Very bad HDR photo.
Hello. Why HDR mode the photos are always blurry? Why, compared to Sony xperia M2, in Z1 Compact the minimum dynamic range? Simple: Z1 and M2 HDR.rar and HDR photo (Z1 compact).
In Xperia m2 much better result on HDR Mode. Fix it, please!
P.S Sorry for my english.
When you use HDR it's more important that you hold the phone still and that what you're shooting doesn't move. HDR takes two pictures at different settings which are then combined. If you move the camera just a little while the phone is taking the two pictures or if something moves you will get a blurry picture.
The cameras have used different settings when you took the pictures. Not sure why that is but to get a more similar result you can try the manual mode and manually adjust the settings.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.
Similar Messages
-
I have lupus and am extremely photo sensitive. I have a filter on my laptop screen that blocks out 99% of UVA and UVB rays (otherwise I have very bad flareups). Does anyone know if there is a similar filter for the iPad? I have searched, but still have not found anything.
Here's one http://www.mobilefun.com/28385-martin-fields-screen-protector-twin-pack---apple- ipad-3-ipad-2.htm
There are others if you do a Google search using ipad screen protector block uv rays
Cheers, Tom -
The SOLUTION to bad iDVD Photo Quality
I have been a fairly silent member of this forum for a long time now, and have seen many supposed "solutions" with the known issue of how iDVD compresses, and ultimately destroys, image quality in DVDs. Granted, much of this compression is normal, considering a full-quality photo from iPhoto looks quite different after being smashed into the standard NTSC 720x480 format of a DVD and compressed to a variation of MPEG-2. That being said, this workaround has been well-tested, and will give you a very high quality slideshow that you can play on your TV. (take note that low quality TV will come into play in making the final product look bad, not the slideshow itself!)
NOTE: I only tested this in iPhoto 6/iDVD 6 on a 10.4.8 PowerMac G5. I would love to get confirmation it works on Intel Macs and other machines.
1. Select an album or group of pictures in iPhoto
2. Go to File > Export and click the Quicktime tab
3. You will have several options...
- Width/Height: Defaults to 640x480 (4x6 image). This will result in about 100kb per image file, which gives you over 90 pictures for a 10 MB slideshow that you can e-mail to your friends.
- Display image for: Obviously controls how long each image is displayed in the slideshow.
- Background: Can be an image or a color. This is what you will see as a border if the slideshow image is smaller than the window.
- Music: This is actually kinda complicated. What is the "currently selected music?" When you select an album and press the "Play" button to do a quick slideshow, there is a tab for Music. Whatever is selected here will be added to the slideshow when you export it.
4. Click 'Export', choose the filename and location, and then save it.
The resulting Quicktime file will be quite small, while still retaining the quality of your images. It uses a default crossdissolve transition that can't be changed. It keeps this quality when you drag the Quicktime file into iDVD and burn a disk/save a disk image.
Downsides...
- no ken burns
- can't use different transitions
- no other advanced slideshow options
But it gets the job done! If you're wondering why this works while other methods don't, it's all in the .Mov container that's created. If you open the file in Quicktime and got to Window > Show Movie Info, you will see that it lists each JPEG within the package, along with a transition component. It doesn't compress the images into a video file, but rather references the original images within the .Mov package! Cool huh?
Let me know if this works for you guys. I've offered this advice to many people with good results, which is why I'm posting it here.
smi1ey =)Smiley,
What you suggest isn't really a SOLUTION to bad iDVD photo quality, because you aren't creating a DVD that can be played back with a DVD player.
You are simply suggesting an alternate approach for distributing slideshows which requires the receiver have a computer. iPhoto/iMovie give you several options on prepairing slideshows/movie for various methods of distribution (CD, email, etc).
Some DVD players will also play jpg files from a CD or DVD and that avoids the mpg-2 compression quality loss, but a TV set image is still a TV set image.
which gives you over 90 pictures for a 10 MB slideshow
A lot of email programs aren't happy with a file that size, and of course, since you have created a QuickTime movie, your PC friends will also need to install QuickTime. The Flip4Mac Studio application will let you convert your QuickTime movie to a WMV movie for those with PCs.
I'm glad you found an approach that you are happy with.
