Very Bad performance when previewing song in iTunes 9 through new interface

Hi, Since upgrading to the new iTunes (9.0.2) I cannot preview the music any longer without many stops in the preview for the computer to re-buffer the download. There are so many that you cant listen to the song as you only get clips that seem to be less than a second long.
Before upgrading to 9 the previews played perfect. I then also went out to my AppleTV and tried to preview music which played perfect with no stops.
On further investigation in iTunes I recognized that if I go to the Browse area of iTunes (4 buttons down under your name where it says Welcome (and your name) on the Main menu of the iTunes store (not in music or movies etc)) I can still preview songs perfect with no interruptions! This area (the browse area) still displays music in the old way that iTunes 8 did with blue and white strips separating each song and the old buy buttons.
So the problem seems to only be happening in the areas of the iTunes store that has the new feature set in iTunes 9 for displaying and previewing music.
I also tried to go into the preferences to see if I could set settings to download the whole preview first before playing but that has been removed.
Finally I was in a hotel last week and tried to preview music and it worked fine in the preview. However, I find it hard to believe that it is a speed problem in my house since the ATV works perfect and the previews in the browse area play perfect.
This problem is happening on my home iMac / my Power book (3 years old) and my sons power book (1 year old). I am also up-to-date with all updates from the system side.
Any suggestions?
Alfredo

I have the same issue. It wasn't this bad until recently and my bandwidth has increased if anything. Terribly annoying. It very adversely affects my iTunes store experience and encourages me to look elsewhere for music.
Yes, I have the buffer control set to large. Why don't they have an option to download the whole preview before playing like they used to?
Any solutions?
Message was edited by: John Cover

Similar Messages

  • Have just install itunes on a new PC running windows 8 and I am getting very bad distortion when playing music, any ideas

    Have just install itunes on a new PC running windows 8 and I am getting very bad distortion when playing music, any ideas. Music on web (youtube) is working fine.

    Use a different browser.
    iTunes can only be installed and run in desktop mode.

  • TS3297 I keep getting the error 306 cannot connect to the iTunes Network when downloading songs on iTunes. I've tried all the troubleshooting steps from the forums and my technical issues are still unresolved. I have Windows 7. Please help!!

    I keep getting the error 306 cannot connect to the iTunes Network when downloading songs on iTunes. I've tried all the troubleshooting steps from the forums and my technical issues are still unresolved. I have Windows 7. Please help!!

    iTunes Store loads partially or returns "Error 306" or "Error 10054"
    Proxies, parental control settings and software, security or filtering software, or a bad iTunes Store cache can cause this.
    To address proxies, Remove Internet Options proxy settings  ( http://support.apple.com/kb/TS1490 ) and connect to the Internet without a proxy.
    To reset iTunes Store cache:
    In iTunes, choose iTunes > Preferences (Mac) or Edit > Preferences (PC).
    Click the Advanced tab.
    Click the "Reset cache" button.
    Click OK and see if the issue is resolved.
    Adjust Parental Controls in iTunes:
    Open iTunes.
    Access iTunes preferences:
    On a Mac: From the iTunes menu, choose Preferences.
    On a Windows PC: From the Edit menu, choose Preferences.
    Click the Parental Controls tab.
    Remove restrictions on Parental Controls.
    For more information on parental controls or content filtering software, see iTunes 10.5 for Windows: May see performance issues and blank iTunes Store.
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • Issue Previewing Songs in iTunes Store

    When previewing songs in the iTunes store only 5-10 secs play instead of the full 90 secs.  Anyone know how to fix this?I

    1. Use these DNS: Google and Verizon DNS
    Primary DNS = 8.8.8.8 Secondary DNS = 4.2.2.1
    2. Then apply these instructions:
    Windows XP
    On the Start menu, click Run.
    In the Open field type cmd and click OK.
    In the resulting window, type ipconfig /flushdns and press Return(Enter) on the keyboard.
    You should see a message that the DNS Resolver Cache has been successfully flushed.
    Windows Vista and Windows 7
    On the Start menu, point to All Programs > Accessories and then right-click Command Prompt and choose Run as Administrator from the shortcut menu. If Windows needs your permission to continue, click Continue.
    In the resulting window, type ipconfig /flushdns and press Return(Enter) on the keyboard.
    You should see a message that the DNS Resolver Cache has been successfully flushed.
    Your problem should be 100% solved

  • VERY Slow Respons When Changing Songs on iPod

    My work computer is a Windows Vista machine, with Vista, SP 2 installed. I installed iTunes 8.2.0.23 this morning, upgrading from version 8.1.1.10. The new version works well when I play songs stored to the library on my hard drive, but I find that it has a VERY slow response when changing songs that I play from my iPod Touch. At one point, it took 17 seconds to change to the next song in the iPod's library. It changes instantaneously when I play songs from the library stored on my HDD. The iPod Software is version 2.2.1.
    Can someone please offer insight?
    Is there a way to download and install iTunes 8.1.1.10? I had no problems with that version.

