Vertical Synchronization between Item DP and Initiative DP

Hi Folks,
Assuming that an Initiative will contain multiple portfolio items, how does the vertical synchronization of status work.
Let's say I map the Portfolio Item Decision Point to Initiative Decision Point, how will the status sync work if I have 5 portfolio items at different statuses? Since there is a 1:M relationship between Initiative and Portfolio Item, is this scenario supported.
Example: Initiative has 5 portfolio items and 1st decision point is "Move 2 Concept". Will the initiative DP status change when the 1st portfolio item DP "Move 2 Concept" is set to complete. What happens when the other portfolio items DP gets completed at a later stage.
Please let me know if the question is not clear enough.
Thanks,
Lashan

Hi Lashan,
in standard always the last changed Item DP status will be synchronized to the Target Initiative DP status.
Best Regards,
Andrea

Similar Messages

No calendar synchronization between outlook2010 iphone4 and mobileme

Since I bought mobileme everything went wrong.
I can synchronize between mobileme and my iphone 4 (IOS 4.1)
But this is all.
No synchronization between outlook (2010) and mobileme (1.6.2)
No synchronization between outllok and Iphone
I tried almost everything..
I removed itunes and reloaded itunes
I removed mobile me and reloaded
I repared Outlook
I removed Outlook and reloaded outlook
and finally I removed Office pro 2010 and reloaded it..
Nothing worked at all..
I have another computer (at home) which is perfectly synchronized, with mobileme, outlook and my iphone.. Also a PC Windows XP pro.
I only use a single calendar..
I cannot find what's up here. And of course asked several expert groups
and obtained no answer. May be some of you experienced the same trouble and I could appreciate your feedback of what you did to fix this
looking formard hearing from you
Best regards
Jacques

Well, I have checked the iCloud settings on the phone. As I have mentioned above the are obviously storage at the iCloud in use because I can see that there are less than 5GB avaliable. But I can not see the new calendar entries on the phone.

Synchronize between promatric account and microsoft account

hi
i try to make Synchronize between promatric account and microsoft account but he con not find the certificate i toke it,

Hi ahmad_alnjjar,
It might seems that the training center have created a new MCP ID for you. To solve your problem just give a call to your Microsoft Region Service Centers (https://www.microsoft.com/learning/en-us/help.aspx) by calling them to merge your 2 MCP IDs to one
account.
Hope this helps :)

Difference between Delta download and Initial download

Hi friends
what is the difference between Delta download and Initial download
what Tcodes are used for Delta download and what tcodes used for initial download
regards
krishna v

Hi,
The CRM middleware allows the following two methods for replication.
-Initial loads:
Launched manually (tcode R3AS), the objects (customizing or business) are replicated between SRM and R/3, according to the filters you've put on the object (R3AC1 for Business objects like MATERIAL, R3AC3 for customizing objects like DNL_CUST_PROD0 and 1).
-Delta loads:
This option is only possible for Business objects, which is the case of MATERIAL.
With this option a daemon is launched between the 2 servers. Every modification made on an object on SRM or R/3 is transfered as soon as this object is contained in the filter retrictions (creation and/or modification). this is done through transaction R3AC4.
BR,
Disha.
Do reward points for useful answers.

Difference between Item Cost and Last Evaluated Price

Dear All,
What is the difference between Item Cost and Price in Last Evaluated Price List. Exactly when are they updated?
Regards
Sibasish

Hi Sibasish,
The "Last Evaluated Price" is simply a price list but can't have a direct manipulation like other price lists. Its values may not involve in any accounting transactions if it's not selected for the concerned transaction any way.
On the other hand the item cost is the cost which is maintained by SAP B1 (until and unless you select the Standard Valuation Method), and it gets involved in the accounting transactions where inventory is involved. For e.g. the "COGS" is calculated on the basis of this value.
Please close this thread if answered ... or please let us hear something more from you on this...

Difference between To maintain and initial in plant parameters in MRP custo

Hi, Gurus,
Can anyone explain me about the difference between status showing
to maintain and initial in plant parameters in MRP customization
Thanks & Regards
sathyanarayana

Dear Sathyanarayana,
In T code OPPQ - Maintain Plant Parameters,it does not
mean we have to maintain a value in all the parameters
present under different tab keys.
IF you check generally MRP controllers,Floats,Number
Ranges,BOM/Routing Selection,Planning horizon,Available
stock these values will be maintained.
Some of the settings like Start in Past will be as Initial(not
allowed in the past).
IF you use some special procurement key,then that settings
has to be maintained.
I hope this will help you.
Regards
Mangal

Difference between Item Proposal and Dynamic Product Proposal

Dear All,
What is the difference between Item Proposal ( VA51) and Dynamic Product Proposal?
Thanks and Regards
Deepak Joshi

Hi,
In item proposal when u enter the details in the sales document you have to click on propose items to get the list
the customer regularly purchases.
While in dynamic product proposal once you specify the sold to party and press enter , system automaticall gives you
the list of the materials the customer regularly purchases, it a faster way of entry than item proposal.
please let me know if i am wrong.
Thanks,
Mohanprabu, C.