If you open the file in Quicktime and got to Window > Show Movie Info, you will see that it lists each JPEG within the package, along with a transition component. It doesn't compress the images into a video file, but rather references the original images within the .Mov package
BTW, there are several different CODECs that can be used in the .MOV file container - Photo JPEG is just one.
QuickTime Pro offers more saving options than the standard version, so I recommend you invest in QuickTime Pro. You will be able to create your slideshow directly in QuickTime Pro.
F Shippey -
Why lumia is very bad os then ever
No photo upload on web directly
no Bluetooth sharing for video
network connection is very bad
no more app than android
why all apps are working in sand box
video sharing not allowed in WhatsApp or any app
some time automatically restart
3g network is very bad
all app are installing in phone memory only why not in mmc
music are double triple in play list
no mkv,flv video player
YouTube videos not playing in desktop mode
web browsing is very bad in Lumia writing copy paste. Is very bad
no rename function in lumia for any file
no file manager for lumiaHave you even looked for any answers above yet? Because there is answers!
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520 -
( Additional ) Bad Quality : Photos Imported from iPhoto6 to iMovie 6
Although imovie 6 is caught up with a sum of disadvantages of imovie
5, I observe a new disadvantage which did not exist before.
With knowknowing:
In the "multi-media" mitre + "photographs", when I import
a photograph from iphoto, I observe that the image which is transcribed
in the screen of the visual display of imovie 6 is of a perfect
quality.
For example, a photograph taken with 3,5 Méga pixels with a
weight of 2 Mo. PRECISION : !!!!!! ( FORMAT IS JPEG ) !!!!!
The image is perfect, and in the internal adjustments
with imovie 6 that they are with or without the effect Ken Burns,
it seems the original.
However when I decide to apply it in the
timeline and that I it replay in the visual display, I note that the
quality of the image was strongly degraded ( very bad quality).
There are somebody in the specialists or the helpers who can give me explanations and how to cure that,
because this disadvantage is strongly regrettable and detrimental for me.
Thanks to you.
powerbook G4, 17", 1,5 G Mac OS X (10.4.6)Hi pierre - here are some more useful references:
Still Photo Quality in iMovie:
http://www.sjoki.uta.fi/~shmhav/SVCDon_aMacintosh.html#slideshow
http://discussions.apple.com/thread.jspa?messageID=961100󪩌
http://discussions.apple.com/thread.jspa?messageID=971053󭄭
http://discussions.apple.com/thread.jspa?messageID=961093󪩅
and maybe especially:
http://discussions.apple.com/thread.jspa?threadID=245638&tstart=0
http://discussions.info.apple.com/webx?[email protected]@.68be025d/13
and from Karl Petersen – to create Best Quality Still Pic for iMovie:
http://discussions.apple.com/thread.jspa?messageID=1921544#1921544
The main point to keep in mind is that before importing your photos, you must have the Ken Burns effect turned on in order to achieve the best quality. Also, remember that the iMovie screen is just there for editing purposes, and does not display the clips at full quality. -
Usability is very bad after latest web page update:
- upload doesn't show user name anymore, it's impossible to know which channel is who's
- if mistake with channel name and want to transer/delete photos, you need to do that separately for each image very S...L...O....W....L....Y. No more multi-image selection.
=> never seen so bad user experience. CongratsFully agree-dreadful.No multiselect so pics have to be deleted one at a time! Also cant set a filter to see which media are in channels (albums). Also full pics are gone. Really hard to believe. All for what ? Anyone see any advantages ? I for one cant and am now on the look out for another provider.
Dave -
Fios Internet connection is very bad! Please help!
Hello,
I play an online game called Final Fantasy XIV. I use a program called WTFast in order to have a solid gaming experience, one without or very little lag or disconnects.
Recently, within the last 3-4months, I have noticed I get EXTREME lag and DISCONNECTS. I contacted WTFast with a tracert that they analyzed, and here is their response:
"Your internet connection is very bad. There is a "plateau" spike. This will cause WTFast to spike as well, and for such a long "spike" it is not surprising that the connection was dropped.
The previous report showed a very unstable internet connection as well (the one where you got a 30 second freeze).
Present the same reports you sent to us to your ISP (Verizon FIOS) and ask them to try to make their connection better. The report will help them see the quality of the current connection."
