Very annoying problem with parametric EQ

I'm having a problem in AA3 with the parametric EQ that is present on every track strip. I opened up a session to work on, and one of my drum tracks has an EQ curve set. When I try to alter the curve, it pops back into its previous position as soon as I hit play. It won't let me change it for some reason. I've had this happen a number of times with different songs now, and its extremely frustrating. Anyone else have this happen?

Douglas1984 wrote:When I try to alter the curve, it pops back into its previous position as soon as I hit play. It won't let me change it for some reason. I've had this happen a number of times with different songs now, and its extremely frustrating. Anyone else have this happen?
No, but you have to bear in mind that any change you make to the EQ has to be written to the automation system in order remain changed. If you put the track automation into write mode, and change any EQ settings at all, the changes all replay perfectly here. So I'd suggest having a look at the track's automation settings initially to resolve your problem.

Similar Messages

Very annoying problem since 1-2 years with "AllSport GPS" app and e-mail "terror" - please help!

Hi there,
I have a very annoying problem that occurs since 1-2 years. Now I want to get finally rid of this.
I bought the app "AllSport GPS" via BlackBerry App World in 2010. After the uninstallation of this app due to new devices one or two years ago I have the following problem:
On each (!) update of my list in the BlackBerry World app or after the reset and reload of the content of installed app I receive 1-5 (different amount) of mails with the following content:
AllSport GPS license key for your BlackBerry
Thank you for purchasing AllSport GPS from BlackBerry App World. The license key for your device is:
XXXXXXXXXX
This is VERY annoying! I also informed the publisher of the app (Trimble Outdoors) but they told me to contact BlackBerry. During the last 1-2 years - because I often refresh and look after new updates for my apps (I have many installed on my device) - I received, no fake, hundreds (!) of this annoying mails!
I bought the app with my older 9700 or 9790. In the meantime, on my Bold 9790, the app is not available any longer for this, so it is not shown in my BlackBerry World environment. In this case I could make a new clear installation and deletion of the app. But this is not possible.
It would be great if anybody of BlackBerry is reading this and could reset or delete the resending of this mail.
Are there other other thay also have this problem? Any suggestions?
Greetings from Germany
Daniel

Actually, this is a user-to-user forum. There are some BlackBerry employees who read these posts, but in most case you are only talking to other BlackBerry users.
So to solve your question, you will need somebody from BlackBerry, as most other users will not really be able to solve the problem. If you contacted BlackBerry Support, I guess the best thing is to wait for their answer. You can try tweeting to @BlackBerryHelp, in some cases they can reply to you faster. Or you can have their attention much faster.
I find it weird myself that you haven't contacted them before, as you say the problem is since a couple of years now.
I am afraid that you will not receive a lot more information on this forum (as this is a rather specific problem in my opinion). Except maybe if one of the BlackBerry employees on this forum notices this post.
I hope your problem is solved soon!
A like is always appreciated,
but a nomination for BB Elite even more :-)
You can also contact me on Twitter: @ndsmyter

Really really annoying problem with slooooow Adress Book

I have a really, really annoying problem with Address Book.
Ever since I connected it with the MobileMe service it has this problem, and I just cant get rid of it. I have tried logging out and back into the MobileMe service, resetting the sync history etc., but to no avail.
Each time I open the application it freezes for about 5 to 10 seconts, then that blooming annoying, Windows reminiscent, rotating rainbow circle appears for about a minute at a time. Then it goes away and the application works..........that is until try something demanding like adding a new group or changing a group name, then it starts over. It is making the Address Book almost unusable and very un-Mac-like.
Can someone please help???

