Vertical Output Display

Can anyone please give me a bit of direction on how best output a vertical display using a mac mini on the a highdef 42" plasma screen?
I'm trying to use this for digital signage and information/direction you can give me would be greatly appreciated. Thanks!

I'm assuming you already have the plasma hooked up and running in landscape mode. In that case, go into Display Preferences and you should find an option to rotate the screen. If that option is unavailable, consider installing the ATI driver available for the Mac (original mini; not Intel mini) and that for sure will have a rotate option.
https://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&folder ID=299

Similar Messages

Help on output Display

Help on output Display
Thanks in Advance
ID ROUTE STRT_NAME BEGIN_DESCRIPTION END_DESCRIPTION OVERLAP BEG_MP END_MP Hierarchy
100899 CR ELM AVE EXT FUERA BUSH RD ELM AVE 1551 0 0.46 3
100899 CR ELM AVE ELM AVE RT 910A 1551 0.46 0.95 3
100899 CR ELM AVE ELM AVE DELMAR BYPASS 1551 0.46 0.83 3
100290 NY32 ELM AVE EXT RT 910A FEURA BUSH RD ELM AVE 1551 16.85 17.31 1
100290 NY32 ELM AVE ELM AVE DELMAR BYPASS 1551 17.31 17.68 1
My output will be Based on Hierarchy Max valuewhich is "3"
ID = Hierarchy Max value 3 =(100899)
ROUTE = Hierarchy Min Value which is "NY32"
STRT NAME = Hierarchy Max value (3) and Min of Beg_MP of Hierarchy Max value(3) = ELM AVE EXT
Begin Description = Hierarchy Max value (3) and Min of Beg_MP (0) of Hierarchy Max value(3) = FUERA BUSH RD
End_description =Hierarchy Max value (3) and Max of Beg_MP (0.95) of Hierarchy Max value(3) = RT 910A
Beg_MP = Hierarchy Max value (3) and Min of Beg_MP (0) of Hierarchy Max value(3) =0
end_mp = Hierarchy Max value (3) and Max of Beg_MP (0.95) of Hierarchy Max value(3) = 0.95
ID ROUTE STRT_NAME BEGIN_DESCRIPTION END_DESCRIPTION BEG_MP END_MP
100899 NY32 ELM AVE EXT FUERA BUSH RD RT 910A 0 0.95

