Very basic initial configuration question.

Hi.
I replaced a Catalyst 2960G for a C2960X-24-L in a network where there are already five switches.
I have no idea how to assign it an ip : is there anyone here willing to explain that in very simple way ?
I tried plug it in the existing network, but didn't work.
I'm not the one whom installed the network, and I'm doing that to help.
Thank you.
Pierre

Also if you are adding a new sw to the network i recommend you to reset the vtp in that sw (if your network has it.) if you are not sure just do "vtp mode transparent" "vtp mode client" assuming that you are replacing a client sw.
Then you should verify before connecting to the network:
- type of stp that your network is running
- if you have vtp check the config and use the same domain, version, password so the sw gets the vlans from the
- when you have all the vlans set in the sw then add the interfaces to the vlans
- be sure that you are not replacing the root sw.
Maybe there are others things to check but thats what comes to my mind now
Regards

Similar Messages

A very basic editor related question

Dreamweaver is considered a versatile & matured HTML editing tool, but (surprisingly) I could not find a very basic HTML editing facility in Dreamweaver (which is found in some free tools like Aptana Studio).
In the code editor, if I click on a HTML (starting) tag, the editor should highlight the end tag, but the Dreamweaver editor does not do that? Am I missing anything?
(I am using Dreamweaver CS3)

In Code View you have some icons on the left side of your screen. These can be used to expand and collapse sections of code for easier viewing.
< > Select Parent Tag. See screenshot.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com

3355 initial configuration question

When I am setting up the 3355 MSE I have a question about the second ethernet interface. I am not using HA. Can I assign the same IP address to the second port as I do to the first port or does it have to have a seperate address? I noticed in the Prime that when you add the MSE it only asks for one IP address.

So I have a question regarding the port configurtion.
In the autoconfiguration script there is an e0 and e1. However, on the back of the physical box there is a IMM, e1 & e2. I have configured e0 only via the script. But when I ping the default gateway it is reaching out with 1.1.1.10. Even though I have configured it with the correct IP.
I tried to move the cable to the IMM port with no success. I tried E2 with same results.
The startup config is minimal in terms of explaining what each does.
Any idea what physical port e1/2 maps to e0/e1 in the startup configuration and what should be configured and where the cable should be plugged in? No HA setup here. Just a straight IP connection into our network for communication with NCS Prime..
Regards

Very basic Objective-C Question

Okay, I am completely new to Objective-C so forgive me.
I am trying to run a command when the MainView is initially loaded, so I figured I would need to override the constructor. I tried overriding init and initWithFrame, but it didn't work.
How can I get a command to run (sendDate = [NSDate date];) when the UIView is initially loaded?
Thanks a bunch.

Let's take a step back for a second. Are you using Interface Builder (IB) with XViewController?
Usually with a UIViewController there is no separate UIView class. At least not with the code I've written. A view controller creates its own view. If using IB then the view is created from the XIB file. There is no actual UIView class on the file system or in your project.
So what ends up happening is the UIViewController loads the view and the view controller's 'viewDidLoad' method gets called. It is usually here that you finish off setting up the view. You access the view using 'self.view' inside the view controller code.
But you seem to have an actual class named MainView that is a UIView. And it appears that class has an instance variable of 'sendDate'. Did you create this class by hand? If so then you must have explicit code for creating it. Where is this code?
This is one of those details that I could explain is 5 seconds in person after seeing what you were doing. But online I can't, of course, see what you are really doing.

Very Basic ISA 2006 Question

I am the first to admit that I don't really know anything about ISA....so please forgive me if this question is too stupid for words.....(and if a particular MVP with the initials 'AF' is reading this, then yes, I know I am incredibly stupid and shouldn't have
anything to do with networks, and me posting to these forums is an offence to your sensibilities etc etc, so spare me the rant this time...)
Anyway, I was under the impression that with ISA server you could have a number of web sites all running off the same IP address. For example, we have 2 websites (site1.company.com and site2.company.com) and 1 external IP address. We have DNS records set up
for each of these sites, and they both point to our external IP address. What I thought happened (in my incredibly uneducated mind) was this
1. User types www.site1.company.com into their browser, which resolves to our external IP address on our firewall. Our firewall forwards this request to our ISA s2006 server. The ISA server reads the 'site1.company.com'
in the request and forwards the traffic to webserver1.
2. User types www.site2.company.com into their browser, which resolves to our external IP address on our firewall. Our firewall forwards this request to our ISA s2006 server. The ISA server reads the 'site2.company.com'
in the request and forwards the traffic to webserver2.
Are my assumptions correct, or do we need a public IP address for every site we wish to publish?