Try deleting this plist:
(yourUserName)/Library/Preferences/com.apple.AddressBook.plist
As well, the general approach at this time is to ask if you've checked for any problematic fonts (all languages) with Apple's Font Book (look in the Applications folder). Find and remove all duplicates also.
Start there to be sure all fonts that are in play come out with a clean bill of health.
Also, don't hesisate to perform wholesale deletion of old and/or little used fonts - be skeptical of anything that has come from Office 2008, including those related to an Equation Editor installation.
By all means be sure your 3rd party apps are Snow Leopard compatibl

Apple Banned me, because of a very weird problem with my "Factory Unlocked"

Hi Everybody! Im having a very weird problem with my unlocked iphone 4.
First of all, i would like to apologize because of my english, is not very good. My native language is Spanish.
Well.. Im from Mexico, and here we can buy the iphone Unlocked on the Apple Online Store.
Here's my problem. Apple has exchanged my iphone 3 times.
I returned the iphone the first time because the screen was totally yellowish, other than that everything was working great!, that was by the end of September.
On October 20th, i recieved my second iphone, and then a bigger problem started .
Before i continue, let me give you this information: here in Mexico we have basically 3 cell phone companies
1.- Telcel
2.- Movistar
3.- Unefon
OK, now on october 20th, i recieved my second iphone, and then procced to activate via itunes using my UNEFON sim card (microsim).
And every time i tried to activate it, only got this message onscreen:
http://i148.photobucket.com/albums/s2/jorgelomeli/Screenshot2010-10-29at24915PM. png
I though something was wrong with my brand new factory unlocked iphone 4.
I have 4 more simcards from my brothers (they all had iphone 4 too)
I tried telcel sim card, and i could activate my iphone. Then i insterted the Movistar microsim, and it worked too!! But then when i put the Unefon sim, the itunes logo inmediatly appears on the screen asking to activate on itunes, and when i tried that, the only response i got was the image above saying " The Simcard inserted on this iphone does not appear to be supported"
Weird thing here is, that, when i put my Unefon sim card on my brothers iphone 4, it worked great! on all of them, internet 3g, phone, wireless , evrything!
I called apple support, and they exchange the iphone for another one.
I recieved the third iphone on October 29. Last friday. and guess what? SAME PROBLEM! different serial number, same week production (week 42) but exactly the same message on itunes.
Very, very frustrated, i called apple again, and after 1 hour with thechnical support, they told me " We are sorry, but we can only offer you, your money back, NO MORE EXCHANGES FOR YOU"
I said why?... i dont want my money back! i want an UNLOCKED iphone!, but they refuse to give me another iphone.
When i asked techincal support, why my unefon sim card worked great on all three of my brothers iphone but not on mine, he just told me, "I really dont know, i guess they just got lucky" ****, this answer put all my trust i had on apple products for years, right on the garbage.
Since they refused to give me another iphone, i accepted my money back, and inmediatly after i finished the call, i asked my brother to buy me one more time an iphone 4 using his name, and his credit card. Now i have to wait until November 8-12 to recieve my new iphone, hoping this time i get a REAL UNLOCKED iphone, and not a partially unlocked iphone.
btw. i even went to Unefon costumer service and bought a new prepiad line, with a new microsim, just to be 100% sure that this problem is not because of the sim. And again didnt worked on my iphone, but it worked on any of my brothers iphone4.
Serial numbers of the 3 iphones:
79039C0U* (this one worked great with Unefon, only problem was yellow screen)
85042GR4*
81042FJB*
What do you suggest me? any info would be really aprecciated
FYI i also restore 4 times the last iphone and nothing seemed to work, i use 3 different computers, Macbook Pro, iMac, and an Hp with Windows 7, and the same message on all three computers.
Wierd thing also, one of my brothers bougth an iphone 4 this last week too, but he bought the 16Gb not the 32Gb. His iphone production week is 42 also! and when i put my Unefon sim in his iphone works great!
I dont know what else i can do, I just need to have faith that my new iphone coming this november will be real unlocked, but what if i'll recieve an iphone and then the same problem?? time for android? just kidding really guys, what can i do? anyone with similar problem like me? i dont wanna use Telcel or Movistar, i wanna use Unefon, and thats why i bought an Unlocked iphone
btw: jailbreak is not a solution for me, because i always like to use legal software on all my apple products, and because of the warranty.

According to http://support.apple.com/kb/HT1937, there are two official carriers in Mexico (Movistar and Telcel) and neither carrier offers an unlocked phone.