CREATE TABLE TABLE_query(ID NUMBER,ROUTE VARCHAR2(30),STR_NAME VARCHAR2(30), BEGIN_DESCRIPTION VARCHAR2(300),END_DESCRIPTION VARCHAR2(300),BEG_MP NUMBER,END_MP NUMBER,HIERARCHY NUMBER,overlap number);
INSERT INTO TABLE_query(ID ,ROUTE,STR_NAME, BEGIN_DESCRIPTION,END_DESCRIPTION,BEG_MP,END_MP ,HIERARCHY,overlap)
values(100899,'CR','ELM AVE EXT','FUERA BUSH RD','ELM AVE',0,0.46,3,1551);
INSERT INTO TABLE_query(ID ,ROUTE,STR_NAME, BEGIN_DESCRIPTION,END_DESCRIPTION,BEG_MP,END_MP ,HIERARCHY,overlap)
values(100899,'CR','ELM AVE','ELM AVE','DELMAR BYPASS',0.46,0.95,3,1551);
INSERT INTO TABLE_query(ID ,ROUTE,STR_NAME, BEGIN_DESCRIPTION,END_DESCRIPTION,BEG_MP,END_MP ,HIERARCHY,overlap)
values(100899,'CR','ELM AVE','ELM AVE','DELMAR BYPASS',0.46,0.83,3,1551);
INSERT INTO TABLE_query(ID ,ROUTE,STR_NAME, BEGIN_DESCRIPTION,END_DESCRIPTION,BEG_MP,END_MP ,HIERARCHY,overlap)
values(100290,'NY32','ELM AVE EXT','RT 910A FEURA BUSH RD','ELM AVE',16.85,17.31,1,1551);
INSERT INTO TABLE_query(ID ,ROUTE,STR_NAME, BEGIN_DESCRIPTION,END_DESCRIPTION,BEG_MP,END_MP ,HIERARCHY,overlap)
values(100290,'NY32','ELM AVE','ELM AVE','DELMAR BYPASS',17.31,17.68,1,1551);
ID     ROUTE     STR_NAME     BEGIN_DESCRIPTION     END_DESCRIPTION     BEG_MP     END_MP     HIERARCHY     OVERLAP
100899     CR     ELM AVE EXT     FUERA BUSH RD     ELM AVE     0     0.46     3     1551
100899     CR     ELM AVE     ELM AVE     DELMAR BYPASS     0.46     0.95     3     1551
100899     CR     ELM AVE     ELM AVE     DELMAR BYPASS     0.46     0.83     3     1551
100290     NY32     ELM AVE EXT     RT 910A FEURA BUSH RD     ELM AVE     16.85     17.31     1     1551
100290     NY32     ELM AVE     ELM AVE     DELMAR BYPASS     17.31     17.68     1     1551
My output will be Based on Hierarchy Max valuewhich is "3"
ID = Hierarchy Max value 3 =(100899)
ROUTE = Hierarchy Min Value which is "NY32"
STRT NAME = Hierarchy Max value (3) and Min of Beg_MP of Hierarchy Max value(3) = ELM AVE EXT
Begin Description = Hierarchy Max value (3) and Min of Beg_MP (0) of Hierarchy Max value(3) = FUERA BUSH RD
End_description =Hierarchy Max value (3) and Max of Beg_MP (0.95) of Hierarchy Max value(3) = DELMAR BYPASS
Beg_MP = Hierarchy Max value (3) and Min of Beg_MP (0) of Hierarchy Max value(3) =0
end_mp = Hierarchy Max value (3) and Max of Beg_MP (0.95) of Hierarchy Max value(3) = 0.95
ID     ROUTE     STRT_NAME     BEGIN_DESCRIPTION     END_DESCRIPTION     BEG_MP     END_MP
100899     NY32     ELM AVE EXT     FUERA BUSH RD     DELMAR BYPASS     0     0.95
I figured out how to get id,beg_mp and end_mp
Can anyone help me getting the rest of data coumns please
--route,str_name,begin_description,end_description,beg_mp,end_mp,hierarchy,
select distinct max(id) keep (dense_rank last order by hierarchy) over (partition by overlap) ,
min(beg_mp) keep (dense_rank last order by hierarchy) over (partition by overlap) beg_mp,
     max(end_mp) keep (dense_rank last order by hierarchy) over (partition by overlap) end_mp
from table_query

WBS element field to Depreciation Simulation Report output display

Hi SAP Experts,
We need to Add the WBS element field to Depreciation Simulation Report output display (S_ALR_87012936)
Could please give your valuable inputs
Thanks
Hari Pothula

HI Javed,
We have capitalized with WBS element but not displaying in simulation report.
All configurations done in in ACSET and activation Account assignment objects
Thanks
Hari

How to redirect the output display on Ultra 5 box.

Hello,
Good day to you.
I have issues with redirecting display output to my console server (which is configured with cyclades switch) on a newly installed solaris 10, Ultra 5 box.
I could access the output display on the monitor when I connect it directly to the serial port. But I also have my parallel port connected to cyclades switch which is primarily being used for accessing multiple servers thro' one single console server.
When I try to access my ultra 5 box thro' console server, the display not getting redirected over there..I did checked the port from cyclades switch front, it did work well with other machines.
Looks like some work needs to be done at Ultra 5 box level so that the parallel port can send output signals to the respective port on cyclades switch and consequently to the console server.
Any thoughts ??
Thanks.