Difference between Item Proposal and Material Determination

Hi
What is the difference between the item proposal and material determination product proposal?
Thanks
KM

Hi
Item proposal and product proposal are the same.
Item proposal is the list of materials and order quantities that can be copied into the sales order from the customer master data.
We use VA51 to create the item proposal. Here we get a number.This number is then linked to the customer master data in the sales view. This is very commonly used.
Material determination is very closely related to item proposal /product proposal and is used to swap one material for another in the sales order using the condition technique. I have not seen Material determination procedures used in the projects I have worked.
Item Proposal or Product proposal:
Item proposal is same as product proposal & SAP uses the two terms interchangeably.
An item proposal is a list of materials and order quantities that can be copied into the sales order. Items can also be selected from a list and copied into a sales order.
1) Use transaction [VOV8] to configure the document type ("MS" for product proposal).
2) Use transaction [VA51] to create a proposal.
3) Enter the item proposal on the sales area data (sales tab) of the customer master record.
4) In [VA01] to create a sales order, Select Edit & propose items."
Material determination:
"Material determination uses the condition technique to swap one material for another when certain conditions apply. Material
determination is triggered by the material entered in the line item of the sales order.
Use transaction [VB11] to create a material determination condition record. And [OV12] for configuration of material determination.
Material determination is useful when old product is becoming obsolete or a new product is released by the company at specific date."
Thanks
CGRA

Synchronization between iBook G4 and MacBook

Hey there!
I just got my new MacBook and I love it! Til today I have had the last generation of the iBook G4. I want to synch both. The iBook-data should mirgate to my new MacBook. Earlier that worked a fire wire connection. Now I recognized that the MacBook does not have a fire wire sonnection. How does the synchronization work? With USB 2.0???
I would appreicate any comments which helps me to solve this "problem"...
Thank You!

The cable works fine, tried it between the PowerBook G4 and an external hard drive.
The MacBook does not boot. It turns on to a blank white screen and stays there. It won't boot into safe mode or single user mode or anything like that.
Yes, I do have the install discs and put them in to try and reinstall Leopard. They boot, but the hard drive won't show when it asks me where to install. I hear there's a bug with the hard drive not appearing there and waited up to an hour on that screen, but that didn't make it show either. Then I went into Disk Utility, but the hard drive wouldn't show there either. At some point it did, but I couldn't run a repair on it. Then I restarted with the installation disc in again and then it wouldn't show at all.

How do I add vertical space between items in a WebHelp TOC in RoboHelp 10?

I recently upgraded from RoboHelp 8 to RoboHelp 10. When generating my WebHelp output in RoboHelp 8, I added space between the items in the table of contents by editing the following line in the whthost.js file.
var gsMargin="6pt";
After upgrading, I edited the same line in the whthost.js file for RoboHelp 10. Unfortunately when I generate my WebHelp output in RoboHelp 10, no space is added between the items in the table of contents.
Does anyone have any idea why editing this setting in the whthost.js file no longer produces the desired results? Does anyone have any suggestions?
Thanks!
George

One way is to do something like this:
1) create your styles like this:
span {
font-family: "Courier New", Courier, monospace;
letter-spacing: 3px;
2) create your HTML like this:
<p> <span>Xc = 10^6/2* pi *50 * C Xc = 10^4/pi C </span></p>
Now is this what you are looking for? If not please post back so that something else can be suggested like Math HTML such as this one:
<MATH>∫_a_^b^{f(x)<over>1+x} dx</MATH>
FF and latest IE9/10 supports MAtH HTML as far as I know.
This is the picture of display in IE10:
Good luck.