Very annoying problem....

im having a very annoying issue with iTunes....
with almost evrery song in my library i try to play i get this message....
"The song "[whatever]" could not be used because the original file could not be found. Would you like to locate it?"
then i need to go find the song and all that mess.... not fun. what can i do to fix this? all the songs in my library are stored elsewhere on my computer, so why arent they playing?

Then your iTunes library file has most likely gotten damaged.
Info on library files:
http://docs.info.apple.com/article.html?artnum=93732
How to re-create your library:
http://docs.info.apple.com/article.html?artnum=93313

Very big problem with JSF about FORM and "id=" for HTML form's elements and

I have discovered a very big problem with JSF about FORM and "id=" for HTML form's elements and java instruction "request.getParameterNames()".
Suppose you have something like this, to render some datas form a Java Beans :
<h:dataTable value="#{TablesDb2Bean.myDataDb2ListSelection}" var="current" border="2" width="50%" cellpadding="2" cellspacing="2" style="text-align: center">
<h:column>
<f:facet name="header">
<h:outputText value="Name"/>
</f:facet>
<h:outputText id="nameTableDb2" value="#{current.db2_name_table}"/>
</h:column>
</h:dataTable>
Everything works fine...
Suppose you want to get the name/value pairs for id="nameTableDb2" and #{current.db2_name_table} to process them in a servlet. Here is the HTML generated :
<td><span <span class="attribute-name">id=<span class="attribute-value">"j_id_jsp_1715189495_22:0:nameTableDb2">my-table-db2-xxxxx</span></td>
You think you can use the java instructions :
Enumeration NamesParam = request.getParameterNames();
while (NomsParam.hasMoreElements()) {
String NameParam = (String) NamesParam.nextElement();
out.println("<h4>"++NameParam+ "+</h4>);
YOU ARE WRONG : request.getParameterNames() wants the syntax *name="nameTableDb2" but JSF must use id="nameTableDb2" for "<h:outputText"... So, you can't process datas in a FORM generated with JSF in a Servlet ! Perhaps I have made an error, but really, I wonder which ?
Edited by: ungars on Jul 18, 2010 12:43 AM
Edited by: ungars on Jul 18, 2010 12:45 AM

While I certainly appreciate ejb's helpful responses, this thread shows up a difference in perspective between how I read the forum and how others do. Author ejb is correct in advising you to stay inside JSF for form processing if form processing is what you want to do.
However, I detect another aspect to this post which reminds me of something Marc Andreesen once said when he was trying to get Netscape off the ground: "there's no such thing as bad HTML."
In this case, I interpret ungar's request as a new feature request. Can I phrase it like this?
"Wouldn't it be nice if I could render my nice form with JSF but, in certain cases, when I REALLY know what I'm doing" just post out to a separate servlet? I know that in this case I'll be missing out on all the nice validation, conversion, l10n, i18n, ajax, portlet and other features provided by JSF".
If this is the case, because it really misses the point of JSF, we don't allow it, but we do have an issue filed for it
https://javaserverfaces-spec-public.dev.java.net/issues/show_bug.cgi?id=127
If you can't wait for it to be fixed, you could decorate the FormRenderer to fix what you want.
I have an example in my JSF book that shows how to do this decoration. http://bit.ly/edburnsjsf2
Ed

HT1918 Hello! I Have very much problem with programs App Store! Refund please money too my account!!! Xilisoft dvd maker 7 don't work,Adobe Premiere editor 11 don't work!!! I fear purchase content out of App Store!!!

Hello! I Have very much problem with contents and programms App Store! Refund please me money to account!
1.Xilisoft DVD Creator 7 Dont Work
2.Adobe Premier Editor 11 Dont Work
I fear purchase yet programms out your App Store!!!!! Realy!!!
Wery Much ''go begging'' refund money Adobe Premier Editor 11! Best Regrads,Alexandr Cherepennikov! Sorry,wery bad my english!

