Vertical page swipe stutters

when testing on an ipad, my folio has a pronounced visual stutter each time i try to swipe to the next page. this only happens with vertical swiping, and if i specify horizontal, it's smooth. any suggestions?

I experienced this too. After touching an interactive element vertical scrolling stutters on first attempt. This post suggests the problem started in v22. I tested it in v24 today and the problem still exists. Can someone from Adobe shed some light on the issue?

Similar Messages

  • How to link the same horizontal page for two different vertical pages without duplicate them?

    Hey guys,
    Is there a way to link the same horizontal page on two different vertical pages without duplicate the horizontal page?
    I have a doublepage of a book splitted in two parts in different vertical pages but i want link the fullsized image in the horizontal page for both of them. Got that? hahaha
    Thank you all

    Confusing But interesing.
    I think it's possible. I have a idea. It will need one advanced trick.
    To explain it, I need test simply haha.

  • Cross tab sub report with vertical page breaks

    Hi have a report which contains 3 sub reports - different views of similar data. The sub report is wide enough to cover two landscape pages across and they run down over two pages
    The first subreport on page one does expand across into the secon landscape page, but does not repeat the row labels, although the settings in both main & subreport cross tab are to repeat
    The secon & third sub reports which print on the escon vertical page do not expand across to display any data, so I get no page four.
    They all have exactly the same settings.
    Is there any easy way to resolve this?

    hi Julie,
    this is i believe the nature of cross-tabs inside of subreports...horizontal expansion within the subreports is not a supported feature.
    you mentioned that the data is similar but just different views...is the query that each subreport runs off of bringing in the same record set? if so, is it possible to move the cross-tabs into the main report?
    are you using crystal reports 2008? if so, does changing the page setup for the entire report to a huge size and then the pagination for each section to landscape help?
    jamie

  • Buttons are triggering page swipe

    I'm creating a DPS app for younger readers. parents are meant to operate it with them, but kids would interact with it. On the last round of testing multiple times the kids would trigger a page swipe while tyring to touch buttons (the buttons control MSO's). Is there a fix or work around to this?  
    thanks in advance

    Yes, while trying to hit any buttons they are swiping to the next or previous page accidentally. It isnt sometimes, it's more often than not.
    has anyone else developed content for kids with DPS and run into the same problem?  I know many times people have requested the feature to diable the page swipe, but until that is an available feature I can't think of a way to disable the swipe and have any buttons.

  • Page swipe dosn't work with firefox?

    is there a way to make page swipe work with firefox? (to go forward and backward on web pages)_thanks.

    As my MBP pre-dates multitouch, I can't give step-by-step instructions. Best bet is to read through the Multiclutch site for instructions,or try the Firefox forums.
    I did find this with a Google search: "Go to System Preferences, then Multiclutch. Add Firefox into the list on the left. On the right, add the swipe gestures, swipe left pointing to Command+Left and swipe right pointing to Command+Right."
    Hope this helps...

  • 1 horizontal page between vertical pages

    I'd like to add one horizontal page in a document with vertical pages. I can only change all to vertical or horizontal but how can I achieve what I want? Or is it iWork that can't do this? (Microsoft Office is able to do this )

    Pages has the same size and orientation to its pages, throughout a document, which is generally a good idea, I'm not a great fan of the way Word does it.
    Pages does let you rotate the contents of a page and unrotate it for you to edit it. this may meet your needs.
    More expensive DTP apps let you have "spreads" which span several pages (as in a fold out section). Maybe some day Pages might do this.

  • In the vertical page with scrollable content, i can´t swipe to next article. why?

    in the vertical version of the page with one scrollable content frame, i can´t swipe to next article. the scrollable content frame has in both versions the exact size of the page. in the horizontal version this works perfectly. Used folio builder v22, pdf and smothscrolling off.
    Message was edited by: lost in dps

    Thanks for the answer. But i found out, that it was my fault. A status of an object was outside the scrolling content frame. But thank you for the possibilty to ask questions.

  • How to change default vertical page co-ordinates from center, to top?

