Vertical zooming with toggle wheel?

Only been a few days but so far the most difficult thing for me transitioning into CS6 from 3.0 is the lack of vertical zooming with the mouse's toggle wheel in multitrack view. The sidebar just scrolls now--no zoom. I know there's a little button for that below the tracks but...its just not the same lol and it never zooms where I want it to. This is slowing me down like crazy and hoping there might be a way to enable that I don't know about. I'm not seeing anything about it in the forum or preferences in the program. I know it seems like nothing but for someone who's been using 3.0 nearly everyday since it came out this one simple thing is really difficult to get used to. I was perfectly happy dragging the bar for scrolling and zooming all in the same place.
Besides the muscle memory side of things--it seems like having to take your eyes off the multi-tracker to hit that button a few times instead causes one to 'lose their spot' so you can easily lose track of what your zooming in on in the first place. The bottons wont even zoom to the center its like its just some random spot that its zooming to. Having to look at the keyboard for the key commands (as another option) isn't any better for workflow and still gives me no control over the vertical zoom destination...I have to scroll through everything to find what I'm looking for (not cool when there's like 50+ tracks going) after I'm zoomed in only to find out I need to zoom in further and the process repeats. So at this point what used to be quick stroke of the toggle wheel is now a process lol.
IF no vertical toggle wheel zooming is there at least a way to control the location of vertical zooming? or at least the degree of it rather than the intervals provided by the buttons or key commands?

Brevity being what it is...
ver·ti·cal
[vur-ti-kuhl] http://dictionary.reference.com/help/luna/Spell_pron_key.html
adjective
1.
being in a position or direction perpendicular to the plane ofthe horizon; upright; plumb.
2.
of, pertaining to, or situated at the vertex.
3.
of or pertaining to the cranial vertex.

Similar Messages

Zoom with scroll wheel?

The zooming with scroll wheel feature stopped working after I installed MAC OS X 10.6. Anyone have a suggestion about how to get that feature working again? Thanks.

Okay...did that too. We'll see. I appreciate your help.
Having a major printing problem though. Looks like I am going to be doing a lot of testing soon because the presents for my Canon iP6700D don't work like they did two days ago. Canon has a new driver which I believe is the problem. Maybe I can get back to the other one that worked like a charm. -- Sandy

Photoshop 5 choppy during zoom with scroll wheel

So after a agonizing weekend of talking to Adobe suport to get photoshop installed because they sent me the wrong version and horrible customer service (thanks adobe), I finally get to start using photoshop and it's just buggy as heck. Wierd jerky motions and a lot of spinning wheels. I have a macbook pro early 2010 3.06 processor with 6gb of ram on os x 10.6.8.
Well the photoshop is choppy and horrible when using the scroll wheel to zoom. I opened the same document in CS4 and it was fine smoothly scrolling in and out as slow or fast as I wanted. CS5 is jerky zooming 20% every time I move my finger on the mouse. It is driving me crazy!@!
I adjusted all of the openGL setting, memory, etc, etc and nothing helps. I can't imagine that photoshop would be worse when it is supposidly an "upgrade", but I'm so pissed off that I might just go back ot CS4 until I get this figured out.
Another Adobe product that is buggy as heck, but this has been around for almost a year, so please tell me how to fix it. Is there an update i don't kow about or SOMETHING?!?!
I did a search, but when i foudn someone with the same issue, it was not answered...
Adobe, you need to make better products.

It's not performance, it's a missing feature and adjustments (if I can get it to work right) I need to have the selection tool active and be able to zoom wiht the scroll wheel! (even if the srolling is choppy) I need it to zoom in and out, with the scroll wheel, while the select tool is active!
The scrubby zoom is smooth and it's nice, but the choppy scroll wheel zoom and no zoom when the select tool is active are deal breakers for this software! You guys try to cram as much stuff in the program as possible, but if you take things away, it pissed people off. If there is a way to to scroll zoom on while i have the select tool down, then tell me.

Zoom with wheel

Is there any way to change the default scroll to zoom when using the mouse wheel? I couldn't find any options in prefs. Yes, I know I can use the ALT key to accomplish this with the wheel but I would prefer it if AI worked like every other Adobe program I use in this respect.
Thanks!

