Very bad luck with the second I phone 5 in this month :(

hello .....  i'm living in dubai ... ia have bought I phone 5 from etisalat but it was not contail facetime application ... so i bought a nwe one from the market but with international warrenty ... now i can hear sound like a screw not tight ... od one nut is loose .... please advice

Take it for service under your "international warranty"; whatever that is. If you got it from a non-authorized source (the "market") in Dubai then I wish you good luck getting service.

Similar Messages

  • I have a very bad problem with java I try many solution but all the solution failed

    Hello friends,
    My system  10.8.3 Macbook pro
    I try many solution in the 
    Hello friends,
    My system  10.8.3 Macbook Pro, I use Safari 6.0.3
    Java is not working.
    I try many solution in the  internet but nothing work with me , And I feel very sad
    One of the famous solution I try in this link: http://support.apple.com/kb/HT5559
      I download Java OS x 2013-002 and Java 7.17
    after that i do what is written here : http://support.apple.com/kb/HT5559 Also failed.
    Sometime I think to sell my new Macbook Pro because of this problem
    I hope that any one can help me ?
    Thank you
    Soso

    I check what java I have by this way: https://service.parachat.com/knowledgebase/211/How-do-I-check-which-Java-version -is-installed-on-my-Mac.html
    java version "1.6.0_43"
    Java(TM) SE Runtime Environment (build 1.6.0_43-b01-447-11M4203)
    Java HotSpot(TM) 64-Bit Server VM (build 20.14-b01-447, mixed mode)
    sos-macbook-pro:~ so$

  • Having bad luck with new PSUs again

    Hi,
    I just recently bought an Antec 430w truepower PSU to replace my old Qtec "550W" psu since the Antec 430 w has greater max currents as I am going to upgrade my video card and add an extra HDD.
    When I try to run CPU-intensive programs, my system eventually halts with the Antec power supply installed, with the Qtec, everything ran fine. This is running a program I made that utilises the video card (open GL application)  whilst running winamp.
    My system is:
    MSI K7N2 Motherboard
    Ahtlon AMD 2600+ 333 FSB
    512 MB DDR 3200 (400 Mhz)
    1 HDD
    2 CD/CDRW drives
    also:
    Geforce 3 ti 200
    Soundblaster Live soundcard
    onboard network
    floppy
    Antec truepower 430W or Qtec "550W" dual fan gold.
    I took results using MSI PC Alert before hand from the Qtec power supply and when I got the Antec I took similar results. The results are for the CPU vCore, 3.3v, +5v & +12v rails.
    ===============================
    Qtec:
    Code: [Select]
    QTEC 550      vcore        3.3          +5           +12
    idle          1.63+/-0.02  3.37+/-0.04  5.12+/-0.01  12.03 +/- 0.03
    active        1.62 to 1.65 3.33         5.13         12.00
    Qtec proved stronger than Antec...
    ===============================
    ANTEC 430 TruePower (case open)
    Code: [Select]
    ANTEC 430 TP  vcore        3.3          +5           +12
    idle          1.67+/-0.03  3.29+/-0.03  4.97+/-0.01  11.94 +/- 0.0
    active        ----------------- SYSTEM HALT -----------------------
    ===============================
    MAX AMPS
    Code: [Select]
          Q-Tec 550W   Antec 430W TP
    3.3        20            28
    +5         35            36
    +12        14            20
    This can prove that either my Antec powersupply I received is not doing the business (430 W) and is not as good as Qtec "550 W", Why? I don't know if I should take it back and get a replacement since it boots up my machine fine, just the rails are very weak for the Antec which is supposed to prove stronger than the QTec.
    What should I do if I want to add new peripherals to the system? Going back to the old Qtec 550 will work for me :P

    alright 12v pin in, didnt do any good, probably made it worse.. my screen jittered upon startup which was the sign of the power going bad (which was happening before the system halt before). Replaced it back with my beloved old Qtec   everything working fine and back to normal.
    I may note that while taking both results the 12v pin was not used.
    The antec would not give enough power somewhere resulting in a halt, probably to the video card or something. I'll stick with my Q-tec for now and install this video card and see what happens, I've removed one CD drive (which wasnt working anyway) lets hope that can compensate for the extra current needed?
    The new video card is the MSI 59000xt Vtd-128 Btw  

  • TS1398 Got the dreaded no wifi on my wife's iPhone 4S. Wifi greyed out and no luck with the reset network instructions. Why isn't Apple addressing this issue? We are a family of Apple product users, 2 ipads, an ipad mini, 4 iPhones but one isn't working!