    Hi There,
    We're having trouble understanding why InDesign centers the page instead of aligning the view to the top when switching pages (and copying and pasting) - and how to change this behavior.
    To understand what I'm talking about, do the following:
    Create a new document (any size)
    Use the page tool to to change the height
    Create a new page and use the page tool to make the height a lot taller
    Now switch between the pages
    Notice how InDesign always shows you the center of the page?
    This is frustrating in many situations like copying and pasting - try the following:
    Create a box on the first page and align it to 20mm from the top and 20mm from the left
    Copy the box
    Switch to the second page
    Paste using CMD + OPT + SHFT + P
    The object should be pasted in the same spot (20mm from the top and 20mm from the left) but it isn't - on the vertical, it's pasted relative to the center of the page for some reason.
    It surprising how annoying this becomes when you're constantly re-positioning pasted items or when switching between web layouts of different heights - it becomes a two step process instead of one.
    Does anyone know how to change this behavior?
    Any pointers in the right direction would be much appreciated - we're using CS5.5
    Cheers
    Ben

    Thanks for the replies - sorry I didn't reply earlier but they went to junk.
    Why in the same spot if pages have different size?
    In general, sure - but what about letting the user define a point of reference? For me, it's always the top left corner like the rulers - I completely understand if that doesn't work for others but it would save me so much wasted time constantly repositioning objects.
    Also, in a lot of documents with different page-sizes, setting the reference to top left (or whatever you set your rulers to) actually works a lot of the time - granted, probably only for those that use the numbers to position objects.
    Anyway, what I'd like to do is find out how to set a document-wide reference point for co-ordinates - obviously you can't do this right?
    Another thing that wastes time (in a similar vein) is the ability to set defaults for translation, rotation and flipping etc.
    Almost without fail, I find I want top left when moving (because I set rulers to top left) but center for rotation and flipping. Being able to set a default per translation type would save a lot of pointing and clicking.
    Is this possible?

  • How to combine two pages (not files) into one long vertical page

    Is there a way in Acrobat 9 Pro to combine (concatenate) say two 8.5"x11" pages and create a single 8.5"x22" page?
    Right now I'm having to do this by importing one page into Photoshop, extending the canvas, and pasting in the second page into the extended canvas space.  Very kludgy. While this works, saving the resulting PDF (even after removing the option to preserve editability in Photoshop) still results in a file which is a whopping 2.5MB in size as compared with around 25KB for the original PDF file which was spanning 2 pages.
    Ultimately what I'm trying to do is to be able to view a long document which was created in MS Word 2007 and then saved as a PDF, in a web browser by scrolling, without having page breaks.  Trying to increase the page dimensions is MS Word 2007 prior to creating the PDF worked to a point but Word 2007's maximum page length is 22 inches and as luck would have it, the document requires about 23 inches in length.
    I've tried using the custom page setting under the crop tool in Acrobat 9 but I can't seem to get the modified page dimensions to be accepted.  Acrobat 9 seems to accept the input and then nothing changes with the page's dimensions.

    A simple way to accomplish the job, though not recommended is to print the 2 page file to a new PDF with multi-up (assuming you select vertical rather than horizontal locations) and adjust the paper in the Adobe PDF printer to be 8.5X22. At least you might give it a shot. Some variation, along with rotation possibly, might work.

  • Displaying vertical pages in the portal

    Hi ,
    I am creating a portal file and want to render the pages in the book vertically
    rather than horizontal alignment.
    Pls. help me on this .
    Nidhi

    There is an optional attribute on the book called "orientation"
    you may set this to "top", "left", "right", "bottom". However it is up to the
    skeletons: book.jsp and singlelevelmenu.jsp (or multilevelmenu.jsp) to honor that
    property. Currently none of the skeletons do. You can write your own though, start
    by copying one of ours, and create a new look and feel that refers to your skeletons.
    "Nidhi" <[email protected]> wrote:
    >
    Hi ,
    I am creating a portal file and want to render the pages in the book
    vertically
    rather than horizontal alignment.
    Pls. help me on this .
    Nidhi

  • While using ibooks how to change page swipe from left to right vs top to bottom

    Somehow I changed a setting in my Ibooks to change page by scrolling from top to bottom of the screen. I want to have page turn by moving from left to right. I am using iPhone with operating 7. whatever is out at this day and time. Can anyone help? Thanks
    Celestesyorkies.

    tap the AA symbol at the top, the one for resizing text.
    It will show a slider for brightness, font size, page colour, and on the bottom "scrolling view" off and on.
    When the scrolling view is "on" (green) the book is read with a vertical slider and scrolling up and down.
    When the scrolling view is "off" (no colour) the pages are changed by swiping left to right or right to left.

  • Why do my Horizontal and Vertical page views stay the same?

    When I'm setting up a document, I want to view my pages vertically, not in a horizontal spread.  When I go to View Pages and click Vertical, and then go to Panel Options and click Vertical, the view should change, but it doesn't.  Is there anywhere else I need to check?  I uninstalled the program and then re-installed it, but that didn't fix it.

