Vertical pictures become horizontal after being imported

I imported pictures directly from my picture folder. I need the vertical pictures to stay vertical, but many of them, not all of them, become horizontal after being imported into iMovie 06. How do I correct this?
Thanks for your help.

Thanks for responding. Do you know how to correct this problem so that vertical images stay vertical?

Similar Messages

HELP!!??? Trouble with PS CS-6 displaying/ producing grainy and pixelated images after being imported using PS Bridge and Camera-Raw 8.5

Help!??? I am having trouble with PS CS-6 displaying/ producing/ saving grainy pictures when import NEF files!!!
Hi all,
When I import all NEF or RAW files into CS6 from Bridge and Camera Raw from the Nikon D200 and D5000, they become grainy/ pixelated. However, RAW files from the D800 did not have problem. I set the Color Space in my Nikons to AdobeRGB, in PS Camera Raw 8.5 to AdobeRGB, in PS CS-6 ColorSpace to AdobeRGB, and Save As Jpeg with Max quality (12). When comparing between CS-6 produced file and the original, I can see a big drop in quality and the picture become grainy and pixelated. What can I do to make this right? Any help/ suggestion is appreciated.
Thank you!
HN

Can you show us a screen-shot of the raw in Camera Raw that shows this noise, or if you only see it in the saved JPG, then show us a side-by-side of the raw in Camera Raw and the JPG? Show the same area of the photo and zoom to 100%.
It is normal for raw photos to have grain but you can mostly remove it with the Luminance Noise-Reduction sliders in the Detail tab of Camera Raw.
The amount of grain depends on the ISO sensitivity setting on the camera.

Why do my pictures become blurry after exporting from lightroom 5?

My pictures become somewhat blurry or not as sharp after I export them from lightroom 5. PLEASE HELP!!!

If you are looking at your exported pictures in preview.app than that is the culprit. It uses an extremely poor downscaling algorithm for displaying large images and will make every large image, no matter how sharp originally, display blurry. In preview you can hit command-0 (that's a zero) to make the image display 1:1 to see the actual detail. Make sure you have it's preferences in the images panel set to "Define 100% scale as 1 image pixel equals 1 screen pixel". I think in older Mac OS X versions, it was called something like ignore image dpi for display or so but I don't remember. You can also make sure to downscale (with correct output sharpening in the export panel) upon export from Lightroom. If the exported image is smaller than the display, Preview should display 1:1 by default upon opening.

Realtime effects become jerky after being rendered for 24p HD video

Hello,
Any one comes across that for 24p HD Video clips, e.g. just adding a "cross-dissolve" as the transition between two clips (I have tried both uncompressed and ProRes 422 HQ). Before rendering, the realtime effects (green in color) plays perfectly across. However, after render realtime or render all, we find that there will be once that the video becomes jerkly about at the "out" point of the "cross-dissolve". The same result to the video recorded when "print-to-video" or "edit-to-tape".
The only work-around is to either export the whole sequence to a quicktime movie, OR adding a dummy "Quicktime" effect filter into the both video clips and render all effects. Both methods are very time consuming, as it is video footage
Also, this problem seems happen to 24p only, not 50i or 60i. I wonder there is any error in calculating and making the render file of the effect for 24p.
Software configuration:
10.4.10, Final Cut Pro 6.0.1, Quicktime (most updated), KONA3 driver 4.0 (actually this problem happens to BMD MultiBridge/DeckLink Systems too)
Is it a "known" bug in FCP? or anyone get similar problem but have a solution to it?
Thanks.
Regards,
Golden

Hmmm....odd. I only saw this with P2 footage that was imported with FCP 5.0.4 and used in projects since upgraded to FCP 5.1. That little jitter at the end. I had that. I had to reimport all my footage under FCP 5.1.1 and it went away.
But that is NOT what you are dealing with...same issue, different footage, different version of FCP.
Got me.

Photos not showing up in photo stream after being imported to iPhoto from a DSLR camera?

I have a DSLR camera and for the longest time, I would import photos from a shoot to iPhoto and after about 20 minutes they would have all shown up in my photo stream on my Mac and my iPhone. But recently, the photos will not show up on either photo stream and trying to share a new photo stream with myself never works. Help?

Hi there,
I would recommend taking a look at some of the troubleshooting steps found in the article below.
iCloud: Photo Stream troubleshooting
http://support.apple.com/kb/ts3989
Hope that helps,
Griff W.