We are fellow users here on these forums, you're not talking to iTunes Support (this is the iTunes Store forum), nor Mac App Store Support.
You've tried deleting and redownloading those programs, and tried contacting their developers ? If you have, and you haven't had a reply, then you can try contacting Mac App Store Supportv via this page : http://www.apple.com/support/mac/app-store/

I have a very big problem with my mac book pro. It continously looses the wifire connection. This happens every 5-10 minutes and is getting to be a very big irritation. I have tested my wifiresignal

I have a very irritating problem with my MacBook Pro. It keeps loosing the wifi connection - every 5-1o minutes!!!
I have testet the wifi signal and had my router checked - both are fine.
Please tell me what I can do :-(
John

First you should check on another Wifi to see if it's your Lion machine.
If it only occurs on your Wifi, then perhaps you have local interference and need to set the router on another channel far from others.
You can install a free program called KisMAC that you set your Driver Preferences to Apple Airport Extreme Passive Mode, enter your Admin password and monitor your local Wifi signals, see if you cna pin point the cause of your interference or meddler.
If your not running WPA2 with AES and a 12 plus random character/letter/number password for both Admin and Internet access use only then you should seriously consider doing so.
http://www.tomshardware.com/reviews/wireless-security-hack,2981-10.html

I have very strange problem with Iphone 3gs. Whenever it gets little hot or exposed to 30 degree temperature it losses signals (No service). Whenever it is cooled down the service is back. Please help!

I have very strange problem with iphone 3gs. Whenever it gets little hot or exposed to 30 degree or above temperature it losses signals (No service). Whenever it is cooled down the service is back. Whenever I am using Skype or playing game for a while it losses carrier signals and wifi. When it is cooled down afer shutting down the carrier signals and wifi are back. It is for sure problem is with heating, but 30 degree tempeature in Oman is normal and some time it goes upto 50 degrees. I have noticed this has started after I started using substandard charger as I lost my original charger of the phone. Please help!! Thanx.

The specifications define an operating range up to 35 degrees.

Help with Quicktime. (very annoying problem)

Hello,
I am a newbie to this forum. I searched the forum and couldn't find the answer I was looking for so here is my question. When I try to open either iTunes or the Quicktime player I get a error message that reads "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience." (it is one of those 'send error report' messages. Anyone who has windows has probably seen them before) Since it is happening with both Quicktime player and iTunes I can only assume that this is a problem with Quicktime. I have tried uninstalling and reinstalling many times. Every time I try to uninstall Quicktime it tells me "a fatal error has occurred during installation" and never uninstalls. The only way I can uninstall is to just remove all the program files. Has anyone ever experienced this before? I need help.
Thank you.
P.S. Also when I try to just uninstall Quicktime buy hitting the "uninstall quicktime message" it starts to uninstall and then says "The installer encountered errors before the requested operations for quicktime could be completed."
Message was edited by: outa_luck

if you are having issues uninstalling quicktime on XP, follow this guide:
Open the Program Files folder.
Right-click the QuickTime folder and select Delete and choose Yes when asked to confirm the deletion. Note: This folder may have already been deleted if QuickTime was successfully removed in steps 1-7.
Delete the QuickTime and QuicktimeVR files located in the C:\Windows\system32\ folder. Click Continue if Windows needs confirmation or permission to continue.
Right-click on the Recycle Bin and on the shortcut menu, click Empty Recycle Bin.
Restart your computer.
(from http://support.apple.com/kb/HT1925)
You may also want to use a registry cleaner to get rid of any quicktime references (or Use Regedit (ONLY IF YOU KNOW WHAT YOU ARE DOING))

