Vertical Pinch Zoom with Logic 9 & Lion

Trying to figure out an easy way to do a vertical zoom in Logic 9 and Lion
Back in the old days (last week) when I used logic 8 and lepoard, it was easy with cntl up/dn (or something like that, my fingers know the routine)
The pinch work fine for horizontal zoom with the new setup, but how do I do a vertical zoom?  (The old cntl/up thing doesnt seem to work any longer.)
Thanks!
Geoff

Greetings,
So far, everything seems as stable as before.  Which doesn't actually mean its rock solid, but otherwise workable.  I'm running a Focusrite Saffire Pro 24DSP with beta audio drivers.  So far, everything is running well.  I decided to jump into the 64bit work environment with Logic.  I have yet to encounter huge problems with the 32bit audio bridge.  Just making sure I bounce everything that is 32bit.
As for everything else within Logic, I can't say I hate Lion.  Matter of fact, Lion seems buggier than Logic at the moment.  Logic handles well in Lion, but Lion on its own overall is a different can of worms.  I am mixed about a 10.7.1 update.  Usually, it fixes something on the OS, but breaks something else in Logic.
I have faith that Lion will turn out to be as solid as Snow Leopard.  SL was my favorite OSX so far.  Lion still leaves allot to be desired in terms of stability.
Again, answer to your question:  for me, Logic and Lion play nice.............for now.
LGK

Similar Messages

  • Cannot pinch/zoom with trackpad when in Mail

    When using Mail (and Lion), full screen, the trackpad does not respond to pinch/zoom or control/2 fingers up. Is the zoom feature of trackpad supposed to work in Mail?  It does work in Safari.

    Mail doesn't support the pinch/zoom feature.  It does support CNTL scroll up zoom feature though.
    Some people have found cntl scroll up zoom feature quits working occasionally.  I've had it happen once or twice.  In this case you can put the screen to sleep and then wake it, the feature will operate again.
    I defined an active screen corner for this is purpose in System Preferences > Mission Control > hot corners.. button. 
    Regards,
    Captfred

  • Lion / Safari 5.1 has issues with the pinch/zoom (embedded links don't zoom correctly)

    Ever since upgrading to Lion Safari 5.1 has issues with the pinch/zoom.  Any embedded link does not zoom in proportion to the surrounding page and it makes it unusable. (the embedded link zooms much more).  Any ideas?  This makes safari almost unusable for many webpages.
    Is there a fix to this?  Or can I consider uninstalling 5.1 and rolling Safari back to 5.05?  Not sure if this is a Lion issue or a Safari issue.  Everything worked great prior to Lion. 
    (I have to say, Lion has been more annoying than beneficial to this point!)

    Here are 2 screenshots of the issue (before and after a zoom)  see how the add in the first one that shows 25% off in the first picture zoomed too large after the zoom to see the whole thing?

  • Problem with Pinch & Zoom

    Hi there, I have set up my folio with multiple articles, each with a horizontal and vertical orientation. I imported each article seperately as PDF format. When I view on my iPad the pinch & zoom only works on the first page, but not on the rest. However, if I set up a folio with just horizontal orientation and PDF format the pinch & zoom works on all pages. Is this a bug or is there something else I should be doing to enable pinch & zoom on all pages?

    Yeah, I think this is a bug. I encountered this error.
    I need to wait for a long time to bundle my folios and after that zoom didn't work, so i need to rebundle again, still dont work.
    What i do is get the first page(with working zoom) and put it in all the stacks folder, and bundle it. It work, then I need to copy paste all the correct pages in each pages and rebundle it again.
    Got so much work and time consuming, not very nice.
    I hope Adobe will fix this, their updating the functions to worst. I just noticed.