Playlist after being imported to tablet does not show track numbers?

After importing playlist in itunes to my tablet, it does not show sequential numbering of tracks? It would make it easier for me to id the numberical order of tracks?

If the movie clip is there, but no thumbnails, I would suggest that you delete the thumbnails, cache, and analysis folders but take care not to delete your original clips. Do this in the Finder after shutting down iMovie.
Then restart iMovie and let it regenerate the thumbnails. Let it run until it finishes.

Macbook Air 11" (Mid 2013) takes time to become active after being inactive for a while

I've got Macbook Air 11" (Mid 2013). But it has an issue of taking up some time to be active after it has been inactive for a while (like when i dont use it for a while the macbook autosleeps and then when i want to work on it and try to get it active the screen only shows mouse pointer in a black screen and then the other components like the small window where you enter password and other takes time to appear...)
plz help...I've been facing this problem for 2 weeks now...and wanna fix it as soon as possible....plz help...

Hope this helps.
http://support.apple.com/kb/PH13976
Start up in Safe Mode.
http://support.apple.com/kb/PH14204?viewlocale=en_US
Best.

Rotated movs not staying rotated after being imported into iMovie

Hi,
Used Quicktime to rotate some camera phone videos and saved them as .mov files.
They play fine but on importing to iMovie they have reverted to their unrotated state!
How annoying!?

Ouch!
QuickTime 7 has done away with the ability to freely rotate (or skew) video tracks and the link you've provided shows screen shots that do not appear in QT 7 Pro.
Version 7 allows rotation (90° increments) and "offset" (location of the track as a layer).
Since I don't own a camcorder I rarely run into this issue. Some people shoot in "Portrait" mode (turn the camera 90° and shoot) and then have issues importing to a DV app like iMovie. It wants to scale or squish of stretch your video capture to the DV dimensions (720x480).
So. What's a gal gonna do with portrait video?
QuickTime Pro 7 can fix it, too. Just not as easy as version 6 and with less visual "clues" as to what is happening while you edit.
QuickTime Pro can have up to 99 layers (tracks).
Make an image format file (.png if you need alpha channels) sized to the iMovie format size. NTSC is 720X480 pixels. The image will be all black (paint bucket tool) and saved as .png or even .pct. Don't use .jpg because it doesn't allow transparency and avoid .gif format because of the lack of colors.
Open this new 720X480 image using QT Pro. Select all (Command-A) and copy (Command-C). It's now stored on the Mac clipboard.
Open the video shot in portrait mode. Select all (Command-A) and choose "Add to Selection & Scale" from the Edit menu.
Not done just yet.
Open the Movie Properties window and single click on your video track (the real video track). Click the Visual Settings tab where you can adjust its "offset" and "scaled size". Adjust these settings to what works best for your video track size.
Switch back to the Player window and test. Adjust as needed until you're happy with the file and the position of your video track against this black background image. If you don't even see your video track you'll need to set its "layer" number lower than your black background image. Negative values can be entered.
All happy now? Are you sure?
Two options for this new file. Save As (self-contained) to make a QuickTime movie you could use in a Web page. Had you used a color other than black for the image this is where you could "blend" it into the background of your page.
Export. To DV Stream. This helps "lock" your file and it will rapidly import into iMovie where you can edit it further.
What about the added B/W .png file? It only acts like a placeholder to force your portrait movie be served in landscape format. I'll bet it isn't 20KB's in file size.
Hope this helps other users. Lots of steps but great results (when done correctly).

Why Are pictures blurry! after I import them from Iphoto

Very Frustrating as some of the photos are blurry in I movie. Others are OK

It doesn't.
When you import Raw to iPhoto the app makes a jpeg preview of the Raw automatically. When you import from iPhoto then Aperture brings over both versions.
Regards
TD

MP3 files not maintaining integrity when being imported into CP

I am imported MP3 voices files into my Captivate slides and
strange things are happening. I need your help! Some of the MP3s
will import properly into a CP file, but some sound like a machine
gun when played while others import no sound whatsoever. I have
tried a variety of ways to import and I have tried to alter the
properties of the imported MP3. But nothing seems to fix it. When I
listen to the MP3 prior to importing it, it sounds fine. The
problem is happening during the import.
Additionally, many of the MP3s slow down and play the voice
too slowly after being imported. Again, they sound fine before the
import but become distorted once I have imported them.
Please let me know if there is a work-around or solution for
this problem! Thank you!!!