Hi,
you are correct. It is possible to publish multiple websites with one public IP address:
http://support.microsoft.com/kb/838252/en-us
http://blogs.technet.com/b/isablog/archive/2008/06/19/another-look-at-web-publishing-part-ii-host-headers-with-ssl-and-certificates.aspx
regards Marc Grote aka Jens Baier - www.it-training-grote.de - www.forefront-tmg.de - www.galileocomputing.de/3570

Very basic user, simple question (i think)

Hi there,
Very new to dreamweaver, im making a website at the moment, what i dont understand is i have a set template, which i have used for about 6 pages within the website. On all the pages it is very zoomed in when i preview it in chrome, apart from one page, this page looks perfect, its in perspective and everything isnt too large like on the others. Is there a way i can make them all follow this one?
Nevermind that, sorted that
How do i set the zoom of the page, so when anyone goes onto the page it appears in the correct zoom, rather than far too zoomed in like it does now

Newtimething wrote:
Nevermind that, sorted that
How do i set the zoom of the page, so when anyone goes onto the page it appears in the correct zoom, rather than far too zoomed in like it does now
Not a clue what your'e talking about. Is the browser set to zoomed by default? Sometimes it can be set in the last position you use it at so you need to re-set it, that' a possibility

Very basic SQL/XML question

I'm using the following environment:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
However, I don't think my environment is the issue.
I'm trying to get output which looks like this from a simple table:
<MAXDOMAIN action="S">
     <DOMAINID key="true">domainid_data</DOMAINID>
     <SYNONYMDOMAIN type="relationship" action="AU" >
          <VALUE key="true">value_data</VALUE>
          <MAXVALUE>maxvalue_data</MAXVALUE>
          <DESCRIPTION>description_data</DESCRIPTION>
          <DEFAULTS>defaults_data</DEFAULTS>
     </SYNONYMDOMAIN>
</MAXDOMAIN>The table looks like this
Name                           Null     Type
DOMAINID                       NOT NULL VARCHAR2(30)
DESCRIPTION                             VARCHAR2(50)
DOMAINTYPE                              VARCHAR2(5)
MAXTYPE                                 VARCHAR2(5)
LENGTH                                  VARCHAR2(5) The real question is how do I get an element with attributes to also have content.
<DOMAINID key="true">domainid_data</DOMAINID>and
<VALUE key="true">value_data</VALUE>I'm not sure if I'm syntactically challenged or just not using the correct tags.
If I try to just generate the first two tags, forgetting the following nesting, I'm OK, as long as I don't try to assign attributes to the DOMAINID tag:
SELECT XMLELEMENT
("MAXDOMAIN",XMLATTRIBUTES('S' AS "action"),XMLELEMENT(NAME DOMAINID, "DOMAINID")
AS "RESULT"
FROM FAC_MAXDOMAIN;This works and is pretty trivial.
<MAXDOMAIN action="S"><DOMAINID>AIRFLOWTYPE</DOMAINID></MAXDOMAIN>
etc, etc...However, this:
SELECT XMLELEMENT
("MAXDOMAIN",XMLATTRIBUTES('S' AS "action"),XMLELEMENT(NAME DOMAINID, "DOMAINID",XMLATTRIBUTES('true' AS "key"))
AS "RESULT"
FROM FAC_MAXDOMAIN;Yields an ORA-00907: missing right parenthesis error.
Any ideas? maybe a good primer on SQL/XML might be the best solution...
TIA,
Paolo

Very nice for a first post in terms of data included and formatting.
It took me a few minutes to see it, but the simple answer is you are putting the XMLAttributes in the wrong location. See the XMLElement spec at http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/functions220.htm#SQLRF06168 that shows XMLAttributes comes between the identifier and value. So that means you should have written it as
Connected to Oracle Database 11g Enterprise Edition Release 11.1.0.6.0
SQL> WITH FAC_MAXDOMAIN AS
2 (SELECT 'domainid_data' domainid, 'dscr' description,
3          'type' domaintype, '10' maxtype, '5' length
4     FROM dual)
5 -- Using WITH so didn't have to create your table locally
6 SELECT XMLELEMENT("MAXDOMAIN",
7            XMLATTRIBUTES('S' AS "action"),
8            XMLELEMENT(NAME DOMAINID, XMLATTRIBUTES('true' AS "key"), "DOMAINID")
9          )
10 AS "RESULT"
11 FROM FAC_MAXDOMAIN;
RESULT
<MAXDOMAIN action="S"><DOMAINID key="true">domainid_data</DOMAINID></MAXDOMAIN>

A very basic sql xml question..