Extremely annoying problem with user folder name in windows 8.1

Here is the thing:
Friend of mine bought the laptop (very strong and expensive asus - republic of gamers) with installed windows 8.1 on it, but after a few days only I bought that computer from him because he didn't need it and he didn't use it at all!
But, his name stayed in the windows. I changed all user accounts names and everything which was possible to be changed, but when i go to C/users his name is still there on folder!
I can say it is very annoying because that laptop cost almost 3.000 USD and I still need to look at someone else's name in my user folder!
I tried to change "ProfileImagePath" in: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\ .... but after that windows logged in as a temporary profile and I spend another hour to figure out
how to reverse the thing!
How is possible that some so basic and simple things can't be changed at all in newest windows??? Only because some name was entered first it's not possible to be changed ever again???? Seriously?
Not only this problem, there is too many problems with this windows 8.1! Too many! You definitely made the worst thing ever!
I am extremely unhappy and upset with this operative system! I,m cursing the day when i gave so much money for computer with crap called windows 8.1!!!!
Very very angry!!!
(P.S English is not my native language)

Hi,
According to your description, it seems that you have resolve that issue.
Not only this problem, there is too many problems with this windows 8.1! Too many! You definitely made the worst thing ever!
Please let us know what problem did you encounter? Please give us more detailed information in order to provide the further help.
Here is a overall guide for you to know well the Windows 8.1
Windows 8.1: frequently asked questions
No Karen, I didn't resolve the issue.
I asked very simple question how to change something so basic like user folder name in Windows 8.1
You know: "C:/Users/"user name"
All the links you are giving to me doesn't provide any concrete answer to this question. I spent hours and hours googling and researching about this question and only solution which i found is that i need to create completely new user account and delete completely
the old one, just to be able to remove an old name of user folder! Are you kidding me?
How is possible that such a basic thing is so complicated?
Is there any way to change folder user name in any other way because i don't want to create a new user account!
Simple question, but, like always, no any concrete answers - just some empty talks, and totally useless links and SPINNING IN THE CIRCLE all the time without the CONCRETE solution.
As for part of my post which you quoted, and your request for more informations in order to provide me further help, i just gave it to you again. I want to change user folder name. What you don't understand in that question?
UPDATE:
Ok, i came back to edit this post because i have a feeling that maybe you don't understand the question and giving me this link because maybe you simply don't know that when you go to:
Control panel/user accounts/change your account name... and change the name, and after that, when you go to C:/users, the folder with the user name still have an old user name. Which means that any changes in control panel or anywhere else doesn't make any
changes on C:/users/ folder itself!!!!!
In previous windows versions was possible to change it by editing "ProfileImagePath" in:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\ ....
But when I try to do that in Windows 8.1, when I reboot computer it logs in with some temporary account, so i need to reverse everything to be able to use computer with the real account!
So basically it seems that is absolutely impossible to change user folder name in Windows 8.1, which is simply unbelievable!
I really think i explained very good now.

Annoying problem with shift key in limit dialog Brio 6.6.4

<p>My company uses Brio Insight & Designer v6.6.4. We (meaning almost all users) are encountering an annoying problem whenadding a limit to a query using the limit dialog. When try toenter a limit value using the shift key, as in Shift T to enter acapital T, the limit value field ends up with a value like"TTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTT". Thisis very annoying and widespread problem with us. It seemed tostart when we upgraded to Win XP SP2. Is there a solution forother than to "upgrade to the latest version"?</p>

Unfortunately not. The only way we avoided this issue was to upgrade or write the text into a text editor and cut and paste the text into the section name box.

I have Lion and iCloud. There are two very annoying problems. mFirst, in the middle of writing or research the window gets yanked to the right. Sometimes it can be retrieved and sometimes it can't. sec on, in the course of research on Safari, or work

I have recently upgraded to Lion and iCloud. There are two very annoying quirks that i don't know how to fix:
1-When working with word, documents or emails in the middle of a sequence the picture or window suddenly is yanked off the screen to the right. More often than not it can't be retrieved. This happens often
2-In the same mode as in #1 above the print size will suddenly increase maybe by a factor of 3x or 4x. it happens spontaneously.
3-There are many other problems with the upgrade:
-With sequence emails the secondary emails are not printed. When one tries to open those emails it often fails.
-The new address book format is crap. it is very difficult to go from single listings to group listings and back.
It's obviousto me the Apple software designers are not users.
So how can i fix #1 & 2 above.