BUMP!!!
I thought these suites were supposed to be highly integrated... How can they be deemed so integrated when performing the same exact functions are performed using ever-so-different methods?? I am an avid Photoshop and Illustrator user and it is down right irritating when I go from one ap to the other and have to change up my shortcut methods. It is like a mental kick in the brain everytime you want to do the SAME EXACT FUNCTION between applications. It is like walking face first into a very clean sliding glass door... It is like dunking your donut into the ashtray that was too close to your coffee... ok I think you get the picture, it sucks.
You already give us the option to turn on or off the "Zoom with Scroll Wheel" in PS, why not in AI? As in Photoshop, I personally would rather zoom than scroll vertically or horizontally with the wheel in Illustrator without the alt button thank you very much. I can do the other with other shortcuts or just by panning with the space bar.
Give the user control of how they use the software please! I mean come on... you have plenty of completely useless options to give us, like for instance we can turn off the blue color of the PS icon in the Photoshop toolbar and turn it into a gray icon (whoo hoo... now there's a useful tool). It is like the engineers would rather spend any extra time hiding Easter eggs in the aps for us to find than spend more time giving us more useful options to better completely customize our aps. I guess that I am asking too much.
What the heck is that option for the icon color mode for anyway?

Zoom in and out with the wheel

Hello
I have a mouse with a zoom button wich gives a direct access to the zoom in Adobe Reader. Unfortunatly, when I click it, I can zoom in by spinning the wheel up (the cursor becomes a magnifier whith a plus sign), but not zoom out by turning the wheel down.
Checking the option "Activate the zoom with the wheel" in the preference menu allows to zoom in and out, but precludes from using the wheel for scrolling, so the option is useless.
In fact it seems the zoom button of the mouse activates the function "zoom in" instead of "dynamic zoom", which would give the correct behavior. The mouse software (Setpoint, from Logitech) allows to configure the buttons per application, but has only one zoom option, which leads to "zoom in only" with Adobe reader.
Do you know a work around for this ?

My mouse scroll wheel increments/decrements at 2.4% per click of scroll.
I'm using Photoshop CC (2014.2.1), Mavericks 10.9.5 on MAC Mini and a Bluetooth Gearhead Mouse BT9400.
Same success with a wired optical mouse on a USB port. 2.4% per click of scroll.
Did you try a different mouse or USB port yet?

Zooming using mouse wheel ?

I just upgraded from PSE 5 to 9. One of the handy functions in PSE 5 was the use of the mouse wheel to zoom in or out of a picture that you're working on in the editing work space. Now it seems I have to use the brackets or the awkward zoom tool.
Is there a way I can activate/modify something so I can zoom with the mouse wheel? Thanks.
Also, the type on the pulldown menus is harder to read than in PSE 5 because the type is small and it's revered out of black. I'm going to explore the workspace in PSE 8. Maybe I upgraded too far.

Open a photo in "Full Photo Edit" mode.
Select Edit>Preferenes>General. Check the box that says "Zoom with Scroll Wheel".
Bob

Vertical Pinch Zoom with Logic 9 & Lion

Trying to figure out an easy way to do a vertical zoom in Logic 9 and Lion
Back in the old days (last week) when I used logic 8 and lepoard, it was easy with cntl up/dn (or something like that, my fingers know the routine)
The pinch work fine for horizontal zoom with the new setup, but how do I do a vertical zoom? (The old cntl/up thing doesnt seem to work any longer.)
Thanks!
Geoff

Greetings,
So far, everything seems as stable as before. Which doesn't actually mean its rock solid, but otherwise workable. I'm running a Focusrite Saffire Pro 24DSP with beta audio drivers. So far, everything is running well. I decided to jump into the 64bit work environment with Logic. I have yet to encounter huge problems with the 32bit audio bridge. Just making sure I bounce everything that is 32bit.
As for everything else within Logic, I can't say I hate Lion. Matter of fact, Lion seems buggier than Logic at the moment. Logic handles well in Lion, but Lion on its own overall is a different can of worms. I am mixed about a 10.7.1 update. Usually, it fixes something on the OS, but breaks something else in Logic.
I have faith that Lion will turn out to be as solid as Snow Leopard. SL was my favorite OSX so far. Lion still leaves allot to be desired in terms of stability.
Again, answer to your question: for me, Logic and Lion play nice.............for now.
LGK