    Got the dreaded no wifi on my wife's iPhone 4S. Wifi greyed out and no luck with the reset network instructions. Why isn't Apple addressing this issue? We are a family of Apple product users, 2 ipads, an ipad mini, 4 iPhones but one isn't working! Issue began whenwe upgraded the operating system.....
    Come on Apple.....get this issue sorted out!

    Just out of warranty. This is a software issue. everything was ok until the software update. Apple just need to sort it out.

  • Communication Problem with the second battery

    Hello,
    In Lenovo Solution Center it says that there is communiction problem with the second battery. I already had this problem some months ago, back then it didn't charge the second battery. I got a new one and it worked again. Now it says the same thing "communication problem", but i can charge the battery and I also can't find any other sign of something not working. But still- it seems weird that the program tells me something is wrong. Can somebody help me?
    Thanks Lina

    Hi, Lina
    What is the machine type and model of your computer? Also, what operating system are you running?
    Thanks in advance,
    Adam
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

  • HT4759 Is it true that when setting up devices with the find my phone app you must use the same account for ICloud ? If so how do I delete a current account to make it read as the other ICloud accounts?

    I'm setting up my devices with the find my phone app. I have accomplished setting up 2 devices. The third I can't setup because I can't change the iCloud account.
    My understanding from reading that the iCloud accounts must use the same name on all devices. How do I change that account in my phone settings?

    You don't have to use the same iCloud account in order to track all your devices.  You just have to sign into the iCloud account being used on the device you are trying to track in order to track it.  When you sign in on icloud.com and open Find My iPhone, you will see all the devices with Find My iPhone enabled that are using the account you signed in with.  To track a device using a different account, simply sign out, then sign back in using the ID the new device is using.
    The Find My iPhone app works the same way.  It will display devices based on the iCloud account you sign in with on the app.  To track a device using a different account, sign out, then sign back in with the iCloud ID that the new device is using.

  • I'm writing a report and need a title page, so I want the auto-numbering to start with the second page. So the title page is zero and the next page will read "1"

    I'm writing a report and need a title page, so I want the auto-numbering to start with the second page. So the title page is zero and the next page will read "1" How do I do this?

    Hi H4S,
    Click at the end of the Tile page.
    Menu > Insert > Section Break.
    Click in the second Section. Insert a page number in the Header or Footer.
    Inspector > Layout > Section:
    Regards,
    Ian.

  • 802.1x with the 6901 IP Phones

    Hello Experts,
    We  are testing the 802.1x with the 6901 IP Phones. And we can see on ACS  "EAP Session Timeout" In the logs, and cansee that the EAP Username used  by the phone is CP-6901-SEPB8BEBF220041.
    How ever following issues are stopping us to deploy it fully.
    How to enter password in IP Phone since It does not have LCD screen.
    Wetried IVR option, but it gives pin as an option, Is this Pin used as passwordfor 802.1x authentication.
    Dowe use any default password for this to work.
    Thanks in advance for the help.
    Regards
    Ronak Patel

    Overall, you need to try and deal with the fact that a machine can disappear from the network and the network may not know about it directly (i.e. Link doesn't go down).
    I have no idea what other phones do, but Cisco phones send an EAPOL-Logoff when something is unplugged. This lets the switch know directly, and 1X session start is torn down immediately, closing what would be a security hole.
    Fundamentally, re-auth is a workaround only, and this is not the reason to enable re-auth to begin with.
    If your phone doesn't send an EAPOL-Logoff in this case, the switch might be left thinking an attack is underway when someone else tries to plug in (with presumably a different MAC). You do NOT want this to occur.
    Hope this helps,

  • I had a very bad experience with apple maps. It is not at all useful. How such application is developed by apple I dont undersatand. Pl help me how to remove it from my Iphone. Vijay from Hyderabad. India

    I had a very bad experience with apple maps. It is not at all useful. How such application is developed by apple I dont undersatand. Pl help me how to remove it from my Iphone. Vijay from Hyderabad. India

    Tell Apple.
    http://www.apple.com/feedback/iphone.html

  • HT1206 i have had bad luck with computers laitly and have 5 pc allready authorised now i have a new one i cant authorise it so i can not access my itunes account can u deauthroise my pc from my accont so i can access it again

    i have had bad luck with computers laitly and have 5 pc allready authorised now i have a new one i cant authorise it so i can not access my itunes account can u deauthroise my pc from my accont so i can access it again
    <Email Edited by Host>

    http://support.apple.com/kb/HT1420

  • When I sign into iTunes for updates, a secondary username appears and I need to enter a password. I am not familiar with the second user name. Any Suggestions?

    When I sign into iTunes for updates, a secondary username appers and I need to enter a password. I am not familiar with the second username. Any suggestions?