I was dragging to a folder with no playlist
Drag the folder to the word Playlist in iTunes and it will create a new playlist nmaed after that folder with the songs in that folder.

OS X partition becomes corrupt after switching from Bootcamp

So I've had to reinstall os x 10.9.1 no less than three times this week and multiple times before in the past after switching between os x and windows 8.1. This usually happens after I've been using windows for a prolonged period then switch back to os x but it happened today after reinstalling os x from a time machine backup just yesterday. I'll switch between the two and os x becomes corrupt and begins the loading bar sequence after selecting the os x partition via the refit boot manager. I tried repairing the partition using disk utility from the repair partition and an external installation of os x 10.9.1 but every time the disk becomes corrupt and needs to be wiped and reinstalled or install a time machine backup. I've lost count of how many times I've had to do this and to make things even worse both of my external disks have become corrupt after being disconnected for two days while I sort this mess out. Does anyone else have similar issues or can locate an issue somewhere?

Yeah I reinstalled osx 10.9.1 and installed all my apps, put everything back then used bootcamp to create a partition for windows then used wineclone to install my windows 8.1 backup. I jumped from windows > osx > windows > osx inside an hour to move around a few things and I forgot verify bootcamp after I installed the backup and that last time I booted to osx it was corrupted. I used disk utility from my external installation and the recovery partition and both times they need repaired which only came up with the backup and wipe notification window. There have been two occasions where I was able to fix the osx partition from my external osx installation and continue using osx quite perfectly but usually the partition becomes un-mountable after it fails to repair. Usually when this has happened the twenty something times before it's after a prolonged period of a few weeks using windows.
I'm using refit boot manager and paragon NTFS 11 which may be the only software I've installed that could be corrupting the boot.
SMART status is verified

None of the vertical pictures will import. I don't even get the black screens so can't even try the edit option that others suggest. Sounds like we all have to report it to apple to get a fix?????

I Cannot import any vertical pictures. I don't even get a black screen and therefore can't edit. After downloading from the camera the vertices pictures show with a red ! And won't import. Sounds like we all have to report this to apple ....but anyone had same issue and how can I fix, we are on trip and need to clear the camera for more photos.

This topic belongs in the iPhoto for iOS community. I've asked the hosts to move it there.

Still Images & Need to 'Scale to Sequence'-Vertical vs. Horizontal Picture

I make sequences from still images only. I need to start editing with all images at a Scale (in the Basic Motion section) of 100. When the original image is 720 width x 540 height (a picture taken horizontally), it appears in the timeline at a Basic Motion:Scale of 100 (this is what I want). However, when the original image is 405 width x 540 height (a picture taken vertically), it appears in the timeline at a Basic Motion:Scale of 112.5 and overflows the top and bottom of screen.
For these vertical images, I can then set the Scale manually, or use "Scale to Sequence" and get it to start at 100, but would like to avoid that extra step. Any ideas on how to have all imported images start at a Basic Motion:Scale of 100, whether taken vertically or horizontally?
Thanks, in advance, for giving this problem any thoughts.

I think that your best bet would be to
1) make the images all the same size - adding black to the edges if necessary. You could add an alpha channel on the ones that you had to add black to the edges.
or
2) copy the motion settings from a still that is scaled correctly.
or
3) grin and bear it.
I created a file earlier this morning that FCP didn't scale, but now I can't duplicate it. All the files are getting scaled. According to the manual, FCP isn't supposed to scale past 100%, but they might have changed that with a revised version.
Good luck!
Leigh

I have been using iphoto 09 and am now unable to import photos from my camera. I get the message that they are being imported but after 10 minutes nothing has actually been imported.

I have just been trying to import photos from mine and my husbands cameras but nothing seems to be happening. I get the message to wait while they are being imported but after 10-15 minutes, nothing has been uploaded. I have always had updates downloaded when they become available and can't think what I may have done wrong.
I hope someone out there can give me some advice. My mac is running Snow Leopard and I love it.

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

After I import from my camera, my pictures are not showing up in my events. But I can find them in Last 12 months. Any ideas why??

After I import my pictures to iphoto, I can't see them in my events. I can find them in last import or last 12 months. Why did my pictures stop showing up in events???

They have not - your events are sorted manually - go to the view menu ==> sort events and select your choice of event sort order
LN

Vertical pictures become horizontal after being imported

Similar Messages

Maybe you are looking for