"Zoom using scroll wheel while holding" is broken

Hello,
Since updating to Mac OS X 10.7 Lion this morning, the "Zoom using scroll wheel while holding" feature is broken.
In the mouse control panel the checkbox for "Zoom using scroll wheel while holding" is definitely checked. The default Control ^ key is selected. I verified I'm hitting the correct key on the keyboard using the keyboard viewer.
I've tried using this with 2 finger scrolling on my trackpack as well. I've also tried turning off most of the trackpack geustures.
I tried searching these forums prior to posting and found replies telling people with various different situations to turn this feature off. I want it on. I use it constantly.
I have a MacBook Pro Aluminum 13-Inch Mid 2010
Processor 2.4 GHz Intel Core 2 Duo
Memory 4 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 320M 256 MB
Software Mac OS X Lion 10.7 (11A511)
Any advise would be appreciated!
Thanks.

Hello. Original poster here. I can confirm a few things after observing for a few days and trying stuff.
1) The Universal access fixes did nothing. I set & reset those settings til I was blue in the face.
2) I tried a "Repair Permissions" with the Disk Utility. No luck.
3) It works intermitently. After sleeping sometimes it works. After plugging into my external monitor sometimes it works on the external monitor but then if I unplug it won't work again. After a reboot somtimes it works, then after sleeping stops working. Kinda strange. When it works it works from both my external USB mouse and the trackpad, so I don't think it's the hardware.
I don't have Time Machine configured - been using Carbonite, but they're not compatible with Lion so might have to get Time Machine running anyway - but it's not a fix per se, since this oughta work all the time.

13 in macbook pro (early to mid 2011) : after the update, computer freezes with spinning wheel every 30 seconds first with safari and now with all the applications. I don't have any programs installed and still had good enough memory on the RAM.

After the update of my 13 in mac book pro (early to mid 2011) , it freezes every 30 seconds with the spinning wheel and now it just freezes. Ive never had this problem until I recently updated. Also, I just checked now for available update ( which there was one), the update would process till the last step and it shows it cannot be expanded? Now my computer wont even restart (just have a grey screen with a cursor). Can someone please tell me what the heck is going on with my computer?
I also checked the memory and it showed available memory was over 1.5 GB. I dont have any programms installed and do not have backup yet ( dont really need it anyways)
Problems: first with spinning wheel every 30 seconds and now whole computer just freezes when I restart, it only shows grey screen after the starting sound or it takes about 8 to 10 minutes to restart.
This ALL happened right after the update with google chrome crashing. I know my apple care plan expired so I cant even go to genius bar. Do you guys know how much it would cost to get it fixed ? Or any recommendations I can do to fix this?

Try a smc reset:
http://support.apple.com/kb/HT3964

Shuts down after start tone and grey screen with pin wheel...!???

Hi all, first time here so please bear with me,
even though i have had my imac for so long now, i have only in the last three to four months started playing around with it, i really am a newcomer to macs, and pc's come to that! so far i have only connected up to the internet and put a couple of home video's onto dvd, and play music.
i have been reading a lot of the other posts and frankly i'm lost!
it is about 20 months old and was bought in the uk, i live in cyprus and for that reason i did not purchase an apple plan.
we do not have an apple store here although there is an apple dealer, however they are not soley apple and over here service leaves a lot to be desired! so i am reluctant to take it to them as they are likely to just keep replacing parts and eventually present me with a huge bill!!
anyhow this is the problem:
several times the screen went dim and froze, with a message saying to "push the power button to switch off and and then switch on again", it seems this happened each time when i opened azureus? after this happened a few times it would no longer open the desk top, it would load normally,ie. grey screen with pin wheel followed by blue progress bar and then just a blank blue screen, the blue tooth mouse however was still connected as the cursor would move. it has now changed again! start up tone and grey apple screen with pin wheel for about 30secs or so, then the fan seems to go into turbo mode for a few secs before switching off....i feel sick!! i was really getting to like my mac.
i did recently install tiger, but there were no problems at all with that and it is running on a friends apple with no problems at all, more recently i added more memory which coincided with when i started using torrentspy and azureus,
i did read in another forum something about possible memory probs, so i followed the tip to remove the memory and the back up battery and leave the computer unplugged for 24hrs, i replaced the battery but not the memory, i'm still getting exactly the same shut down result.....
can anyone shed some light on this pleeease? i'm feeling rather desperate right now.....thanks.
imac G5 20inch Mac OS X (10.4) airport card fitted, 1.25gig mem.