  • OS Lion does not support pinch/zoom gesture in Finder

    I've seen multiple posts on this same issue.  I just want to add my vote to Apple to restore the pinch-zoom gesture in Finder to OS Lion.  I'd love see either a solution, or software update that will rectify this issue.  I don't even know why there would be any sense in removing this feature.
    Vic

    Thank you for your response Rodney.  The issue isn't with the browser though.  The pinch-zoom works perfectly in Safari.  The issue is with Finder.  When I'm sorting/organizing files in Finder, I the pinch-zoom functionality doesn't work, so I'm limited to the 4 viewing styles buttons that are available.  I can't scale my views which is really inconvenient.  Finder used to have this functionality in OS Snow Leopard, so I really hope this function is restored in OS Lion.
    Any feedback or ETA if this is going to be addressed by Apple?  I see many other cries to have this feature restored in OS Lion.
    Sincerely,
    Vic

  • I have Logic Pro 8.0.2 and would like to upgrade. I'm running OS Lion on a 2010 MacB Pro. What is the best option? Logic Pro 9 App or Logic Studio? Can't find upgrade price. Or should I just stay with Logic 8?

    I have Logic Pro 8.0.2 and would like to upgrade. I'm running OS Lion on a 2010 MacB Pro. What is the best option? Logic Pro 9 App or Logic Studio? Can't find upgrade price. Or should I just stay with Logic 8?

    Same here, I have Logic Studio 8 and wouldn't mind staying with that version, except that the installer won't run on my new Macbook Pro as PowerPC apps are no longer supported. That's the message I get in any case.
    I use to run Logic on a 2006 Macbook Pro.
    I guess that makes me a very unhappy Apple user! I've been using Logic from the Emagic days, bought every upgrade only to see Apple kill what used to be one of the best Pro Audio application. Imagine if they had done the same to Photoshop, there would be a lot of unhappy designers out there
    Paying the full price for years to slowly see your daily app go down in price & efficiency until it's given away at $199 for semi pro users. Well, at least ProTools is stil alive & kicking so I guess that's the way forward now.
    This is coming from someone that never ever used a Windows machine to make music! Life is good still!

  • Problem with Logic Pro and Soft eLicenser on Mountain Lion?

    Hi!
    I have a bunch of Arturia synths, which requires the Soft eLicenser to work. This has always worked great with Lion, never any problems with eLicenser (never had to open it etc.)
    Now - I upgraded to Mountain Lion, and tested my synths to make sure everything was OK, experienced a bunch of problems, and did a full recovery to clean Mountain Lion.
    After installing the Arturia synths, and adding my licenses, I installed Logic. Everything worked fine!
    BUT!
    When I closed an Arturia synth within Logic, or closed Logic after running a project with one of these synths, I couldn't reopen any of these synths within Logic afterwards - In fact, I couldn't open the stand-alones either! And when I tried to open the eLicenser Control Center, it would just say "Reading eLicensers" forever. After a reboot, everything is OK.
    I can open and close eLicenser Control Center and standalone synths as many times as I want, as long as I don't open Logic, and then Arturia synths as an AU in Logic.
    I found a workaround: Open the eLicenser Control Center, and let in run in the background (cmd+H), and then open Logic. Then I could open Arturia synths and close them, close Logic and reopen etc. without any problems at all. NO PROBLEMS.
    Until I close the eLicenser Control Center, then I have to reboot to be able to start it again.
    I hope you understand what I mean here. It's a bit hard to explain.
    In short terms: Logic makes Soft eLicenser crash when a eLicenser synth has been opened as an AU.
    The same problem is when scanning the AU with AU manager. eLicenser window should be open before scanning.
    Does ANYBODY have the same problems? Can anyone who has these applications test it out?

    So it definitely seems to be a issue with Logic.
    I can't force this error in 10.7.X no matter how hard I try, but in 10.8.2 it's definitely Logic messing things up.
    Could it be auvaltool which has a bug? Or is that only run with AU manager on validation?
    Hopefully this discussion can get some attention, and maybe it could be corrected. I guess a lot of Logic Pro users also has eLicenser Control Center for validation of their products.

  • Hello,i have a retina with Mountain Lion.I have logic PRO 7 and logic Pro 8 ,with  G5.I can't use the CD with the retina!!It's not a powerpC!!How do i install Logic Studio 8 with Mountain Lion successfully ?too évolution Logic PRO 9?