Here is the information in the more readable form (except for the last four as I figured you would probably get the idea by then). Yes, 4 shows 100% packet loss, so the connection dropped then. Also, in 5 the standard deviation is high (16.35 ms) which indicates a huge fluctuation in the signal. The flux column also shows large numbers, which indicates a large variance in the signal speed. Finally, there are a lot of hops just within the ISP, ie rows 2-8, and all this data is for the ISP itself, not the WTFast connection. In fact, that connection is the last one, and there you can see good numbers. Hope this helps.
015-02-25 00:09:36
Hop Name No. Loss % Sent Received Best (ms) Avg. (ms) Worst (ms) Last (ms) Spikes Flux (ms) Std.Dev (ms)
Wireless_Broadband_Router.home 1 0.00 497 497 0 0 12 0 0 0 1.67
lo0-100.PHLAPA-VFTTP-304.verizon-gni.net 2 0.00 497 497 3 8 84 7 4 72 8.39
T1-1-0-5.PHLAPA-LCR-21.verizon-gni.net 3 0.00 497 497 4 8 19 9 0 0 2.51
—— 4 100.00 —— —— —— —— -1 —— —— —— 0.00
0.so-6-0-1.XL3.IAD8.ALTER.NET 5 0.00 497 497 10 19 137 12 12 92 16.35
TenGigE0-6-0-4.GW1.IAD8.ALTER.NET 6 0.00 497 497 11 18 50 18 0 0 4.68
teliasonera-gw.customer.alter.net 7 0.20 497 496 12 24 43 27 53 30 3.80
cloudflare-ic-309918-ash-b2.c.telia.net 8 0.00 497 497 10 14 46 13 0 0 3.04
Target WTFast.com 9 0.00 497 497 9 12 25 12 0 0 1.94
February 25, 2015, 11:56
I did a tracert from my computer to sites like MSN.com; Verizon.com etc, and EVERY SINGLE 4 shows a 100% loss. I did the same tracert from my computer at work that uses a different IP provider, and those same sites show a response from 4.
Can anyone help me out with this please! Thank you for reading!bap4201 wrote:
I'm trying to, but can't seem to format it properly
Open a command prompt and enter the tracert command
then select the cmd prompt icon - top left of the cmd prompt window
select edit, mark
highlight the data you want to copy - the tracert data
select the cmd prompt icon again
select edit copy
put the cursor in the post window in the forum
and hit ctrl-v - as below
C:\Users\Peter>tracert wtfast.com
Tracing route to wtfast.com [190.93.243.228]
over a maximum of 30 hops:
1 <1 ms <1 ms <1 ms Westell [192.168.1.1]
2 3 ms 2 ms 3 ms L101.BSTNMA-VFTTP-66.verizon-gni.net [96.233.107
.1]
3 7 ms 6 ms 6 ms G102-0-0-3.BSTNMA-LCR-22.verizon-gni.net [100.41
.212.48]
4 3 ms 3 ms 3 ms so-5-0-0-0.BOS-BB-RTR2.verizon-gni.net [130.81.1
51.220]
5 11 ms 12 ms 10 ms 0.ae11.XL4.NYC1.ALTER.NET [152.63.20.117]
6 * * * Request timed out.
7 37 ms 28 ms 43 ms 3.et-2-0-1.TL2.NYC1.ALTER.NET [140.222.227.34]
8 20 ms 21 ms 23 ms TenGigE0-7-0-1.GW5.NYC4.ALTER.NET [152.63.17.66]
9 12 ms 10 ms 11 ms teliasonera-gw.customer.alter.net [152.179.163.1
78]
10 13 ms 13 ms 11 ms nyk-bb2-link.telia.net [213.155.130.244]
11 11 ms 11 ms 12 ms nyk-b2-link.telia.net [213.155.130.30]
12 12 ms 17 ms 19 ms cloudflare-ic-309915-nyk-b2.c.telia.net [62.115.
52.174]
13 11 ms 12 ms 11 ms 190.93.243.228
Trace complete. -
The application DOCS doesn't work. Doesn't have HELP. it is very bad. Help me. My ID is regobarros.thanks in advance
Also it was not and never has been jailbroken if that helps.