Hi ino,
My suspicion is that you have serious hard drive directory corruption caused by the crashes when using azureus.
First step is to see whether you can boot up from your Mac OS X DVD . Put it in the drive while its on, and start up the computer again while holding down the "c" key. The computer should now start up from the DVD.
Select the language you wish to use, and then choose "Disk Utility" from the menu bar (which menu it is in depends on which version of OSX you are using).
Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
If Disk First aid is able to complete the repair now click on the "Repair permissions" button.
Once this process has been completed try restarting the computer.
If it still doesn't work, you may have to try an "archive and install", while booted from the OSX DVD.
Be very wary with software like "azureus".
Cheers
Rod

One more nugget: Chart zoom with the "Mouse Over" effect

Hello all.
Just read my signature first, it might explain a lot. I do not intend to compete with Darren and I don't think this "nugget" (at least it supposed to be one) will amaze any of the LV veterans and this forum is rich of them. But maybe it will bring some new ideas to some of you or maybe it will be useful for some LV beginners (like me). It is very likely, my code will have some lapses, but please be gentle pointing that out to me. If you feel a need, you can always optimize the code and develope it further. Just don't forget to share!
So back to the point.
I am developing a project using LV. In my program there is a waveform chart which has to show 4 plots. Depending on the length of the X Scale, it sometimes gets hard to see the plots clearly because of their density.So I decided that I need a tool, which would zoom the chart in. And this is what I have came up with after a few "Google" searches to check which part of the bike is already invented and also a bit of programming by myself.
Maybe you guys (at least the veterans) know the BetterVIEW Consulting LV example where they have implemented the Mouse Over effect. So a part of their example has been used in this tool and part of the credit must go to them. I thank them a lot
This tool uses a cluster and its property of visibility to show/hide the cluster depending on if the current position of the mouse cursor is in the desired range or not. The program also gets the image of the chart and returns the subset of the image. The subset is taken for the area arounf the mouse cursor. So if you move the mouse, the zoomed in area will also chage in response. After that, the subset of the image is zoomed in for better view.
The user might chage the zoom factor during the execution. Also it is possible to turn the zoom option On or Off if you don't wish to see it for the moment.
This is how the front panel looks like:
And this is the image of the block diagram (see the attached files for the vi, the VI Snippet tool distorts the code too much, so I haven't added it):
I haven't found anything the same in the forum. Yet I'm a newbie here and I don't have that much experience surfing it. If it wouldn't be something new (in the forum, not necessarily to some of you personally), just ignore the thread. I hope this was worth your time and your attention.
Good coding
Message Edited by Giedrius.S on 02-11-2010 12:46 PM
While evaluating my code please have in mind that I am a LV novice. Therefore sometimes my code might violate some coding rules that I have to learn about myself. But how else could I do that...
Chart zoom with "Mouse Over" effect
Attachments:
Zoom.vi ‏198 KB
Mouse_pos.vi ‏20 KB
Check_pos.vi ‏18 KB

Very nice Giedrius.
It takes guts to "step up to the chalk board" so I will do what i can to give you some ideas to think about. This is similar to the type of feedback I offer durring our in-house code reviews.
1) The floating property nodes outside the loop are not sequenced by wires so they could execute after the loop starts. Sometimes this could cause weird errors. Seq with the error cluster.
2) Property nodes can be re-sized so you can apply more than one property setting in the same call. Property node have to execute in the UI thread (which is single threaded) so using a single nodes will force a single context switch rather than one for each.
3) Setting the same property repeatedly in a loop just burns CPU. THe Scale min for both X an Y can be moved outside the loop ?
4) THe Wait Until Next ms" function does not get used in any of my code. It is not a way to get a fixed wait but rather a random wait. If you code completes 1 ms after the next multiple, the delay is double less 1 ms. If you have multiple loops using them and it f the delay for each are not unique prime numbers, then the "Wait until next ms multiple" is a good (cough cough) way of getting them all to wake up at the same time and fight for the CPU.
5)An Event Struture to monitor mouse enter/leave and mouse move (this would have to be a sepearte loop) is easier on the CPU than polling.
6) Is that math in the case to handle the Chart position on the FP? If so then using the property nodes for the chart to find its postion will let you code adapt to GUI changes.
7) Right to left wires are not well recieved.
8) A Bundle by Name is prefered over a "Bundle" since it is self documenting. I know the Picture function so I can see that is the rectangle you are specifying but reader not famliar with that function would not be able to "READ" the code without poking at it.
9) THe event structure would also help with setting the Zoom factor. Only poke it when you have to.
That is all that comes to mind at the moment.
Again thank you!
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Enlarge a section of the screen or at least vertical zooming option