    OK. There's definitely a problem. In the screen shot I don't see brackets around the page numbers, but let's verify that page shuffling is enabled. Click on the leftmost pae in the pane, then hold the shif key and click on the rightmost page, so they are all selected, then right-click on them and make sure that BOTH Allow Selected Spread to Shuffle and Allow Document Pages to Shuffle are showing checkmarks.
    If shuffling is alread enabled (checkmarks show), then yes, you do need to trash the preferences. Here's the link again: Replace Your Preferences
    If you haven't done a lot of customizing, the keyboard method is OK, (you're going to lose customizations with either method, but you don't get to restore the old ones if it doesn't work when you use the keyboard). To learn how to find the hidden files, if you want to rename or move them, see Access hidden user library files | Mac OS 10.7 Lion

  • Sound On Page Enter Stutters A Few Times...

    I made a page transition thing with Tween and added sound. I
    used this script to make it play the tween when I enter any page..
    The problem is that when I enter a page I want the tween to
    start on frame 70. It plays the sound but somtimes it sort of
    sounds like its playing 2 or 3 of the sounds at the same time (
    only for a few milliseconds though. It sort of stutters for the
    first .2 seconds ) then plays through fine. This problem dosnt
    happen on all pages. I made sure i am not playing the sound
    anywhere else at any time when you click on that frame but i cant
    find whats causing it. Also, this dosnt happen every time, if I
    click the home link it will do it, then if I click it again it
    might not... Another problem is sound inconsistency, somtimes when
    I click on a link it plays the sound much louder then it did before
    and this also seems to be on a random basis.
    Also, my tween works fine. If I just play the tween its
    exactly as I want it ( also it plays the tween from frame 70 every
    page but it dosnt stutter on some ).
    And yes i did the "stop();" in the first frame.
    Whats wrong? Thanks

    I sort of know whats going on but i cant fix it. I have the
    motion and the sound all in one tween. For some reason when I put
    the tween onto the frame and remark out my code that says to play
    it. It dosnt play the motion but it STILL plays the sound... So the
    reason its studdering is because its playing the sound when it gets
    to the frame, then its playing it AGAIN when i actually code it to
    play the tween. I searched ALL of my layers and such for anything
    that may be making this sound play but i have no idea why its
    playing. Why is it automatically playing one part of the tween when
    im NOT even calling it? Thanks

  • How to create portrait (vertical) page layout in Captivate 8's Responsive Project?

    In Cp8's Responsive Project feature, the page layout for "Primary" and "Tablet" are landscape. What if I want to create slides of a portrait (vertical) layout? In the "Primary" (PC) layout, I've tried to dragged the border of the stage to the minimum width and the maximum height allowed. But it doesn't seem to me like the right solution.

    Thanks for your reply, Lilybiri.
    In Responsive Project, the default size of Tablet is 768(W) x 627(H), so, since the width is larger than the height, I thought that you'd want to hold the tablet horizontally in order to see the 768(W) x 627(H) (which appears to me to be landscape) layout. But now it occurs to me, after reading your message, that the 768(W) x 627(H) layout of the tablet is viewed by holding the tablet vertically, and that when the tablet is held horizontally, the layout is automatically switched to the Primary view. Is that so?
    The reason I want to change the primary view to portrait is that I want to create a tutorial based on some PDF pages which are in portrait layout. I convert those PDF pages to individual images using Acrobat Professional, then import them into Captivate. But I realize that the viewers would have to scroll down to see the lower part of the page.

  • Safari Pages Swipe

    After upgrading to Mavericks, I am unable to swipe the Safari pages anymore.
    Does somebody have a fix for this ?

    It probably was turned off during setup (not by you).  Go into System Preferences/Trackpad (Or mouse), then More Gestures.  Check first entry for "Swipe between pages".

Maybe you are looking for

  • I I cannot sign out of my comcast email in Firefox but I can do so in IE.

    My husband and I each have our own email account on Comcast email. We almost always use Firefox to open it. Suddenly, I cannot sign out of my email account on Firefox. I click on sign-out, then click on sign in, but the email automatically goes to my

  • IStore Images Batch Load Issue

    Hello All, We have been working on setting up a Batch load for product images for our iStore and have run into an issue. First off, this is more of a batch association since we are using already existing items. The issue we are having is that we are

  • Space under flash movies

    Hi All, I am having an annoying problem:  when I use swfobject code to embed flash movies, it leaves a space under the movie that breaks the design.  This happens when viewing it in Chrome or Firefox (on a mac), but not in Safari.  I have found that

  • Viewing a report using integrated security for connection to database

    PLEASE HELP!! I am able to connect to an SQL Server 2008 database from the Crystal Reports Designer using integrated security and can succesfully load the database to create my report with.  I provide the following parameters at connection; Connectio

  • Accessing audio CD information

    Some months ago i've tried to implement a small Java application which can query the freedb.org database to request audio disc information like artist name, disk title and track titles of audio CDs. After implementing the algorithm for computing the