I want to print only two rows group by grup number so there are only two group numbers
0 and 1...
so 0 group should have two items...
Elapsed: 00:00:00.01
15:15:55 SQL>
15:15:56 SQL> l
1 with data as
2    (select 0 as grp,'A' item_name , 'XX' Item_desc from dual
3     union
4      select 0 ,'B' , 'XY' from dual
5      union
6      select 1 ,'B' , 'Y' from dual
7       )
8 select xmlelement(name "grp",
9            xmlforest(grp "item_name",item_name)
10            )
11* from data
15:15:57 SQL> /
XMLELEMENT(NAME"GRP",XMLFOREST(GRP"ITEM_NAME",ITEM_NAME))
<grp><item_name>0</item_name><ITEM_NAME>A</ITEM_NAME></grp>
<grp><item_name>0</item_name><ITEM_NAME>B</ITEM_NAME></grp>
<grp><item_name>1</item_name><ITEM_NAME>B</ITEM_NAME></grp>
Elapsed: 00:00:00.01

Hi,
You should use XMLAGG, to get everything into a single XML element. And DON'T use extract()!!
Something like:
SQL> declare
   xml   xmltype;
begin
with data as
    (select 0 grp, 'g1' grp_name, 'A' item_name, 'XX' item_desc from dual union all
     select 0    , 'g1' grp_name,'B'          , 'XY'           from dual union all
     select 0    , 'g2' grp_name,'B'          , 'XY'           from dual union all
     select 0    , 'g3' grp_name,'B'          , 'XY'           from dual union all
     select 1    , 'g1' grp_name,'B'          , 'Y'            from dual)
-- end of test data
     select xmlagg(xmlelement("GRP"
                             ,xmlagg(xmlelement("ITEM_NAME", item_name))
                             ,xmlagg(xmlelement("item_desc", item_desc))))
       into xml
       from data
   group by grp, grp_name, item_name;
   dbms_output.put_line(dbms_lob.getlength(xml.getclobval()));
end;
299
PL/SQL procedure successfully completed.Regards
Peter

Scripting Question - Very Basic

Hello, I'm using the trial version of InDesign and am wondering if because it's the trial version that I can't load custom scripts from Adobe? I've downloaded and installed a Custom Calendar script [I can see the extracted files in/on my PC] but the app apparently doesn't see it. Any help you can offer is greatly appreciated. Thanks,

Thank you so much, you were spot on.
From: Peter Spier <[email protected]>
To: Friar5 <[email protected]>
Sent: Monday, December 12, 2011 3:18 PM
Subject: Scripting Question - Very Basic
Re: Scripting Question - Very Basic created by Peter Spier in InDesign - View the full discussion
Have you put thew script in a location that InDesign uses for scripts? See How to install scripts in InDesign | InDesignSecrets
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4079869#4079869
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4079869#4079869. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in InDesign by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Basic Hyperion Workspace question

Is there any way to Drill-Down to data by double-clicking on the chart item in Hyperion Workspace? I can do this in Hyperion Reporting Studio.

hi all,Hi Neerav
I have very basic clone database question
If i create database A and clone database B using A...
I want to know that any operation done on A will be automatically done on Cloned database B.Oops....Now you're asking about rocket science. Sorry, I don't know.
I know about some basics:
Streams or Replication--> Which can give you data on B in read-write mode.
DR--> For safeguarding your database and B will work as DR solution.
Hope u understandNo, please make us understand.
Regards,
S.K.

Basic recording/feedback question

I'm recording basic vocals against accompaniment tracks using an APOGEE ONE and Audio-Technica 40 series AT8449 condenser mic. I use only headphones, no external speakers.
If I record with "monitoring" on I constantly battle feedback/distortion, especially on songs with a wide dynamic range. When the feedback protection kicks in the message indicates that I'm getting feedback through my external speakers (which I don't have), I can minimize the problem by turning "monitoring" off but I lose the reference vocal. I know I must be overlooking something very simple. Any help is appreciated.

hi all,Hi Neerav
I have very basic clone database question
If i create database A and clone database B using A...
I want to know that any operation done on A will be automatically done on Cloned database B.Oops....Now you're asking about rocket science. Sorry, I don't know.
I know about some basics:
Streams or Replication--> Which can give you data on B in read-write mode.
DR--> For safeguarding your database and B will work as DR solution.
Hope u understandNo, please make us understand.
Regards,
S.K.

