove and re-install Acrobat.
    I hope this is getting addressed soon!

  • Remove grid lines when printing

    I am trying to print a set of financial statements and do not want to see the grid lines when printing the final document. I cannot work out how to do this.
    Some posts I have read say that grid lines are described as cell borders and suggest that they can be removed using the inspectors "cell borders " facility.
    I have tried to do this but cannot make it happen. If I were to successfully remove the borders/grid lines then surely this would also remove the underlines I have inserted with great effort.
    I would really appreciate anyone's help with this

    One more time, it's useful to use our brain before stating a task.
    If I read well, you used some cell borders as an underline segment.
    Now you pay the result of a bad design.
    You have no way to remove only borders which aren't "underlining" ones.
    Next time think before and use the Underline text attribute so you will be able to remove the grid easily.
    I know that some spreadsheets have two structures :
    grid
    borders
    But, those which took time to read the User Guide know that in Numbers there is a single structure :
    borders.
    So, remove or hide grid means remove or hide borders.
    When we work with a tool, we may ask it what it is designed to do, not what we guess it will be able to achieve.
    Yvan KOENIG (VALLAURIS, France) mercredi 15 septembre 2010 20:51:51

  • Bad crash when printing to pdf in Morningstar software - is it a 64 bit problem?

    Had bad crash when printing to pdf in Morningstar Principia Pro software - is it a 64 bit compatability problem? All other software I have can print
    to Acrobat pdf, but in Morningstar the Window 7 PC freezes and not even Task manager can
    unfreeze the computer. Acrobat worked fine in my old XP 32 bit PC when printing from Morningstar. Recently a webinar using
    an Adobe webinar software I was told I must only use a 32 bit browser, so I suspect Acrobat is incompaitble with my new 64 bit PC. Work around solution is to print to Microsoft XPS and then convert to Acrobat but I want to use Acrobat only! Is there a patch for people using 64 bit PCs?
    Can someone at Adobe respond to me, please? I have used Acrobat for over 10 years and am very loyal.

    Michael: I have tested other programs ability to print to Acrobat and also tested ability for other programs to
    export to Excel or Word. The only crash is when printing an Acrobat pdf from Morningstar Principia Pro I get a bad crash. The work around is to print to XPS and then convert the XPS file to Acrobat pdf. To get out of the crash which can't be fixed by Windows Task Manager shut down, is to open the printer file and tell the printer to delete the pending print job.
    I'm using latest Version 9.3.4 Standard Acrobat; Win 7 Pro 64 bit, 10 g of RAM, HPE 390t standalone PC, no networking.

Maybe you are looking for