    Are you using iTunes on your iPad or the actual program on a Mac/PC?
    If you are using on your iPad check the ID being used by going to Settings>iTunes & App Store if the Apple ID displayed isn't yours tap it and select Sign Out then sign in with your own Apple ID.
    If you are referring to iTunes on a Mac/PC select the Store Menu and check the Account Name next to the View Account text, if this isn't you select the Sign Out option directly above it then Sign In with the relevant credentials.
    Regards,
    Steve

  • How do I stop my ipod touch from cycling from the slide to unlock screen to the black screen with the cycling gear? It does this every two seconds.

    How do I stop my iPod touch from cycling from the slide to unlock screen to the black screen with the cycling gear? It does this every two seconds.

    If not successful try the remaining items of
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • My dv7 has a very bad warble in the audio after a recent automitic upgrade.

    My dv7 has a very bad warble in the audio after a recent automatic upgrade.  I have tried to revert the audio drivers back to a previous version but that has not helped.

    Hi Mikehow,
    May I please you to write which dv7 you exactly own (e.g. a dv7-6190)? You could also post your P/N (not the S/N, please) here.
    This would really help!
    Thanks!
    I am an HP employee.
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
    ***Click on “Kudos” STAR to say thanks!***

  • Hearing only with the left ear-phone!!!

    I can hear only with the left ear-phone!!! The ear-phones are working normally in others devices. I have already reset the I-Pod but it didn´t work at all. Is there a way to balance the ear-phones or the i-pod must be repaired?
    regards.

    Welcome to Apple Discussions!
    Have you tried using the iPod with other headphones. Do they work?
    btabz

  • I'm having bad luck with motherboards from Newegg.

    Hi all,
    I have successfully built several systems from the ground up with motherboards from Microcenter. However, I'm having no luck with the 2 motherboards i got from Newegg.
    The first one, ASUS P6T, would not reboot unless the reset button was pressed a few times. Then i ordered the GIGABYTE GA-EX58-UD5 X58. I had high hopes but it  too came out of the box with a problem. It start/stops/starts/stops.... I discovered that if i remove the 8pin power connecter, the mb starts but still will not post. I removed and replaced all components including the PSU and still no joy.

    The original PSU i got two weeks ago for the new system is a PC Power & Cooling (PP&C )910 watt unit. I think thats plenty of power. The PSU tester diaplays the following:
    +5V = 5.3
    -12V = 12.2
    +12V1 = 12.3
    +12V2 = 12.3
    +3.3V = 3.4
    5VSB = 5.3
    P.G. = 300ms
    I plugged the PP&C 910w PSU as well as a completely different 400w PSU into the GA-EX58-UD5 with the following components removed - no drives, cards or case fans and all drive/audio/usb connectors disconnected - just the i7 920 CPU and ram - the mb acted in the same manner.  Actually, its the PSU that's reacting to the motherboard i think. I can hear both  PSU's "click" like its tripping a breaker then resetting - hence the mb starting and stopping.
    Anyway, after i removed some and then all of the ram, the system started without stopping but still no post.  I have also been getting a debug error code of 62. From what i understand, the error code indicates that the motherboard is not recognizing the ram.
    It would appear that your both wrong in this case.
    I searched the internet and found some posts where either the bios has to updated to accept ram i have or the ram has to be replaced with something the GA-EX58-UD5 likes. In one post,  the current ram, Crucial DDR3 1066 (thats what i got), was replaced with Corsair XMS3 1333 ram and the system booted up.
    I'll keep you updated.

Maybe you are looking for

  • How can i change the color of the text bubble in Preview?

    Is it possible to change the colour of the text bubble in Preview?  In the Help section it seems to indicate you can but following the directions only puts a border around the bubble in the colour you have chosen.  The interior colour of the bubble d

  • Body of Email missing when pushed to phone using EAS

    I am using EAS and Mnotes5 from commontime to push/sync my emails, contact, tasks, and calendar from lotus notes 8.5 to my pre. I am having success for the most part with this setup, however, I have had occasions were the email downloads to the phone

  • OIM Design Console Invalid Login tcLoginException

    Dear All, While trying to login to OIM Design console using design console or using the API the following error is displayed: Error Keyword: DAE.LOGON_DENIED Description: Invalid Login. Remedy: Contact your system administrator. Action: E Severity: H

  • Linking and Unlinking Facebook from a Premium Account

    Hi, I have a premium Spotify account that I setup with a login that is not connected to facebook. I'm considering linking the account to my Facebook account (which I understand how to do I believe.) If I dislike the two being connected I'd like to di

  • Error initializing JDF library

    Every time I try to convert a word document to PDF from file while running Adobe Acrobat Professional 6.0 I recieve the error messeage "Error initializing JDF library." Then it acts like it is going to convert and the error messeage pops up nad Acrob