Basic PDF/SSL Question

Okay, I know this is a basic question, and I'm not sure if this is really where I should be posting it, but maybe someone out there has experience with this.
I have a PDF form sitting on a secure server. I have it set up to email the completed PDF back to our company when the user clicks the SUBMIT buttton. Whether or not the PDF is secure coming back to us would be dependent on the email server the user uses - not that the form sits in a secure area on our server or that the PDF is security settings are set, correct?
Any input appreciated.
Thanks
Q

hi all,Hi Neerav
I have very basic clone database question
If i create database A and clone database B using A...
I want to know that any operation done on A will be automatically done on Cloned database B.Oops....Now you're asking about rocket science. Sorry, I don't know.
I know about some basics:
Streams or Replication--> Which can give you data on B in read-write mode.
DR--> For safeguarding your database and B will work as DR solution.
Hope u understandNo, please make us understand.
Regards,
S.K.

Basic Clone database question

hi all,
I have very basic clone database question
If i create database A and clone database B using A...
I want to know that any operation done on A will be automatically done on Cloned database B.
Hope u understand
Thanks,
Neerav

hi all,Hi Neerav
I have very basic clone database question
If i create database A and clone database B using A...
I want to know that any operation done on A will be automatically done on Cloned database B.Oops....Now you're asking about rocket science. Sorry, I don't know.
I know about some basics:
Streams or Replication--> Which can give you data on B in read-write mode.
DR--> For safeguarding your database and B will work as DR solution.
Hope u understandNo, please make us understand.
Regards,
S.K.

FTP question; very basic

I don't know how to configure FTP File Transfer to start an upload to web.
Where do i get the information to fill in the fields??
Please help

thank you Mike
I¹ve heard of zenfolio and will revisit them.....I just wish it was easier
to use Lightroom....one stop shopping is so seductive.
nancy
From: MikeLeone <[email protected]>
Reply-To: <[email protected]>
Date: Tue, 08 Dec 2009 15:15:44 -0700
To: Nancy Dinoto <[email protected]>
Subject: FTP question; very basic
John Vitollo had this to say:
Do you have a website and/or do you own your own domain name... such as
http://forums.adobe.com/people/nancy7147.com? You'll need a website hosting
company to serve your website to the world.
Depends on your ISP. I'm a Comcast cable customer; they allow me to have
a personal website. I could use that space to do it.
In my case, I have a Flickr pro account. When it expires, I will
probably move to Zenfolio, as I like their presentation much better. I
can't use LR slideshows with Flickr or Zenfolio, but that's not a
deslbreaker for me.

Questions on the very basics of setup

I'm helping a "friend" setup his MacBook Pro (a likely story, I know). he has an AirPort Extreme and wants to connect to the internet using his DSL box. All the cables are correctly connected, I believe. Went through the procedure of using the AirPort Setup Assistant (creating network i.d., password, etc.). When we click "connect", the left AirPort light flashes periodically as it's supposed to, but we get the following message after a few moments:
"could not find a PPPoE server"
I presume that means that we need to install the DSL software on the machine. Is that correct? Should this be an "easy" fix or do I have to consider other things in order to get to the internet?
I do apologize if this is a re-run question, but I didn't see it in the forum. Thanks for any guidance or reference to other links in the forum.....

Just as a hunch, and I'm new to this support site as well, but I'd go check out the Airport Forums, and see if there is this info in there already. That being said, from what I understand and have experienced, some adsl modems work in dummy mode, where the router/airport device actually prompts the information through it, and some have their own dhcp server with all that username/password,ect, stuff in there. One thing you may have to do is connect the modem directly to your ethernet port on your computer, and go into your webbrowser and type "192.168.1.1" into the address bar and press enter, this should give you your dsl modems configuration page, from there you'll have to figure out which option you can go with. What i've seen a few times is a modem that has to have the username and password setup, and also has basic network configuration, and then a router, which has to be setup for dhcp as well, with no username and password info involved. What makes this more confusing, is sometimes both the router and the modem are set to use the same default address for themselves. Try checking out the documentation on both the airport, and whatever information you can glean from your isp about your modem. If this all sounds like nonsense to you, I'd just check into paying your isp to send someone to set it up, or some other knowledgeable networking tech. Good luck

Very basic initial configuration question.

Similar Messages

Maybe you are looking for