Isn't there in FCE the zooming funcionality of Logic (Zooming to enlarge a section of the screen to fill the whole window)?
And if no, is there at least a vertical zooming option?

I'm not sure I understand what you need.
In any case if you want to enlarge a section of the clip, you can use the Motion tab of the viewer: open the clip from the timeline into the viewer, open the Motion tab, change Center and Scale until the section you want is centered in the window and zoomed as required.
If you want you can also keyframe both Center and Scale to move them as you like.
As another possibility you can activate Image+Wireframe in the canvas, and while the clip is selected in the timeline you can drag the image in the canvas window to move its center, and drag one of its corners to change its zoom.
I hope this answers your question
Piero

Stuck at boot with spinning wheel for hours

Hello,
Yesterday I made a partition and cloned my Snow Leopard in order to see if Lion worked with the software I have.
I then booted to my "backup Snow Leopard" partition and upgraded to Lion but for some reason I'm stuck with spinning wheel for hours when doing the first restart. According from the install.log it seems that the install (upgrade) was done properly.
Jul 21 00:06:32 xxxxx Install Mac OS X Lion[290]: @(#)PROGRAM:Install PROJECT:Install-596.1
Jul 21 00:06:32 xxxxx Install Mac OS X Lion[290]: @(#)PROGRAM:IA PROJECT:InstallAssistant-197
Jul 21 00:06:32 xxxxx Install Mac OS X Lion[290]: Hardware: MacBookPro4,1 @ 2.50 GHz (x 2), 3072 MB RAM
Jul 21 00:06:32 xxxxx Install Mac OS X Lion[290]: Running OS Build: Mac OS X 10.6.8 (10K540)
Jul 21 00:06:32 xxxxx Install Mac OS X Lion[290]: Env: PATH=/usr/bin:/bin:/usr/sbin:/sbin
Jul 21 00:06:32 xxxxx Install Mac OS X Lion[290]: Env: TMPDIR=/var/folders/xR/xR+k4jQ-FzmBYLLAvxRwpU+++TI/-Tmp-/
Jul 21 00:06:32 xxxxx Install Mac OS X Lion[290]: Env: SHELL=/bin/bash
Jul 21 00:06:32 xxxxx Install Mac OS X Lion[290]: Env: HOME=/Users/xxxxxxxxx
Jul 21 00:06:32 xxxxx Install Mac OS X Lion[290]: Env: USER=xxxxxxxxx
Jul 21 00:06:32 xxxxx Install Mac OS X Lion[290]: Env: LOGNAME=xxxxxxxxx
Jul 21 00:06:32 xxxxx Install Mac OS X Lion[290]: Env: DISPLAY=/tmp/launch-81peVa/org.x:0
Jul 21 00:06:32 xxxxx Install Mac OS X Lion[290]: Env: SSH_AUTH_SOCK=/tmp/launch-7ZEpMo/Listeners
Jul 21 00:06:32 xxxxx Install Mac OS X Lion[290]: Env: Apple_PubSub_Socket_Render=/tmp/launch-Jxp1Tt/Render
Jul 21 00:06:32 xxxxx Install Mac OS X Lion[290]: Env: COMMAND_MODE=unix2003
Jul 21 00:06:32 xxxxx Install Mac OS X Lion[290]: Env: __CF_USER_TEXT_ENCODING=0x1F5:0:0
Jul 21 00:06:34 xxxxx Install Mac OS X Lion[290]: Using distribution archive from /Applications/Install Mac OS X Lion.app/Contents/SharedSupport/OSInstall.mpkg
Jul 21 00:06:34 xxxxx Install Mac OS X Lion[290]: Configuring products from SharedSupport folder
Jul 21 00:06:34 xxxxx Install Mac OS X Lion[290]: Using product <OSInstallDVDProduct> based on media at /Applications/Install Mac OS X Lion.app/Contents/SharedSupport at distance 5
Jul 21 00:06:34 xxxxx Install Mac OS X Lion[290]: Using product <OSInstallESDProduct> based on distribution at /Applications/Install Mac OS X Lion.app/Contents/SharedSupport/OSInstall.mpkg at distance 5
Jul 21 00:06:34 xxxxx Install Mac OS X Lion[290]: Checking Software Update catalog URL http://swscan.apple.com/content/catalogs/others/index-lion-snowleopard-leopard.m erged-1.sucatalog
Jul 21 00:06:35 xxxxx Install Mac OS X Lion[290]: No available package ref for compatibility update. Ignoring.
Jul 21 00:06:50: --- last message repeated 2 times ---
Jul 21 00:06:50 xxxxx Install Mac OS X Lion[290]: Using product <OSSoftwareUpdateCatalogProduct> from product keys 11A511_ServerEssentials at distance 25
Jul 21 00:07:11 xxxxx Install Mac OS X Lion[290]: diskUnmounted: disk0s2
Jul 21 00:07:11 xxxxx Install Mac OS X Lion[290]: diskUnmounted: disk0s3
Jul 21 00:07:11 xxxxx Install Mac OS X Lion[290]: diskUnmounted: disk0s5
Jul 21 00:07:11 xxxxx Install Mac OS X Lion[290]: diskEjected: disk0s5
Jul 21 00:07:12 xxxxx Install Mac OS X Lion[290]: diskMounted: disk0s2
Jul 21 00:07:13 xxxxx Install Mac OS X Lion[290]: diskMounted: disk0s3