-
Hi, How do I export HDR photos made on a macpro with photoshop cs5 onto a flashdrive so they can be imported correctly into a windows machine that doesn't have photoshop installed on it? Already exported to a HP flashdrive but they do not even show up on a windows machine. Need that capabillity since this is for commercial printing. My wife's mac laptop only shows 3/4 of the picture the rest is grayed out. Adobe support claims it is a Apple problem. Love the finger pointing and hold me blameless atitude on their part. Told them creating a picture should be like gas that can be used in anybody's car, just not their Adobe equipped ferrari. Do I need to convert the file struture so it can be read by the window machine? How would I do that ? Any comments appreciated. Doug
I certainly wouldn't expect to read native PS CS5 files with all features intact and supported on a machine that doesn't have CS5 installed. Try saving the files as flattened (no layers) TIFFs before moving them to the flash drive and trying to open them on the Windoze box.
-
Error message: "Warning: unresponsive script". Afterward, the system freezes and will then crash. Crash reports have been submitted many, many times without response. I have tried the fore-mentioned solutions with either no results or very bad results which I filed a report but did not receive an answer. The application to block scripts actually worsened the problem and I could not correct the situation for a while (no response from Firefox, at all). I have also been through this procedure without any one contacting me, AT ALL.
== URL of affected sites ==
http://http://www.facebook.com (always) and www.YouTube.com (sometimes)There does appear to be any support whatsoever from mighty "non caring" FIREFOX & people are getting fed up. We may as well try another system, if they can't be bothered to provide any support for their system, we can't be bothered to use their system.
Brianeng -
When I phone people can hear me without any problem, but I hear very very bad. The sounds is metallic and it is very difficult to understand. Have anyone idea of what is it about. I guess is not a software problem but I am not an expert. Thanks in advance
Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Firefox > Preferences > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
See also:
*http://kb.mozillazine.org/Images_or_animations_do_not_load
*https://support.mozilla.org/kb/Images+or+animations+do+not+show -
I am a macbook pro user form last 2 yrs, recently i upgraded to Mountain Lion from Snow leopard. Since then operational speed is a major concern. Now It has crashed so very badly that I am scared of my data.Please help me.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
I have an iphone 4, with ios 4.3.3. I want to update it but when I connect it to itunes it says that it is the latest version of the software. So I cannot update it, and I need it very bad. Can anyone help me?
What version of iTunes do you have installed? If you are trying to update to iOS 6 you need iTunes 10.7 or later.
-
bought i phone 6 64 GB just 3 days before performance is very bad.Couldn't even open app store it takes too much time for opening a web page.
You may need to reset your network settings, making sure the network you're accessing is stable: tap Settings > General > Reset > Reset Network Settings.
If your iPhone still can't connect to App Store, tap Settings > iTunes & App Store > tap the Apple ID and sign out > later, sign in with your Apple ID. -
When I download Microsoft word documents (if have word 2007), I have somehow changed the settings and it downloads them in wordpad, and the format is very bad and I can't read a lot of the document. How do I change the default setting back to using Microsoft Word 2007 to open these documents?
== This happened ==
Every time Firefox opened
== about a few weeks ago - I had tried to open some docuuments saved on a mac, my PC (which runs Windows 7), used word pad to open these, and this seems to have changed the default settings somehow.See this:
[http://support.mozilla.com/en-US/kb/Managing+file+types]
Maybe you are looking for
-
After getting iCloud the iCal on my mac does not sync with my iPhone calendar. All of my calendar notes are in my iPhone (while the mac's Ical remains empty) so I need to backup the iphone version. How? Itunes says that "your calendars are being sync
-
How to download Flash Builder beta on a bad connection?
I'm on a slow, unstable connection and 1gb is pretty hard to get without stalling and resuming multiple times, but resuming doesn't seem to work in labs for some reason - maybe my session times out? I usually use Free Download Manager to handle big f
-
Java user-defined transaction management not working correctly???
Hi everyone, I have encountered a problem when using Java user-defined transaction management in my session bean. It threw an exception but I could not work out what that means. Could anyone comment on this? Thanks. This BrokerBean is a stateless ses
-
Hello, I am having some issues with using CC Particle World. I can't seem to get the particles to appear on my screen. I move the timeline to get the particles to appear but nothing shows up. The 1st image is what I am trying to achieve and the secon
-
Hi, We have a weblogic 10.3.2 installed with FMW 11.1.1.2(PS1). I am trying to upgrade it to weblogic 10.3.5 and FMW 11.1.1.5(PS4). I read that to upgrade the existing weblogic 10.3.2 to 10.3.5 we need to use a separate upgrade installer. http://docs