    Hello,i have a retina with Mountain Lion.I have logic PRO 7 and logic Pro 8 ,with  G5.I can't use the CD with the retina!!It's not a powerpC!!How do i install Logic Studio 8 with Mountain Lion successfully ?too évolution Logic PRO 9?

    The installer for Logic Pro 8 has a bug which keeps it from operating in Lion or Mt. Lion.  Use the program Pacifist to install it.

  • Can i use my mini Mbox 2 with logic pro 9 on iMac os x lion?

    Can i use my mini Mbox 2 with logic pro 9 on iMac os x lion?

    Hi there,
    Did you find out anything more in regard to this?
    I have been using Pro Tools 8 with the MBox 2 connected to my iMac operating Leopard. It worked a treat for nearly four years.
    However the hardrive has just been replaced on the iMac which now has Snowleopard.  I don't want to have to update to Lion and then fork out £500 for Pro Tools 10. 
    I would be content to get Logic Pro 9 if I can attach the MBox 2 to it.
    Your advice would be appreciated
    PXC

  • Logic won't pinch zoom, but I really want it to! How can I correct this?

    Hello,
    I recently got a new hard drive put in by apple when I brought my mbp in for a simple headphone jack repair.  I have used migration assistant to get Logic working again on my new hard drive, only now for some strange reason the "pinch zoom" function simply will not work.  It is actually incredibly frustrating! Is this normal? I can't seem to figure out how I can get this pinch zoom feature working again in Logic... any suggestions???  Thanks so much for the help!!!

    "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    If clearing the cookies doesn't help then it is possible that the file ''cookies.sqlite'' that stores the cookies is corrupted.
    You can rename (or delete) '''cookies.sqlite''' (cookies.sqlite.old) and delete '''cookies.sqlite-journal''' and '''cookies.txt''', if they exist, in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder] in case cookies.sqlite got corrupted.
    See [[Cannot log in to websites]] (Remove corrupt cookies file) - See also http://kb.mozillazine.org/Websites_report_cookies_are_disabled (Other Solutions)

  • Folio inconsistencies with pinch & zoom

    I Am having an inconsistent pinch & zoom reaction in my folio. Some times PNZ will work immediately on a page and some times it will take up to three tries. the same page can have different reactions when you leave it and come back. double tap always works immediately on page load.
    The problem is the same whether the folio is in Content Viewer, ether published or unpublished, or built as an app from App Builder. The reaction is slightly faster on my iPad Air then on my iPad mini (non-retina).  I cannot recreate the problem with Bob's March of Dimes app. So, I'm guessing it's the folio/articles.
    THe articles in folio are from a print project built in Indesign. The print catalog contains a mix of graphics from Photoshop and illustrator.  The articles have four layers (top-to-bottom) header, content, search, and footer.
    Header - a button for the search MSO and a hyper link
    Content - type, graphics, and hyperlinks
    Search - MSO with an HTML overlay
    Footer - text and hyperlink
    THe folio is about 80mb.
    I Have exhausted my range of why this is happening. Any insight would be appreciated.
    THanks
    Joe

    Yes, I am having the same issue. Anyone have any answers?

  • HI. ... Anyone know of any issues with using Logic Pro music software with Mountain lion OS.. I have heard rumours in the past is that all sorted now?

    HI. ...
    Anyone know of any issues with using Logic Pro music software with Mountain lion OS..
    I have heard rumours in the past is that all sorted now?

    At least Logic Pro 9 and Logic Pro X work correctly in Mountain Lion. Furthermore, Logic Pro X requires the latest OS X Mountain Lion version

  • TS2567 Logic Express 9.1.8  compatible with Mountain Lion?

    I have just upgraded to Mountain Lion OSX 10.8.2 and am having some weird issues with Logic Express 9.1.8.  Are the two incompatible?  Or could my slightly outdated M-Audio Firewire 410 be the problem?  I've updated the M-Audio driver, but I think it's still an old version....