Jul 21 00:07:44 xxxxx Install Mac OS X Lion[290]: IATool launched
Jul 21 00:07:44 xxxxx Install Mac OS X Lion[290]: Connected to IATool 1c9441c0
Jul 21 00:07:45 xxxxx Install Mac OS X Lion[290]: Preventing machine sleep.
Jul 21 00:07:45 xxxxx Install Mac OS X Lion[290]: Using product IA_PKSecureNetEnabledProduct <file://localhost/Mac%20OS%20X%20Install%20Data/> at distance 5
Jul 21 00:07:45 xxxxx Install Mac OS X Lion[290]: Using mutable product path: /Mac OS X Install Data
Jul 21 00:07:45 xxxxx Install Mac OS X Lion[290]: Retrieving 0 packages (0.000 GB)
Jul 21 00:07:46 xxxxx Install Mac OS X Lion[290]: Verifying InstallMacOSX.pkg/InstallESD.dmg
Jul 21 00:09:19 xxxxx Install Mac OS X Lion[290]: Finished operation queue
Jul 21 00:09:35 xxxxx Install Mac OS X Lion[290]: Extracting files from /Applications/Install Mac OS X Lion.app/Contents/SharedSupport/InstallESD.dmg
Jul 21 00:09:36 xxxxx Install Mac OS X Lion[290]: Extracting Boot Bits from Outer DMG:
Jul 21 00:09:37 xxxxx Install Mac OS X Lion[290]: Copied kernelcache
Jul 21 00:09:37 xxxxx Install Mac OS X Lion[290]: Copied Boot.efi
Jul 21 00:09:37 xxxxx Install Mac OS X Lion[290]: Ejecting disk image
Jul 21 00:09:48 xxxxx Install Mac OS X Lion[290]: Generating the com.apple.Boot.plist file
Jul 21 00:09:48 xxxxx Install Mac OS X Lion[290]: Linking self-contained dmg into mutable product
Jul 21 00:09:48 xxxxx Install Mac OS X Lion[290]: com.apple.Boot.plist: {\n    "Kernel Cache" = "/Mac OS X Install Data/kernelcache";\n    "Kernel Flags" = "container-dmg=file:///Mac%20OS%20X%20Install%20Data/InstallESD.dmg root-dmg=file:///BaseSystem.dmg";\n}
Jul 21 00:09:48 xxxxx Install Mac OS X Lion[290]: Done generating the com.apple.Boot.plist file
Jul 21 00:09:48 xxxxx Install Mac OS X Lion[290]: Blessing / -- /Mac OS X Install Data
Jul 21 00:09:48 xxxxx /Applications/Install Mac OS X Lion.app/Contents/Resources/InstallAssistantTool[321]: Blessing Mount Point:/ Folder:/Mac OS X Install Data plist:com.apple.Boot.plist
Jul 21 00:09:48 xxxxx /Applications/Install Mac OS X Lion.app/Contents/Resources/InstallAssistantTool[321]: ***************************** Setting Startup Disk *****************************
Jul 21 00:09:48 xxxxx /Applications/Install Mac OS X Lion.app/Contents/Resources/InstallAssistantTool[321]: ******           Path: /
Jul 21 00:09:48 xxxxx /Applications/Install Mac OS X Lion.app/Contents/Resources/InstallAssistantTool[321]: ******     Boot Plist: /Mac OS X Install Data/com.apple.Boot.plist
Jul 21 00:09:48 xxxxx /Applications/Install Mac OS X Lion.app/Contents/Resources/InstallAssistantTool[321]: /usr/sbin/bless -setBoot -folder /Mac OS X Install Data -bootefi /Mac OS X Install Data/boot.efi -options config="\Mac OS X Install Data\com.apple.Boot" -label Mac OS X Installer
Jul 21 00:09:49 xxxxx /Applications/Install Mac OS X Lion.app/Contents/Resources/InstallAssistantTool[321]: Bless on / succeeded
Jul 21 00:09:49 xxxxx Install Mac OS X Lion[290]: Restart requested
Jul 21 00:09:50 xxxxx /Applications/Install Mac OS X Lion.app/Contents/Resources/InstallAssistantTool[321]: Lost client connection: exiting
30 seconds after finishing the installation I restart and in verbose mode I get this log (sorry for the lousy quality, with was taken with my mobile).
I've tried everything.
Repaired permissions, disk.
Resetting PRAM, NVRAM, SMC.
I even left the MBP all night in this process to see if there was any progress. No luck.
Tried to enter safe mode but I only get a black screen and a new restart. (Something like PRAM)
What could be causing this?
In the past when I installed Snow Leopard (10.6) I had some issues with my firewire (they stopped working a few months ago).
I needed to boot to safe mode in order to finish the install of SL and remove these files from /System/Library/Extensions
IOFireWireSerialBusProtocolTransport.kext
IOFireWireAVC.kext
IOFireWireFamily.kext
IOFireWireIP.kext
IOFireWireSBP2.kext
Rebooting with this change shows that everything works properly (besides the dead firewire ports).
I don't know if the "spinning wheel" has something to do with my FireWire or Airport (which works fine in SL).. since it got stucked in there.