Exact difference between Item category and Account assignment category

Can anyone plz give the exact difference between account assignment category and Item category
Thanks inadvance

Hi,
Account Assignment Category: Key indicating whether an item is to be assigned to an auxiliary account (such as a cost center). The account assignment category determines which account assignment data (e.g. cost center, account number, etc.) is required for the item.
Item category: Identifier indicating the characteristics of an item. The item category determines whether the following are necessary or allowed with regard to an item:
Material number, Additional account assignment, Inventory management in the R/3 System, Goods receipt, Invoice receipt.
Prase

Synchronization between su01 (usr02) and IdM

Hi experts,
if I assign an ABAP-system to CUA, transaction su01 in the managed system is locked. In opposition to IdM I can change or create in the managed system in t-code su01 user profiles. But if I create or change a user in su01 the change doesn't occur in IdM. Is there an abap specific task to synchronize usr02 an IdM? And is there any way to lock t-code su01?
Thanks and best regards,
Max

You need to run the AS ABAP update job on regular basis to get the information changed in ABAP to IdM.
Just modify your AS ABAP update job correctly, map only the attributes that you want to update or use the "." notation in the mapping and schedule the job according to your requirements.
You really need to define what system is the owner of which attribute and configure your provisioning tasks and jobs accordingly. If IdM is the leading system then the practice should be that nobody alters the data in SU01 anymore.

Synchronization between Oracle Calendar 10.2 and Exchange 5.5 calendar

We are going to migrate 1000 users from Exchange 5.5 to OCS 10.1.2.3.
Mail and Calendar migration is done with ES/EX-migrate, but we have a PABX system (Trio Present 2.3) that is integrated with Exchange Calendar,and this is not compatible with Oracle Calendar in its current release.
In simple terms Trio is integrated with the calendar to programme our phones to "Busy", "Home Sick", "Meeting" etc, based on calendar entries.
In order to preserve this functionality we have to "coexist" with Exchange's calendar.
I see in the Coexistence guide that this is possible to booke meetings in both alendars, but we need a synchronization feature, as the users can booke meetings through their phones, which are then inserted in Exchange, but not Oracle.....
Any idéas ?
Regards,
André

If you find a solution that actually synchronizes between Oracle Calendar and Exchange, let me know. I don't want the Outlook connector - which creates access to the Oracle Calender using Outlook - I actually want to synchronize between the Exchange calendar and the Oracle Calendar. This way, if I update Exchange (using Outlook), Oracle Calendar will be updated when I synch. Also, if I modify the Oracle Calendar, the Exchange Calendar will be updated. We are using Exchange 6.
Thanks,
Fuller Ming, Jr.
[email protected]

Synchronization problem between the iPhone and iTunes

Hello
How do I solve this problem of synchronization between the iPhone and iTunes?
He always gives me this err:
Problem Event Name: APPCRASH
Application Name: SyncServer.exe
Application Version: 17.641.8.1
Application Timestamp: 4c0ed8cb
Name of the default module: CoreFoundation.dll
Default Module Version: 1.550.26.13
Module Timestamp default 4bff35d2
Exception code: c0000005
Shifting the exception 00043dd9
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1036
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Details No. 4: 0a9e372d3b4ad19135b953a78882e789
Also another error:
Problem Event Name: APPCRASH
Application Name: AppleMobileDeviceHelper.exe
Application version: 17.758.0.68
Application Timestamp: 4c0ed8cb
Name of the default module: CoreFoundation.dll
Default Module Version: 1.550.26.13
Module Timestamp default 4bff35d2
Exception code: c0000005
Shifting the exception 00043dd9
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1036
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Details No. 4: 0a9e372d3b4ad19135b953a78882e789
Thank you in advance for help.
<Config> Windows 7 / iTunes 9.2 / iPhone 3G 16 GB>

http://discussions.apple.com/thread.jspa?threadID=2470826&tstart=60
A discussion a little way down send you to a website charlesgates?? i think and he will walk you through your problem.
Corefoundation.dll is your issue. Good LUCK!!

Link b/w item category and material group

Hi All,
Is there any link between item category and material group.
Regards
Pavan

Hi Pavan,
Item Category
Item Category is a control field that allows the PR to follow the correct path for the correct path for that category of PR. The SAP system is delivered with a set of item categories
Blank -Standard
K- Consignment
L- Sub Contracting
S- Third Party
D- Service
U- Stock Transfer
Selecting an item category allow the display of certain fields and not others
For Ex: If PR item has an item category K for conignment then invoice receipts will not be allowed
Material Group
Material group is a method of grouping of similar materials.It is defined either by using classification or by configuration. It is important not only for seracing the materials but also in other areas of purchasing
A purchace inforecord can be created with out a material number but must require materail group and vendor
Material group is configured through Tcode WG21
And i do not find any link between them
I hope this gave you the clarity
In case of any more information required do get back
If found helpful reward accordingly
Thanks & Regards
Pavan

Vertical Synchronization between Item DP and Initiative DP

Similar Messages

Maybe you are looking for