Hi,
Good day to you.
Apologize for quoting "Parallel" port. It is a in-built 25pin serial connector placed next to regular 15 pin serial port.
Just to make a point here, this 25 pin serial connector has an external converter attached with other side having RJ45 jack.
CAT5 cable connected between switch port to this RJ45 jack.
I did tested this converter with another machine and could able to access the display on my console server. So it seems to be the connectivity from serial port to switch port works fine.
Adding to that, this ultra 5 box with the current connectivity set up was working fine until I rebuild this machine. I was very well accessing this box thro my console server. There was no changes done except rebuilding the operating system.
I think some work needs to be done at the ultra 5 box level to get this 25pin serial connector to act.
Thanks.

Problem In report output display when i run in the background

Hi,
In a classical report i am printing around 17 fields the width of the report out put is around 800 characters.
If i run the report in the fore ground it running perfectly. But the thing is when i give large selection is it GETTING ' TIMED OUT ' as it is running more than an Hour.
so i wanted to run it in the back ground to avoid TIME OUT problems.
But when i run in the backgroud i am not getting full out put in the SPOOL request(SIZE of the report output may causing the problem) .
Pls come up with some solutions
Thanks in advance

Try increasing the spool length..
Refer this link for doing so.
Spool List output display > 255 char when the rpt is run in Background
Thanks
mahesh

For output display report is final_internal table or structure in wd ABAP?

Hi all,
for output display report is final_internal table or structure in wd ABAP?
in wd java output display report -.> CALLING rfc and that RFC OUTPUT table
finally in internal table is assigned to STRUCTURE .Same procdure?
Thanks,
RAMA

Dear Madhu,
thanks for guidence!
its showing popup tht this BADI ( ME_CHANGE_OUTTAB_CUS ) is only use for "SAP Internal use".
Regards,
Praphull

Bold font in report output display

Dear All,
Will any one let me know how to set BOLD font in the report output display?
Thanks,
Ranjan

<b>u cannot use this in 4.7</b>
REPORT ZFONT NO STANDARD PAGE HEADING LINE-SIZE 80 LINE-COUNT 65.
Start of print-control
NEW-PAGE PRINT ON.
PRINT-CONTROL FUNCTION 'SF000'.
WRITE: / 'This is CPI 20'.
SKIP.
PRINT-CONTROL FUNCTION 'SF020'.
WRITE: / 'This is CPI 6'.
SKIP.
PRINT-CONTROL FUNCTION 'SF008'.
WRITE: / 'This is CPI 12'.
Depending on your SAP printer device, this may also work
PRINT-CONTROL FONT 1 LPI 6.
you can try to change font and LPI numbers
WRITE: / 'font 1 lpi 6'.
PRINT-CONTROL FONT 2 LPI 6.
WRITE: / 'font 2 lpi 6'.
PRINT-CONTROL FONT 3 LPI 6.
WRITE: / 'font 3 lpi 6'.
End of print-control
NEW-PAGE PRINT OFF.
*--- End of Program

Delete modify in itab output display

hi,
i am create a query for delete data from database table by using an internal table i am delete data from DB table but a problem are come as in output display
i am showing the
NUMBER OF ENTRIES ARE DELETE FROM TABLE: 2
NUMBER OF ENTRIES ARE REMAIN IN TABLE AFTER DELETEION:
seletion screen contains
SELECT-OPTIONS: s_ordid FOR zapolp22-ordid,   "APO order id
                            s_matnr FOR zapolp22-matnr,   "Material Number
                 s_locto FOR zapolp22-locto.   "APO Destination location
PARAMETERS: p_days TYPE i. "Number of days
the problem are as:
if i am given only P-days parameter value 3
than it works as fine
showing output right as 2 rows are deleted
and 8 rows are remains in table
if i given all fields fill up in selection screen
as s_ordid----->4516 to 4517
    s_matnr---->85503 to 85505
   s_locto------> m100 to m101
p_days----> 2
then i get output display as
number of entries are deleted   2
number of entries are remain in table 0.
but the 2 rows are deleted from DB table and 8 rows are remain in table but it not show the 8 rows on display screen it shows zero.
my code is as:
DATA: lv_count TYPE i,
       lv_count1 TYPE i.
DATA: lv_date TYPE sy-datum.
SELECT mandt
       ordid
       schedid
       matnr
       locto
       lfmng
       lfdat
       locfr
       rqmng
       rqdat AS lv_date
       prckz
       blkstk
       oppdelqty
       zzapologmod
       zzflagurgent
       zzapottype
       zzndays_l_time
FROM zapolp22 INTO TABLE lt_output
WHERE ordid IN s_ordid AND
       matnr IN s_matnr AND
       locto IN s_locto.
SORT lt_output[] BY rqdat.
>Number OF Days to be Counted
lv_date = sy-datum - p_days.
LOOP AT lt_output.
IF lt_output-rqdat LT lv_date.
    MOVE-CORRESPONDING lt_output TO lt_delete.
    APPEND lt_delete.
    lv_count = lv_count + 1.
ELSE.
    lv_count1 = lv_count1 + 1.
ENDIF.
endloop.
DELETE FROM zapolp22 WHERE rqdat LT lv_date AND
                            ordid IN s_ordid AND
                            matnr IN s_matnr AND
                            locto IN s_locto.
IF sy-subrc = 0.
WRITE:/25 'Number of entries deleted            :', lv_count.
WRITE:/25 'Number of entries remaining          :', lv_count1.
ELSEIF sy-subrc NE 0.
WRITE:/ 'No data are selected for delete'.
ENDIF.
Tell me where in this code i do mistake.
Thanks jayant.