    Hi Ajrobin,
    Welcome to Apple Discussions
    [deleted because misread original post]
    Jon
    [btabz...funny...wait never... ;)]
    Mac Mini 1.42Ghz, iPod (All), Airport (Origional & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more...  Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..
    Message was edited by: ~JB~

  • When loading songs into iTunes, from my external hard drive. It seems to be copying the music onto my MacBook Air.

    When loading songs into iTunes, from my external hard drive. It seems to be copying the music onto my MacBook Air.
    How do i have iTunes only read the songs from my hard drive, rather then copying them?

    You may find these Links of Interest...
    Moving iTunes Media Folder
    http://support.apple.com/kb/HT1449
    http://macmost.com/moving-your-itunes-media-to-an-external-drive.html

  • When adding songs to Itunes library, itunes stops working

    When adding songs to itunes library it stops wokring and itunes closes.

    I'm having the exact same problem and I came to this forum seeking the answer.
    To go into more detail, the problem occurs when you click on 'Add File to Library', then select multiple songs from a folder using the CTL key. You can add tracks individually with no problem. Use CTL to choose two or three tracks, that works fine, too. But if you choose more than that, nothing gets added to the Library.
    If I had to guess, I'm thinking it might have something to do with the total number of characters allowed (on the selected tracks) before the 'Add to Library' pop-up form basically fails to work properly. I've also noticed the magic number of selected tracks to be somewhere in the 3-4 range before it doesn't work.
    It definitely feels like a software bug and I've experienced it in more than one version of iTunes, including the current release. I'm hoping Apple will recognize and fix it sometime soon. Having to go into the same folder three or four times to import 10 or more tracks from the same album is pretty irritating.
    Message was edited by: MisterGee
    Message was edited by: MisterGee

  • InDesign CC 2014 very slow performance when dragging images and changing text

    InDesign CC 2014 very slow performance when dragging images and changing text.
    Running on 2010 Macpro 2.4GHz. 8GB RAM. Any solutions? I've read through many forums on this and tried several fixes.

    Have exact same issue on  my Windows 7 machine. Resetting preferences is a workaround.
    So I start InDesign whilst holding down these keys.
    Ctrl + Alt + Shift (Windows) or Cmd + Ctrl + Opt + Shift (Mac)
    Whilst inDesign is usable again with this fix- I have to do it every time so it trashes all my preferences so NOT GOOD long term fix. Otherwise InDesign freezes and can only be stopped by forcing a quit.
    I have manually deleted the preference files and I have created a brand new admin account - but still no luck - will be onto support tomorrow

  • When playing songs in iTunes playlist, How do you keep the next song from jumping to next song? I am working on song list updating other tracks info and then the next song starts and I lose my spot in song list?

    When playing songs in iTunes playlist, How do you keep the next song from jumping to next song? I am working on song list updating other tracks info and then the next song starts and I lose my spot in song list?

    Max OSX 10.6.8, iTunes 11.1
    I had a similar problem: I wanted to synch my playlist to my iphone. I like to have my playlist sorted by genre. But under each genre, albums are not sorted by the track numbers. This is a problem, especially when I am listening to club mixes when the DJ smoothly transitions from 1 track sequentially to the next one. Under the properties of each audio file, the Track Numbers and Disc Numbers are already there.
    My perfect solution was to turn On Sorting - Sort Album under View>Show View Options. Then, select all the songs in that album (Shift click, Cmd click, etc) , and Edit multiple item information (Cmd I). You will see Info-Video-Sorting-Options buttons. Click on Sorting. Then, under Sort Album, Enter the name of the album. Then OK.
    You should now have the playlist sorted by Genre, then each album individually sorted by track numbers. On your playlist you should see, if you scroll right, the column added called "Sort Album".
    Hope this helps.

  • I just bought a new iphone, how do i get my songs from itunes onto the new phone?

    i just bought a new iphone, how do i get my songs fron itunes onto the new phone? when i log into itunes, none of my songs are there...

    Are you saying your iTunes doesn not have your songs?  If not, where would they be?  If on an older iphone, then they should have gotten there via itunes and itunes has them.

  • I am getting the message "The windows installer Service could not be accessed when trying to install Itunes on my new computer, any help would be appreciated.

    I am getting the message "The windows installer Service could not be accessed when trying to install Itunes on my new computer, any help would be appreciated.