Finally!! I'm currently using Lion on my MBP.
With the help from members and macrumors I got this solution.
- Installed Snow Leopard on an external drive (by USB)
- Updated that partition to Lion from another macbook (I used macbook white).
After that I cloned the partition (without the FireWire kext files) with Carbon Copy Cloner to my MBP and... voila! :))
I'm replying to your message from Lion. Give it a try! If you don't have another macbook maybe a friend can help you.
I don't know if there's another method but this one is working!

Cannot sync iPod with click wheel to iTunes...

I cannot sync my iPod with click wheel to my iTunes on Windows. I have already attempted the five R's, multiple times, including restoring my iPod three times, and updating my iTunes software. But when I plug my iPod in, it takes forever to be recognized by iTunes, and just sits there, whizzing and clicking, with the "Do Not Disconnect" message blinking. After awhile, iTunes will download a song or two from my library, then quit. I often get a message that says my iPod is "corrupted." Help! How can I get my iTunes library back on to my iPod?

I am having similar issues. I have received lots of advice, none of which work so far but there is lots to try here. Good luck!
http://discussions.apple.com/thread.jspa?threadID=930956&tstart=0

IPod with click wheel not recognized by computer and doesn't show up in itunes. Have went through all the suggested tips and its not the cable.

ipod with click wheel not recognized on two separate laptops. Checked the cable and newer ipod shuffle works fine. Ipod will play already loaded music and play from a dock. Have went through the 5Rs and still not working. Any help appreciated.

Checked the cable and newer ipod shuffle works fine.
You're not trying to connect the iPod with click wheel using the short USB cable for the iPod shuffle, are you? If so, that won't work. The shuffle uses its headphone jack for the data connection. All other iPods use the dock connector, using a standard docking cable.

Vertical zooming with toggle wheel?

Similar Messages

Maybe you are looking for