I don't know the contents of the table, but if you increase the number of restrictions in the SELECT statement, it will probably have lesser entries.
Now, you are not really counting the total number of rows left in the table, but the total number of rows in the table that match the criterion.
Basically, the first time (with lesser options) 10 rows are put into internal table, and 2 are deleted. So 8 are left.
In the second time, only 4 rows are getting selected, of which 2 are deleted, and 2 are left in the internal table NOT in the database table. In the database table, more rows are left (because they never got selected into the itab)
But if you want to count the total number of rows left in the DB, its better to count the number of rows in the end of the program with:
SELECT COUNT(*) FROM dbtab INTO lv_integer.
This can be pretty slow if the table is huge.

Re : ALV Output Display

hi
i'm doing an ALV Report. In the output i'm double clicking on the Document field using user-command
it is taking me to a particular Transaction and my requirement is if i change any field for ex : Description
in that transaction and come back again to the output display the Changed Description should appear
when i refresh the Output.how to get it?
Regards

1. create one icon on allication toolbar which is REFRESH icon, and give some function for it.
2. write the code like:
    CASE SY_UCOMM.
      when 'FCODE'.
          refresh itab.
          perform get_data.
          perform_displaydata.
it is nothing but u need to put the same code which u used earlier to show the data in output gaian after clicking on function code.
Regards,
Rajesh.

Download List output displayed

Hi Friends,
I want to donwload the list output displayed from the Report program with the exisitng formatting structure (displayed).
1)From SAP menu we can click on System > List > Save > Local file to download the file locally.
2) I want to obtain same functionality as mentioned in point 1 through a button on tool bar.
I dont want to prepare any internal table locally with the same data that is displayed on the screen, in the same formatting structure and Download, which is similar to a local download functionality.
Please let me know ur suggestions.
Regards,
Lavanya.

Then you have to display your O/p in the ALV   display ...
so that you can achive your requirement ..Because the ALV has the similar icon for downloading to pc ..etc
by Normal reporting you cannot get this Option .in the Application tool bar . one is there as you menioned
From SAP menu we can click on System > List > Save > Local file to download the file locally.
because   by pacing the icon in the Apllication bar it will not   call the path ..etc. you have to do the coding ...instead of that ALV is best .
But in the ALV   it is there in the standard ALV GRID    with   Downlaod icon , summation,scroldown ,sorting (A/D) ,etc...
reward points if it is usefull ..
Girish

Output display in alv

Hi,
i create a programm use alv but a problem occurs
in my output display there is a quantity field KONV-KBETR
o/p come as 100,00 (COMMA)
but i want it come as 100.00 it come in decimal
plz give me a solution for this.
Thanks,
ajay

>
ajay kumar wrote:
> plz give me codes notation for this i am not use user settings.
>
> thanks
> ajay
Why not with User Settings?
Else Press F1 on replace all occurances and code.