    Hey there Frank0619,
    If you have not been able to install iTunes because the Windows Installer service is not available, I would recommend the troubleshooting in the following troubleshooting to help.
    Issues installing iTunes for Windows
    These in particular: 
    Make sure you have an administrator account.
    To install iTunes, you'll need to log in to your computer with an administrator password. If you're not sure if you have an administrator account, read Windows 7: How do I log on as an administrator? You could also refer to your computer's help system, contact your IT department, or visit support.microsoft.com for assistance.
    Install the latest Microsoft Windows updates.
    To download the latest updates, visit the Microsoft Windows Update website. iTunes for Windows requires Windows XP, Windows Vista, Windows 7, or Windows 8 with the latest Service Pack installed. If you can’t install the updates, refer to your computer's help system, contact your IT department, or visit support.microsoft.com for assistance.
    Download the latest version of iTunes.
    The latest version of iTunes can be downloaded at http://www.apple.com/itunes/download/.
    Disable conflicting software.
    Some Windows background processes can cause issues for other programs and processes. These conflicts can prevent applications, such as iTunes, from installing. Disable conflicting processes by starting your computer using MSConfig: 
    Using Msconfig to troubleshoot conflicts in Windows XP
    Using Msconfig to troubleshoot conflicts in Windows Vista, Windows 7, and Windows 8
    Some security software made by other companies can't be disabled using MSConfig. If you've installed security software and you're having issues installing iTunes or QuickTime for Windows, you might need to disable or uninstall security software to resolve installation issues.
    Restart your computer.
    Install iTunes.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • I have switched offices and computer. may I still access my old tunes? next, I get an error when trying to download Itunes to my new compuet: c:\DocumentsandSettings\aabugattas\desktop\itunessetup.exe is not a valid Win32 application  How can i download i

    I have switched offices and computer. may I still access my old tunes? next, I get an error when trying to download Itunes to my new compuet: c:\DocumentsandSettings\aabugattas\desktop\itunessetup.exe is not a valid Win32 application  How can i download it?

    In the course of your troubleshooting to date have you worked through the following document?
    iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application"

  • Old computer crashed. How do I not lose my music on my Ipod when I sync with iTunes on the new computer?

    Old computer crashed.  How do I not lose my music on my Ipod when I sync with iTunes on the new computer? 

    Copy everything from your backup copy of your old computer to your new one

  • Why do I have to change source input to mono when it's recorded in stereo through my interface from an acoustic pick up in order to hear anything in playback?

    Why do I have to change source input to mono when it's recorded in stereo through my interface from an acoustic pick up in order to hear anything in playback?
    It's a dean markley acoustic pick up with a mono 1/4" jack. It's plugged into a focusrite interface. GarageBand only records it in stereo and only plays it back in mono.

    Watts100woo wrote:
    with a mono 1/4" jack. It's plugged into a focusrite interface. GarageBand only records it in stereo and only plays it back in mono.
    you appear to already know the answer, however...
    GB is not recording it in stereo, nor could it
    the short story:
    http://www.bulletsandbones.com/GB/GBFAQ.html#leftspeakeronly
    (Let the page FULLY load. The link to your answer is at the top of your screen)
    the long story:
    http://www.bulletsandbones.com/GB/Tutorials.html#bsqstereovsmono
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • RAZR V3i is very slow when syncing songs with iTunes

    My V3i use to sync songs with iTunes pretty fast, but after updating iTunes it syncs very slow, and half the time just hangs.
    Is anyone else having this issue? Any tips?
    Thanks!

    iTunes stalls loading a mp3 on my phone when that mp3 is currently being played.
    <Edited by Moderator>

Maybe you are looking for

  • Error when scheduling a workbook

    Has anyone come accross this error before when scheduling a workbook thru the Scheduling Manager in Discoverer Plus 10gR2? "Exceeded maximum query size". All worksheets run to a sucessful completion when you run them one at a time. Thanks Brent

  • Changing RFx phase though scripting

    Hello Experts, I am trying to change the phase of an RFx document from "Waiting For Approval" to "Open For Review" through a script. The actual requirement is that incase an approver attempts to approve a document once the date has passed the system

  • ORA-1403 when accessing table SAPUSER

    Hi all, I was performed  from Windows 2003 R2 32bit to Windows 2008 R2 64bit for Homogeneous system copy for SAP ERP 6.0 SR2. I occure error during Importing on Windows 2008 R2 64bit using sapinst.exe of Install Master ERP 2005 SR2. Source system : W

  • Is the data entry bar gone?

    It appears that data entry is only possible directly in cells now rather than being able to enter it in the bar at the top of the spreadsheet as in Numbers '09? This is unfortunate. I've always used that space to paste text from webpages and other pr

  • Admin privileges?

    I am trying to disable the access to publish reporting in OBIEE 11g for one user group and add that to another user group. Can someone please help me which component under privileges should i need to look into