> When working with word, documents or emails in the middle of a sequence
> the picture or window suddenly is yanked off the screen to the right.
Microsoft Word? What version and service pack?
Microsoft Office 2011 SP2 includes Word version 14.2.2. Some Office 2011 updates addressed problems with Lion.

VERY annoying thing with XServer "Can't open display" after a while

This issue is *very* annoying I would love if someone could help.
I had this issue for a long time, thinking I'll fix it. I googled, but everybody seems to have the same problem, but no fix (only temporary ones).
So here's the problem : I installed archlinux on my (very old) laptop, everything works great, now I even installed the XServer, which however is causing this problem:
everything works good for a while, but after a while, I can't launch any new programs, but existing ones work good... If I try to start any X-App in an already running terminal, it gives me:
No protocol specified
xterm Xt error: Can't open display: :0.0
However, all already running apps run fine, they even can create new windows!
The only fix I found for this is to kill & restart the xserver with ctrl+alt+backspace.
Here's my xorg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "ServerFlags"
Option "AutoAddDevices" "False"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "extmod"
Load "xtrap"
Load "glx"
Load "dbe"
Load "dri"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "probe_sparse" # [<bool>]
#Option "accel" # [<bool>]
#Option "crt_display" # [<bool>]
#Option "composite_sync" # [<bool>]
#Option "hw_cursor" # [<bool>]
#Option "force_pci_mode" # [<bool>]
#Option "dma_mode" # <str>
#Option "agp_mode" # <i>
#Option "agp_size" # <i>
#Option "local_textures" # [<bool>]
#Option "buffer_size" # <i>
#Option "tv_out" # [<bool>]
#Option "tv_standard" # <str>
#Option "mmio_cache" # [<bool>]
#Option "test_mmio_cache" # [<bool>]
#Option "panel_display" # [<bool>]
#Option "reference_clock" # <freq>
#Option "shadow_fb" # [<bool>]
#Option "sw_cursor" # [<bool>]
#Option "AccelMethod" # <str>
#Option "RenderAccel" # [<bool>]
Identifier "Card0"
Driver "mach64"
VendorName "ATI Technologies Inc"
BoardName "3D Rage LT Pro"
BusID "PCI:0:5:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Here's lspci of my VGA controller (this is probably irrelevant, because people will all sorts of hw have this problem, but here it is anyway):
[x@y ~]$ lspci | grep VGA
00:05.0 VGA compatible controller: ATI Technologies Inc 3D Rage LT Pro (rev dc)
XServ version:
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH i686
Current Operating System: Linux 2.6.28-ARCH #1 SMP PREEMPT Sun Feb 8 10:13:45 UTC 2009 i686
Build Date: 17 December 2008 08:20:05PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
I would be grateful if somebody could help me.

Just to let you know, I updated X to the latest version right now.
Here's the new output of X -version:
X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux 2.6.28-ARCH #1 SMP PREEMPT Sun Feb 8 10:13:45 UTC 2009 i686
Build Date: 15 April 2009 11:09:10AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.

Annoying problem with Stone Plu

Hi there, there is this really strange problem I have with my Zen Stone Plus...whenever I plug it in ALL the music files on my computer transfer onto the stone immediately. I did not order them to do so! I don't want ALL of those files on my stone!! If I want them there I'll put them there!!! I constantly have to delete the folder and it is VERY VERY annoying!!!!!! How can I get around this problem I'm sure there is an easy fix for it.....

You seemed to prepare the file pattern correctly but it might only be a preview artifact.
Did you save it as a pdf and open it in Acrobat to see if it is only an artifact of the preview?
Here is ai with the artifact
But this is how it shows up in Acrobat with no artifact, if you have a postscript printer you can test it by printing it on the postscript printer and that should verify what you see in Acrobat. If you also see this artifact in Acrobat perhaps it is the way you prepared the pattern.
It won't let me upload the Acrobat screen shot at the moment but the artifact is gone.

Very annoying problem with parametric EQ

Similar Messages

Maybe you are looking for