After Effects warning: couldn't set Quicktime video output display mode

After Effects warning: couldn't set Quicktime video output display mode
I'm getting this error when exporting video from after effects. I also get it when the program starts up. I'm using Windows XP. Cannot find anything about a fix anywhere. Does anyone know how to fix this?

Thanks for your reply. I profess ignorance regarding the GDI only mode and have no idea how to access that. Can you give me a little more info on that?
I am using an ATI Radeon HD 3850. I have two monitors on that card, Monitor one is a Trinitron HP 1130 CRT.(set to 1280x1024 16bit) The other is DVI wide screen Ilo 26 inch monitor. (1024x768 at 32 bit)
I have a BlackMagic Design DECKLINK standard definition broadcast card which outputs component video to a sony broadcast Beta deck. 480ix720 standard video.
The machine has a gigabyte motherboard. Intel Core 2 quad cpu 2.66 ghz
2.50 gb ram reported (4gigs installed)
These hasn't been a major issue as I can still output AVI uncompressed but it is annoying.
John

Spool List output display 255 chars

Hi,
I am execuing the my report in back groung.The oupt list has more than 255 chars.
could u please let me know how Spool List output display > 255 char when the rpt is run in back ground.
regards,
Rayeez.

Hello,
Try using the printer formatting as X_65_255.
Please check this [link|Report is truncating in background; for details.
BR,
Suhas

Strange behaviour in alv output display for a date column!

hi friends,
my alv output list display contains a column for budat (posting date), if this field has no value, then it displays a blank cell (space) in the output in my user login...but when the same report is run in another user login, even though the value of the column is null, it displays 00000000 (8 zeroes) rather than displaying a blank cell...i have set the field catalog property NO_ZERO = 'X'; is this property has anything to do with authorization to achieve its funcionality? am not sure...this is strange, as it is the same report, same field catalog that is being used..need some inputs on this
thanks in advance
Sathish

There are 2 solutions for an adhoc solution you can change the field to a char10 field, this will solve your immediate problem of the 0 display. For a permanent solution you can check the user profile setting for the date for you as well as the concerned user.
Hope That Helps
Anirban M.

Issue in output display in report,,

hi,
i have a report where i display a decimal value similar to other values, but this one is not displayed. I traced till the write statement and i do have the correct value in the variable. But this is just not displayed. what could be the issue. find below the code snippet.
WRITE :/5 'Mat',15 'Mat',50 'Caliper',60'Grade', 105 'Delv Qty',117 'EA' .      WRITE :/5 'Number',15 'Description'.
WRITE :/5   t_pick_view-matnr,
              15 t_pick_view-arktx,
              50 t_pick_view-caliper,
              60 t_pick_view-grade,
              105 t_pick_view-ea_qty,                      "#EC *
              117 t_pick_view-ea_unit.                     "#EC *
here the value in t_pick_view-ea_qty is available (7.0000) but not displayed on the report output. One thing I noticed is that the next value ea_unit (it has value ROLLS) is displayed but is displayed with a zero after that like 'ROLLS 0'. Seems the ea_qty value gets partially hidden (it is 7.0000). what cud be wrong ?
thks

Hi Vijay,
data definitions are all fine, as i said, i am able to see the value in the variable during debugging, but the write statement does not write it correctly on the page !!
now i found out another thing but still the issue is unresolved.
I commented the statement to display the next value , i.e. ea_unit (whose value is ROLLS) and now i am able to see the ea_qty displayed as 7.000.
It seems 7.000 is displayed, but then the next value overwites that location with ROLLS and bcos 7.000 is already displayed there, I get ROLLS 0.
But this is crazy as the display column positions are different for both but then why the first value 7.000 displayed under the second column ??
so now i changed the display position to 103 (instead of 105 )and i can see 7 popping up (7 from 7.000 )!!! any idea whats hapening ?? i hope u understood my explanation..

Vertical Output Display

Similar Messages

Maybe you are looking for