    To answer my own question, the problem is with M-Audio, not Logic Express.  The latest M-Audio driver does not equip the Firewire 410 to deal with Mountain Lion.  Strangely, one of the older ones seems to cope just fine.  If anyone else has these problems try this driver, which is meant to be for Mac OS 10.6.8 64-Bit, Mac OS 10.6.8 32-Bit, Mac OS 10.7.4:
    http://www.m-audio.com/index.php?do=support.drivers&f=1229
    Fingers crossed that M-Audio will eventually get round to updating their drivers properly.

  • Does Logic Pro 9 work with Mountain Lion?

    Hey!
    I was wondering...
    My computer has Snow Leopard installed and i would really like to get Mountain Lion. BUT there is a problem... I don't know if Logic Pro 9 will with Mountain Lion. Can anybody help me with it? And also does Logic Pro 8 and the microsoft pack (word, powerpoint, excel etc. 2011) work too? Please help me if you know it
    THANK YOU
    Cheers
    - Kufax

    Since I'm not in the middle of anything critical and have multiple backups, I decided to take the plunge and upgrade. I've only been running for an hour or so, but here's where I am:
    2008 MacPro, 8x2.8Ghz, 16Gb RAM. SSL MADI PCIe card for I/O. Logic 9.1.7
    Tested with a couple of recent, decent size projects (40+ tracks, VIs and plugins). Not seeing any perormance differences.
    Working:
    - Euphonix MC Mix
    - UAD2 Duo
    - Spectrasonics Omnisphere
    - NI Komplete 8
    - Waves 9
    - Soundtoys 4
    - Wallander Instruments
    - EW Play
    - Melodyne
    NOT Working:
    - Access Virus TI. Plugin opens but cannot connect to Virus. I am running the latest stable v4 release - I will try installing the v5 public Beta and report back. This is a deal breaker so if I cannot get it working I will roll back to Lion
    - SSL Duende Native. Authorization is failing. Possibly a CodeMeter issue or just authorizations lost during upgrade - will look at this next.
    Make sure you are running the latest iLok driver - there was one released a few days ago.
    More as it develops.

  • Vertical zooming with toggle wheel?

    Only been a few days but so far the most difficult thing for me transitioning into CS6 from 3.0 is the lack of vertical zooming with the mouse's toggle wheel in multitrack view.  The sidebar just scrolls now--no zoom.  I know there's a little button for that below the tracks but...its just not the same lol and it never zooms where I want it to.   This is slowing me down like crazy and hoping there might be a way to enable that I don't know about.  I'm not seeing anything about it in the forum or preferences in the program.  I know it seems like nothing but for someone who's been using 3.0 nearly everyday since it came out this one simple thing is really difficult to get used to.  I was perfectly happy dragging the bar for scrolling and zooming all in the same place. 
    Besides the muscle memory side of things--it seems like having to take your eyes off the multi-tracker to hit that button a few times instead causes one to 'lose their spot' so you can easily lose track of what your zooming in on in the first place.  The bottons wont even zoom to the center its like its just some random spot that its zooming to.  Having to look at the keyboard for the key commands (as another option) isn't any better for workflow and still gives me no control over the vertical zoom destination...I have to scroll through everything to find what I'm looking for (not cool when there's like 50+ tracks going) after I'm zoomed in only to find out I need to zoom in further and the process repeats.  So at this point what used to be quick stroke of the toggle wheel is now a process lol.
    IF no vertical toggle wheel zooming is there at least a way to control the location of vertical zooming?  or at least the degree of it rather than the intervals provided by the buttons or key commands?

    Brevity being what it is...
    ver·ti·cal
    [vur-ti-kuhl] http://dictionary.reference.com/help/luna/Spell_pron_key.html
    adjective
    1.
    being in a position or direction perpendicular to the plane ofthe horizon; upright; plumb. 
    2.
    of, pertaining to, or situated at the vertex. 
    3.
    of or pertaining to the cranial vertex.

Maybe you are looking for